Peter's Model Railroading - Keyword Index

0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9

A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z

Click on the keyword of interest, to see on which pages it occurs. You can then follow that link to the actual page for further reading.

g"-shaped
Magazine Articles By Doug Geiger
... HO Description: Fred Carlson's G&NH "G"-shaped layout models the Upper Peninsula of Michigan...

Magazine Articles By Category: Layouts - HO - Large
... HO Description: Fred Carlson's G&NH "G"-shaped layout models the Upper Peninsula of Michigan...

Model Railroading 2000-11/12 Articles
... HO Description: Fred Carlson's G&NH "G"-shaped layout models the Upper Peninsula of Michigan...

Magazine Articles for HO Scale
...- Large Description: Fred Carlson's G&NH "G"-shaped layout models the Upper Peninsula of Michigan...

g&d
Magazine Articles By Jim Findley
...article includes a trackplan of the final G&D. Shown are the floor-to-ceiling scenery. The article...

Magazine Articles By Category: Layouts
...article includes a trackplan of the final G&D. Shown are the floor-to-ceiling scenery. The article...

Railroad Model Craftsman 1980-12 Articles
...article includes a trackplan of the final G&D. Shown are the floor-to-ceiling scenery. The article...

Magazine Articles for HO Scale
...article includes a trackplan of the final G&D. Shown are the floor-to-ceiling scenery. The article...

g&nh
Magazine Articles By Doug Geiger
...Scale: HO Description: Fred Carlson's G&NH "G"-shaped layout models the Upper Peninsula of...

Magazine Articles By Category: Layouts - HO - Large
...Scale: HO Description: Fred Carlson's G&NH "G"-shaped layout models the Upper Peninsula of...

Model Railroading 2000-11/12 Articles
...Scale: HO Description: Fred Carlson's G&NH "G"-shaped layout models the Upper Peninsula of...

Magazine Articles for HO Scale
...HO - Large Description: Fred Carlson's G&NH "G"-shaped layout models the Upper Peninsula of...

g-scale
Future Layout - Givens
...and I never really cared for HO-scale. G-scale has some appeal, but it is not...

Model Railroading Scales
... 1 foot = 7/8" Uses G-scale track. 1:20.3...

... F-scale Fn3 proper Uses G-scale track as 3-foot narrow gauge track....

...track. 1:22.5 G-scale European meter gauge Uses G-scale...

...G-scale European meter gauge Uses G-scale track, where track spacing is a scale...

...Half scale Uses G-scale track. Compromised narrow gauge....

... 1:29 Common G-scale Uses G-scale track...

...Common G-scale Uses G-scale track as scale standard-gauge track at a...

...compromise. 1:32 G-scale/One Gauge Uses G-scale...

...G-scale/One Gauge Uses G-scale track. Correct scale for common G-scale track....

...Uses G-scale track. Correct scale for common G-scale track. 1:48...

Magazine Articles By Al Buchan
...photos covering N, HO, S, O, and G-scale models. Overview of the NX23 Class Magazine:...

Magazine Articles By Carl Arendt
...designs, builds, and then operates his tiny G-scale layout that covers only one square foot....

Magazine Articles By George Hall
...he started in N-scale, he quickly discovered G-scale and now runs live steam locomotives on...

Magazine Articles By Keith Koch
...Koch 07/05/2014 G-scale On The Move Magazine: Model...

... A group of people who create G-scale portable modules.

Magazine Articles By Ken Ducat
...story about how two people built a G-scale layout in a mall.

Magazine Articles By Michael Tylick
...the author builds his modules for his G-scale modular layout. The techniques shown build a...

Magazine Articles By Rene Schweitzer
...by a good number of F- and G-scale figures.

Magazine Articles By Category: Garden Railroading
...he started in N-scale, he quickly discovered G-scale and now runs live steam locomotives on...

Magazine Articles By Category: Layout Construction
...designs, builds, and then operates his tiny G-scale layout that covers only one square foot....

...the author builds his modules for his G-scale modular layout. The techniques shown build a...

Magazine Articles By Category: Layouts
...of the layout in a peninsula area. G-scale On The Move Magazine: Model...

... A group of people who create G-scale portable modules. Gilpin & Blackhawk Magazine:...

Magazine Articles By Category: Model Railroads and People
...photos covering N, HO, S, O, and G-scale models. Ferroequinology at ICU - 1981 Version...

...story about how two people built a G-scale layout in a mall. Lionel's Favorite Web...

Magazine Articles By Category: Scenery - People & Animals
...by a good number of F- and G-scale figures. Buck the Trend: Build a Fence...

Garden Railways 2005-12 Articles
...by a good number of F- and G-scale figures. The Woodland Railway Page: 66...

Model Railroader 1984-12 Articles
...story about how two people built a G-scale layout in a mall. Snow at Condor...

Model Railroader 2000-04 Articles
...he started in N-scale, he quickly discovered G-scale and now runs live steam locomotives on...

Model Railroader 2003-02 Articles
...replacing the motor with a smaller one. G-scale On The Move Page: 102 Author:...

... A group of people who create G-scale portable modules. Getting Started in Prototype Research...

Railroad Model Craftsman 2009-11 Articles
...the author builds his modules for his G-scale modular layout. The techniques shown build a...

Scale Rails 2005-11 Articles
...designs, builds, and then operates his tiny G-scale layout that covers only one square foot....

The Keystone Modeler 60 July 2008 Articles
...photos covering N, HO, S, O, and G-scale models. PRRPro Class X31 Preliminary Feature Page:...

Magazine Articles for G Scale
...designs, builds, and then operates his tiny G-scale layout that covers only one square foot....

...operators busy, such as the famous TimeSaver. G-scale On The Move Magazine: Model...

... A group of people who create G-scale portable modules. Gary Mittner’s 1:29 Scale Class...

...he started in N-scale, he quickly discovered G-scale and now runs live steam locomotives on...

...story about how two people built a G-scale layout in a mall. Mack Trucks Magazine:...

Magazine Articles for Large Scale Scale
...by a good number of F- and G-scale figures. A Gas Station Diorama Magazine:...

Structures - Benches
...- Benches Ria painted and built these G-scale benches from an Ozark Miniatures...

Structures
... Aug. 26, 2008 G-scale kit, built by Ria. White Water Brewery...

g-scale/one
Model Railroading Scales
...compromise. 1:32 G-scale/One Gauge Uses G-scale...

g-series
General Rolling Stock - Coal Load
...a coal load (actually it is a G-series car, so it is considered a gondola...

g-shaped
Railroading Books - Great Model Railroads 2000
...of this HO-scale layout is switching. The G-shaped layout includes heavy switching in one town,...

Magazine Articles By Bruce Leckie
... Layouts Scale: HO Description: G-shaped layout with small storage tracks behind the...

Magazine Articles By Mark Olstyn
...inner-city modern switching operations. It is a G-shaped design with a swing gate bridge.

Magazine Articles By Category: Layout Design
...inner-city modern switching operations. It is a G-shaped design with a swing gate bridge.

Magazine Articles By Category: Layouts
...Bruce Leckie Scale: HO Description: G-shaped layout with small storage tracks behind the...

Model Railroader 2010-12 Articles
...inner-city modern switching operations. It is a G-shaped design with a swing gate bridge. Update...

Railroad Model Craftsman 2002-11 Articles
... Layouts Scale: HO Description: G-shaped layout with small storage tracks behind the...

Magazine Articles for HO Scale
...inner-city modern switching operations. It is a G-shaped design with a swing gate bridge. Using...

...Leckie Category: Layouts Description: G-shaped layout with small storage tracks behind the...

g.j.
Magazine Articles By Author
...articles Frederick Monsimer - 1 articles G.J. Michels, Jr. - 2 articles G.R....

Magazine Articles By G.J. Michels, Jr.
My Library - Magazine Articles By G.J. Michels, Jr. My Library - Magazine Articles...

...Jr. My Library - Magazine Articles By G.J. Michels, Jr....

Magazine Articles By Category: Cabooses
...1991-05 Page: 76 Author: G.J. Michels, Jr. Scale: HO Description:...

Magazine Articles By Category: Freight Cars - Refrigerator Cars
...1996-04 Page: 48 Author: G.J. Michels, Jr. Scale: HO Description:...

Railroad Model Craftsman 1991-05 Articles
...Caboose Page: 76 Author: G.J. Michels, Jr. Category: Cabooses Scale:...

Railroad Model Craftsman 1996-04 Articles
...Elephants Page: 48 Author: G.J. Michels, Jr. Category: Freight Cars...

Magazine Articles for HO Scale
...1996-04 Page: 48 Author: G.J. Michels, Jr. Category: Freight Cars...

...1991-05 Page: 76 Author: G.J. Michels, Jr. Category: Cabooses Description:...

g.r.
Magazine Articles By Author
...G.J. Michels, Jr. - 2 articles G.R. Stillwell, Jr. - 1 articles Garrett...

Magazine Articles By G.R. Stillwell, Jr.
My Library - Magazine Articles By G.R. Stillwell, Jr. My Library - Magazine Articles...

...Jr. My Library - Magazine Articles By G.R. Stillwell, Jr....

Magazine Articles By Category: Electronics
...1991-09 Page: 62 Author: G.R. Stillwell, Jr. Description: The author describes...

Railroad Model Craftsman 1991-09 Articles
...Circuit Page: 62 Author: G.R. Stillwell, Jr. Category: Electronics Description:...

g1
Railroading Books - Steam Locomotives Cyclopedia Volume 1
...Class D 121 GN 4-8-0 Class G1 124 SLSW 4-4-2 Class E1 125...

g11
The PRR Chartiers Branch - Progress Report - 2013-06 Report
...Using a small digital camera (a Canon G11) that has a swivel screen makes it...

About pmrr.org
...the content of this web site: Canon G11 - digital camera (also does SD...

g22
Magazine Articles By Elden Gatwood
...HO Description: This installment covers the G22 class (including various sub-classes) of these 46-foot...

Magazine Articles By Garrett Rea
...modeled the steel slabs in a Westerfield G22 gondola.

Magazine Articles By Category: Freight Cars - Gondolas
...modeled the steel slabs in a Westerfield G22 gondola. Denver & Rio Grande Western's Narrow-gauge...

...HO Description: This installment covers the G22 class (including various sub-classes) of these 46-foot...

The Keystone Modeler 06 January 2004 Articles
...modeled the steel slabs in a Westerfield G22 gondola. Modeling the Class T1 Duplex 4-4-4-4...

...HO Description: This installment covers the G22 class (including various sub-classes) of these 46-foot...

Magazine Articles for HO Scale
...modeled the steel slabs in a Westerfield G22 gondola. Creech Brothers Logging Company Magazine:...

...Gondolas Description: This installment covers the G22 class (including various sub-classes) of these 46-foot...

g24
General Rolling Stock - Containers
...are shown here (unfinished) in a PRR G24 gondola. These containers look like the ones...

Equipment - PRR G24 Gondola
Peter's Model Railroading - Equipment - PRR G24 Gondola PRR G24 Gondola Prototype Information...

...- Equipment - PRR G24 Gondola PRR G24 Gondola Prototype Information 07/12/2010...

Equipment - PRR G24 Gondola - Prototype Information
Peter's Model Railroading - Equipment - PRR G24 Gondola - Prototype Information PRR G24 Gondola...

...PRR G24 Gondola - Prototype Information PRR G24 Gondola - Prototype Information...

Equipment - PRR G24 Gondola - Model Information
Peter's Model Railroading - Equipment - PRR G24 Gondola - Model Information PRR G24 Gondola...

...PRR G24 Gondola - Model Information PRR G24 Gondola - Model Information...

Equipment - PRR G24 Gondola - Coupler Conversion
Peter's Model Railroading - Equipment - PRR G24 Gondola - Coupler Conversion PRR G24 Gondola...

...PRR G24 Gondola - Coupler Conversion PRR G24 Gondola - Coupler Conversion...

Equipment - PRR G24 Gondola - References
Peter's Model Railroading - Equipment - PRR G24 Gondola - References PRR G24 Gondola -...

...- PRR G24 Gondola - References PRR G24 Gondola - References...

... 07/12/2010 PRR Class G24 gondolas information PRR Class...

...gondolas information PRR Class G24 gondolas diagrams The Keystone...

Equipment
...Car February 24, 2014 PRR G24 Gondola July 14, 2010 PRR...

Magazine Articles By Elden Gatwood
...HO Description: This installment covers the G24 class, which includes prototype photos and drawings...

Magazine Articles By Category: Freight Cars - Gondolas
...HO Description: This installment covers the G24 class, which includes prototype photos and drawings...

The Keystone Modeler 07 February 2004 Articles
...HO Description: This installment covers the G24 class, which includes prototype photos and drawings...

Magazine Articles for HO Scale
...Gondolas Description: This installment covers the G24 class, which includes prototype photos and drawings...

Sitemap by Page Titles
...References September 12, 2013 PRR G24 Gondola March 06, 2013 -...

Sitemap by Last-modified Date
...Units March 06, 2013 - PRR G24 Gondola - PRR N5c Cabin Car...

...Base July 14, 2010 - PRR G24 Gondola - Model Information July 13, 2010...

...Information July 13, 2010 - PRR G24 Gondola - Coupler Conversion July 12, 2010...

...Conversion July 12, 2010 - PRR G24 Gondola - Prototype Information - PRR...

...Gondola - Prototype Information - PRR G24 Gondola - References July 04, 2010 -...

g26
Magazine Articles By Bob Losse Jr.
... 07/05/2014 Eastern Seaboard Models N-Scale PRR G26 Mill Gondola Magazine: The Keystone...

Magazine Articles By Category: Freight Cars - Gondolas
...Models trucks. Eastern Seaboard Models N-Scale PRR G26 Mill Gondola Magazine: The Keystone...

The Keystone Modeler 72 Winter 2010 Articles
... 07/05/2014 Eastern Seaboard Models N-Scale PRR G26 Mill Gondola Page: 5 Author:...

Magazine Articles for N Scale
...large structure. Eastern Seaboard Models N-Scale PRR G26 Mill Gondola Magazine: The Keystone...

g28
Magazine Articles By Jack Consoli
...a model in HO-scale of the PRR's G28. Tangent Scale Models G31B Gondola Magazine:...

Magazine Articles By Category: Freight Cars - Gondolas
...a model in HO-scale of the PRR's G28. Norfolk & Western Coal Battleship Gondolas Magazine:...

The Keystone Modeler 53 December 2007 Articles
...a model in HO-scale of the PRR's G28. Wawa Tower in S-Scale Page: 27...

Magazine Articles for HO Scale
...a model in HO-scale of the PRR's G28. Modeling the Piggyback Cars of the Delaware,...

g2sa
Railroading Books - Steam Locomotives Cyclopedia Volume 1
...Class P7 160 RDG 4-6-2 Class G2sa 163 B&M 4-6-2 Class P4 166...

g31
Magazine Articles By Jack Consoli
...The article includes the history of the G31 class and subclasses, and prototype photos. The...

Magazine Articles By Category: Freight Cars - Gondolas
...The article includes the history of the G31 class and subclasses, and prototype photos. The...

The Keystone Modeler 72 Winter 2010 Articles
...The article includes the history of the G31 class and subclasses, and prototype photos. Balanced...

Magazine Articles for HO Scale
...The article includes the history of the G31 class and subclasses, and prototype photos. Tank...

g31b
Magazine Articles By Jack Consoli
...of the PRR's G28. Tangent Scale Models G31B Gondola Magazine: The Keystone Modeler...

Magazine Articles By Kurt Kruse
...The author converted a Tangent Scale Models G31b into an "L" subclass model.

Magazine Articles By Category: Freight Cars - Gondolas
...The author converted a Tangent Scale Models G31b into an "L" subclass model. Kitbashing Central...

...by several construction photos. Tangent Scale Models G31B Gondola Magazine: The Keystone Modeler...

The Keystone Modeler 72 Winter 2010 Articles
...history and prototype photos. Tangent Scale Models G31B Gondola Page: 10 Author:...

The Keystone Modeler 73 Spring 2010 Articles
...The author converted a Tangent Scale Models G31b into an "L" subclass model. Converting a...

Magazine Articles for HO Scale
...The author converted a Tangent Scale Models G31b into an "L" subclass model. HO Steam...

...Alco Models brass model. Tangent Scale Models G31B Gondola Magazine: The Keystone Modeler...

g31l
Magazine Articles By Kurt Kruse
... 07/05/2014 HO scale PRR G31L #372165 Magazine: The Keystone Modeler...

Magazine Articles By Category: Freight Cars - Gondolas
...steel, tanks, and scrap. HO scale PRR G31L #372165 Magazine: The Keystone Modeler...

The Keystone Modeler 73 Spring 2010 Articles
... 07/05/2014 HO scale PRR G31L #372165 Page: 6 Author:...

Magazine Articles for HO Scale
...2000 issue page 14. HO scale PRR G31L #372165 Magazine: The Keystone Modeler...

g33
Magazine Articles By Douglas Nelson
...steel product car loads in a PRR G33 65-foot gondola. Model Photography with Helicon Focus...

Magazine Articles By Category: Freight Car Loads
...steel product car loads in a PRR G33 65-foot gondola. Loads for "S" Scale Open...

N Scale Railroading 2005-11/12 Articles
...steel product car loads in a PRR G33 65-foot gondola.

g5
Research - PRR Steam Locomotives
... 4-6-0 "Ten Wheeler" (PRR had 90 G5) "H" 2-8-0 "Consolidation" (represented half...

Chartiers Branch - General Information
...on the Branch 4-6-0 G5 "Ten Wheeler" commuter runs yes...

Railroading Books - Steam Locomotives Cyclopedia Volume 1
...D8 118 PRR and LI 4-6-0 G5 120 Harriman 4-6-0 121 C&NW...

ga
Magazine Articles By Steve Funney
... 07/05/2014 A Kitbashed Santa Fe Class GA 131 Covered Hopper Magazine: Railroad...

Magazine Articles By Category: Freight Cars - Hoppers
... 07/05/2014 A Kitbashed Santa Fe Class GA 131 Covered Hopper Magazine: Railroad...

Railroad Model Craftsman 2011-02 Articles
...prototype photos. A Kitbashed Santa Fe Class GA 131 Covered Hopper Page: 59 Author:...

Magazine Articles for HO Scale
...model photos. A Kitbashed Santa Fe Class GA 131 Covered Hopper Magazine: Railroad...

gable
Magazine Articles By Robert L. Hundman
...Scale: N Description: Fixing a gable roof mistake and adding many details to...

Magazine Articles By Category: Structures - Depots/Stations/Yards
...Scale: N Description: Fixing a gable roof mistake and adding many details to...

N-Scale 2003-07/08 Articles
...Scale: N Description: Fixing a gable roof mistake and adding many details to...

Magazine Articles for N Scale
...Structures - Depots/Stations/Yards Description: Fixing a gable roof mistake and adding many details to...

gadget
The PRR Chartiers Branch - Layout Design
...more like an appliance, not a multi-button gadget. Using these criteria I have decided...

Magazine Articles By David Wiggs
... 07/05/2014 Building a Grade Setting Gadget Magazine: Railroad Model Craftsman 2008-02...

Magazine Articles By Category: Tools
...and rolling stock. Building a Grade Setting Gadget Magazine: Railroad Model Craftsman 2008-02...

Railroad Model Craftsman 2008-02 Articles
...type of structures. Building a Grade Setting Gadget Page: 74 Author: David...

gage
Hand-building Crossings - Building a Crossing
...used the 12-inch ruler and the track gage to determine where the left rail of...

...Then using the ruler and the track gage, I could position the rail such that...

...to use the ruler and the track gage to make sure it remained at the...

Hand-building Turnouts - Code 55 N-scale Turnout
...the straight track (must use the NMRA gage here, of course - you can buy...

...tie to the rail. Use the NMRA gage to space the rail the correct distance...

...use the "points" marks of the NMRA gage as my guide. Next I use a...

...with a test car. Run the NMRA gage through all the track and make any...

...it is too tight. Simply hold the gage in place over the track, heat the...

...track, heat the solder, and let the gage take the tension out. The photo below...

Hand-building Turnouts - Code 83 S-scale Turnout
...position. This time I use the track gage to make sure the rail is the...

...frog needs to be at the track gage distance from both of the stock rails....

...awl is then checked using the track gage to make sure that point is the...

...this rail. Next, I used another rail gage to position the other frog rail. This...

...but not yet done. Using the track gage I verified both sides of the frog...

...do some tweaking here, especially if the gage of the stock rail is a bit...

The Hobby - Changing Modeling Scales
...portal, some grab irons, a NASG Standard Gage, some Tomar Industries' Hayes wheel stops (I...

Tools - Small Tools
...help uncouple the couplers better. A track gage for your modeling scale is a requirement...

...you model. External Reference: Contour Gage This is...

... This is a 6-inch contour gage by General (part #837). It is great...

Equipment - PRR X26 Box Car - Coupler Conversion
...scale wheels exactly matched the NMRA S-scale gage. Update : I have decided that the...

Canonsburg Steel & Iron Works
...were properly spaced using the S Standards Gage (my first true S-scale purchase). Since the...

gages
Hand-building Crossings - Building a Crossing
...now be installed. I used the rail gages to keep the second rail at the...

...a simple matter of using the track gages to install that rail. Here is a...

Hand-building Turnouts - Code 83 S-scale Turnout
...in place using some weights and track gages. The 12-inch ruler represents the inside of...

...through the turnout. I used two rail gages to properly position this rail. Next, I...

...be installed. I use the three track gages to line up the rail and double-check...

...have been positioned according to the track gages, then all the rails should line up...

gain
N-scale Equipment - Life-Like SW9 - Disassembly
...rear of the engine when re-assembling. To gain access to the screws that hold the...

N-scale Equipment - Rivarossi 2-8-8-2 - DCC Conversion
...by sliding it forward a bit. To gain access to the gears, remove the screw...

Scenery - Conifer Trees
...to make one tree, but as you gain experience, it is usually a lot more...

Custom Track Solutions - Helix
...way. The fourth is left open to gain access to the inside of the helix....

...between the L-girder boards. I need to gain access to a 90-degree, close-quarters drill to...

Equipment - PRR NW2 Switcher - Disassembly
...Swivel the truck left and right to gain access to the screws. This photo shows...

Equipment - PRR NW2 Switcher - S-CAB
...then just swing open the door to gain access to the push button mounted in...

Equipment - PRR RS-1 Road Switcher - Construction: Body Assembly
...box that can be opened, presumably to gain access to the equipment inside. I used...

Equipment - PRR RS-1 Road Switcher - Construction: Adding Details
...easy one first so that as you gain experience, the most difficult one won't be...

Bear Creek & Eastern - Progress Report - 2008-02 Report
...over long distances, but I needed to gain a 2-inch separation in about 4 feet....

P & C Railroad Version 2 - Progress Report - 2000-09 Report
...loop) is loose, so that I can gain access to any equipment in the back....

The PRR Chartiers Branch - Layout Design
...cabinets have a door in them to gain access to the shelves inside. These are...

The PRR Chartiers Branch - Progress Report - 2011-09 Report
...bi-fold doors have to be removed to gain enough access space. It is therefore not...

The PRR Chartiers Branch - Progress Report - 2008-10 Report
...will have to be "dug up" to gain access to these screws. I also need...

Magazine Articles By Bob Walker
...high in the hobby, but also to gain a different perspective and learn some new...

Magazine Articles By John Socha-Leialoha
...an invisible helix to make the track gain elevation at the end of the peninsula....

Magazine Articles By Mike Polsgrove
...Digitrax TF4 decoder in a caboose to gain a flashing amber roof-top beacon and red...

Magazine Articles By Category: DCC
...Digitrax TF4 decoder in a caboose to gain a flashing amber roof-top beacon and red...

Magazine Articles By Category: Layout Construction
...an invisible helix to make the track gain elevation at the end of the peninsula....

Magazine Articles By Category: Structures
...high in the hobby, but also to gain a different perspective and learn some new...

Model Railroader 2006-03 Articles
...Digitrax TF4 decoder in a caboose to gain a flashing amber roof-top beacon and red...

N Scale Railroading 2005-09/10 Articles
...an invisible helix to make the track gain elevation at the end of the peninsula....

Railroad Model Craftsman 2005-09 Articles
...high in the hobby, but also to gain a different perspective and learn some new...

Magazine Articles for HO Scale
...Digitrax TF4 decoder in a caboose to gain a flashing amber roof-top beacon and red...

Magazine Articles for N Scale
...an invisible helix to make the track gain elevation at the end of the peninsula....

About pmrr.org
...Even a vegetarian diet can make you gain weight, if you are not careful. So...

gained
Equipment - PRR FM Flat Car - Construction: Conclusion
...it does to do one. As I gained experience doing a certain step on the...

P & C Railroad Version 3 - Progress Report - 2001-08 Report
...then installing the track. Meanwhile, the mountain gained some rock outcroppings from castings I had...

The PRR Chartiers Branch - Progress Report - 2014-02 Report
...year and a half ago, I have gained some more experience, and I firmly believe...

About pmrr.org
...in 2003. By August 2012 I had gained about 35 pounds back again. Even a...

gaining
N-scale Equipment - Rivarossi 2-8-8-2 - DCC Conversion
...around in the dark (also known as "gaining experience"). The locomotive and the tender are...

Equipment - PRR NW2 Switcher - Motor Replacement
... Disassembly article I wrote for gaining access to the motor. Once the boards...

gairo
Magazine Articles By Author
...G. Lambert - 1 articles David Gairo - 1 articles David Heine...

Magazine Articles By David Gairo
My Library - Magazine Articles By David Gairo My Library - Magazine Articles By David...

...My Library - Magazine Articles By David Gairo 07/05/2014 DCC...

Magazine Articles By Category: DCC
...Page: 51 Author: David Gairo Scale: O Description: Installing a...

O Scale Trains Magazine 33 July 2007 Articles
...Page: 51 Author: David Gairo Category: DCC Scale: O...

Magazine Articles for O Scale
...Page: 51 Author: David Gairo Category: DCC Description: Installing...

galilee
Magazine Articles By Paul Ballot
... 07/05/2014 The HO Scale Galilee & Golan Heights RR Magazine:...

Magazine Articles By Category: Layouts
...the photos are amazing. The HO Scale Galilee & Golan Heights RR Magazine:...

Model Railroader 1990-01 Articles
...Power Products' body shell. The HO Scale Galilee & Golan Heights RR Page: 148...

Magazine Articles for HO Scale
...photos and a trackplan. The HO Scale Galilee & Golan Heights RR Magazine:...

galleries
Structures
...Scratch-built bridge, partially completed. (N-scale) Structure Photo Galleries Post Office...

gallery
gallon
S-scale Vehicles - 1948 Mack Pumper
...The 1948 Mack Pumper had a 500 gallon tank and could pump 750 gallons per...

Equipment - SHPX Tank Car - Prototype Information
... 10/14/2011 This is a 10,000 gallon, single-dome tank car. The "X" in the...

The PRR Chartiers Branch - Progress Report - 2011-11 Report
...day I mixed about a half a gallon of Envirotex Lite and poured it on...

Magazine Articles By Scott Seekins
...weathering to an SW9 diesel switcher. 8,000 Gallon Tank Car Magazine: N-Scale 1999-09/10...

Magazine Articles By Tim Frederick
...Tank Cars Description: The Trinity 17,600 gallon, 100-ton corn syrup design.

Magazine Articles By Category: Freight Cars - Tank Cars
... 07/05/2014 8,000 Gallon Tank Car Magazine: N-Scale 1999-09/10...

...brake rigging diagram are also included. An 8000-gallon Tank Car in HO Scale Magazine:...

...author describes how he built set of 4,000-gallon tank cars. This first installment describes how...

...Tim Frederick Description: The Trinity 17,600 gallon, 100-ton corn syrup design. Detailing a Walthers...

Model Railroading 2005-02 Articles
...Tank Cars Description: The Trinity 17,600 gallon, 100-ton corn syrup design. Revisiting The Cooncreek...

N-Scale 1999-09/10 Articles
...own using Woodland Scenics fine ballast. 8,000 Gallon Tank Car Page: 29 Author:...

Magazine Articles for N Scale
...photos of the cosmetic changes made. 8,000 Gallon Tank Car Magazine: N-Scale 1999-09/10...

gallons
S-scale Vehicles - 1948 Mack Pumper
...500 gallon tank and could pump 750 gallons per minute. I purchased this beautiful...

galloping
Railroading Books - The History of North American Rail
...the steam locomotives, diesel locomotives, railcars, Doodlebugs, Galloping Goose, rotary plows, and electric locomotives. Most...

galvanized
Magazine Articles By Andy Sperandeo
...for building your own spray booth from galvanized steel, with construction photos, including ductwork and...

Magazine Articles By Category: Tools
...for building your own spray booth from galvanized steel, with construction photos, including ductwork and...

Model Railroader 1988-01 Articles
...for building your own spray booth from galvanized steel, with construction photos, including ductwork and...

galveston
Equipment - PRR X26 Box Car - Prototype Information
...outside braced box car stored at the Galveston Railroad Museum in Galveston, TX. Why am...

...stored at the Galveston Railroad Museum in Galveston, TX. Why am I including this (and...

My Library - Photo Albums - Baggage Carts
...are of ones I found at the Galveston Railroad Museum on October 6, 2012. This...

My Library - Photo Albums - Brakes
...a set of photos taken at the Galveston Railroad Museum on October 6, 2012 and...

My Library - Photo Albums - Cabooses
...Southern caboose #X518606. External Reference: Galveston RR Museum Inventory On October 6, 2013...

...Worth & Denver caboose #107 at the Galveston Railroad Museum. According to the museum's web...

...Chicago Burlington & Quincy Railroad caboose. The Galveston museum also has this Southern Pacific caboose....

...in the next photo. Also at the Galveston museum is this Missouri Pacific caboose #12131....

My Library - Photo Albums - Passenger Cars
...a good number of photos at the Galveston Railroad Museum on October 9, 2013, because...

...George H. Gould car. The "City of Galveston" car. A Southern dining car, with a...

gamble
The Hobby - Changing Modeling Scales
...pain. Not only do you take a gamble on the cost of shipping, you also...

Magazine Articles By Author
...Todd Brown - 1 articles Todd Gamble - 1 articles Todd McGee...

Magazine Articles By Todd Gamble
My Library - Magazine Articles By Todd Gamble My Library - Magazine Articles By Todd...

...My Library - Magazine Articles By Todd Gamble 07/05/2014 Evergreens...

Magazine Articles By Category: Scenery - Trees, Shrubs, Bushes
...Page: 36 Author: Todd Gamble Description: Using cedar shims and furnace...

N-Scale 1999-03/04 Articles
...Page: 36 Author: Todd Gamble Category: Scenery - Trees, Shrubs,...

game
Magazine Articles By Kevin Strong
...that goes into the tender. The Numbers Game Magazine: Garden Railways 2009-04 Page:...

Magazine Articles By Category: Locomotives - Steam
...some construction photos are included. The Numbers Game Magazine: Garden Railways 2009-04 Page:...

Garden Railways 2009-04 Articles
... 07/05/2014 The Numbers Game Page: 18 Author: Kevin...

games
Magazine Articles By Carl Arendt
...photos. There is a side bar called "Games People Play" that covers some other small...

Magazine Articles By Category: Layout Construction
...photos. There is a side bar called "Games People Play" that covers some other small...

Scale Rails 2005-11 Articles
...photos. There is a side bar called "Games People Play" that covers some other small...

Magazine Articles for G Scale
...photos. There is a side bar called "Games People Play" that covers some other small...

gaming
Equipment - PRR H21a Hopper - Construction: Frame
...Lead shot can be had at any gaming or hunting store. A 25lb bag will...

gammi
Magazine Articles By Charles C. Jensen
... 07/05/2014 Sleeper-Lounge-Buffet-Observation Kitchi Gammi Club Magazine: The Keystone Vol...

Magazine Articles By Category: Passenger Cars
...Milwaukee Road Lake Pepin car. Sleeper-Lounge-Buffet-Observation Kitchi Gammi Club Magazine: The Keystone Vol...

The Keystone Vol 47 No.2 Articles
...photo of PRR T1 #5505. Sleeper-Lounge-Buffet-Observation Kitchi Gammi Club Page: 46 Authors:...

gang
Magazine Articles By Dr. Nicholas S. Muff
... 07/05/2014 Dalton Gang Homestead Magazine: N-Scale 2006-07/08 Page:...

Magazine Articles By Category: Structures - Homes
...tower kit (significantly kitbashed, of course). Dalton Gang Homestead Magazine: N-Scale 2006-07/08 Page:...

N-Scale 2006-07/08 Articles
... 07/05/2014 Dalton Gang Homestead Page: 22 Author:...

gangwish
Magazine Articles By Author
...F. Fischer - 1 articles Robert Gangwish - 1 articles Robert Hesselgrave...

Magazine Articles By Robert Gangwish
My Library - Magazine Articles By Robert Gangwish My Library - Magazine Articles By Robert...

...My Library - Magazine Articles By Robert Gangwish 07/05/2014 Seaboard...

Magazine Articles By Category: Structures - Depots/Stations/Yards
...Page: 32 Author: Robert Gangwish Description: This structure now houses the...

Scale Rails 2005-11 Articles
...Page: 32 Author: Robert Gangwish Category: Structures - Depots/Stations/Yards Description:...

gantry
Magazine Articles By C.R. Yungkurth
... 07/05/2014 Erie RR Gantry Crane Magazine: Model Railroader 1985-10...

Magazine Articles By Category: Structures - Track-side Details
...how to build scale stairs. Erie RR Gantry Crane Magazine: Model Railroader 1985-10...

Model Railroader 1985-10 Articles
...model photo; no prototype photos. Erie RR Gantry Crane Page: 76 Author:...

gap
DCC - Tsunami Decoder Programming
...the engine could creep over the insulating gap causing problems. To program the decoder...

Hand-building Crossings - Building a Crossing
...the point in place. I cut the gap using the Dremel tool with a cut-off...

...0.030" or 0.040" thick styrene in the gap (depending on which one fit) and applied...

...the rail. After I cut an insulating gap into the other leg of the point,...

Hand-laying Track - 5. Laying Rail
...it on the rail so that the gap between this rail and the previous one...

...I leave a little bit of a gap for possible expansion. Sometimes I have to...

Hand-laying Track - 7. My Checklist
...rail on tie plates. Allow a slight gap between the rails for possible expansion....

Hand-building Turnouts - Code 40 N-scale Turnout
...of time to cure, I cut a gap in the rail for the point rails...

...there is no need to cut a gap in the throwbar, and the throwbar (at...

Hand-building Turnouts - Code 83 S-scale Turnout
...movement in the rails to where the gap is compromised, I superglue a piece of...

...piece of 0.020" thick styrene in the gap. These will be trimmed to the shape...

...(which is powered) doesn't extend past the gap cut in the frog rail, or otherwise...

...I paint the tops of the styrene gap filler pieces with either Polly Scale "Aluminum"...

Hand-building Turnouts - My Turnout Construction Checklist
...with a cutoff disc to cut a gap in the rails between the frog point...

...styrene shims and superglue them in the gap. Trim the styrene shims once...

...the frog wire. Cut a gap in the the point rails just away...

...new lengths of rail, and the styrene gap shims.

N-scale Equipment - Kato E8 - Headlight Replacement
...in the same orientation. Look for the gap. Removing the old LED is quite simple....

N-scale Equipment - Life-Like SW9 - Improving Pickup
...the center of the walkway has a gap into which the shell snaps in place....

N-scale Equipment - Model Power 4-6-2 - Coupler Conversion
...of styrene is needed to fill the gap. There is a small indent at the...

S-scale Couplers - Proto Max Couplers
...two cars, they still leave a 3-foot gap between the cars, which is prototypically correct....

S-scale Couplers - Sergent Couplers - Old Design
...hand while applying a drop near the gap between the two body halves near the...

Tools - Clamp Wall Rack
...The solution was to rip a 1/4 gap in the top of the blocks. Each...

Trackwork - Laying Flextrack
...face each other but don't close the gap. This situation is shown in the next...

Woodworking - Layout Cabinets
...by the table saw provides for the gap between the drawer fronts once installed. This...

Equipment - PRR H21a Hopper - Construction: Frame
...from the front panel that matches the gap created by the center spacer and the...

Equipment - B&O M53 Box Car - Construction: Painting
...their vertical, inside edge to make the gap between them larger. However, I had virtually...

Equipment - PRR NW2 Switcher - Sergent Couplers
...piece of styrene to fill the large gap above the coupler and under the curved...

Equipment - PRR RS-1 Road Switcher - Construction: Completion
...5-minute epoxy. Again, there must be no gap between the speaker and the styrene face...

Equipment - PRR X29 Box Car - Kit Construction
...The lead shot doesn't fit through the gap between the sill frame members. However, that...

...was not 100%, so there was a gap in the parts. I cleaned up the...

Bear Creek & Eastern - Progress Report - 2007-01 Report
... 01/22/2007 01/22/2007 There is gap of several months between progress updates, but...

P & C Railroad Version 2 - Progress Report - 2000-08 Report
...sagged a bit and left a noticeable gap in the front. I have installed some...

P & C Railroad Version 3 - Progress Report - 2001-11 Report
...The downspouts are used to hide the gap between the sections, and make them look...

P & C Railroad Version 4 - Progress Report - 2003-10 Report
...got some quarter-round molding to hide the gap between the main molding and the uneven...

The PRR Chartiers Branch - Layout Design
...is needed to mark off where the gap is. The diagram below shows my entire...

The PRR Chartiers Branch - Progress Report - 2010-04 Report
...Here's the finished section. I left a gap in the middle because that's where the...

The PRR Chartiers Branch - Progress Report - 2011-09 Report
...mentioned above, there is about a 7-inch gap on the right hand side. I plan...

The PRR Chartiers Branch - Progress Report - 2013-12 Report
...to prevent anything from falling in the gap, I cut some strips of cardboard and...

Magazine Articles By Jim Hediger
...the decals are made. D&RGW's Wagon Wheel Gap Station Magazine: Model Railroader 1988-03...

...Structures - Depots/Stations/Yards Description: Wagon Wheel Gap in Colorado has a remote branchline station...

Magazine Articles By Joseph & Clayton Barry
... 07/05/2014 Bridging the Gap Magazine: N-Scale 2000-07/08 Page:...

Magazine Articles By Peter B. Bryan
... 07/05/2014 The Comanche & Indian Gap RR Magazine: Model Railroader 1997-07...

Magazine Articles By Robert Nicholson
... 07/05/2014 Closing the Gap: Modifying Coupler Mounts Magazine: 1:64...

Magazine Articles By Sam Powell
... 07/05/2014 Bridging the Gap Magazine: NASG Dispatch 2010-12 Page:...

Magazine Articles By Category: Benchwork
...style 4 x 8 layout. Bridging the Gap Magazine: NASG Dispatch 2010-12 Page:...

Magazine Articles By Category: Garden Railroading
...examples are shown. The Comanche & Indian Gap RR Magazine: Model Railroader 1997-07...

Magazine Articles By Category: Locomotives - Diesel
...close-up photos of the installation. Closing the Gap: Modifying Coupler Mounts Magazine: 1:64...

Magazine Articles By Category: Model Railroads and People
...passed away in July 2000. Bridging the Gap Magazine: N-Scale 2000-07/08 Page:...

Magazine Articles By Category: Structures - Depots/Stations/Yards
...a bill of materials. D&RGW's Wagon Wheel Gap Station Magazine: Model Railroader 1988-03...

... Jim Hediger Description: Wagon Wheel Gap in Colorado has a remote branchline station...

1:64 Modeling Guide 2009 Fall Articles
...methods to building grade crossings. Closing the Gap: Modifying Coupler Mounts Page: 12 Author:...

Model Railroader 1988-03 Articles
...photos, and parts list. D&RGW's Wagon Wheel Gap Station Page: 79 Author:...

...Structures - Depots/Stations/Yards Description: Wagon Wheel Gap in Colorado has a remote branchline station...

Model Railroader 1997-07 Articles
...5' by 12'. The Comanche & Indian Gap RR Page: 75 Author:...

N-Scale 2000-07/08 Articles
...only show the finished product. Bridging the Gap Page: 30 Author: Joseph...

NASG Dispatch 2010-12 Articles
...Loizeaux about the 2011 convention. Bridging the Gap Page: 12 Author: Sam...

Magazine Articles for Large Scale Scale
...and close-up photos. The Comanche & Indian Gap RR Magazine: Model Railroader 1997-07...

Magazine Articles for S Scale
...seen on the web . Closing the Gap: Modifying Coupler Mounts Magazine: 1:64...

Background Building #1
...make sure no light gets through the gap. I used left over pieces of plastic...

...the glue with which I filled the gap between the building and the foundation with...

...paint, because I could see through the gap, if there was any light behind it....

Canonsburg Milling
...the way, will hide the rather large gap between the building's concrete foundation and the...

Deck Plate Girder Bridge - Deck Plate Girder Bridge
...of this same bridge for the other gap in my layout. Although the prototype used...

Furniture Factory - Diorama
...at an angle, to cover the 15-foot gap between the fences. The factory is now...

Raiser Sharp Barber Shop
...I'll have to deal with hiding the gap later on. And this is what it...

Smitty's Rod-n-Reel
...above the front door shines through the gap between the porch roof and the wall....

Trestle Extension
...installing a small "table" that bridges the gap between the module on the left and...

Scratch-built Turntable - Base
...while the glue dries. I left a gap between the two rail halves to prevent...

gaps
Electronics Projects - Helix Elevator Lights
...angle to the track so that the gaps in between rolling stock don't cause the...

Hand-building Crossings - Building a Crossing
...visible tie plates, spikes, sides of styrene gaps, and the tops of the guard rails....

...just touch the tops of the styrene gaps with Polly Scale Flat Aluminum paint, which...

...to look, you cannot find the styrene gaps in this close-up photo. This completes this...

Hand-laying Track - 5. Laying Rail
...stagger rail joints so that no two gaps are right next to each other. These...

Hand-laying Track - 7. My Checklist
...Dries in 30 minutes. Fill gaps between ceiling tiles with Vinyl Spackling....

Hand-building Turnouts - Code 83 S-scale Turnout
...is done, I need to cut the gaps to electrically insulate it from the rest...

...installed the styrene filler pieces in the gaps I cut in the point rails using...

Scenery - Abutments Casts
...filed the master smooth and filled some gaps created by minor mistakes while cutting. Finally,...

Scenery - Scenery Base
...My objective is just to cover the gaps leftover from the cardboard webbing. To use...

Scenery - Thin Castings
...was in the process of filling the gaps between the rocks with ground foam, as...

Equipment - PRR H21a Hopper - Construction: Frame
...forgot to do was make some rectangular gaps in the top of the sill to...

...will take the truck bolsters. These 16" gaps were placed 50" from each end. The...

...wide). These were then glued in the gaps, precisely centered and flush with the top...

...fit. Because I forgot to cut some gaps in the center sill (mentioned near the...

Equipment - PRR H21a Hopper - Construction: Bay Doors
...to get each one to fit. Some gaps are visible. I will see about hiding...

Equipment - PRR H21a Hopper - Construction: Interior
...which I can duplicate to hide the gaps that are visible from above. Something to...

Equipment - PRR RS-1 Road Switcher - Construction: Body Assembly
...came back and filled in the larger gaps with 5-minute epoxy. Later, when the body...

...Later, when the body is painted, the gaps shouldn't be visible. The engineer's side (right-hand...

Bear Creek & Eastern - Progress Report - 2006-07 Report
...surfaces with some basic ground foam. The gaps between the castings were filled with green...

P & C Railroad Version 3 - Progress Report - 2001-12 Report
...Masonite hardboard. That way there are no gaps or screw holes to content with. The...

P & C Railroad Version 3 - Progress Report - 2002-08 Report
...each piece back to the benchwork. All gaps will be filled with plaster cloth and...

P & C Railroad Version 3 - Progress Report - 2002-09 Report
...up into smaller pieces now has the gaps filled in. In the back I added...

P & C Railroad Version 4 - Progress Report - 2003-03 Report
...bedroom. Joint compound now covers the drywall gaps and screw heads. This shows the view...

P & C Railroad Version 4 - Progress Report - 2003-07 Report
...the ones by the window, there are gaps between the sheets. This is unavoidable considering...

...aren't straight and square. I filled any gaps between the panels with joint compound, and...

The PRR Chartiers Branch - Layout Design
...Modules are tightly coupled together to minimize gaps between modules. Back drop and lighting...

The PRR Chartiers Branch - Progress Report - 2010-11 Report
... 11/09/2010 11/09/2010 Some small gaps between the tracks are being filled with...

The PRR Chartiers Branch - Progress Report - 2014-01 Report
...the previous scenery base, there were large gaps. I mixed up some Sculptamold, and applied...

Railroading Books - Bridge and Trestle Handbook
...for openings, conserve ground space, to span gaps, to handle locomotives and cars (turntables and...

Railroading Books - Trackwork and Lineside Detail
...laying the rail, dealing with rail joint gaps, attaching power feeders, and ballasting. 6...

Magazine Articles By Bob Winterton
... 07/05/2014 Bridging the Gaps in the Superior Northern Magazine:...

Magazine Articles By Brian Scace
...circuits for the layout room), filling rail gaps with something/anything, reverse curves (s-curves), and hidden...

Magazine Articles By Philip V. Chiavetta, Frank DeBonis
...to make dirt to fill in the gaps around removable dioramas.

Magazine Articles By Category: Layout Construction
...circuits for the layout room), filling rail gaps with something/anything, reverse curves (s-curves), and hidden...

Magazine Articles By Category: Structures - Bridges
...drawings, and close-up construction photos. Bridging the Gaps in the Superior Northern Magazine:...

Magazine Articles By Category: Structures - Towns/Cities
...to make dirt to fill in the gaps around removable dioramas. Urban Scenery Magazine:...

O Scale Trains Magazine 33 July 2007 Articles
...circuits for the layout room), filling rail gaps with something/anything, reverse curves (s-curves), and hidden...

Railroad Model Craftsman 1991-03 Articles
...scale drawings and model photos. Bridging the Gaps in the Superior Northern Page: 88...

Railroad Model Craftsman 1991-10 Articles
...to make dirt to fill in the gaps around removable dioramas. Modeling CNJ F3's Page:...

Magazine Articles for HO Scale
...describes how he models them. Bridging the Gaps in the Superior Northern Magazine:...

Background Building #1
...for strength, and also to fill any gaps there might be between the roof and...

Canonsburg Steel & Iron Works
...something like this. I then used the gaps in the top piece to cut the...

...in the top piece to cut the gaps for the rail in the bottom piece...

...some spackling compound to fill in the gaps left by the U-shaped channel pieces at...

Lumber Storage Shed
...look nice and aligned, but left some gaps here and there. After I carefully stained...

Structures - White Water Brewery
...exterior of the structure, I filled the gaps with spackle. When painted the same color...

garage
Electronics Projects - Flickering Lights
...headphone plug. You can find these in garage sales, bargain bins, or on electronics surplus...

Hand-building Turnouts - Code 83 S-scale Turnout
...recently "discovered" my little bench-grinder in the garage. It makes very quick work of grinding....

Painting - Airbrush Setup
...supplies needed. I currently airbrush in the garage and spray into a large cardboard box....

...bring the entire drawer out to the garage than to carry each of the tools...

...the Optivisors to see up close. The garage has similar lighting to what I use...

...room, so what I see in the garage is pretty close to what I see...

Scenery - Boats
...two small N-scale lobster boats to the garage and used my drill press to mill...

Scenery - Streets
...however, have "Ready-Mixed Concrete Patch" in the garage, because I had just recently finished remodeling...

...I had just recently finished remodeling the garage where I used this material to patch...

...this material to patch holes in the garage's floor before painting it. I decided to...

The Hobby - Changing Modeling Scales
...a nice large layout in a two-car garage. Even though it was hot outside, we...

Tools - Angled Panel Cutting Jig
...left-over pieces of wood found in the garage. It consists of a full-length 2x4 stud...

Tools - Router Table
...some dedicated time to complete in my garage. This is as far as I have...

Tools - Table Saw
...matching mobile base. We have a typical garage wherein the table saw will reside, so...

...those parts that were uncrated into the garage. This is not an easy project, and...

Woodworking
...02/07/2012 Building a workbench in the garage. Layout Cabinets 08/19/2012 Building...

...I built a work bench for my garage.

Woodworking - Foldable Workbench
...I like having a workbench in the garage for those bigger or dirtier jobs that...

...be done in the house. However, the garage is shared with tools, shelves, and a...

...decided to build another one for the garage. Only this one would be larger and...

...one would be larger and heftier. The garage floor has a slope to it, so...

...workbench at the end wall of the garage. That way when the table is down,...

...the top-of-the-workbench height. I just remodeled the garage and wanted to have a "splash board"...

...the same paint used to paint the garage walls. With that done, I started building...

Equipment - PRR FM Flat Car - Construction: Decals
...Next, I took the car to the garage and applied a light coat of the...

Equipment - PRR RS-1 Road Switcher - Construction: Interior
...day I took the body to the garage and airbrushed Floquil "Primer" to the interior...

Bear Creek & Eastern - Progress Report - 2006-08 Report
...Atlas' flextrack). I then went to the garage and cut two strips of pine (3/4"...

Crystal Creek Module - Progress Report - 2005-01 Report
...what I had left over in the garage). The photo below shows the parts that...

P & C Railroad Version 4 - Progress Report - 2004-02 Report
...that I happen to have in the garage). The color choice makes it easy to...

P & C Railroad Version 4 - Progress Report - 2003-04 Report
...an epoxy-based paint typically used for painting garage floors. I chose the tan color because...

The PRR Chartiers Branch - Progress Report - 2009-12 Report
...last-minute changes when I went to the garage to actually start building the panel and...

The PRR Chartiers Branch - Progress Report - 2011-05 Report
...veil, I took the board to the garage and used a cheap spray paint of...

The PRR Chartiers Branch - Progress Report - 2012-11 Report
...Crack Filler" (left over from last year's garage remodel). It is supposed to be self-leveling,...

The PRR Chartiers Branch - Progress Report - 2013-11 Report
...module, I found some cork in the garage and decided to use that to build...

The PRR Chartiers Branch - Progress Report - 2008-07 Report
...part of a Saturday, working in a garage that must have been over a hundred...

Railroading Books - Great Model Railroads 1992
...Bob Dupont's O Scale Empire in a Garage Author: George Hall. Bob's layout occupies 17'...

...layout occupies 17' by 19' in his garage, and stands 5 feet tall. He can...

...He can park his car in the garage too. He models both standard and narrow...

Magazine Articles By Andy Romano
...around three walls of the author's two-car garage. The article describes how he got into...

Magazine Articles By Charles Stevens, Bruce Nall
...modern-day, busy industrial scene built into a garage, while still allowing access to the car.

Magazine Articles By Doug Geiger
...CTC panel and the helix in the garage. The Granite Mountain Railway Part II Magazine:...

Magazine Articles By Elmer Cerny
... 07/05/2014 The Wasco Gas Station, Garage, and Grocery Magazine: Model Railroader...

Magazine Articles By George Sebastian-Coleman
...these in HO. Narrow Gauge in a Garage Part 1 Magazine: Model Railroader...

...of building an O-scale layout in a garage shared with the family car. Layout photos,...

...an On2-1/2 Porter. Narrow Gauge in a Garage Part 2 Magazine: Model Railroader...

...tight constraints and sloping floor of a garage. It also covers backdrop construction, and building...

...the layout rests. Narrow Gauge in a Garage Part 3 Magazine: Model Railroader...

Magazine Articles By Jeff Madden
...designs one could use in a bedroom, garage, or basement. S Track Planning Part VI...

Magazine Articles By Jim Hediger
...15' x 30' layout in Wilson Hunt's garage. The Mark 7 Turnout Control Magazine:...

Magazine Articles By John Grams
...made up entirely of items found in garage sales, rummage bins, and train shows. Half...

Magazine Articles By Mike Garforth
...layout spans two rooms in a small garage in England. Includes a track plan, a...

Magazine Articles By Nicolas Biangel
...York fits in a 22' x 26' garage. Includes model photos, a rough track plan.

Magazine Articles By Robert Bennett
...a general store, a gas station, a garage, a fast-food place, and a post office....

Magazine Articles By Robert Smaus
...Challenges of Building a Layout in a Garage Magazine: Model Railroader 1987-12 Page:...

...encountered when placing your layout in a garage, such as bugs and dust. His weathering...

...standard shade of dust collecting in his garage. The Golden Era Los Angeles in the...

Magazine Articles By Steve Sint
...built the Fos Scale Limited structure. Martin's Garage: Gutting It and Studding It Magazine:...

...revisits Frank Burke and Lynn Austin's two-car garage layout ten years after the first report....

Magazine Articles By Thomas A. Yorke
... 07/05/2014 Jones' Garage Magazine: Railroad Model Craftsman 1996-03...

Magazine Articles By various authors
...which fits along one wall of the garage has become a family project. Earl Johnson's...

Magazine Articles By Whit Towers
...old layout is built into a five-car garage and models the Sierra Nevada mountain range.

Magazine Articles By Category: Layout Construction
...the slot method. Narrow Gauge in a Garage Part 1 Magazine: Model Railroader...

...of building an O-scale layout in a garage shared with the family car. Layout photos,...

...an On2-1/2 Porter. Narrow Gauge in a Garage Part 2 Magazine: Model Railroader...

...tight constraints and sloping floor of a garage. It also covers backdrop construction, and building...

...the layout rests. Narrow Gauge in a Garage Part 3 Magazine: Model Railroader...

...Challenges of Building a Layout in a Garage Magazine: Model Railroader 1987-12 Page:...

...encountered when placing your layout in a garage, such as bugs and dust. His weathering...

...standard shade of dust collecting in his garage. The Christmas Challenge Magazine: Model...

...CTC panel and the helix in the garage. The Great Western Rail & Mining Plc....

Magazine Articles By Category: Layout Design
...designs one could use in a bedroom, garage, or basement. S Track Planning Part VI...

Magazine Articles By Category: Layouts
...old layout is built into a five-car garage and models the Sierra Nevada mountain range....

...made up entirely of items found in garage sales, rummage bins, and train shows. Half...

Magazine Articles By Category: Layouts - G
...layout spans two rooms in a small garage in England. Includes a track plan, a...

Magazine Articles By Category: Layouts - HO - Large
...15' x 30' layout in Wilson Hunt's garage. The Midwest Lines Magazine: Railroad...

...revisits Frank Burke and Lynn Austin's two-car garage layout ten years after the first report....

Magazine Articles By Category: Layouts - HO - Medium
...which fits along one wall of the garage has become a family project. Denis Mueller's...

Magazine Articles By Category: Layouts - N - Medium
...modern-day, busy industrial scene built into a garage, while still allowing access to the car....

Magazine Articles By Category: Layouts - O
...York fits in a 22' x 26' garage. Includes model photos, a rough track plan....

...around three walls of the author's two-car garage. The article describes how he got into...

Magazine Articles By Category: Structures
...a general store, a gas station, a garage, a fast-food place, and a post office....

Magazine Articles By Category: Structures - Automobiles
...Adding details to a gas station. Martin's Garage: Gutting It and Studding It Magazine:...

Magazine Articles By Category: Structures - Towns/Cities
...model photos and several scale drawings. Jones' Garage Magazine: Railroad Model Craftsman 1996-03...

...photo, are included. The Wasco Gas Station, Garage, and Grocery Magazine: Model Railroader...

Garden Railways 2008-08 Articles
...layout spans two rooms in a small garage in England. Includes a track plan, a...

Model Railroader 1978-03 Articles
...Compound 0-6-6-0T engine. The Wasco Gas Station, Garage, and Grocery Page: 66 Author:...

...15' x 30' layout in Wilson Hunt's garage. CPR Standard No.2 Icehouse Page: 73...

Model Railroader 1978-08 Articles
...which fits along one wall of the garage has become a family project. Consider Narrow...

Model Railroader 1983-01 Articles
...old layout is built into a five-car garage and models the Sierra Nevada mountain range....

Model Railroader 1987-12 Articles
...Challenges of Building a Layout in a Garage Page: 52 Author: Robert...

...encountered when placing your layout in a garage, such as bugs and dust. His weathering...

...standard shade of dust collecting in his garage. Introducing the Allegheny Midland Part 1 Page:...

Model Railroader 1990-12 Articles
...made up entirely of items found in garage sales, rummage bins, and train shows. Half...

Model Railroader 2006-07 Articles
...photo, and diagrams. Narrow Gauge in a Garage Part 1 Page: 36 Author:...

...of building an O-scale layout in a garage shared with the family car. Layout photos,...

Model Railroader 2006-08 Articles
...over a decade. Narrow Gauge in a Garage Part 2 Page: 50 Author:...

...tight constraints and sloping floor of a garage. It also covers backdrop construction, and building...

Model Railroader 2006-09 Articles
...tuning commercial turnouts. Narrow Gauge in a Garage Part 3 Page: 52 Author:...

NASG Dispatch 2005-06 Articles
...designs one could use in a bedroom, garage, or basement. Finding That Perfect Track Plan...

O Scale Trains Magazine 03 July 2002 Articles
...York fits in a 22' x 26' garage. Includes model photos, a rough track plan....

O Scale Trains Magazine 33 July 2007 Articles
...around three walls of the author's two-car garage. The article describes how he got into...

Railroad Model Craftsman 1991-06 Articles
...modern-day, busy industrial scene built into a garage, while still allowing access to the car....

Railroad Model Craftsman 1991-07 Articles
...CTC panel and the helix in the garage. Modeling a UP C30-7 Page: 54...

Railroad Model Craftsman 1996-03 Articles
...bushes, water, figures, and other details. Jones' Garage Page: 88 Author: Thomas...

Railroad Model Craftsman 1996-04 Articles
...revisits Frank Burke and Lynn Austin's two-car garage layout ten years after the first report....

Railroad Model Craftsman 2006-01 Articles
...RPO. Includes photos and scale drawings. Martin's Garage: Gutting It and Studding It Page:...

Railroad Model Craftsman 2010-03 Articles
...a general store, a gas station, a garage, a fast-food place, and a post office....

Magazine Articles for G Scale
...layout spans two rooms in a small garage in England. Includes a track plan, a...

Magazine Articles for HO Scale
...old layout is built into a five-car garage and models the Sierra Nevada mountain range....

...which fits along one wall of the garage has become a family project. CN Engine...

...CTC panel and the helix in the garage. The Granite Mountain Railway Part II Magazine:...

...15' x 30' layout in Wilson Hunt's garage. The Lakeside Lines Shops Rebuilds a Locomotive...

...revisits Frank Burke and Lynn Austin's two-car garage layout ten years after the first report....

Magazine Articles for N Scale
...modern-day, busy industrial scene built into a garage, while still allowing access to the car....

Magazine Articles for O Scale
...trunk and applies branches and greenery. Martin's Garage: Gutting It and Studding It Magazine:...

...around three walls of the author's two-car garage. The article describes how he got into...

...made up entirely of items found in garage sales, rummage bins, and train shows. Half...

Magazine Articles for On3 Scale
...has been completed. Narrow Gauge in a Garage Part 1 Magazine: Model Railroader...

...of building an O-scale layout in a garage shared with the family car. Layout photos,...

...an On2-1/2 Porter. Narrow Gauge in a Garage Part 2 Magazine: Model Railroader...

...tight constraints and sloping floor of a garage. It also covers backdrop construction, and building...

...the layout rests. Narrow Gauge in a Garage Part 3 Magazine: Model Railroader...

Magazine Articles for On30 Scale
...York fits in a 22' x 26' garage. Includes model photos, a rough track plan....

...a general store, a gas station, a garage, a fast-food place, and a post office....

Magazine Articles for S Scale
...designs one could use in a bedroom, garage, or basement. S Track Planning Part VII...

Online Digital Videos
...weeks of hard work, in a hot garage (just about a week before their public...

...me to test the modules in my garage. It is using the Digitrax DCC system,...

About pmrr.org
...very involved playing bass guitar in a garage band. I picked up the hobby again...

...time I was more interested in a garage band I was in. When I returned...

...to Houston I got involved in a garage band and we were in need of...

Sitemap by Page Titles
... January 26, 2006 - Otto's Garage January 26, 2006 -...

Sitemap by Last-modified Date
...Dry Goods - Structures - Otto's Garage January 14, 2006 - Structures -...

Deck Plate Girder Bridge - Deck Plate Girder Bridge
...I just spread some newspaper on the garage floor, grabbed a spray can of "flat...

Structures
... N-scale model, finished by Ria. Otto's Garage...

Structures - Otto's Garage
Peter's Model Railroading - Structures - Otto's Garage Structures - Otto's Garage Ria built, painted,...

...Structures - Otto's Garage Structures - Otto's Garage Ria built, painted, and weathered this beautiful...

...weathered this beautiful mini scene of Otto's Garage. It is an HO-scale model set in...

...set in the 1950's. Otto's small, country garage has been here for years. The locals...

Smitty's Rod-n-Reel
...Next, I took the structure to the garage and used Krylon Primer to seal the...

garages
Magazine Articles By Jim Wing, Darren Ferretter
...a large layout in one of their garages. It is a folded dog-bone design with...

Magazine Articles By Category: Layouts - HO - Large
...a large layout in one of their garages. It is a folded dog-bone design with...

Railroad Model Craftsman 2011-09 Articles
...a large layout in one of their garages. It is a folded dog-bone design with...

Magazine Articles for HO Scale
...a large layout in one of their garages. It is a folded dog-bone design with...

garbage
Product Photos - Model Tech Studios
...O-scale as well. S-scale Kit #SD306 "Garbage Pickup Day Piles" S-scale Kit #SD311 "Industry...

garbelotti
Magazine Articles By Author
...E. Bailey - 1 articles Thomas Garbelotti - 1 articles Thomas Griffiths...

Magazine Articles By Thomas Garbelotti
My Library - Magazine Articles By Thomas Garbelotti My Library - Magazine Articles By Thomas...

...My Library - Magazine Articles By Thomas Garbelotti 07/05/2014 Benchwork...

Magazine Articles By Category: Layout Construction
...Page: 100 Author: Thomas Garbelotti Description: Continuation of building a layout...

Model Railroad Hobbyist 2010-11/12 Articles
...Page: 100 Author: Thomas Garbelotti Category: Layout Construction Description:...

garden
Scenery - Telegraph/Telephone Poles
...I settled on three crossarms. As in garden design, odd numbers always look better than...

Railroading Books
...Your Model Railroad Building Structures for Your Garden Railway Canonsburg Creating Micro Layouts Detailing Freight...

Railroading Books - Building Structures for Your Garden Railway
...Railroading Books - Building Structures for Your Garden Railway My Library - Railroading Books -...

...Railroading Books - Building Structures for Your Garden Railway Author : Jack Verducci Publisher :...

Magazine Articles By Bob Brown
...smaller scales. The Tuolomne Country Narrow Gauge Garden Railroad Magazine: Garden Railways 2009-04...

...Narrow Gauge Garden Railroad Magazine: Garden Railways 2009-04 Page: 50 Category:...

...describes the author's 30' x 60' home garden layout set in the 1920-30 period modeling...

Magazine Articles By Bruce Chandler
...Scatchbuilding a Yard Office Magazine: Garden Railways 2009-04 Page: 44 Category:...

Magazine Articles By Burl Rice
...Techniques for Realistic Results Magazine: Garden Railways 2008-08 Page: 70 Category:...

Magazine Articles By Christopher P. D'Amato
... 07/05/2014 Building a Garden Railway Part I Magazine: Railroad...

...1991-06 Page: 48 Category: Garden Railroading Scale: G Description: The...

...the author got started in building a garden railroad. It covers the design of the...

...design of the track plan and the garden (including a list of plants used), and...

...the start of the project. Building a Garden Railway Part II Magazine: Railroad...

...1991-07 Page: 72 Category: Garden Railroading Scale: G Description: In...

...will start the construction phase of his garden railroad. It covers preparing the ground, ballasting,...

...supports, planting plants, and structures. Building a Garden Railway Part III Magazine: Railroad...

...1991-08 Page: 72 Category: Garden Railroading Scale: G Description: The...

...his series on how he built his garden railroad. This installment covers wiring and finishing...

Magazine Articles By Cody Grivno
...locomotives of the year 1994. A Growing Garden Empire Magazine: Model Railroader 2006-08...

...2006-08 Page: 64 Category: Garden Railroading Scale: G Description: The...

...The article features many photos and a garden design plan for this 75' by 80'...

Magazine Articles By David Bodnar
...Long is Your Railway? Magazine: Garden Railways 2005-12 Page: 76 Category:...

...odometer to measure the length of your garden railway. An updated article is available...

Magazine Articles By David Fleetwood
...Building the Ninth Bridge Magazine: Garden Railways 2008-08 Page: 50 Category:...

Magazine Articles By Don Parker
...Plants for Warmer Regions Magazine: Garden Railways 2009-04 Page: 72 Category:...

...2009-04 Page: 72 Category: Garden Railroading Scale: G Description: The...

...author discusses some plants that useful for garden railroading in the southern tier states of...

...Trees for Warmer Climates Magazine: Garden Railways 2008-08 Page: 81 Category:...

...2008-08 Page: 81 Category: Garden Railroading Description: Various plants are discussed...

...Magical Side of Gardening Magazine: Garden Railways 2005-12 Page: 93 Category:...

...2005-12 Page: 93 Category: Garden Railroading Scale: G Description: Ways...

... G Description: Ways to make garden railroading more whimsical and less serious.

Magazine Articles By Doug Mayes
...in a Confined Space Magazine: Garden Railways 2008-08 Page: 54 Category:...

...and how he designed and constructed his garden layout. Includes a track plan, a listing...

Magazine Articles By George Hall
...Western. Includes a track plan. Jack Verducci's Garden Layout Magazine: Model Railroader 2000-04...

...2000-04 Page: 95 Category: Garden Railroading Scale: G Description: This...

Magazine Articles By Graham Duncan-Smith
...Shack for Your Railway Magazine: Garden Railways 2008-08 Page: 46 Category:...

Magazine Articles By Jack Verducci
...07/05/2014 Nightscaping Part 2 Magazine: Garden Railways 2005-12 Page: 90 Category:...

...- Outdoor vs. Indoor Magazine: Garden Railways 2009-04 Page: 68 Category:...

...the elements. Structures: Introduction Magazine: Garden Railways 2008-08 Page: 76 Category:...

...how to build structures for the outdoor garden.

Magazine Articles By Jeff Young
... 07/05/2014 Designing a Garden Railway for Live-steam Locomotives Magazine:...

...Railway for Live-steam Locomotives Magazine: Garden Railways 2005-12 Page: 112 Category:...

...2005-12 Page: 112 Category: Garden Railroading Scale: G Description: Consider...

...locomotive servicing when you are designing a garden railroad that will or might include live-steam....

...When Things Go Wrong Magazine: Garden Railways 2008-08 Page: 104 Category:...

Magazine Articles By Jim Strong
...07/05/2014 The Woodland Railway Magazine: Garden Railways 2005-12 Page: 66 Category:...

...how he came about building his large garden railroad that travels through the forest on...

Magazine Articles By Kevin Strong
...Metal Bits) Part 1 Magazine: Garden Railways 2005-12 Page: 27 Category:...

...metals. Custom Coal Loads Magazine: Garden Railways 2008-08 Page: 23 Category:...

...tender. The Numbers Game Magazine: Garden Railways 2009-04 Page: 18 Category:...

...(Ware) House Part 1 Magazine: Garden Railways 2008-10 Page: 19 Category:...

Magazine Articles By Larry Elsenheimer
...Stairs in Half-inch Scale Magazine: Garden Railways 2009-04 Page: 64 Category:...

Magazine Articles By Lou Sassi
...could focus on building has large scale garden layout. How To Make Better Scenery Magazine:...

Magazine Articles By Marc Horovitz
...the Ogden Botanical Railway Magazine: Garden Railways 2005-12 Page: 74 Category:...

...Trestle for the OBR Magazine: Garden Railways 2008-08 Page: 48 Category:...

...Large Scale Description: Combining gardening and garden railroading, but with a twist - using...

Magazine Articles By Mike Garforth
...the Seath Valley Railroad Magazine: Garden Railways 2008-08 Page: 64 Category:...

Magazine Articles By Nancy Norris
...Aquatics Have Wet Feet Magazine: Garden Railways 2008-08 Page: 37 Category:...

...2008-08 Page: 37 Category: Garden Railroading Scale: G Description: How...

...Step Up To Terraces Magazine: Garden Railways 2009-04 Page: 29 Category:...

...2009-04 Page: 29 Category: Garden Railroading Scale: G Description: The...

...describes how to design and build a garden railroad that is on a steep incline...

Magazine Articles By Pat Hayward
...10 Evergreen Forest Trees Magazine: Garden Railways 2005-12 Page: 43 Category:...

...grown to simulate scale trees for the garden railroad.

Magazine Articles By Peter B. Bryan
...1997-07 Page: 75 Category: Garden Railroading Scale: Large Scale Description:...

...Railroading Scale: Large Scale Description: Garden railroading to the extreme! This large-scale layout...

Magazine Articles By Peter Jones
... 07/05/2014 Complex Levels Magazine: Garden Railways 2005-12 Page: 108 Category:...

...Dealing with the vertical and grades of garden railroad construction. My Favorite Narrow-gauge Locomotive Magazine:...

...My Favorite Narrow-gauge Locomotive Magazine: Garden Railways 2009-04 Page: 46 Category:...

...About Planning and Layout Magazine: Garden Railways 2008-08 Page: 96 Category:...

...Railroad Philosophy Scale: G Description: Garden railroads are easily identified by their use...

...better. Small Scale Outdoors Magazine: Garden Railways 2009-04 Page: 82 Category:...

...2009-04 Page: 82 Category: Garden Railroading Description: Consider using O-scale and...

...using O-scale and smaller trains in your garden railroad as well.

Magazine Articles By Ray R. Dunakin III
...& Bridges part 1 Magazine: Garden Railways 2009-04 Page: 61 Category:...

...2009-04 Page: 61 Category: Garden Railroading Scale: G Description: In...

Magazine Articles By Rene Schweitzer
...Guide to Large-scale Figures Magazine: Garden Railways 2005-12 Page: 56 Category:...

Magazine Articles By Roger Baker
...layout. Five Into Three Magazine: Garden Railways 2009-04 Page: 42 Category:...

Magazine Articles By Spike Brown
...1977-07 Page: 64 Category: Garden Railroading Scale: Large Scale Description:...

Magazine Articles By Ted Stinson
...07/05/2014 1:20.3 One-horse Shay Magazine: Garden Railways 2005-12 Page: 70 Category:...

Magazine Articles By Walter Weart
... 07/05/2014 2009 Garden Railway Convention Preview Magazine: Garden...

...Garden Railway Convention Preview Magazine: Garden Railways 2009-04 Page: 40 Category:...

Magazine Articles By Wayne Wesolowski
...2011-12 Page: 54 Category: Garden Railroading Description: Building a Christmas planter...

Magazine Articles By William Harris
... 07/05/2014 Tools! Magazine: Garden Railways 2009-04 Page: 58 Category:...

Magazine Articles By Category
...Cars - Woodchip - 1 articles Garden Railroading - 16 articles Industries...

Magazine Articles By Category: Electronics
...Long is Your Railway? Magazine: Garden Railways 2005-12 Page: 76 Author:...

...odometer to measure the length of your garden railway. An updated article is available...

Magazine Articles By Category: Garden Railroading
My Library - Magazine Articles By Category: Garden Railroading My Library - Magazine Articles By...

...My Library - Magazine Articles By Category: Garden Railroading 07/05/2014...

... 07/05/2014 A Growing Garden Empire Magazine: Model Railroader 2006-08...

...The article features many photos and a garden design plan for this 75' by 80'...

...Aquatics Have Wet Feet Magazine: Garden Railways 2008-08 Page: 37 Author:...

...build a pondless water feature. Building a Garden Railway Part I Magazine: Railroad...

...the author got started in building a garden railroad. It covers the design of the...

...design of the track plan and the garden (including a list of plants used), and...

...the start of the project. Building a Garden Railway Part II Magazine: Railroad...

...will start the construction phase of his garden railroad. It covers preparing the ground, ballasting,...

...supports, planting plants, and structures. Building a Garden Railway Part III Magazine: Railroad...

...his series on how he built his garden railroad. This installment covers wiring and finishing...

...wiring, and the control panel. Designing a Garden Railway for Live-steam Locomotives Magazine:...

...Railway for Live-steam Locomotives Magazine: Garden Railways 2005-12 Page: 112 Author:...

...locomotive servicing when you are designing a garden railroad that will or might include live-steam....

...& Bridges part 1 Magazine: Garden Railways 2009-04 Page: 61 Author:...

...build a stone retaining wall. Jack Verducci's Garden Layout Magazine: Model Railroader 2000-04...

...Plants for Warmer Regions Magazine: Garden Railways 2009-04 Page: 72 Author:...

...author discusses some plants that useful for garden railroading in the southern tier states of...

...Trees for Warmer Climates Magazine: Garden Railways 2008-08 Page: 81 Author:...

...photos. Small Scale Outdoors Magazine: Garden Railways 2009-04 Page: 82 Author:...

...using O-scale and smaller trains in your garden railroad as well. Step Up To Terraces...

...Step Up To Terraces Magazine: Garden Railways 2009-04 Page: 29 Author:...

...describes how to design and build a garden railroad that is on a steep incline...

...Bryan Scale: Large Scale Description: Garden railroading to the extreme! This large-scale layout...

...Magical Side of Gardening Magazine: Garden Railways 2005-12 Page: 93 Author:...

... G Description: Ways to make garden railroading more whimsical and less serious.

Magazine Articles By Category: Layout Construction
...installing trees. Complex Levels Magazine: Garden Railways 2005-12 Page: 108 Author:...

...Dealing with the vertical and grades of garden railroad construction. Creating an Urban Scene for...

Magazine Articles By Category: Layouts - G
...in a Confined Space Magazine: Garden Railways 2008-08 Page: 54 Author:...

...and how he designed and constructed his garden layout. Includes a track plan, a listing...

...the Seath Valley Railroad Magazine: Garden Railways 2008-08 Page: 64 Author:...

...night-time operations. The Tuolomne Country Narrow Gauge Garden Railroad Magazine: Garden Railways 2009-04...

...Narrow Gauge Garden Railroad Magazine: Garden Railways 2009-04 Page: 50 Author:...

...describes the author's 30' x 60' home garden layout set in the 1920-30 period modeling...

...Gazette. The Woodland Railway Magazine: Garden Railways 2005-12 Page: 66 Author:...

...how he came about building his large garden railroad that travels through the forest on...

Magazine Articles By Category: Layouts - HO - Large
...could focus on building has large scale garden layout. Burr Stewart's BN Along Puget Sound...

Magazine Articles By Category: Live Steam
...Large Scale Description: Combining gardening and garden railroading, but with a twist - using...

Magazine Articles By Category: Locomotives - Steam
...the Ogden Botanical Railway Magazine: Garden Railways 2005-12 Page: 74 Author:...

...wiring. Custom Coal Loads Magazine: Garden Railways 2008-08 Page: 23 Author:...

...it. Five Into Three Magazine: Garden Railways 2009-04 Page: 42 Author:...

...My Favorite Narrow-gauge Locomotive Magazine: Garden Railways 2009-04 Page: 46 Author:...

...included. The Numbers Game Magazine: Garden Railways 2009-04 Page: 18 Author:...

...When Things Go Wrong Magazine: Garden Railways 2008-08 Page: 104 Author:...

Magazine Articles By Category: Model Railroad Philosophy
...About Planning and Layout Magazine: Garden Railways 2008-08 Page: 96 Author:...

...Peter Jones Scale: G Description: Garden railroads are easily identified by their use...

Magazine Articles By Category: Model Railroad Shows
... 07/05/2014 2009 Garden Railway Convention Preview Magazine: Garden...

...Garden Railway Convention Preview Magazine: Garden Railways 2009-04 Page: 40 Author:...

Magazine Articles By Category: Painting & Weathering
...Techniques for Realistic Results Magazine: Garden Railways 2008-08 Page: 70 Author:...

Magazine Articles By Category: Scenery - People & Animals
...Guide to Large-scale Figures Magazine: Garden Railways 2005-12 Page: 56 Author:...

Magazine Articles By Category: Scenery - Trees, Shrubs, Bushes
...10 Evergreen Forest Trees Magazine: Garden Railways 2005-12 Page: 43 Author:...

...grown to simulate scale trees for the garden railroad. Up The Creek - Modeling a...

Magazine Articles By Category: Scenery - Vehicles
...07/05/2014 1:20.3 One-horse Shay Magazine: Garden Railways 2005-12 Page: 70 Author:...

Magazine Articles By Category: Scratchbuilding
...Metal Bits) Part 1 Magazine: Garden Railways 2005-12 Page: 27 Author:...

Magazine Articles By Category: Structures
...them unique. Structures: Introduction Magazine: Garden Railways 2008-08 Page: 76 Author:...

...how to build structures for the outdoor garden. Styrene as Weathered Wood Magazine:...

Magazine Articles By Category: Structures - Bridges
...Trestle for the OBR Magazine: Garden Railways 2008-08 Page: 48 Author:...

...Building the Ninth Bridge Magazine: Garden Railways 2008-08 Page: 50 Author:...

Magazine Articles By Category: Structures - Depots/Stations/Yards
...Scatchbuilding a Yard Office Magazine: Garden Railways 2009-04 Page: 44 Author:...

Magazine Articles By Category: Structures - Homes
...clothing. Nightscaping Part 2 Magazine: Garden Railways 2005-12 Page: 90 Author:...

Magazine Articles By Category: Structures - Industrial
...Stairs in Half-inch Scale Magazine: Garden Railways 2009-04 Page: 64 Author:...

...(Ware) House Part 1 Magazine: Garden Railways 2008-10 Page: 19 Author:...

Magazine Articles By Category: Structures - Track-side Details
...Shack for Your Railway Magazine: Garden Railways 2008-08 Page: 46 Author:...

Magazine Articles By Category: Tools
...- Outdoor vs. Indoor Magazine: Garden Railways 2009-04 Page: 68 Author:...

...we have now. Tools! Magazine: Garden Railways 2009-04 Page: 58 Author:...

Magazine Articles By Issue
... 07/05/2014 1:64 Modeling Guide Garden Railways Model Railroad Hobbyist Model Railroader Model...

Magazine Issue for Garden Railways
My Library - Magazine Issue for Garden Railways My Library - Magazine Issue for...

...Railways My Library - Magazine Issue for Garden Railways 07/05/2014...

Garden Railways 2005-12 Articles
My Library - Garden Railways 2005-12 Articles My Library - Garden...

...Garden Railways 2005-12 Articles My Library - Garden Railways 2005-12 Articles...

...grown to simulate scale trees for the garden railroad. A Buyer's Guide to Large-scale Figures...

...how he came about building his large garden railroad that travels through the forest on...

...odometer to measure the length of your garden railway. An updated article is available...

... Don Parker Category: Garden Railroading Scale: G Description: Ways...

... G Description: Ways to make garden railroading more whimsical and less serious. Complex...

...Dealing with the vertical and grades of garden railroad construction. Designing a Garden Railway for...

...grades of garden railroad construction. Designing a Garden Railway for Live-steam Locomotives Page: 112...

... Jeff Young Category: Garden Railroading Scale: G Description: Consider...

...locomotive servicing when you are designing a garden railroad that will or might include live-steam.

Garden Railways 2008-08 Articles
My Library - Garden Railways 2008-08 Articles My Library - Garden...

...Garden Railways 2008-08 Articles My Library - Garden Railways 2008-08 Articles...

... Nancy Norris Category: Garden Railroading Scale: G Description: How...

...and how he designed and constructed his garden layout. Includes a track plan, a listing...

...how to build structures for the outdoor garden. Miniature Trees for Warmer Climates Page:...

... Don Parker Category: Garden Railroading Description: Various plants are discussed...

...Railroad Philosophy Scale: G Description: Garden railroads are easily identified by their use...

Garden Railways 2008-10 Articles
My Library - Garden Railways 2008-10 Articles My Library - Garden...

...Garden Railways 2008-10 Articles My Library - Garden Railways 2008-10 Articles...

Garden Railways 2009-04 Articles
My Library - Garden Railways 2009-04 Articles My Library - Garden...

...Garden Railways 2009-04 Articles My Library - Garden Railways 2009-04 Articles...

... Nancy Norris Category: Garden Railroading Scale: G Description: The...

...describes how to design and build a garden railroad that is on a steep incline...

...multiple levels. Several examples are shown. 2009 Garden Railway Convention Preview Page: 40 Author:...

...7th 4-8-0. The Tuolomne Country Narrow Gauge Garden Railroad Page: 50 Author:...

...describes the author's 30' x 60' home garden layout set in the 1920-30 period modeling...

...Ray R. Dunakin III Category: Garden Railroading Scale: G Description: In...

... Don Parker Category: Garden Railroading Scale: G Description: The...

...author discusses some plants that useful for garden railroading in the southern tier states of...

... Peter Jones Category: Garden Railroading Description: Consider using O-scale and...

...using O-scale and smaller trains in your garden railroad as well.

Model Railroader 1985-10 Articles
...Large Scale Description: Combining gardening and garden railroading, but with a twist - using...

Model Railroader 1997-07 Articles
... Peter B. Bryan Category: Garden Railroading Scale: Large Scale Description:...

...Railroading Scale: Large Scale Description: Garden railroading to the extreme! This large-scale layout...

Model Railroader 2000-04 Articles
...into one of these models. Jack Verducci's Garden Layout Page: 95 Author:...

... George Hall Category: Garden Railroading Scale: G Description: This...

Model Railroader 2006-07 Articles
...could focus on building has large scale garden layout. Build Your Own Signals Page:...

Model Railroader 2006-08 Articles
...install this into a locomotive. A Growing Garden Empire Page: 64 Author:...

... Cody Grivno Category: Garden Railroading Scale: G Description: The...

...The article features many photos and a garden design plan for this 75' by 80'...

Railroad Model Craftsman 1977-07 Articles
... Spike Brown Category: Garden Railroading Scale: Large Scale Description:...

Railroad Model Craftsman 1991-06 Articles
... 07/05/2014 Building a Garden Railway Part I Page: 48 Author:...

... Christopher P. D'Amato Category: Garden Railroading Scale: G Description: The...

...the author got started in building a garden railroad. It covers the design of the...

...design of the track plan and the garden (including a list of plants used), and...

Railroad Model Craftsman 1991-07 Articles
...scale photos, and detail drawings. Building a Garden Railway Part II Page: 72 Author:...

... Christopher P. D'Amato Category: Garden Railroading Scale: G Description: In...

...will start the construction phase of his garden railroad. It covers preparing the ground, ballasting,...

Railroad Model Craftsman 1991-08 Articles
...packing refrigerator cars after WWII. Building a Garden Railway Part III Page: 72 Author:...

... Christopher P. D'Amato Category: Garden Railroading Scale: G Description: The...

...his series on how he built his garden railroad. This installment covers wiring and finishing...

Railroad Model Craftsman 2011-12 Articles
... Wayne Wesolowski Category: Garden Railroading Description: Building a Christmas planter...

Magazine Articles for F Scale
...07/05/2014 1:20.3 One-horse Shay Magazine: Garden Railways 2005-12 Page: 70 Author:...

Magazine Articles for G Scale
... 07/05/2014 2009 Garden Railway Convention Preview Magazine: Garden...

...Garden Railway Convention Preview Magazine: Garden Railways 2009-04 Page: 40 Author:...

...for the convention are featured. A Growing Garden Empire Magazine: Model Railroader 2006-08...

... Cody Grivno Category: Garden Railroading Description: The article features many...

...The article features many photos and a garden design plan for this 75' by 80'...

...the Ogden Botanical Railway Magazine: Garden Railways 2005-12 Page: 74 Author:...

...Trestle for the OBR Magazine: Garden Railways 2008-08 Page: 48 Author:...

...Aquatics Have Wet Feet Magazine: Garden Railways 2008-08 Page: 37 Author:...

... Nancy Norris Category: Garden Railroading Description: How to build and...

...Shack for Your Railway Magazine: Garden Railways 2008-08 Page: 46 Author:...

...and setting up for operations. Building a Garden Railway Part I Magazine: Railroad...

... Christopher P. D'Amato Category: Garden Railroading Description: The first installment describes...

...the author got started in building a garden railroad. It covers the design of the...

...design of the track plan and the garden (including a list of plants used), and...

...the start of the project. Building a Garden Railway Part II Magazine: Railroad...

... Christopher P. D'Amato Category: Garden Railroading Description: In this installment the...

...will start the construction phase of his garden railroad. It covers preparing the ground, ballasting,...

...supports, planting plants, and structures. Building a Garden Railway Part III Magazine: Railroad...

... Christopher P. D'Amato Category: Garden Railroading Description: The author continues his...

...his series on how he built his garden railroad. This installment covers wiring and finishing...

...Building the Ninth Bridge Magazine: Garden Railways 2008-08 Page: 50 Author:...

...thousand parts. Complex Levels Magazine: Garden Railways 2005-12 Page: 108 Author:...

...Dealing with the vertical and grades of garden railroad construction. Craftsman Trophy To Mal Harvey...

...system. Custom Coal Loads Magazine: Garden Railways 2008-08 Page: 23 Author:...

...that goes into the tender. Designing a Garden Railway for Live-steam Locomotives Magazine:...

...Railway for Live-steam Locomotives Magazine: Garden Railways 2005-12 Page: 112 Author:...

... Jeff Young Category: Garden Railroading Description: Consider height, gradients, curve...

...locomotive servicing when you are designing a garden railroad that will or might include live-steam....

...Stairs in Half-inch Scale Magazine: Garden Railways 2009-04 Page: 64 Author:...

...scale. Five Into Three Magazine: Garden Railways 2009-04 Page: 42 Author:...

...Long is Your Railway? Magazine: Garden Railways 2005-12 Page: 76 Author:...

...odometer to measure the length of your garden railway. An updated article is available...

...& Bridges part 1 Magazine: Garden Railways 2009-04 Page: 61 Author:...

...Ray R. Dunakin III Category: Garden Railroading Description: In this installment, the...

...build a stone retaining wall. Jack Verducci's Garden Layout Magazine: Model Railroader 2000-04...

... George Hall Category: Garden Railroading Description: This layout encompasses an...

...Plants for Warmer Regions Magazine: Garden Railways 2009-04 Page: 72 Author:...

... Don Parker Category: Garden Railroading Description: The author discusses some...

...author discusses some plants that useful for garden railroading in the southern tier states of...

...U.S. Nightscaping Part 2 Magazine: Garden Railways 2005-12 Page: 90 Author:...

...About Planning and Layout Magazine: Garden Railways 2008-08 Page: 96 Author:...

... Model Railroad Philosophy Description: Garden railroads are easily identified by their use...

...Scatchbuilding a Yard Office Magazine: Garden Railways 2009-04 Page: 44 Author:...

...in a Confined Space Magazine: Garden Railways 2008-08 Page: 54 Author:...

...and how he designed and constructed his garden layout. Includes a track plan, a listing...

...Step Up To Terraces Magazine: Garden Railways 2009-04 Page: 29 Author:...

... Nancy Norris Category: Garden Railroading Description: The author describes how...

...describes how to design and build a garden railroad that is on a steep incline...

...are shown. Structures: Introduction Magazine: Garden Railways 2008-08 Page: 76 Author:...

...how to build structures for the outdoor garden. Ted Greeno's Southwest & Western RR Magazine:...

...Magical Side of Gardening Magazine: Garden Railways 2005-12 Page: 93 Author:...

... Don Parker Category: Garden Railroading Description: Ways to make garden...

...Garden Railroading Description: Ways to make garden railroading more whimsical and less serious. The...

...the Seath Valley Railroad Magazine: Garden Railways 2008-08 Page: 64 Author:...

...night-time operations. The Tuolomne Country Narrow Gauge Garden Railroad Magazine: Garden Railways 2009-04...

...Narrow Gauge Garden Railroad Magazine: Garden Railways 2009-04 Page: 50 Author:...

...describes the author's 30' x 60' home garden layout set in the 1920-30 period modeling...

...Gazette. The Woodland Railway Magazine: Garden Railways 2005-12 Page: 66 Author:...

...how he came about building his large garden railroad that travels through the forest on...

...Techniques for Realistic Results Magazine: Garden Railways 2008-08 Page: 70 Author:...

...When Things Go Wrong Magazine: Garden Railways 2008-08 Page: 104 Author:...

Magazine Articles for HO Scale
...could focus on building has large scale garden layout. Build Southern's Big John Magazine:...

Magazine Articles for Large Scale Scale
...Guide to Large-scale Figures Magazine: Garden Railways 2005-12 Page: 56 Author:...

... Spike Brown Category: Garden Railroading Description: Gordon Hatch's backyard has...

...Live Steam Description: Combining gardening and garden railroading, but with a twist - using...

... Peter B. Bryan Category: Garden Railroading Description: Garden railroading to the...

...Category: Garden Railroading Description: Garden railroading to the extreme! This large-scale layout...

Railroading Videos
...the Railroad DIY: Working on the Railroad (Garden Railroading) Easy Backdrop Painting Great Model Railroads...

Railroading Videos - DIY: Working on the Railroad (Garden Railroading)
...Videos - DIY: Working on the Railroad (Garden Railroading) My Library - Railroading Videos -...

...Videos - DIY: Working on the Railroad (Garden Railroading) Format: Video Tape Publisher: DIY Network...

...2006 all about how to build a garden railroad.

Structures - Church
...church with the hint of a small garden. There are three, custom-painted figures on the...

gardening
Scenery - Scenery Base
...part Vermiculite (I get mine at the gardening center of Lowe's) - one part latex...

Magazine Articles By Don Parker
...U.S. states' weather. The Magical Side of Gardening Magazine: Garden Railways 2005-12 Page:...

Magazine Articles By Marc Horovitz
...Scale: Large Scale Description: Combining gardening and garden railroading, but with a twist...

Magazine Articles By Category: Garden Railroading
...one can get. The Magical Side of Gardening Magazine: Garden Railways 2005-12 Page:...

Magazine Articles By Category: Live Steam
...Scale: Large Scale Description: Combining gardening and garden railroading, but with a twist...

Garden Railways 2005-12 Articles
...inside the house. The Magical Side of Gardening Page: 93 Author: Don...

Model Railroader 1985-10 Articles
...Scale: Large Scale Description: Combining gardening and garden railroading, but with a twist...

Magazine Articles for G Scale
...HOn3 wooden kit. The Magical Side of Gardening Magazine: Garden Railways 2005-12 Page:...

Magazine Articles for Large Scale Scale
... Live Steam Description: Combining gardening and garden railroading, but with a twist...

garforth
Magazine Articles By Author
...Mike Dodd - 2 articles Mike Garforth - 1 articles Mike Hammer...

Magazine Articles By Mike Garforth
My Library - Magazine Articles By Mike Garforth My Library - Magazine Articles By Mike...

...My Library - Magazine Articles By Mike Garforth 07/05/2014 The...

Magazine Articles By Category: Layouts - G
...Page: 64 Author: Mike Garforth Scale: G Description: This 1:24...

Garden Railways 2008-08 Articles
...Page: 64 Author: Mike Garforth Category: Layouts - G Scale:...

Magazine Articles for G Scale
...Page: 64 Author: Mike Garforth Category: Layouts - G Description:...

gargraves
The Hobby - Changing Modeling Scales
...to have one S scale track template (Gargraves). This provides a dose of reality to...

garland
Magazine Articles By Debie Baker-Snell
...for the Christmas holidays. Ideas include wreaths, garland, blow-up yard decorations, street light decorations, a...

Magazine Articles By Category: Scenery - Streets
...for the Christmas holidays. Ideas include wreaths, garland, blow-up yard decorations, street light decorations, a...

Railroad Model Craftsman 2008-12 Articles
...for the Christmas holidays. Ideas include wreaths, garland, blow-up yard decorations, street light decorations, a...

Magazine Articles for HO Scale
...for the Christmas holidays. Ideas include wreaths, garland, blow-up yard decorations, street light decorations, a...

garner
Magazine Articles By Author
...Tim Frederick - 1 articles Tim Garner - 2 articles Tim Trewhella...

Magazine Articles By Tim Garner
My Library - Magazine Articles By Tim Garner My Library - Magazine Articles By Tim...

...My Library - Magazine Articles By Tim Garner 07/05/2014 Making...

Magazine Articles By Category: Structures - Bridges
...Page: 18 Author: Tim Garner Scale: HO Description: Covers the...

Magazine Articles By Category: Structures - Depots/Stations/Yards
...Page: 31 Author: Tim Garner Description: This article describes how to...

The Keystone Modeler 72 Winter 2010 Articles
...Page: 31 Author: Tim Garner Category: Structures - Depots/Stations/Yards Description:...

The Keystone Modeler 74 Summer 2010 Articles
...Page: 18 Author: Tim Garner Category: Structures - Bridges Scale:...

Magazine Articles for HO Scale
...Page: 18 Author: Tim Garner Category: Structures - Bridges Description:...

garrett
Magazine Articles By Author
...G.R. Stillwell, Jr. - 1 articles Garrett Rea - 1 articles Garry F....

...Jeff Abbott - 1 articles Jeff Garrett - 1 articles Jeff Griffin...

...Tom Dressler - 3 articles Tom Garrett - 1 articles Tom Griffiths...

Magazine Articles By Garrett Rea
My Library - Magazine Articles By Garrett Rea My Library - Magazine Articles By...

...Rea My Library - Magazine Articles By Garrett Rea 07/05/2014...

Magazine Articles By Jeff Garrett
My Library - Magazine Articles By Jeff Garrett My Library - Magazine Articles By Jeff...

...My Library - Magazine Articles By Jeff Garrett 07/05/2014 Digital...

Magazine Articles By Tom Garrett
My Library - Magazine Articles By Tom Garrett My Library - Magazine Articles By Tom...

...My Library - Magazine Articles By Tom Garrett 07/05/2014 Modeling...

Magazine Articles By Category: DCC
...Page: 36 Author: Jeff Garrett Description: Primer on DCC. Electric Flywheel...

Magazine Articles By Category: Freight Cars - Gondolas
...Modeler 06 January 2004 Author: Garrett Rea Scale: HO Description: The...

Magazine Articles By Category: Freight Cars - Stock Cars
...Page: 111 Author: Tom Garrett Scale: HO Description: The author...

Model Railroader 1996-10 Articles
...Page: 111 Author: Tom Garrett Category: Freight Cars - Stock...

NMRA Bulletin 2003-03 Articles
...Page: 36 Author: Jeff Garrett Category: DCC Description: Primer...

The Keystone Modeler 06 January 2004 Articles
...a Steel Slab Load Author: Garrett Rea Category: Freight Cars -...

Magazine Articles for HO Scale
...Modeler 06 January 2004 Author: Garrett Rea Category: Freight Cars -...

...Page: 111 Author: Tom Garrett Category: Freight Cars - Stock...

garry
Scenery - Telegraph/Telephone Poles
...an article about utility poles. The author Garry Woodard describes how he scratchbuilt the poles....

Magazine Articles By Author
...articles Garrett Rea - 1 articles Garry F. Cerrone - 1 articles Garry...

...Garry F. Cerrone - 1 articles Garry Lance - 1 articles Garry Woodard...

...articles Garry Lance - 1 articles Garry Woodard - 1 articles Gary Carmichael...

Magazine Articles By Garry F. Cerrone
My Library - Magazine Articles By Garry F. Cerrone My Library - Magazine Articles...

...Cerrone My Library - Magazine Articles By Garry F. Cerrone...

Magazine Articles By Garry Lance
My Library - Magazine Articles By Garry Lance My Library - Magazine Articles By...

...Lance My Library - Magazine Articles By Garry Lance 07/05/2014...

Magazine Articles By Garry Woodard
My Library - Magazine Articles By Garry Woodard My Library - Magazine Articles By...

...Woodard My Library - Magazine Articles By Garry Woodard 07/05/2014...

Magazine Articles By Category: Locomotives - Steam
...1987-11 Page: 131 Author: Garry F. Cerrone Description: Using 5-minute epoxy...

Magazine Articles By Category: Structures - Industrial
...2007-10 Page: 78 Author: Garry Lance Scale: N Description: The...

Magazine Articles By Category: Structures - Track-side Details
...2005 Page: 60 Author: Garry Woodard Scale: O Description: Describes...

Model Railroader 1987-11 Articles
...Way Page: 131 Author: Garry F. Cerrone Category: Locomotives -...

O Scale Trains Magazine 23 November 2005 Articles
...Poles Page: 60 Author: Garry Woodard Category: Structures - Track-side...

Railroad Model Craftsman 2007-10 Articles
...Unloader Page: 78 Author: Garry Lance Category: Structures - Industrial...

Magazine Articles for N Scale
...2007-10 Page: 78 Author: Garry Lance Category: Structures - Industrial...

Magazine Articles for O Scale
...2005 Page: 60 Author: Garry Woodard Category: Structures - Track-side...

gartrell
Magazine Articles By Author
...Charles Derus - 3 articles Charles Gartrell - 1 articles Charles J. Devine...

Magazine Articles By Charles Gartrell
My Library - Magazine Articles By Charles Gartrell My Library - Magazine Articles By Charles...

...My Library - Magazine Articles By Charles Gartrell 07/05/2014 Visiting...

Magazine Articles By Category: Layouts - HO - Small
...Page: 60 Author: Charles Gartrell Scale: HO Description: An L-shaped,...

Railroad Model Craftsman 2003-01 Articles
...Page: 60 Author: Charles Gartrell Category: Layouts - HO -...

Magazine Articles for HO Scale
...Page: 60 Author: Charles Gartrell Category: Layouts - HO -...

gary
Chartiers Branch - Canonsburg Passenger Station
...glory days. This photo was taken by Gary Carmichael in September 2010, and he has...

Equipment - B&O M53 Box Car - Prototype Information
...one day I received an e-mail from Gary Carmichael. He models the Waynesburg & Washington...

...from a tinplate mill in Washington, PA. Gary's recommendation was that I should consider adding...

The PRR Chartiers Branch - Progress Report - 2011-12 Report
...have plenty of prototype information (thanks to Gary Carmichael), and so this mock-up is made...

Railroading Books - Great Model Railroads 1994
...Missouri, Kansas & Quincy: a Railfan's Railroad Gary Hoover's HO-scale layout. 20 The Ozark...

Railroading Books - Great Model Railroads 1996
...RR HO-scale layout by Randy Wilson with Gary Waite. 38 The HO Scale Schoharie...

Magazine Articles By Author
...articles Garry Woodard - 1 articles Gary Carmichael - 5 articles Gary Caviglia...

...articles Gary Carmichael - 5 articles Gary Caviglia - 4 articles Gary Hoover...

...articles Gary Caviglia - 4 articles Gary Hoover - 6 articles Gary McCullah...

...articles Gary Hoover - 6 articles Gary McCullah - 1 articles Gary Petersen...

...articles Gary McCullah - 1 articles Gary Petersen - 1 articles Gary Walton...

...articles Gary Petersen - 1 articles Gary Walton - 1 articles Gary Woodard...

...articles Gary Walton - 1 articles Gary Woodard - 1 articles Gary Wright...

...articles Gary Woodard - 1 articles Gary Wright - 1 articles Gaylord Gill...

Magazine Articles By Garry Woodard
...Scale: O Description: Describes how Gary built his telephone and telegraph poles. The...

Magazine Articles By Gary Carmichael
My Library - Magazine Articles By Gary Carmichael My Library - Magazine Articles By...

...Carmichael My Library - Magazine Articles By Gary Carmichael 07/05/2014...

...Railroad Shows Scale: S Description: Gary reports on what he saw at the...

... Modules Scale: S Description: Gary is recycling a set of modules he...

...and People Scale: S Description: Gary specifically mentions people that are helping S-scale...

...Groups, the Sn2 Crew group (of which Gary is a contributing member).

Magazine Articles By Gary Caviglia
My Library - Magazine Articles By Gary Caviglia My Library - Magazine Articles By...

...Caviglia My Library - Magazine Articles By Gary Caviglia 07/05/2014...

Magazine Articles By Gary Hoover
My Library - Magazine Articles By Gary Hoover My Library - Magazine Articles By...

...Hoover My Library - Magazine Articles By Gary Hoover 07/05/2014...

Magazine Articles By Gary McCullah
My Library - Magazine Articles By Gary McCullah My Library - Magazine Articles By...

...McCullah My Library - Magazine Articles By Gary McCullah 07/05/2014...

Magazine Articles By Gary Petersen
My Library - Magazine Articles By Gary Petersen My Library - Magazine Articles By...

...Petersen My Library - Magazine Articles By Gary Petersen 07/05/2014...

Magazine Articles By Gary Walton
My Library - Magazine Articles By Gary Walton My Library - Magazine Articles By...

...Walton My Library - Magazine Articles By Gary Walton 07/05/2014...

Magazine Articles By Gary Woodard
My Library - Magazine Articles By Gary Woodard My Library - Magazine Articles By...

...Woodard My Library - Magazine Articles By Gary Woodard 07/05/2014...

Magazine Articles By Gary Wright
My Library - Magazine Articles By Gary Wright My Library - Magazine Articles By...

...Wright My Library - Magazine Articles By Gary Wright 07/05/2014...

Magazine Articles By Category: Dioramas
...2000-01 Page: 82 Author: Gary Hoover Scale: HO Description: A...

Magazine Articles By Category: Freight Cars
...2002 Page: 11 Author: Gary Woodard Description: Describes the NMRA-recommended weights...

Magazine Articles By Category: Layout Design
...2005-06 Page: 10 Author: Gary McCullah Scale: S Description: The...

Magazine Articles By Category: Layouts
...2002-08 Page: 74 Author: Gary Hoover Scale: HO Description: Diaphragms...

Magazine Articles By Category: Locomotives - Steam
...a Bachmann 2-8-2 into a 2-6-2 Prairie. Gary Mittner’s 1:29 Scale Class B6SB - 4001...

...2008-11/12 Page: 56 Author: Gary Caviglia Description: This two-pager shows scale...

...2007-01/02 Page: 54 Author: Gary Caviglia Description: Scale drawings of engines...

Magazine Articles By Category: Model Automobiles and Trucks
...2002-07 Page: 26 Author: Gary Walton Scale: HO Description: Building...

Magazine Articles By Category: Model Railroad Shows
...Fall Page: 20 Author: Gary Carmichael Scale: S Description: Gary...

...Gary Carmichael Scale: S Description: Gary reports on what he saw at the...

...2010-02 Page: 59 Author: Gary Hoover Description: This article describes some...

...2010-04 Page: 59 Author: Gary Hoover Description: Shows photos of Greg...

Magazine Articles By Category: Model Railroads and People
...Spring Page: 24 Author: Gary Carmichael Scale: S Description: Gary...

...Gary Carmichael Scale: S Description: Gary specifically mentions people that are helping S-scale...

...Groups, the Sn2 Crew group (of which Gary is a contributing member). Editor's Favorite 60...

Magazine Articles By Category: Modules
...Fall Page: 24 Author: Gary Carmichael Scale: S Description: Gary...

...Gary Carmichael Scale: S Description: Gary is recycling a set of modules he...

...Summer Page: 23 Author: Gary Carmichael Scale: S Description: The...

...Winter Page: 23 Author: Gary Carmichael Scale: S Description: The...

Magazine Articles By Category: Operations
...2005-12 Page: 94 Author: Gary Petersen Description: The author describes how...

Magazine Articles By Category: Passenger Cars
...2009-12 Page: 63 Author: Gary Wright Scale: G Description: The...

Magazine Articles By Category: Scenery - Waterside
...1985-12 Page: 112 Author: Gary Hoover Description: Using white cotton and...

Magazine Articles By Category: Scratchbuilding
...2002-07 Page: 24 Author: Gary Hoover Description: Using the kit to...

Magazine Articles By Category: Structures - Depots/Stations/Yards
...2008-09/10 Page: 50 Author: Gary Caviglia Description: Scale drawings of this...

...2008-09/10 Page: 74 Author: Gary Caviglia Description: Scale drawings of this...

Magazine Articles By Category: Structures - Track-side Details
...Scale: O Description: Describes how Gary built his telephone and telegraph poles. The...

1:64 Modeling Guide 2009 Fall Articles
...Junction Page: 24 Author: Gary Carmichael Category: Modules Scale:...

... Modules Scale: S Description: Gary is recycling a set of modules he...

1:64 Modeling Guide 2012 Fall Articles
...Junction Page: 20 Author: Gary Carmichael Category: Model Railroad Shows...

...Railroad Shows Scale: S Description: Gary reports on what he saw at the...

1:64 Modeling Guide 2012 Spring Articles
...Junction Page: 24 Author: Gary Carmichael Category: Model Railroads and...

...and People Scale: S Description: Gary specifically mentions people that are helping S-scale...

...Groups, the Sn2 Crew group (of which Gary is a contributing member). From the Observation...

1:64 Modeling Guide 2012 Summer Articles
...Junction Page: 23 Author: Gary Carmichael Category: Modules Scale:...

1:64 Modeling Guide 2012 Winter Articles
...Junction Page: 23 Author: Gary Carmichael Category: Modules Scale:...

Model Railroader 1985-12 Articles
...Water Page: 112 Author: Gary Hoover Category: Scenery - Waterside...

Model Railroader 2000-01 Articles
...Sedalia Page: 82 Author: Gary Hoover Category: Dioramas Scale:...

Model Railroader 2002-08 Articles
...Way Page: 74 Author: Gary Hoover Category: Layouts Scale:...

Model Railroader 2005-12 Articles
...Southern Page: 94 Author: Gary Petersen Category: Operations Description:...

Model Railroading 2002-07 Articles
...6 Page: 26 Author: Gary Walton Category: Model Automobiles and...

Narrow Gauge And Short Line Gazette 2007-01/02 Articles
...#13 Page: 54 Author: Gary Caviglia Category: Locomotives - Steam...

Narrow Gauge And Short Line Gazette 2008-09/10 Articles
...Shelter Page: 50 Author: Gary Caviglia Category: Structures - Depots/Stations/Yards...

...Station Page: 74 Author: Gary Caviglia Category: Structures - Depots/Stations/Yards...

Narrow Gauge And Short Line Gazette 2008-11/12 Articles
...Railroad Page: 56 Author: Gary Caviglia Category: Locomotives - Steam...

NASG Dispatch 2005-06 Articles
...Plan Page: 10 Author: Gary McCullah Category: Layout Design Scale:...

NMRA Bulletin 2002-07 Articles
...1-Kit Page: 24 Author: Gary Hoover Category: Scratchbuilding Description:...

O Scale Trains Magazine 01 March 2002 Articles
...Cars Page: 11 Author: Gary Woodard Category: Freight Cars Description:...

O Scale Trains Magazine 23 November 2005 Articles
...Scale: O Description: Describes how Gary built his telephone and telegraph poles. The...

Railroad Model Craftsman 2009-12 Articles
...Car Page: 63 Author: Gary Wright Category: Passenger Cars Scale:...

Railroad Model Craftsman 2010-02 Articles
...I Page: 59 Author: Gary Hoover Category: Model Railroad Shows...

Railroad Model Craftsman 2010-04 Articles
...III Page: 59 Author: Gary Hoover Category: Model Railroad Shows...

The Keystone Modeler 04 November 2003 Articles
...about the GS gondola as work equipment. Gary Mittner’s 1:29 Scale Class B6SB - 4001...

Magazine Articles for G Scale
...2009-12 Page: 63 Author: Gary Wright Category: Passenger Cars Description:...

...of people who create G-scale portable modules. Gary Mittner’s 1:29 Scale Class B6SB - 4001...

Magazine Articles for HO Scale
...2000-01 Page: 82 Author: Gary Hoover Category: Dioramas Description:...

...2002-08 Page: 74 Author: Gary Hoover Category: Layouts Description:...

...2002-07 Page: 26 Author: Gary Walton Category: Model Automobiles and...

Magazine Articles for O Scale
...- Track-side Details Description: Describes how Gary built his telephone and telegraph poles. The...

Magazine Articles for S Scale
...Fall Page: 20 Author: Gary Carmichael Category: Model Railroad Shows...

... Model Railroad Shows Description: Gary reports on what he saw at the...

...Spring Page: 24 Author: Gary Carmichael Category: Model Railroads and...

... Model Railroads and People Description: Gary specifically mentions people that are helping S-scale...

...Groups, the Sn2 Crew group (of which Gary is a contributing member). Eastern Junction Magazine:...

...Winter Page: 23 Author: Gary Carmichael Category: Modules Description:...

...Summer Page: 23 Author: Gary Carmichael Category: Modules Description:...

...Fall Page: 24 Author: Gary Carmichael Category: Modules Description:...

...Carmichael Category: Modules Description: Gary is recycling a set of modules he...

...2005-06 Page: 10 Author: Gary McCullah Category: Layout Design Description:...

Canonsburg Passenger Station - Planning
...that, and the prototype photos provided by Gary Carmichael, that is how I came up...

...height of the foundation. In September 2010, Gary Carmichael took some photos of the actual...

...web site. I am extremely grateful to Gary for taking his time to do this....

...was good to finally meet you face-to-face, Gary, at the 2013 NASG Convention in Scranton,...

...way. (photo: copyright 2010 Gary Carmichael - used by permission) Next is,...

...center. (photo: copyright 2010 Gary Carmichael - used by permission) The protruding,...

...office. (photo: copyright 2010 Gary Carmichael - used by permission) The right-most...

...door. (photo: copyright 2010 Gary Carmichael - used by permission)

gas
S-scale Vehicles - 1946 Dodge DeSoto Truck
...moon rover version! I cleaned up the gas tanks, rounded over the corners a bit,...

Chartiers Branch - Track
... 1081'3" Magnolia Colliery - Chartiers Gas Coal Co. 13.? 1081'?...

Chartiers Branch - Tylerdale Connection
...due to the discovery of cheap natural gas and proximity of Chartiers creek which ran...

Chartiers Branch - Washington
...hub of the current Marcellus Shale natural gas bonanza.

Magazine Articles By Charles Ansell
... 07/05/2014 S Scale Gas Station Kitbash Magazine: Railroad Model...

...Builders' Dill's Market kit to build this gas station. Includes two model photos.

Magazine Articles By Chuck Diljak
... 48 Category: Locomotives - Gas Electric Scale: HO Description: The...

Magazine Articles By Dean Freytag
...vehicle used by steel mills. Combine to Gas-electric Magazine: Railroad Model Craftsman 1973-05...

... 29 Category: Locomotives - Gas Electric Scale: HO Description: Dean...

...Scale: HO Description: Dean built gas-electric combine ("Doodlebug") out of a passenger car...

Magazine Articles By Don Railton
... 07/05/2014 A Gas Station Diorama Magazine: The Modeler's...

...A 1:32 scale of a small country gas station.

Magazine Articles By Elmer Cerny
... 07/05/2014 The Wasco Gas Station, Garage, and Grocery Magazine:...

Magazine Articles By Harry Bonham
...Description: This article describes a propane gas distributor in Lane County, Oregon. It has...

Magazine Articles By James A. Ferguson
...Scale: HO Description: A neat gas station and repair shop with an upstairs...

Magazine Articles By Jeff Kersting
...HO Description: Using a Bachmann Texaco gas station, the author created a convincing model...

...author created a convincing model of a gas station he passes on his way to...

Magazine Articles By Jeff Wilson
... 44 Category: Locomotives - Gas Electric Electricity Magazine: Model Railroader...

Magazine Articles By John S. Midgley
...quarry rock near Salt Lake City. Sinclair Gas Station, Elberta, Utah Magazine: Narrow...

Magazine Articles By Ken Lawrence
... 66 Category: Locomotives - Gas Electric Scale: HO Description: The...

Magazine Articles By Kurt Mirish
... 07/05/2014 Kitbashing a Gas-electric Railcar Magazine: Railroad Model Craftsman...

... 60 Category: Locomotives - Gas Electric Scale: HO Description: Article...

Magazine Articles By Peter Barney
...Includes a scale drawing. Build a Small Gas Station Magazine: Railroad Model Craftsman...

...Scale: O Description: This small gas station was very common before the era...

Magazine Articles By Richard Dunn
... 07/05/2014 Vulcan Two-ton Gas Locomotive Magazine: Railroad Model Craftsman...

... 71 Category: Locomotives - Gas Electric Description: The prototype use a...

Magazine Articles By Richard J. Anderson
... 80 Category: Locomotives - Gas Electric Scale: HO Description: The...

...railroad converted a baggage car into a gas-electric motor car in 1941. The author used...

Magazine Articles By Robert Bennett
...layout. They include a general store, a gas station, a garage, a fast-food place, and...

Magazine Articles By Robert Smaus
... Changing the interiors. Kitbashing a Small Gas Station Magazine: Railroad Model Craftsman...

...HO Description: Adding details to a gas station. Modeling Amtrak in the West: An...

Magazine Articles By Steve Sint
...walls, and interior details common for small gas stations. Rebuilding a Docksider Magazine:...

Magazine Articles By Thomas A. Yorke
...photos accompany this article about a small gas station built in 1926 in Mountain City,...

Magazine Articles By Walter R. Olsen
...Includes construction and final installation photos. Old-time Gas Station Magazine: Model Railroader 1977-03...

...describes how he built a typical small-town gas station. Includes scaled drawings, including one that...

...the various parts that go into a gas station. Several construction photos are shown as...

Magazine Articles By Category
...Electric - 22 articles Locomotives - Gas Electric - 7 articles Locomotives -...

Magazine Articles By Category: Dioramas
...area in 1900, 1950, and 1999. A Gas Station Diorama Magazine: The Modeler's...

...A 1:32 scale of a small country gas station. A Trio of Scenic Inserts Magazine:...

Magazine Articles By Category: Locomotives - Gas Electric
...- Magazine Articles By Category: Locomotives - Gas Electric My Library - Magazine Articles By...

...- Magazine Articles By Category: Locomotives - Gas Electric 07/05/2014...

... 07/05/2014 Combine to Gas-electric Magazine: Railroad Model Craftsman 1973-05...

...Scale: HO Description: Dean built gas-electric combine ("Doodlebug") out of a passenger car...

...railroad converted a baggage car into a gas-electric motor car in 1941. The author used...

...to create this unique car. Kitbashing a Gas-electric Railcar Magazine: Railroad Model Craftsman...

...Includes model and prototype photos. Vulcan Two-ton Gas Locomotive Magazine: Railroad Model Craftsman...

Magazine Articles By Category: Structures
...layout. They include a general store, a gas station, a garage, a fast-food place, and...

Magazine Articles By Category: Structures - Automobiles
...one Railway Express terminal.. Kitbashing a Small Gas Station Magazine: Railroad Model Craftsman...

...HO Description: Adding details to a gas station. Martin's Garage: Gutting It and Studding...

...walls, and interior details common for small gas stations. S Scale Gas Station Kitbash Magazine:...

...common for small gas stations. S Scale Gas Station Kitbash Magazine: Railroad Model...

...Builders' Dill's Market kit to build this gas station. Includes two model photos. Vehicle Building...

Magazine Articles By Category: Structures - Towns/Cities
...author built a nice-looking model of a gas/service station. A turn-of-the-century bakery Magazine:...

...and final installation photos. Build a Small Gas Station Magazine: Railroad Model Craftsman...

...Scale: O Description: This small gas station was very common before the era...

...photos accompany this article about a small gas station built in 1926 in Mountain City,...

...HO Description: Using a Bachmann Texaco gas station, the author created a convincing model...

...author created a convincing model of a gas station he passes on his way to...

...Scale: HO Description: A neat gas station and repair shop with an upstairs...

...trolley body to model a shed. Old-time Gas Station Magazine: Model Railroader 1977-03...

...describes how he built a typical small-town gas station. Includes scaled drawings, including one that...

...the various parts that go into a gas station. Several construction photos are shown as...

...includes scaled drawings and model photos. Sinclair Gas Station, Elberta, Utah Magazine: Narrow...

...Description: This article describes a propane gas distributor in Lane County, Oregon. It has...

...a prototype photo, are included. The Wasco Gas Station, Garage, and Grocery Magazine:...

Model Railroader 1977-03 Articles
...and detail drawings, and construction photos. Old-time Gas Station Page: 89 Author:...

...describes how he built a typical small-town gas station. Includes scaled drawings, including one that...

...the various parts that go into a gas station. Several construction photos are shown as...

Model Railroader 1978-03 Articles
...Johnson's Duplex Compound 0-6-6-0T engine. The Wasco Gas Station, Garage, and Grocery Page: 66...

Model Railroader 1979-02 Articles
...Scale: HO Description: A neat gas station and repair shop with an upstairs...

Model Railroader 2000-04 Articles
...Jeff Wilson Category: Locomotives - Gas Electric Working the Mill Job Page:...

Narrow Gauge And Short Line Gazette 2008-11/12 Articles
...woods. Include prototype and model photos. Sinclair Gas Station, Elberta, Utah Page: 82 Author:...

Railroad Model Craftsman 1973-05 Articles
...and construction and scale drawings. Combine to Gas-electric Page: 29 Author: Dean...

...Dean Freytag Category: Locomotives - Gas Electric Scale: HO Description: Dean...

...Scale: HO Description: Dean built gas-electric combine ("Doodlebug") out of a passenger car...

Railroad Model Craftsman 1991-05 Articles
...photos, and a roster. Build a Small Gas Station Page: 82 Author:...

...Scale: O Description: This small gas station was very common before the era...

Railroad Model Craftsman 1991-06 Articles
...Description: This article describes a propane gas distributor in Lane County, Oregon. It has...

Railroad Model Craftsman 1996-02 Articles
...HO Description: Using a Bachmann Texaco gas station, the author created a convincing model...

...author created a convincing model of a gas station he passes on his way to...

Railroad Model Craftsman 1996-03 Articles
...photos accompany this article about a small gas station built in 1926 in Mountain City,...

Railroad Model Craftsman 2002-11 Articles
...layout wall. Nice weathering. Kitbashing a Small Gas Station Page: 60 Author:...

...HO Description: Adding details to a gas station. Snowplow Mounts for Highway Trucks Page:...

Railroad Model Craftsman 2003-07 Articles
...detailed drawing of the parts. S Scale Gas Station Kitbash Page: 59 Author:...

...Builders' Dill's Market kit to build this gas station. Includes two model photos. The Lowly...

Railroad Model Craftsman 2005-03 Articles
...of these types of equipment. Kitbashing a Gas-electric Railcar Page: 60 Author:...

...Kurt Mirish Category: Locomotives - Gas Electric Scale: HO Description: Article...

Railroad Model Craftsman 2006-01 Articles
...walls, and interior details common for small gas stations. Detailing a Penn Central N-8 Caboose...

Railroad Model Craftsman 2006-09 Articles
...J. Anderson Category: Locomotives - Gas Electric Scale: HO Description: The...

...railroad converted a baggage car into a gas-electric motor car in 1941. The author used...

Railroad Model Craftsman 2007-03 Articles
...Ken Lawrence Category: Locomotives - Gas Electric Scale: HO Description: The...

Railroad Model Craftsman 2007-04 Articles
...Chuck Diljak Category: Locomotives - Gas Electric Scale: HO Description: The...

Railroad Model Craftsman 2010-03 Articles
...layout. They include a general store, a gas station, a garage, a fast-food place, and...

Railroad Model Craftsman 2010-08 Articles
...here for more information . Vulcan Two-ton Gas Locomotive Page: 71 Author:...

...Richard Dunn Category: Locomotives - Gas Electric Description: The prototype use a...

The Modeler's Annual Winter 2014 Articles
...of an abandoned small country store. A Gas Station Diorama Page: 91 Author:...

...A 1:32 scale of a small country gas station. Cardboard Brick, Plaster Concrete, And Painted...

Magazine Articles for HO Scale
...large around-the-wall and peninsula design. Combine to Gas-electric Magazine: Railroad Model Craftsman 1973-05...

...Dean Freytag Category: Locomotives - Gas Electric Description: Dean built gas-electric combine...

...- Gas Electric Description: Dean built gas-electric combine ("Doodlebug") out of a passenger car...

...J. Anderson Category: Locomotives - Gas Electric Description: The railroad converted a...

...railroad converted a baggage car into a gas-electric motor car in 1941. The author used...

...for the author's CP-based layout. Kitbashing a Gas-electric Railcar Magazine: Railroad Model Craftsman...

...Kurt Mirish Category: Locomotives - Gas Electric Description: Article includes photos and...

...the McCloud River Railroad. Kitbashing a Small Gas Station Magazine: Railroad Model Craftsman...

...Automobiles Description: Adding details to a gas station. Kitbashing a Stock Trailer Magazine:...

...Towns/Cities Description: Using a Bachmann Texaco gas station, the author created a convincing model...

...author created a convincing model of a gas station he passes on his way to...

...Structures - Towns/Cities Description: A neat gas station and repair shop with an upstairs...

...Ken Lawrence Category: Locomotives - Gas Electric Description: The author describes how...

...Chuck Diljak Category: Locomotives - Gas Electric Description: The author describes how...

Magazine Articles for Large Scale Scale
...number of F- and G-scale figures. A Gas Station Diorama Magazine: The Modeler's...

...A 1:32 scale of a small country gas station. A Powell Planer Magazine:...

Magazine Articles for O Scale
...can hold 10 cars. Build a Small Gas Station Magazine: Railroad Model Craftsman...

...Structures - Towns/Cities Description: This small gas station was very common before the era...

...walls, and interior details common for small gas stations. Mike Culham's Great Central Railway Magazine:...

Magazine Articles for On30 Scale
...layout. They include a general store, a gas station, a garage, a fast-food place, and...

Magazine Articles for S Scale
...author built a nice-looking model of a gas/service station. A New Website for the NASG...

...Hobby Supply of Syracuse NY. S Scale Gas Station Kitbash Magazine: Railroad Model...

...Builders' Dill's Market kit to build this gas station. Includes two model photos. S Scale...

Sitemap by Page Titles
... November 14, 2005 - Texaco Gas Station July 25, 2005 Team...

Sitemap by Last-modified Date
...25, 2005 - Structures - Texaco Gas Station July 13, 2005 - Tools...

Structures
... N-scale model, finished by Ria. Texaco Gas Station...

Structures - Texaco Gas Station
Peter's Model Railroading - Structures - Texaco Gas Station Structures - Texaco Gas Station The...

...- Texaco Gas Station Structures - Texaco Gas Station The Texaco Gas Station is a...

...Structures - Texaco Gas Station The Texaco Gas Station is a fully built, detailed, painted,...

gas-electric
Magazine Articles By Dean Freytag
...vehicle used by steel mills. Combine to Gas-electric Magazine: Railroad Model Craftsman 1973-05...

...Scale: HO Description: Dean built gas-electric combine ("Doodlebug") out of a passenger car...

Magazine Articles By Kurt Mirish
... 07/05/2014 Kitbashing a Gas-electric Railcar Magazine: Railroad Model Craftsman...

Magazine Articles By Richard J. Anderson
...railroad converted a baggage car into a gas-electric motor car in 1941. The author used...

Magazine Articles By Category: Locomotives - Gas Electric
... 07/05/2014 Combine to Gas-electric Magazine: Railroad Model Craftsman 1973-05...

...Scale: HO Description: Dean built gas-electric combine ("Doodlebug") out of a passenger car...

...railroad converted a baggage car into a gas-electric motor car in 1941. The author used...

...to create this unique car. Kitbashing a Gas-electric Railcar Magazine: Railroad Model Craftsman...

Railroad Model Craftsman 1973-05 Articles
...and construction and scale drawings. Combine to Gas-electric Page: 29 Author: Dean...

...Scale: HO Description: Dean built gas-electric combine ("Doodlebug") out of a passenger car...

Railroad Model Craftsman 2005-03 Articles
...of these types of equipment. Kitbashing a Gas-electric Railcar Page: 60 Author:...

Railroad Model Craftsman 2006-09 Articles
...railroad converted a baggage car into a gas-electric motor car in 1941. The author used...

Magazine Articles for HO Scale
...large around-the-wall and peninsula design. Combine to Gas-electric Magazine: Railroad Model Craftsman 1973-05...

...- Gas Electric Description: Dean built gas-electric combine ("Doodlebug") out of a passenger car...

...railroad converted a baggage car into a gas-electric motor car in 1941. The author used...

...for the author's CP-based layout. Kitbashing a Gas-electric Railcar Magazine: Railroad Model Craftsman...

gas/service
Magazine Articles By Jerry Schnur
...author built a nice-looking model of a gas/service station. Another Motormax Diorama Conversion Magazine:...

Magazine Articles By Category: Structures - Towns/Cities
...author built a nice-looking model of a gas/service station. A turn-of-the-century bakery Magazine:...

NASG Dispatch 2010-02 Articles
...author built a nice-looking model of a gas/service station. Straight & Narrow Page: 20...

Magazine Articles for S Scale
...author built a nice-looking model of a gas/service station. A New Website for the NASG...

gashes
Team Track Platform
...The ink really accentuates the grooves and gashes I had made earlier. This was a...

gasoline
Magazine Articles By Elmer Cerny
...many scale drawings, including one for the gasoline pumps.

Magazine Articles By Category: Structures - Towns/Cities
...many scale drawings, including one for the gasoline pumps. Urban Renewal - Interchangeable Buildings for...

Model Railroader 1978-03 Articles
...many scale drawings, including one for the gasoline pumps. The Kansas City Southern Lines Page:...

gate
P & C Railroad Version 3 - Progress Report - 2000-12 Report
...table is held upright using a simple gate latching hook. This is the table in...

The PRR Chartiers Branch - Progress Report - 2011-05 Report
...going to build a static, permanently open gate and the remainder of the fence. However,...

...neat idea to build an actual moving gate. The idea being that the property is...

...the short side of the property. The gate took a bit of experimenting to get...

...the Tortoise switch machine that drives the gate to the gate moving in the right...

...machine that drives the gate to the gate moving in the right direction and swing...

...the lateral motion needed to control the gate. I actually had to break off a...

...wire that is the top of the gate is one solid wire that is bent...

...motion of the Tortoise to move the gate the full 90-degrees of its travel. Part...

...YouTube video I posted. I'm switching the gate via the throttle that sends a message...

...this speed is about right for a gate of this size. After rebuilding the earth...

The PRR Chartiers Branch - Progress Report - 2014-06 Report
...the hole, and then glued the crossing gate to the block of wood. A bit...

Railroading Books - Modelling Grassland And Landscape Detailing
...water. Appendix 1 105 Five-bar Gate and Stile Appendix 2 107...

Railroading Books - Realistic Animation, Lighting & Sound
... 20 Build a Slow-motion Crossing Gate Drive A Tortoise controls the gate. 6...

...Crossing Gate Drive A Tortoise controls the gate. 6 22 Build a Three-position...

Magazine Articles By Gordon Odegard
...and construction of the modern-day highway crossing gate. Detailed parts drawing, construction photos, and...

...necessary to have a realistically operating crossing gate. It also covers the gate, LED, and...

...operating crossing gate. It also covers the gate, LED, and bell circuitry, the power supply,...

Magazine Articles By Mark Olstyn
...is a G-shaped design with a swing gate bridge.

Magazine Articles By Category: Layout Design
...is a G-shaped design with a swing gate bridge.

Magazine Articles By Category: Scenery - Trackside
...and construction of the modern-day highway crossing gate. Detailed parts drawing, construction photos, and...

Magazine Articles By Category: Structures - Track-side Details
...necessary to have a realistically operating crossing gate. It also covers the gate, LED, and...

...operating crossing gate. It also covers the gate, LED, and bell circuitry, the power supply,...

Model Railroader 1987-11 Articles
...and construction of the modern-day highway crossing gate. Detailed parts drawing, construction photos, and...

Model Railroader 1987-12 Articles
...necessary to have a realistically operating crossing gate. It also covers the gate, LED, and...

...operating crossing gate. It also covers the gate, LED, and bell circuitry, the power supply,...

Model Railroader 2010-12 Articles
...is a G-shaped design with a swing gate bridge. Update A Common Water Tower Kit...

Magazine Articles for HO Scale
...and construction of the modern-day highway crossing gate. Detailed parts drawing, construction photos, and...

...necessary to have a realistically operating crossing gate. It also covers the gate, LED, and...

...operating crossing gate. It also covers the gate, LED, and bell circuitry, the power supply,...

...is a G-shaped design with a swing gate bridge. Using a Double Slip-Switch, or Read...

Furniture Factory - Diorama
...The last step is to model the gate. I decided to make it easy on...

gated
My Library - Photo Albums - PRR FM Flat Car
...FM (40-foot flat car) parked outside the gated property (little did I know at the...

gates
Product Photos - Gold Medal Models
...chain link fence with barbed wire (no gates), part #160-2. It measures a combined total...

The PRR Chartiers Branch - Progress Report - 2014-06 Report
...me a pair of NJ International crossing gates. I want to fully automate these, but...

...some scenery will hide the block. The gates are permanently in their down position, but...

Railroading Books - Understand Electronics
...and Transistors 9 158 Logic Gates and Boolean Algebra 10 178...

Magazine Articles By Charles Yungkurth
... 07/05/2014 Manual Crossing Gates Magazine: Railroad Model Craftsman 1996-04...

...accompany this article on the manually-operated crossing gates, some of which still exist.

Magazine Articles By Ed Schultz & Brian King
...a working Bachmann crossing signal, including operating gates.

Magazine Articles By Gordon Odegard
... Passenger Cars Safetran Highway Crossing Gates Magazine: Model Railroader 1987-11 Page:...

...description of how the modern-day highway crossing gates work. Includes prototype photos and scale drawings....

...prototype photos and scale drawings. Slow-action Crossing Gates Part 1 Magazine: Model Railroader...

...and wiring diagrams are included. Slow-action Crossing Gates Part 2 Magazine: Model Railroader...

Magazine Articles By John Gerdes
...water-worn rock edges, culverts, farm fences, small gates, and tree stumps. Oiler's Ready-Mix & Building...

Magazine Articles By John Nehrich
...that share a striking resemblance. Simple Crossing Gates Magazine: Model Railroader 1999-11 Page:...

...article discusses how to use N-scale crossing gates in an HO layout. Simplifying Hip Roofs...

Magazine Articles By Category: Electronics
...a working Bachmann crossing signal, including operating gates. Build an Authentic Diesel Horn for Your...

Magazine Articles By Category: Scenery - Trackside
...fences and barbed wire fences. Manual Crossing Gates Magazine: Railroad Model Craftsman 1996-04...

...accompany this article on the manually-operated crossing gates, some of which still exist. Modeling Junk...

...pile, pump-house, and abandoned site. Slow-action Crossing Gates Part 1 Magazine: Model Railroader...

Magazine Articles By Category: Scenery - Trees, Shrubs, Bushes
...water-worn rock edges, culverts, farm fences, small gates, and tree stumps. Pine Tree Art Magazine:...

Magazine Articles By Category: Structures - Track-side Details
...and several layout construction photos. Simple Crossing Gates Magazine: Model Railroader 1999-11 Page:...

...article discusses how to use N-scale crossing gates in an HO layout. Slow-action Crossing Gates...

...gates in an HO layout. Slow-action Crossing Gates Part 2 Magazine: Model Railroader...

Magazine Articles By Category: Track
...how to model them. Safetran Highway Crossing Gates Magazine: Model Railroader 1987-11 Page:...

...description of how the modern-day highway crossing gates work. Includes prototype photos and scale drawings....

Model Railroader 1987-11 Articles
...set in early 1940's. Safetran Highway Crossing Gates Page: 79 Author: Gordon...

...description of how the modern-day highway crossing gates work. Includes prototype photos and scale drawings....

...prototype photos and scale drawings. Slow-action Crossing Gates Part 1 Page: 80 Author:...

Model Railroader 1987-12 Articles
...the Rensselaer Polytechnic club's layout. Slow-action Crossing Gates Part 2 Page: 100 Author:...

Model Railroader 1989-07 Articles
...a working Bachmann crossing signal, including operating gates. Modeling Junk Page: 76 Author:...

Model Railroader 1999-11 Articles
...layout in a suit case. Simple Crossing Gates Page: 117 Author: John...

...article discusses how to use N-scale crossing gates in an HO layout. Buffalo Rock Page:...

N-Scale 2002-07/08 Articles
...water-worn rock edges, culverts, farm fences, small gates, and tree stumps. L&N's H-29 Page:...

Railroad Model Craftsman 1996-04 Articles
...to the RGS in 1950. Manual Crossing Gates Page: 77 Author: Charles...

...accompany this article on the manually-operated crossing gates, some of which still exist. Kitbashing Central...

Magazine Articles for HO Scale
...and several layout construction photos. Simple Crossing Gates Magazine: Model Railroader 1999-11 Page:...

...article discusses how to use N-scale crossing gates in an HO layout. Simplifying Hip Roofs...

...plywood support for a slip-switch. Slow-action Crossing Gates Part 1 Magazine: Model Railroader...

...and wiring diagrams are included. Slow-action Crossing Gates Part 2 Magazine: Model Railroader...

Magazine Articles for N Scale
...a working Bachmann crossing signal, including operating gates. Build an N Scale Chesapeake & Ohio...

...water-worn rock edges, culverts, farm fences, small gates, and tree stumps. Mountain Division Track Height...

gather
Scenery - Generic Foreground Trees
...their dried flowers section). You could also gather these from your backyard, but this saved...

Equipment - PRR RS-1 Road Switcher - Construction: Impressions
...a step-by-step guide. I recommend you gather lots of prototype photos of the engine...

gathered
Equipment - PRR GLa Hopper - Construction: Frame
...these cars at the same time, I gathered six pieces of Evergreen strip styrene that...

Equipment - B&O M53 Box Car - Construction: Underbody
...here's the car on the track. I gathered up all the parts that would eventually...

Equipment - PRR N5c Cabin Car - Construction: Exterior
...bent down at an angle, which I gathered from looking at prototype and other model...

gathering
Hand-building Turnouts - Code 83 S-scale Turnout
...and start to install it. This complex gathering of tools and weights in the photo...

gatorboard
Magazine Articles By Walt Muren
...Category: Modules Description: Using Gatorboard for the module surface and PVC pipe...

Magazine Articles By Category: Modules
... Walt Muren Description: Using Gatorboard for the module surface and PVC pipe...

Railroad Model Craftsman 2010-05 Articles
...Category: Modules Description: Using Gatorboard for the module surface and PVC pipe...

gatwood
Equipment - PRR FM Flat Car - Prototype Information
...Railroad Flat Cars" book written by Elden Gatwood and Al Buchanan, which contains a lot...

Equipment - PRR RS-1 Road Switcher - Construction: Conclusion
...to Bill Daniels, Christopher Chany, and Elden Gatwood for the information about the hand brake...

Railroading Books - Pennsylvania Railroad Flat Cars
... 01/27/2014 Authors : Elden Gatwood & Dave Frary Publisher : PRRT&HS Published...

Magazine Articles By Author
...Edwin Schampel - 1 articles Elden Gatwood - 13 articles Elmer Cerny...

Magazine Articles By Elden Gatwood
My Library - Magazine Articles By Elden Gatwood My Library - Magazine Articles By Elden...

...My Library - Magazine Articles By Elden Gatwood 07/05/2014 Class...

Magazine Articles By Category: Freight Cars - Boxcars
...Page: 9 Author: Elden Gatwood Scale: HO Description: This installment...

...Page: 6 Author: Elden Gatwood Scale: HO Description: Discusses the...

Magazine Articles By Category: Freight Cars - Flat Cars
...Page: 16 Author: Elden Gatwood Description: This installment covers the F31...

Magazine Articles By Category: Freight Cars - Gondolas
...06 January 2004 Author: Elden Gatwood Description: Follow-up article showing some of...

...Page: 5 Author: Elden Gatwood Description: This introductory installment of the...

...03 October 2003 Author: Elden Gatwood Scale: HO Description: This installment...

...04 November 2003 Author: Elden Gatwood Scale: HO Description: This installment...

...06 January 2004 Author: Elden Gatwood Scale: HO Description: This installment...

...Page: 29 Author: Elden Gatwood Scale: HO Description: This installment...

...Page: 9 Author: Elden Gatwood Description: A tabular listing of all...

...04 November 2003 Author: Elden Gatwood Scale: HO Description: Making our...

...06 January 2004 Author: Elden Gatwood Description: How to model a car...

Magazine Articles By Category: Model Railroads and People
...Page: 6 Author: Elden Gatwood Description: Photos of several contest and...

The Keystone Modeler 02 September 2003 Articles
...Page: 5 Author: Elden Gatwood Category: Freight Cars - Gondolas...

...Page: 9 Author: Elden Gatwood Category: Freight Cars - Gondolas...

The Keystone Modeler 03 October 2003 Articles
...Fleet Part 2 Author: Elden Gatwood Category: Freight Cars - Gondolas...

The Keystone Modeler 04 November 2003 Articles
...Fleet Part 3 Author: Elden Gatwood Category: Freight Cars - Gondolas...

...Cars Part 1 Author: Elden Gatwood Category: Freight Cars - Gondolas...

The Keystone Modeler 06 January 2004 Articles
...Class GS Supplement Author: Elden Gatwood Category: Freight Cars - Gondolas...

...Fleet Part 4 Author: Elden Gatwood Category: Freight Cars - Gondolas...

...Car of Offal Author: Elden Gatwood Category: Freight Cars - Gondolas...

The Keystone Modeler 07 February 2004 Articles
...Page: 29 Author: Elden Gatwood Category: Freight Cars - Gondolas...

The Keystone Modeler 39 October 2006 Articles
...Page: 16 Author: Elden Gatwood Category: Freight Cars - Flat...

The Keystone Modeler 60 July 2008 Articles
...Page: 6 Author: Elden Gatwood Category: Model Railroads and People...

The Keystone Modeler 61 August 2008 Articles
...Page: 9 Author: Elden Gatwood Category: Freight Cars - Boxcars...

The Keystone Modeler 62 September 2008 Articles
...Page: 6 Author: Elden Gatwood Category: Freight Cars - Boxcars...

Magazine Articles for HO Scale
...Page: 9 Author: Elden Gatwood Category: Freight Cars - Boxcars...

...Page: 6 Author: Elden Gatwood Category: Freight Cars - Boxcars...

...03 October 2003 Author: Elden Gatwood Category: Freight Cars - Gondolas...

...04 November 2003 Author: Elden Gatwood Category: Freight Cars - Gondolas...

...06 January 2004 Author: Elden Gatwood Category: Freight Cars - Gondolas...

...Page: 29 Author: Elden Gatwood Category: Freight Cars - Gondolas...

...04 November 2003 Author: Elden Gatwood Category: Freight Cars - Gondolas...

gatx
Magazine Articles By Allan N. Houghton
... 07/05/2014 Modeling a GATX Leasing MP15 in HO Scale Magazine:...

...them, without actually having to buy it. GATX (General American Transportation Corp) leases equipment to...

Magazine Articles By Category: Locomotives - Diesel
...photos, and a parts list. Modeling a GATX Leasing MP15 in HO Scale Magazine:...

...them, without actually having to buy it. GATX (General American Transportation Corp) leases equipment to...

Model Railroader 1992-05 Articles
...bulbs, LED's, and neon lights. Modeling a GATX Leasing MP15 in HO Scale Page:...

...them, without actually having to buy it. GATX (General American Transportation Corp) leases equipment to...

Magazine Articles for HO Scale
...load made by Chooch Enterprises. Modeling a GATX Leasing MP15 in HO Scale Magazine:...

...them, without actually having to buy it. GATX (General American Transportation Corp) leases equipment to...

gauge
Future Layout - Givens
...railroads, nor any real interest in narrow gauge (other than for a possible source of...

Hand-laying Track - 5. Laying Rail
...use is to use the NASG track gauge centered over the ties so that the...

...rail spacings, according to the NASG Standards Gauge. They snap on to the rail head...

Hand-building Turnouts - Code 40 N-scale Turnout
...(typically the curved one), using the NMRA gauge off of the point rail. This rail...

Hand-building Turnouts - Code 55 N-scale Turnout
...ties down now, making any adjustments in gauge later on will be next to impossible....

...If your rolling stocks' wheels are in gauge, this is the best way to protect...

...so even though the track is in gauge when you solder it, typically afterwards it...

Hand-building Turnouts - Code 83 S-scale Turnout
...a wheel is this far out of gauge, you're going to have other problems. :-)...

...hit. On some it actually narrowed the gauge too much to cause the wheels to...

Product Photos - M.T.H.
...part #30-11043. These are flagged as "O" gauge, but they are perfect for S-scale. This...

Chartiers Branch - General Information
...& Washington RR, which was a narrow gauge line until 1944 when it was upgraded...

...1944 when it was upgraded to standard gauge. It then became the "Waynesburg Secondary", which...

...Waynesburg & Washington RR converted from narrow gauge to standard (at Washington station). 1948...

General Rolling Stock
... 04/21/2012 Modeling less-than-carload containers. Coupler Gauge 11/03/2008 How I built...

...11/03/2008 How I built a coupler gauge. Dragline Buckets Load 08/27/2013...

General Rolling Stock - Coupler Gauge
...Railroading - General Rolling Stock - Coupler Gauge General Rolling Stock - Coupler Gauge...

...Coupler Gauge General Rolling Stock - Coupler Gauge 11/03/2008 This...

...under an hour. I used the NMRA gauge to determine the spacing between the two...

...be riding on the styrene surface, so gauge is important. A couple of metal weights...

...that I superglued the Micro-Trains coupler height gauge on the jig. The right side of...

...the jig. The right side of the gauge has an N-scale coupler to verify coupler...

...height, and the left side of the gauge has a surface that allows us to...

...checks on the workbench. I superglued the gauge to the jig, because I have no...

...I have no other use for the gauge. I also seemed to misplace it from...

...much easier to find! I located the gauge such that there was 9-1/2 inches of...

...of space to the right of the gauge on the jig. This is the length...

...5 inches to the left of the gauge, which is enough for passenger cars. This...

...rails on the layout, so that wheel gauge can be checked quickly. The next step...

...People typically use the Kadee coupler height gauge for this check. That works fine, but...

...the correct height? The Kadee coupler height gauge also checks for that. But rather than...

N-scale Equipment - Bowser Hoppers - Coupler Conversion
...as compared to the Micro-Trains coupler height gauge. This photo shows a close-up of the...

N-scale Equipment - Con-Cor 4-8-4 - Mechanical Problems
...truck of the tender are not in gauge. The rest of the wheels are.

N-scale Equipment - Kato 2-8-2 - Coupler Conversion
...tender frame's rail height against the Micro-Trains gauge to make sure that the coupler will...

N-scale Equipment - Kato Passenger Cars - Coupler Conversion
...am at it, I also check the gauge of the wheels, hence the gauge checker...

...the gauge of the wheels, hence the gauge checker tool in the photo. Because the...

...body of the car. Use the Micro-Trains gauge and test fit to see if the...

N-scale Equipment - Life-Like SW9 - Adjusting Wheels
...and measured the wheels against an NMRA gauge. I discovered that the wheels were a...

N-scale Equipment - Model Power 4-6-2 - Coupler Conversion
...positioned correctly. Next, off to the height gauge we go! The tender's frame sits a...

...a perfect match with the Micro-Trains coupler gauge. I am happy with the conversion, because...

Scenery - Generic Background Trees
...Lobby, hobby shops) I bought 26 gauge floral wire at Hobby Lobby. The skinnier...

Scenery - Stranded Wire Trees
...floral depart). This particular spool is 26 gauge wire, which I bought at Hobby Lobby....

Model Railroading Scales
... Uses G-scale track as 3-foot narrow gauge track. 1:22.5...

... 1:22.5 G-scale European meter gauge Uses G-scale track, where track spacing...

... Uses G-scale track. Compromised narrow gauge. 1:29 Common...

... Uses G-scale track as scale standard-gauge track at a slight compromise....

... 1:32 G-scale/One Gauge Uses G-scale track....

Tools - Panel Cutting Sled
...the glider that runs in the miter gauge slot of the table saw. First, I...

...distance from the blade to the miter gauge slot on the table saw. I added...

Tools - Small Tools
...shortly after first serious use. The miter gauge is flimsy, and therefore not reliable. If...

Custom Track Solutions - Helix
...plywood. Later on I will have heavier gauge power wires run down each of the...

Equipment - PRR FM Flat Car - Coupler Conversion
...quick check on my coupler height gauge verified that it is installed at...

Equipment - PRR FM Flat Car - Construction: Wheels and Couplers
...on purpose. I used my Coupler Gauge to mark off the amount of...

Equipment - PRR G24 Gondola - Model Information
...a NMRA-compliance warrant due to the wheel gauge being too narrow (easily fixed), and it...

Equipment - PRR GLd Hopper - Coupler Conversion
...in place. I verified with my Coupler Gauge jig that the shim was indeed needed....

Equipment - B&O M55 Box Car - Coupler Conversion
...MTH truck screw. Using my coupler height gauge, I verified that the car is exactly...

Equipment - PRR N5c Cabin Car - Construction: Wheels and Couplers
...photo showing the car on my coupler gauge jig. The top of the coupler is...

Equipment - PRR NW2 Switcher - ProtoMax Couplers
...set the engine on my coupler gauge jig , I discovered the couplers were...

...the difference between the tops of the gauge and coupler. I painted the shim with...

Equipment - PRR RS-1 Road Switcher - Construction: Adding Details
...contact surfaces. I found that a track gauge on top of the air intake louvers...

Crystal Creek Module - Progress Report - 2005-06 Report
...spikes). The photo shows my home-made rail gauge blocks upon which I could place the...

...metal weights to hold the track in gauge and down while the glue sets. Rail...

The PRR Chartiers Branch - Progress Report - 2013-04 Report
...that the rails are at the proper gauge. I started spiking the rail, but soon...

Railroading Books - Great Model Railroads 1992
...too. He models both standard and narrow gauge on his 1940's to 50's SP-based layout....

Railroading Books - Great Model Railroads 1995
...layout by the editor of the Narrow Gauge Gazette. The layout measures 19' x 21'....

Railroading Books - Great Model Railroads 2001
...& Western This Nn3 layout features narrow gauge railroading set in at the turn of...

Railroading Books - Great Model Railroads 2003

Railroading Books - Great Model Railroads 2014
...built in 2007 for the National Narrow Gauge Convention held in Portland, Maine that year....

Railroading Books - Maintaining & Repairing Your Scale Model Trains
...together, how to bring wheels back into gauge, how to upgrade and check couplers, how...

...wheels, how to bring wheels back into gauge, how to upgrade and check couplers, how...

...car, how to bring wheels back into gauge, how to upgrade snap-on type trucks, how...

Railroading Books - Steam Locomotives Cyclopedia Volume 1
...Harriman 2-8-0 52 SP 2-8-0 Narrow Gauge 53 IC 2-8-0 54 PRR...

...H10, H10a, H10b 80 D&RGW Narrow Gauge 2-8-2 Class K28 81 GN 2-8-2...

...4-4-0 Baldwin 106 Mt. Gretna Narrow Gauge 4-4-0 106 PRR 4-4-0 Class D16...

Railroading Books - Trackwork and Lineside Detail
...as making sure the track is in gauge, turnouts are smooth, wheels are in gauge,...

...gauge, turnouts are smooth, wheels are in gauge, and use of good couplers. 4...

Magazine Articles By Al Askerberg
...Thurteah & Weystead Magazine: Narrow Gauge And Short Line Gazette 2007-01/02 Page:...

Magazine Articles By Alan Mende
...to Boone Morrison's article in the Narrow Gauge and Short Line Gazette's November/December 1997 issue....

Magazine Articles By Albert J. Rost
... 07/05/2014 Kitbashing Narrow Gauge Hopper Cars Magazine: Railroad Model...

...models using the Tichy Train Group's standard gauge hoppers.

Magazine Articles By Allen J. Brewster
... Locomotives - Steam Description: The 2-foot-gauge railroad received a 2-4-4-T (a modified Forney)....

...scale drawings. Denver & Rio Grande Western's Narrow-gauge Gondolas Magazine: Model Railroader 1978-08...

...Sunset Models Pacific Coast Shay, a standard gauge engine. The article contains prototype photos, completed...

Magazine Articles By Allen K. Littlefield
...On30 Rail Truck Magazine: Narrow Gauge And Short Line Gazette 2008-09/10 Page:...

Magazine Articles By Bill Fraley
...is a member of the Bristol S Gauge Club. Meet an S Gauger Magazine:...

Magazine Articles By Bob Bennett
...vehicle used by a fire department. Narrow Gauge Snowplow Magazine: Railroad Model Craftsman...

Magazine Articles By Bob Brown
...Trailer to On3 Magazine: Narrow Gauge And Short Line Gazette 2008-09/10 Page:...

...by John Olson Magazine: Narrow Gauge And Short Line Gazette 2007-01/02 Page:...

...layouts. Robert's Ramblings Magazine: Narrow Gauge And Short Line Gazette 2007-01/02 Page:...

...the smaller scales. The Tuolomne Country Narrow Gauge Garden Railroad Magazine: Garden Railways...

...in the 1920-30 period modeling 1:20.3 narrow gauge. Bob is the editor of the Narrow...

...Bob is the editor of the Narrow Gauge and Short Line Gazette.

Magazine Articles By Bob Kuchar
... 07/05/2014 Narrow Gauge Through the San Juan Mountains Magazine:...

Magazine Articles By Bob Poli
...Scale Tank Cars Magazine: Narrow Gauge And Short Line Gazette 2007-01/02 Page:...

Magazine Articles By Bobber Gibbs
...Scale: O Description: Why narrow gauge? O-scale narrow gauge is more fun and...

...Description: Why narrow gauge? O-scale narrow gauge is more fun and allows for more...

Magazine Articles By Boone Morrison
...to the Redwoods Magazine: Narrow Gauge And Short Line Gazette 2007-01/02 Page:...

...Redwoods Part 70 Magazine: Narrow Gauge And Short Line Gazette 2008-09/10 Page:...

...Redwoods Part 71 Magazine: Narrow Gauge And Short Line Gazette 2008-11/12 Page:...

Magazine Articles By Brooks Stover
... A beautiful rendition of the standard gauge shortline in West Virginia. It still used...

Magazine Articles By Bryan Nolan
...& Timber Company Magazine: Narrow Gauge And Short Line Gazette 2007-01/02 Page:...

Magazine Articles By Charlie Getz
... 07/05/2014 The Narrow Gauge Scene Magazine: Narrow Gauge And...

...Narrow Gauge Scene Magazine: Narrow Gauge And Short Line Gazette 2008-09/10 Page:...

...and reflects on past works. The Narrow Gauge Scene Magazine: Narrow Gauge And...

...Narrow Gauge Scene Magazine: Narrow Gauge And Short Line Gazette 2007-01/02 Page:...

Magazine Articles By Christopher P. D'Amato
...the control panel. Canadian National Rwy. 42" Gauge Wooden Van Magazine: Railroad Model...

Magazine Articles By Christopher Payne
...07/05/2014 Sutton Wharf Magazine: Narrow Gauge And Short Line Gazette 2007-01/02 Page:...

...A 5' by 1' imaginary English 18-inch gauge industrial railway diorama in 1:25 scale. Includes...

Magazine Articles By Cody Grivno
...of the various cars. An Expanding Narrow Gauge Empire Magazine: Model Railroader 2006-01...

...On3 Description: The Cascade County Narrow Gauge layout measures 26 x 31 feet, is...

Magazine Articles By David Heine
...David describes attending the 2010 National Narrow Gauge Convention in St. Louis, Missouri. Includes photos...

...brief review of the 2009 National Narrow Gauge Convention in Colorado Springs, CO. The Straight...

...one might want to model in narrow gauge. The Straight & Narrow Magazine:...

...article chronicles the history of U.S. narrow gauge railroading.

Magazine Articles By David L. Heine
...of some of the narrow and standard gauge layouts that were open during the show...

Magazine Articles By David Steer
...the RGS in 1950. The DL535E: Narrow Gauge Diesel of the North Magazine:...

...Alco-designed locomotives were built for the three-foot gauge of the White Pass & Yukon. The...

Magazine Articles By Dennis Ferguson
...Southern Sophir District Magazine: Narrow Gauge And Short Line Gazette 2008-11/12 Page:...

Magazine Articles By Don Fiehmann
...This article covers using the NMRA standards gauge to check your rolling stock's wheels, verifying...

Magazine Articles By Don Mitchell
...19 feet, double-level layout models a narrow gauge line from Colorado to California. It is...

Magazine Articles By Doug Geiger
...control, scenery design, and the added narrow gauge line.

Magazine Articles By Doug Leffler
...to build this simple structure. Freelanced Narrow Gauge Flatcar Magazine: Railroad Model Craftsman...

...strip wood, the author built this narrow gauge flat car. With some adjustment, this car...

...could also be built to fit standard gauge.

Magazine Articles By Doug Taylor & Stephen M. Priest
...in Pennsylvania, with connections to the standard gauge PRR. The layout was started in 1978...

Magazine Articles By Edward H. Cass
... 07/05/2014 3-foot Gauge Huckleberry Railroad #11 Magazine: Narrow...

...Huckleberry Railroad #11 Magazine: Narrow Gauge And Short Line Gazette 2008-11/12 Page:...

...photo. Oahu Railway & Land Company 3-foot Gauge Plymouth Diesel #45 Magazine: Narrow...

...Plymouth Diesel #45 Magazine: Narrow Gauge And Short Line Gazette 2008-09/10 Page:...

...in 1947. Ohio River & Western 3-foot Gauge Gondola #279 Magazine: Narrow Gauge...

...Gauge Gondola #279 Magazine: Narrow Gauge And Short Line Gazette 2007-01/02 Page:...

Magazine Articles By Eric Bracher
...Western Spreader OU Magazine: Narrow Gauge And Short Line Gazette 2008-11/12 Page:...

Magazine Articles By Gary Carmichael
...Crew's attendance of the 2012 National Narrow Gauge Convention in Randolph, Maine. It includes a...

Magazine Articles By Gary Caviglia
...Pacific Coast Railroad Magazine: Narrow Gauge And Short Line Gazette 2008-11/12 Page:...

...Coast Railroad #13 Magazine: Narrow Gauge And Short Line Gazette 2007-01/02 Page:...

...Railroad Passenger Shelter Magazine: Narrow Gauge And Short Line Gazette 2008-09/10 Page:...

...Works Freight Station Magazine: Narrow Gauge And Short Line Gazette 2008-09/10 Page:...

Magazine Articles By Gary Wright
...to get rid of his award-winning 1:32n20 gauge passenger car, so he converted it to...

Magazine Articles By George Hall
...describes Richard Miller's O-scale standard and narrow gauge Denver & Rio Grand Western. Includes a...

...Jack's backyard. It models the California narrow gauge set in the 1930's. Although he started...

Magazine Articles By George Konrad
...07/05/2014 Mack Trucks Magazine: Narrow Gauge And Short Line Gazette 2008-11/12 Page:...

Magazine Articles By George Pierson
... 07/05/2014 Modeling Eastern Narrow Gauge Steam Using the Roundhouse 2-8-0 Magazine:...

...this locomotive to work reliably on narrow gauge track. He also briefly discusses the 4-6-0...

Magazine Articles By George Sebastian-Coleman
...how to model these in HO. Narrow Gauge in a Garage Part 1 Magazine:...

...adding DCC to an On2-1/2 Porter. Narrow Gauge in a Garage Part 2 Magazine:...

...shelves upon which the layout rests. Narrow Gauge in a Garage Part 3 Magazine:...

... Track Description: Definitions of narrow gauge railroading. Using Rock Molds Magazine:...

Magazine Articles By Hal Barwood
... 07/05/2014 Model Railroading in Binary Gauge Magazine: Model Railroader 1984-12 Page:...

Magazine Articles By Harry W. Brunk
...Black Hawk Warehouse Magazine: Narrow Gauge And Short Line Gazette 2008-09/10 Page:...

...Brickwork at Georgetown Magazine: Narrow Gauge And Short Line Gazette 2008-11/12 Page:...

Magazine Articles By Herb King
... 07/05/2014 S Gauge One Evening Project Magazine: NASG...

Magazine Articles By Herbert Koenig
... 07/05/2014 Narrow Gauge Track Cleaner Magazine: Railroad Model...

...describe how the wheels were adjusted to gauge, how the trucks were modified, and how...

Magazine Articles By Iain Rice
... O Description: Includes prototype narrow gauge photo from 1909. Roque Bluffs Lightweight Benchwork...

Magazine Articles By Irene Brown
...The "Cenote Railway" Magazine: Narrow Gauge And Short Line Gazette 2008-09/10 Page:...

...Description: Thousands of miles of narrow gauge track was once built in Yucatan to...

Magazine Articles By J.R. Dunlop
... 07/05/2014 2-foot Gauge Bridgton & Harrison Railroad Boxcar #56 Magazine:...

...Railroad Boxcar #56 Magazine: Narrow Gauge And Short Line Gazette 2007-01/02 Page:...

Magazine Articles By Jack Burgess
...Derrick at Incline Magazine: Narrow Gauge And Short Line Gazette 2008-11/12 Page:...

Magazine Articles By James Scott Eakins
... 07/05/2014 Consider Narrow Gauge Magazine: Model Railroader 1978-08 Page:...

...HOn3 Description: The author describes narrow gauge modeling and compares it to standard gauge...

...gauge modeling and compares it to standard gauge modeling.

Magazine Articles By Jeff Madden
...able to compete with the other narrow gauge scales? The author describes what happened with...

Magazine Articles By Jeff Scherb
...Himalayan Railway #777 Magazine: Narrow Gauge And Short Line Gazette 2007-01/02 Page:...

...Steam Description: This is a 2-foot Gauge 0-4-0T engine that ran the very steep...

...Buzzard Light Railway Magazine: Narrow Gauge And Short Line Gazette 2008-11/12 Page:...

Magazine Articles By Jerry L. Martin
...Co. Engine House Magazine: Narrow Gauge And Short Line Gazette 2008-11/12 Page:...

...with it at the 28th National Narrow Gauge Convention.

Magazine Articles By Jim Auman
... 07/05/2014 A Standard Gauge Forney Magazine: Railroad Model Craftsman...

Magazine Articles By Jim Gore
...From Balsa Wood Magazine: Narrow Gauge And Short Line Gazette 2008-11/12 Page:...

Magazine Articles By Jim Vail
...McHugh and Bianchi Magazine: Narrow Gauge And Short Line Gazette 2008-09/10 Page:...

...and Slash Burner Magazine: Narrow Gauge And Short Line Gazette 2007-01/02 Page:...

...Westside Model Company Magazine: Narrow Gauge And Short Line Gazette 2008-11/12 Page:...

Magazine Articles By Joe Luber
...brass Shays in HO narrow and standard gauge with photographic studies of typical representatives of...

Magazine Articles By John K. Landis
...a Small Space Magazine: Narrow Gauge And Short Line Gazette 2008-09/10 Page:...

Magazine Articles By John Morrison
...#4 and #5 Magazine: Narrow Gauge And Short Line Gazette 2008-09/10 Page:...

...article on the author's scratchbuilt, 1:24, 45mm gauge "Colonial Engines". These are engines designed for...

Magazine Articles By John S. Midgley
...Old Mormon Trail" Magazine: Narrow Gauge And Short Line Gazette 2008-09/10 Page:...

...Station, Elberta, Utah Magazine: Narrow Gauge And Short Line Gazette 2008-11/12 Page:...

Magazine Articles By Ken Lunders
...Turntable in HOn30 Magazine: Narrow Gauge And Short Line Gazette 2007-01/02 Page:...

...author describes how he scratchbuilt this 2-foot gauge, short turntable. It includes prototype photos, scale...

Magazine Articles By Kenneth Ehlers
... 07/05/2014 Rocky Mountain Narrow Gauge Magazine: Model Railroader 2002-10 Page:...

Magazine Articles By Lee Vande Visse
...Flat Cars Description: Taking a standard gauge car, the author modeled a narrow gauge...

...gauge car, the author modeled a narrow gauge one. However, most of the article appears...

Magazine Articles By Linn Moedinger
...features two of the owner's favorite narrow gauge lines set in 1957. Includes a trackplan...

Magazine Articles By Lou Sassi
...perimeter of the layout and the narrow gauge EBT in the center island. Includes a...

Magazine Articles By Malcolm Furlow
...freelanced model based on the American narrow gauge prototype. Harry Clark's Indian Creek Valley Ry....

Magazine Articles By Mallory Hope Ferrell
... 07/05/2014 Along the Narrow Gauge Magazine: Narrow Gauge And Short...

...the Narrow Gauge Magazine: Narrow Gauge And Short Line Gazette 2007-01/02 Page:...

...combine. Includes model and prototype photos. Thirty-inch Gauge Railroads Magazine: Narrow Gauge And...

...Thirty-inch Gauge Railroads Magazine: Narrow Gauge And Short Line Gazette 2008-11/12 Page:...

...railroads covered in this twenty-on-article series. Thirty-inch Gauge Railroads Hawaiian Plantation Lines Part 4 Magazine:...

...Lines Part 4 Magazine: Narrow Gauge And Short Line Gazette 2008-09/10 Page:...

...Day bought the equipment of the 30-inch gauge Hawaiian line and brought it to California...

Magazine Articles By Marc Horovitz
...twist - using small scale live steam. Gauge 1 refers more to the track width...

Magazine Articles By Paul Scoles
...this layout. Several close-up photos are included. Narrow-gauge Rotary Magazine: Railroad Model Craftsman...

...22' by 46' basement, and this narrow gauge line is set in 1895 in California....

Magazine Articles By Pete Moffett
...to build a model of a narrow gauge track scale. Includes how to glue down...

...track using Walthers Goo. Steel City N Gauge Model Railway Club Magazine: N-Scale...

Magazine Articles By Ralph Dockham
...Using European HOn30 arch bars for two-foot gauge lines of Maine.

Magazine Articles By Raymond Hoppes
... HO Description: Using a standard gauge Kato NW2, the author shows how he...

...how he kitbashed it into this narrow gauge engine. Includes construction photos and one prototype...

Magazine Articles By Rich Nealson
...mysterious history of this Nevada County Narrow Gauge RR boxcar revealed by newly discovered photos....

Magazine Articles By Robert D. Bailey
...07/05/2014 Alvard's Landing Magazine: Narrow Gauge And Short Line Gazette 2007-01/02 Page:...

...Landing Part 3 Magazine: Narrow Gauge And Short Line Gazette 2008-11/12 Page:...

...Landing Freight Depot Magazine: Narrow Gauge And Short Line Gazette 2008-09/10 Page:...

Magazine Articles By Robert Susanka
...Rio Grande Lande Magazine: Narrow Gauge And Short Line Gazette 2007-01/02 Page:...

Magazine Articles By Robert Whetham
...CP Rail's Kimberley Subdivision and Its Narrow Gauge Connection Magazine: Railroad Model Craftsman...

Magazine Articles By Rudy Kouhoupt
...HO scale and one in 3/8" scale, Gauge 1. Includes a bit of history, model...

Magazine Articles By Russ Watson
...the Jan/Feb, 1990 issue of the Narrow Gauge and Shortline Gazette. Although freelanced, it is...

Magazine Articles By Steve Harris
...Junction in HOn3 Magazine: Narrow Gauge And Short Line Gazette 2008-09/10 Page:...

Magazine Articles By Steven Brewster
... 07/05/2014 Narrow Gauge Pullman Sleeper Magazine: Model Railroader...

... Passenger Cars Description: Three-foot gauge sleeping cars of the D&RGW. Prototype photos...

Magazine Articles By Terence F. Harper
... 07/05/2014 A Standard Gauge Baldwin Locomotive Works Geared Locomotive Magazine:...

...Works Geared Locomotive Magazine: Narrow Gauge And Short Line Gazette 2008-11/12 Page:...

Magazine Articles By Tom Houle
...this old tank car. Scratchbuilding C&NW Narrow Gauge Boxcar No. 10 Magazine: Railroad...

Magazine Articles By Tom O'Neil
...drawing accompany this article about these narrow gauge hopper cars.

Magazine Articles By Trevor Marshall
...a watering crane used on the two-foot gauge Sandy River & Rangeley Lakes in Kingsfield,...

... Prototype description of the 2-foot Maine gauge line. Includes diagram for possible track design....

Magazine Articles By Vincent Pellitteri
...Description: The author used a standard gauge B.T.S. 2-8-0 kit to build the model...

...the model he needed for his standard gauge interchange.

Magazine Articles By Volker Gerisch
... 07/05/2014 The Plettenberg Narrow Gauge Light Railway Magazine: The Modeler's...

...of a portion of the Plettenberg narrow gauge line that ran through the streets. The...

...streets. The scale was chosen so that Gauge One track was a perfect match for...

Magazine Articles By William T. Greenberg, Jr.
...the area. Hampton, NJ: The CNJ's Dual Gauge Railroad Junction Magazine: Railroad Model...

Magazine Articles By Category: Automobiles
...list. Mack Trucks Magazine: Narrow Gauge And Short Line Gazette 2008-11/12 Page:...

Magazine Articles By Category: Cabooses
...from a boxcar. Canadian National Rwy. 42" Gauge Wooden Van Magazine: Railroad Model...

Magazine Articles By Category: Dioramas
...scale. Sutton Wharf Magazine: Narrow Gauge And Short Line Gazette 2007-01/02 Page:...

...A 5' by 1' imaginary English 18-inch gauge industrial railway diorama in 1:25 scale. Includes...

...trackplan and close-up photos. The Plettenberg Narrow Gauge Light Railway Magazine: The Modeler's...

...of a portion of the Plettenberg narrow gauge line that ran through the streets. The...

...streets. The scale was chosen so that Gauge One track was a perfect match for...

Magazine Articles By Category: Electronics
...to track cars on your layout. S Gauge One Evening Project Magazine: NASG...

Magazine Articles By Category: Freight Cars
...Using European HOn30 arch bars for two-foot gauge lines of Maine. Keeping HOn3 Springs Intact...

...This article covers using the NMRA standards gauge to check your rolling stock's wheels, verifying...

Magazine Articles By Category: Freight Cars - Boxcars
...car's decals using WordPerfect for DOS. 2-foot Gauge Bridgton & Harrison Railroad Boxcar #56 Magazine:...

...Railroad Boxcar #56 Magazine: Narrow Gauge And Short Line Gazette 2007-01/02 Page:...

...mysterious history of this Nevada County Narrow Gauge RR boxcar revealed by newly discovered photos....

...one of these models. Scratchbuilding C&NW Narrow Gauge Boxcar No. 10 Magazine: Railroad...

Magazine Articles By Category: Freight Cars - Flat Cars
...Vande Visse Description: Taking a standard gauge car, the author modeled a narrow gauge...

...gauge car, the author modeled a narrow gauge one. However, most of the article appears...

...GHQ depressed center flat car. Freelanced Narrow Gauge Flatcar Magazine: Railroad Model Craftsman...

...strip wood, the author built this narrow gauge flat car. With some adjustment, this car...

...could also be built to fit standard gauge. Heavy Loads CEBX 8OO Magazine:...

Magazine Articles By Category: Freight Cars - Gondolas
...G22 gondola. Denver & Rio Grande Western's Narrow-gauge Gondolas Magazine: Model Railroader 1978-08...

...model photos. Ohio River & Western 3-foot Gauge Gondola #279 Magazine: Narrow Gauge...

...Gauge Gondola #279 Magazine: Narrow Gauge And Short Line Gazette 2007-01/02 Page:...

Magazine Articles By Category: Freight Cars - Hoppers
...drawing accompany this article about these narrow gauge hopper cars. GN Bethlehem Hopper Magazine:...

...cutting diagrams and materials list. Kitbashing Narrow Gauge Hopper Cars Magazine: Railroad Model...

...models using the Tichy Train Group's standard gauge hoppers. Mini-Quad Couplers Magazine: N-Scale...

Magazine Articles By Category: Freight Cars - Stock Cars
...HO scale and one in 3/8" scale, Gauge 1. Includes a bit of history, model...

Magazine Articles By Category: Freight Cars - Tank Cars
...Scale Tank Cars Magazine: Narrow Gauge And Short Line Gazette 2007-01/02 Page:...

...scale drawings accompany this article about the 2-foot-gauge tank car. Build a 1915 Pennzoil Tank...

Magazine Articles By Category: Garden Railroading
...Jack's backyard. It models the California narrow gauge set in the 1930's. Although he started...

Magazine Articles By Category: Layout Construction
...Junction in HOn3 Magazine: Narrow Gauge And Short Line Gazette 2008-09/10 Page:...

...of plywood using the slot method. Narrow Gauge in a Garage Part 1 Magazine:...

...adding DCC to an On2-1/2 Porter. Narrow Gauge in a Garage Part 2 Magazine:...

...shelves upon which the layout rests. Narrow Gauge in a Garage Part 3 Magazine:...

...to the Redwoods Magazine: Narrow Gauge And Short Line Gazette 2007-01/02 Page:...

...accessories and how to model in narrow gauge. Transfer Table Magazine: N-Scale 2003-07/08...

Magazine Articles By Category: Layout Design
... O Description: Includes prototype narrow gauge photo from 1909. How to Plan Your...

Magazine Articles By Category: Layouts
...of this freelanced layout. An Expanding Narrow Gauge Empire Magazine: Model Railroader 2006-01...

...On3 Description: The Cascade County Narrow Gauge layout measures 26 x 31 feet, is...

...large lumber company, and other industries. Narrow Gauge Through the San Juan Mountains Magazine:...

...Norfolk & Western Railway. Rocky Mountain Narrow Gauge Magazine: Model Railroader 2002-10 Page:...

...in a real-world boxcar. Steel City N Gauge Model Railway Club Magazine: N-Scale...

Magazine Articles By Category: Layouts - G
...for night-time operations. The Tuolomne Country Narrow Gauge Garden Railroad Magazine: Garden Railways...

...in the 1920-30 period modeling 1:20.3 narrow gauge. Bob is the editor of the Narrow...

...Bob is the editor of the Narrow Gauge and Short Line Gazette. The Woodland Railway...

Magazine Articles By Category: Layouts - HO - Large
...features two of the owner's favorite narrow gauge lines set in 1957. Includes a trackplan...

...control, scenery design, and the added narrow gauge line. The Kansas City Southern Lines Magazine:...

...perimeter of the layout and the narrow gauge EBT in the center island. Includes a...

Magazine Articles By Category: Layouts - HO - Medium
...freelanced model based on the American narrow gauge prototype. George Lochsky's Northern Pacific Layout Magazine:...

...in Pennsylvania, with connections to the standard gauge PRR. The layout was started in 1978...

Magazine Articles By Category: Layouts - HO - Small
...Rio Grande Lande Magazine: Narrow Gauge And Short Line Gazette 2007-01/02 Page:...

Magazine Articles By Category: Layouts - Large Scale
...a Small Space Magazine: Narrow Gauge And Short Line Gazette 2008-09/10 Page:...

Magazine Articles By Category: Layouts - O
...describes Richard Miller's O-scale standard and narrow gauge Denver & Rio Grand Western. Includes a...

...Southern Sophir District Magazine: Narrow Gauge And Short Line Gazette 2008-11/12 Page:...

...19 feet, double-level layout models a narrow gauge line from Colorado to California. It is...

Magazine Articles By Category: Layouts - S
... A beautiful rendition of the standard gauge shortline in West Virginia. It still used...

...22' by 46' basement, and this narrow gauge line is set in 1895 in California....

Magazine Articles By Category: Live Steam
...included. Robert's Ramblings Magazine: Narrow Gauge And Short Line Gazette 2007-01/02 Page:...

...twist - using small scale live steam. Gauge 1 refers more to the track width...

Magazine Articles By Category: Locomotives - Diesel
...friendly locomotives of the year 1994. 3-foot Gauge Huckleberry Railroad #11 Magazine: Narrow...

...Huckleberry Railroad #11 Magazine: Narrow Gauge And Short Line Gazette 2008-11/12 Page:...

...Trailer to On3 Magazine: Narrow Gauge And Short Line Gazette 2008-09/10 Page:...

...details. Oahu Railway & Land Company 3-foot Gauge Plymouth Diesel #45 Magazine: Narrow...

...Plymouth Diesel #45 Magazine: Narrow Gauge And Short Line Gazette 2008-09/10 Page:...

...EMD's 3600hp SD45-2 (1972). The DL535E: Narrow Gauge Diesel of the North Magazine:...

...Alco-designed locomotives were built for the three-foot gauge of the White Pass & Yukon. The...

... HO Description: Using a standard gauge Kato NW2, the author shows how he...

...how he kitbashed it into this narrow gauge engine. Includes construction photos and one prototype...

Magazine Articles By Category: Locomotives - Other
...On30 Rail Truck Magazine: Narrow Gauge And Short Line Gazette 2008-09/10 Page:...

Magazine Articles By Category: Locomotives - Steam
...and installing the backhead kit. A Standard Gauge Baldwin Locomotive Works Geared Locomotive Magazine:...

...Works Geared Locomotive Magazine: Narrow Gauge And Short Line Gazette 2008-11/12 Page:...

...one engine was ever built. A Standard Gauge Forney Magazine: Railroad Model Craftsman...

...Thurteah & Weystead Magazine: Narrow Gauge And Short Line Gazette 2007-01/02 Page:...

... Allen J. Brewster Description: The 2-foot-gauge railroad received a 2-4-4-T (a modified Forney)....

...Description: The author used a standard gauge B.T.S. 2-8-0 kit to build the model...

...the model he needed for his standard gauge interchange. Chicago & North Western's Class M-1...

...electronics that goes into the tender. D&RGW Standard-gauge Mikados Magazine: Model Railroader 1978-03...

...Himalayan Railway #777 Magazine: Narrow Gauge And Short Line Gazette 2007-01/02 Page:...

...Scherb Description: This is a 2-foot Gauge 0-4-0T engine that ran the very steep...

...#4 and #5 Magazine: Narrow Gauge And Short Line Gazette 2008-09/10 Page:...

...article on the author's scratchbuilt, 1:24, 45mm gauge "Colonial Engines". These are engines designed for...

...the Bachmann HO-scale model. Modeling Eastern Narrow Gauge Steam Using the Roundhouse 2-8-0 Magazine:...

...this locomotive to work reliably on narrow gauge track. He also briefly discusses the 4-6-0...

...details, and painting and lettering. My Favorite Narrow-gauge Locomotive Magazine: Garden Railways 2009-04...

...Pacific Coast Railroad Magazine: Narrow Gauge And Short Line Gazette 2008-11/12 Page:...

...brass Shays in HO narrow and standard gauge with photographic studies of typical representatives of...

...Coast Railroad #13 Magazine: Narrow Gauge And Short Line Gazette 2007-01/02 Page:...

...Sunset Models Pacific Coast Shay, a standard gauge engine. The article contains prototype photos, completed...

Magazine Articles By Category: M.O.W. Equipment
...Western Spreader OU Magazine: Narrow Gauge And Short Line Gazette 2008-11/12 Page:...

...plows. Includes model and prototype photos. Narrow Gauge Snowplow Magazine: Railroad Model Craftsman...

...a snowplow from a Northeastern kit. Narrow Gauge Track Cleaner Magazine: Railroad Model...

...describe how the wheels were adjusted to gauge, how the trucks were modified, and how...

...was made to look like a doodlebug. Narrow-gauge Rotary Magazine: Railroad Model Craftsman...

Magazine Articles By Category: Model Railroad History
...article chronicles the history of U.S. narrow gauge railroading. TT Anyone? Magazine: Railroad...

Magazine Articles By Category: Model Railroad Manufacturers
...Westside Model Company Magazine: Narrow Gauge And Short Line Gazette 2008-11/12 Page:...

Magazine Articles By Category: Model Railroad Philosophy
... 07/05/2014 Consider Narrow Gauge Magazine: Model Railroader 1978-08 Page:...

...HOn3 Description: The author describes narrow gauge modeling and compares it to standard gauge...

...gauge modeling and compares it to standard gauge modeling. Creating... A Railroad Notebook Magazine:...

...Scale: O Description: Why narrow gauge? O-scale narrow gauge is more fun and...

...Description: Why narrow gauge? O-scale narrow gauge is more fun and allows for more...

...able to compete with the other narrow gauge scales? The author describes what happened with...

...one might want to model in narrow gauge. Where's the Leading Edge? Magazine:...

Magazine Articles By Category: Model Railroad Shows
...David describes attending the 2010 National Narrow Gauge Convention in St. Louis, Missouri. Includes photos...

...brief review of the 2009 National Narrow Gauge Convention in Colorado Springs, CO. The 2010...

...of some of the narrow and standard gauge layouts that were open during the show...

Magazine Articles By Category: Model Railroads and People
...is a member of the Bristol S Gauge Club. Model Railroad Club Tyrant Magazine:...

...by John Olson Magazine: Narrow Gauge And Short Line Gazette 2007-01/02 Page:...

...is over 35 years old. The Narrow Gauge Scene Magazine: Narrow Gauge And...

...Narrow Gauge Scene Magazine: Narrow Gauge And Short Line Gazette 2007-01/02 Page:...

...Hayden photos of John's layout. The Narrow Gauge Scene Magazine: Narrow Gauge And...

...Narrow Gauge Scene Magazine: Narrow Gauge And Short Line Gazette 2008-09/10 Page:...

Magazine Articles By Category: Modules
...Crew's attendance of the 2012 National Narrow Gauge Convention in Randolph, Maine. It includes a...

Magazine Articles By Category: Passenger Cars
...to get rid of his award-winning 1:32n20 gauge passenger car, so he converted it to...

...Includes cutting diagrams, and construction photos. Narrow Gauge Pullman Sleeper Magazine: Model Railroader...

... Steven Brewster Description: Three-foot gauge sleeping cars of the D&RGW. Prototype photos...

...construction photos and scale diagrams. Scratchbuilding a Narrow-gauge Combine Magazine: Model Railroader 1978-11...

Magazine Articles By Category: Railroads
...The "Cenote Railway" Magazine: Narrow Gauge And Short Line Gazette 2008-09/10 Page:...

...Description: Thousands of miles of narrow gauge track was once built in Yucatan to...

...photos, suggested track plan. Along the Narrow Gauge Magazine: Narrow Gauge And Short...

...the Narrow Gauge Magazine: Narrow Gauge And Short Line Gazette 2007-01/02 Page:...

...CP Rail's Kimberley Subdivision and Its Narrow Gauge Connection Magazine: Railroad Model Craftsman...

...compressed applications. Hampton, NJ: The CNJ's Dual Gauge Railroad Junction Magazine: Railroad Model...

... Prototype description of the 2-foot Maine gauge line. Includes diagram for possible track design....

...Old Mormon Trail" Magazine: Narrow Gauge And Short Line Gazette 2008-09/10 Page:...

...Buzzard Light Railway Magazine: Narrow Gauge And Short Line Gazette 2008-11/12 Page:...

...railroad maps, and suggested track plans. Thirty-inch Gauge Railroads Magazine: Narrow Gauge And...

...Thirty-inch Gauge Railroads Magazine: Narrow Gauge And Short Line Gazette 2008-11/12 Page:...

...railroads covered in this twenty-on-article series. Thirty-inch Gauge Railroads Hawaiian Plantation Lines Part 4 Magazine:...

...Lines Part 4 Magazine: Narrow Gauge And Short Line Gazette 2008-09/10 Page:...

...Day bought the equipment of the 30-inch gauge Hawaiian line and brought it to California...

Magazine Articles By Category: Structures
...a watering crane used on the two-foot gauge Sandy River & Rangeley Lakes in Kingsfield,...

Magazine Articles By Category: Structures - Depots/Stations/Yards
...Black Hawk Warehouse Magazine: Narrow Gauge And Short Line Gazette 2008-09/10 Page:...

...Landing Part 3 Magazine: Narrow Gauge And Short Line Gazette 2008-11/12 Page:...

...Landing Freight Depot Magazine: Narrow Gauge And Short Line Gazette 2008-09/10 Page:...

...Railroad Passenger Shelter Magazine: Narrow Gauge And Short Line Gazette 2008-09/10 Page:...

...Works Freight Station Magazine: Narrow Gauge And Short Line Gazette 2008-09/10 Page:...

Magazine Articles By Category: Structures - Engine Servicing
...the Jan/Feb, 1990 issue of the Narrow Gauge and Shortline Gazette. Although freelanced, it is...

...and Slash Burner Magazine: Narrow Gauge And Short Line Gazette 2007-01/02 Page:...

...Co. Engine House Magazine: Narrow Gauge And Short Line Gazette 2008-11/12 Page:...

...with it at the 28th National Narrow Gauge Convention. New Conway Diesel Shop Magazine:...

Magazine Articles By Category: Structures - Industrial
...From Balsa Wood Magazine: Narrow Gauge And Short Line Gazette 2008-11/12 Page:...

...Brickwork at Georgetown Magazine: Narrow Gauge And Short Line Gazette 2008-11/12 Page:...

...& Timber Company Magazine: Narrow Gauge And Short Line Gazette 2007-01/02 Page:...

Magazine Articles By Category: Structures - Towns/Cities
...plans. Alvard's Landing Magazine: Narrow Gauge And Short Line Gazette 2007-01/02 Page:...

...McHugh and Bianchi Magazine: Narrow Gauge And Short Line Gazette 2008-09/10 Page:...

...Station, Elberta, Utah Magazine: Narrow Gauge And Short Line Gazette 2008-11/12 Page:...

Magazine Articles By Category: Structures - Track-side Details
...to build a model of a narrow gauge track scale. Includes how to glue down...

...Redwoods Part 71 Magazine: Narrow Gauge And Short Line Gazette 2008-11/12 Page:...

...Derrick at Incline Magazine: Narrow Gauge And Short Line Gazette 2008-11/12 Page:...

Magazine Articles By Category: Tools
...Redwoods Part 70 Magazine: Narrow Gauge And Short Line Gazette 2008-09/10 Page:...

Magazine Articles By Category: Track
...George Sebastian-Coleman Description: Definitions of narrow gauge railroading. Soo Line Standard Switch Stands Magazine:...

...Turntable in HOn30 Magazine: Narrow Gauge And Short Line Gazette 2007-01/02 Page:...

...author describes how he scratchbuilt this 2-foot gauge, short turntable. It includes prototype photos, scale...

...to Boone Morrison's article in the Narrow Gauge and Short Line Gazette's November/December 1997 issue....

Magazine Articles By Category: Virtual Railroads
... 07/05/2014 Model Railroading in Binary Gauge Magazine: Model Railroader 1984-12 Page:...

Magazine Articles By Issue
...Model Railroading N Scale Railroading N-Scale Narrow Gauge And Short Line Gazette NASG Dispatch NMRA...

Magazine Issue for Narrow Gauge And Short Line Gazette
My Library - Magazine Issue for Narrow Gauge And Short Line Gazette My Library -...

...My Library - Magazine Issue for Narrow Gauge And Short Line Gazette...

1:64 Modeling Guide 2012 Spring Articles
...Description: The author used a standard gauge B.T.S. 2-8-0 kit to build the model...

...the model he needed for his standard gauge interchange. Building Osgood-Bradley "American Flyer" Coaches Pt....

1:64 Modeling Guide 2012 Winter Articles
...Crew's attendance of the 2012 National Narrow Gauge Convention in Randolph, Maine. It includes a...

Garden Railways 2009-04 Articles
...yard office out of it. My Favorite Narrow-gauge Locomotive Page: 46 Author:...

...Cape 7th 4-8-0. The Tuolomne Country Narrow Gauge Garden Railroad Page: 50 Author:...

...in the 1920-30 period modeling 1:20.3 narrow gauge. Bob is the editor of the Narrow...

...Bob is the editor of the Narrow Gauge and Short Line Gazette. Tools! Page:...

Model Railroader 1978-08 Articles
...trestle one. Denver & Rio Grande Western's Narrow-gauge Gondolas Page: 58 Author:...

...has become a family project. Consider Narrow Gauge Page: 89 Author: James...

...HOn3 Description: The author describes narrow gauge modeling and compares it to standard gauge...

...gauge modeling and compares it to standard gauge modeling. Build Your Own Switch Machines Page:...

Model Railroader 1983-07 Articles
...Sunset Models Pacific Coast Shay, a standard gauge engine. The article contains prototype photos, completed...

...freelanced model based on the American narrow gauge prototype. Seaboard Coast Line BQ23-7 Page:...

Model Railroader 1984-12 Articles
...the multi-track snowplow. Model Railroading in Binary Gauge Page: 91 Author: Hal...

Model Railroader 1985-10 Articles
...twist - using small scale live steam. Gauge 1 refers more to the track width...

Model Railroader 1989-07 Articles
...Flat Cars Description: Taking a standard gauge car, the author modeled a narrow gauge...

...gauge car, the author modeled a narrow gauge one. However, most of the article appears...

Model Railroader 1990-12 Articles
...scenery and weathering is very realistic. Narrow Gauge Pullman Sleeper Page: 100 Author:...

... Passenger Cars Description: Three-foot gauge sleeping cars of the D&RGW. Prototype photos...

Model Railroader 2000-01 Articles
... O Description: Includes prototype narrow gauge photo from 1909. Metropolitan Transit Authority Part...

Model Railroader 2000-04 Articles
...Jack's backyard. It models the California narrow gauge set in the 1930's. Although he started...

Model Railroader 2002-10 Articles
...without watching the clock. Rocky Mountain Narrow Gauge Page: 64 Author: Kenneth...

Model Railroader 2003-05 Articles
... Track Description: Definitions of narrow gauge railroading. Narrow Gauge Through the San Juan...

... Definitions of narrow gauge railroading. Narrow Gauge Through the San Juan Mountains Page:...

Model Railroader 2003-11 Articles
...describes Richard Miller's O-scale standard and narrow gauge Denver & Rio Grand Western. Includes a...

Model Railroader 2006-01 Articles
...Pacific in Minnesota layout. An Expanding Narrow Gauge Empire Page: 86 Author:...

...On3 Description: The Cascade County Narrow Gauge layout measures 26 x 31 feet, is...

Model Railroader 2006-07 Articles
...step-by-step photos, prototype photo, and diagrams. Narrow Gauge in a Garage Part 1 Page:...

Model Railroader 2006-08 Articles
...this layout for over a decade. Narrow Gauge in a Garage Part 2 Page:...

Model Railroader 2006-09 Articles
...ballasting turnouts, and tuning commercial turnouts. Narrow Gauge in a Garage Part 3 Page:...

Model Railroader 2010-04 Articles
...perimeter of the layout and the narrow gauge EBT in the center island. Includes a...

N-Scale 2003-05/06 Articles
...CPR telltales circa 1919. Steel City N Gauge Model Railway Club Page: 32 Author:...

Narrow Gauge And Short Line Gazette 2007-01/02 Articles
My Library - Narrow Gauge And Short Line Gazette 2007-01/02 Articles My...

...Gazette 2007-01/02 Articles My Library - Narrow Gauge And Short Line Gazette 2007-01/02 Articles...

...author describes how he scratchbuilt this 2-foot gauge, short turntable. It includes prototype photos, scale...

...A 5' by 1' imaginary English 18-inch gauge industrial railway diorama in 1:25 scale. Includes...

...Steam Description: This is a 2-foot Gauge 0-4-0T engine that ran the very steep...

...of engines #13, 18, and 19 2-foot Gauge Bridgton & Harrison Railroad Boxcar #56 Page:...

...this car. Ohio River & Western 3-foot Gauge Gondola #279 Page: 59 Author:...

...drawings of this car. Along the Narrow Gauge Page: 62 Author: Mallory...

...switching from HOn3 to On3. The Narrow Gauge Scene Page: 82 Author:...

Narrow Gauge And Short Line Gazette 2008-09/10 Articles
My Library - Narrow Gauge And Short Line Gazette 2008-09/10 Articles My...

...Gazette 2008-09/10 Articles My Library - Narrow Gauge And Short Line Gazette 2008-09/10 Articles...

...article on the author's scratchbuilt, 1:24, 45mm gauge "Colonial Engines". These are engines designed for...

...structure. Oahu Railway & Land Company 3-foot Gauge Plymouth Diesel #45 Page: 53 Author:...

...Description: Thousands of miles of narrow gauge track was once built in Yucatan to...

...quarry rock near Salt Lake City. Thirty-inch Gauge Railroads Hawaiian Plantation Lines Part 4 Page:...

...Day bought the equipment of the 30-inch gauge Hawaiian line and brought it to California...

...in downtown Santa Cruz, California. The Narrow Gauge Scene Page: 86 Author:...

Narrow Gauge And Short Line Gazette 2008-11/12 Articles
My Library - Narrow Gauge And Short Line Gazette 2008-11/12 Articles My...

...Gazette 2008-11/12 Articles My Library - Narrow Gauge And Short Line Gazette 2008-11/12 Articles...

...the layout has been completed. A Standard Gauge Baldwin Locomotive Works Geared Locomotive Page:...

...with it at the 28th National Narrow Gauge Convention. Mack Trucks Page: 39 Author:...

...versions of the D&RGW spreader OU. 3-foot Gauge Huckleberry Railroad #11 Page: 47 Author:...

...engine. No other information is provided. Thirty-inch Gauge Railroads Page: 62 Author:...

NASG Dispatch 2004-02 Articles
...article chronicles the history of U.S. narrow gauge railroading. Making Conifer Trees Page: 26...

NASG Dispatch 2004-12 Articles
...one might want to model in narrow gauge. Meet an S Gauger Page: 10...

NASG Dispatch 2005-06 Articles
...is a member of the Bristol S Gauge Club. Trainstuff LLC's Williamson's Warehouse Page:...

NASG Dispatch 2009-04 Articles
...of some of the narrow and standard gauge layouts that were open during the show...

...ends to allow for continuous running. S Gauge One Evening Project Page: 30 Author:...

NASG Dispatch 2009-12 Articles
...brief review of the 2009 National Narrow Gauge Convention in Colorado Springs, CO. S Tracks...

NASG Dispatch 2010-10 Articles
...David describes attending the 2010 National Narrow Gauge Convention in St. Louis, Missouri. Includes photos...

NASG Dispatch 2010-12 Articles
...and his wife and granddaughter built a multi-gauge layout, open to visitors. Another Motormax Diorama...

...able to compete with the other narrow gauge scales? The author describes what happened with...

NMRA Bulletin 2002-06 Articles
...to build a model of a narrow gauge track scale. Includes how to glue down...

O Scale Trains Magazine 02 May 2002 Articles
...Scale: O Description: Why narrow gauge? O-scale narrow gauge is more fun and...

...Description: Why narrow gauge? O-scale narrow gauge is more fun and allows for more...

Railroad Model Craftsman 1972-06 Articles
...of passenger cars and cabooses. Freelanced Narrow Gauge Flatcar Page: 34 Author:...

...strip wood, the author built this narrow gauge flat car. With some adjustment, this car...

...could also be built to fit standard gauge. RMC/Dremel Kitbashing Award Page: 36 Author:...

Railroad Model Craftsman 1973-05 Articles
...HO scale and one in 3/8" scale, Gauge 1. Includes a bit of history, model...

Railroad Model Craftsman 1974-02 Articles
...drawing accompany this article about these narrow gauge hopper cars.

Railroad Model Craftsman 1977-08 Articles
...brass Shays in HO narrow and standard gauge with photographic studies of typical representatives of...

...and close-up detail photos of the prototype. Narrow-gauge Rotary Page: 60 Author:...

...Using European HOn30 arch bars for two-foot gauge lines of Maine. SWAC/2 Part 1 Page:...

Railroad Model Craftsman 1980-12 Articles
...4x8 layout (track plan and photos). Narrow Gauge Snowplow Page: 82 Author:...

Railroad Model Craftsman 1991-03 Articles
...ground cover, and scenic details. Kitbashing Narrow Gauge Hopper Cars Page: 64 Author:...

...models using the Tichy Train Group's standard gauge hoppers. Los Angeles' LRV's Page: 65...

Railroad Model Craftsman 1991-04 Articles
...control, scenery design, and the added narrow gauge line. The DL535E: Narrow Gauge Diesel of...

...added narrow gauge line. The DL535E: Narrow Gauge Diesel of the North Page: 54...

...Alco-designed locomotives were built for the three-foot gauge of the White Pass & Yukon. The...

Railroad Model Craftsman 1991-05 Articles
...Western flat car is included. A Standard Gauge Forney Page: 59 Author:...

Railroad Model Craftsman 1991-09 Articles
...19 feet, double-level layout models a narrow gauge line from Colorado to California. It is...

Railroad Model Craftsman 2002-08 Articles
...CP Rail's Kimberley Subdivision and Its Narrow Gauge Connection Page: 77 Author:...

Railroad Model Craftsman 2002-10 Articles
... Prototype description of the 2-foot Maine gauge line. Includes diagram for possible track design....

Railroad Model Craftsman 2003-02 Articles
...a watering crane used on the two-foot gauge Sandy River & Rangeley Lakes in Kingsfield,...

Railroad Model Craftsman 2005-10 Articles
...This article covers using the NMRA standards gauge to check your rolling stock's wheels, verifying...

Railroad Model Craftsman 2006-07 Articles
...to keep trains running. Modeling Eastern Narrow Gauge Steam Using the Roundhouse 2-8-0 Page:...

...this locomotive to work reliably on narrow gauge track. He also briefly discusses the 4-6-0...

Railroad Model Craftsman 2006-09 Articles
...22' by 46' basement, and this narrow gauge line is set in 1895 in California....

Railroad Model Craftsman 2006-12 Articles
... A beautiful rendition of the standard gauge shortline in West Virginia. It still used...

...Includes information about the BC&G today. Narrow Gauge Track Cleaner Page: 61 Author:...

...describe how the wheels were adjusted to gauge, how the trucks were modified, and how...

Railroad Model Craftsman 2007-02 Articles
...in Pennsylvania, with connections to the standard gauge PRR. The layout was started in 1978...

Railroad Model Craftsman 2007-10 Articles
...the Jan/Feb, 1990 issue of the Narrow Gauge and Shortline Gazette. Although freelanced, it is...

Railroad Model Craftsman 2008-12 Articles
...and photos. Hampton, NJ: The CNJ's Dual Gauge Railroad Junction Page: 91 Author:...

Railroad Model Craftsman 2009-01 Articles
...features two of the owner's favorite narrow gauge lines set in 1957. Includes a trackplan...

Railroad Model Craftsman 2009-12 Articles
...to get rid of his award-winning 1:32n20 gauge passenger car, so he converted it to...

Railroad Model Craftsman 2010-07 Articles
...to Boone Morrison's article in the Narrow Gauge and Short Line Gazette's November/December 1997 issue....

Railroad Model Craftsman 2010-08 Articles
... HO Description: Using a standard gauge Kato NW2, the author shows how he...

...how he kitbashed it into this narrow gauge engine. Includes construction photos and one prototype...

Railroad Model Craftsman 2010-09 Articles
...to model a shed. Scratchbuilding C&NW Narrow Gauge Boxcar No. 10 Page: 48 Author:...

Railroad Model Craftsman 2011-03 Articles
...mysterious history of this Nevada County Narrow Gauge RR boxcar revealed by newly discovered photos....

Railroad Model Craftsman 2012-01 Articles
...accessories and how to model in narrow gauge. Modeling Less-common Tank Cars Page: 61...

Railroad Model Craftsman 2014-05 Articles
...and model photos. Canadian National Rwy. 42" Gauge Wooden Van Page: 58 Author:...

The Modeler's Annual Winter 2014 Articles
...on a watery shore The Plettenberg Narrow Gauge Light Railway Page: 49 Author:...

...of a portion of the Plettenberg narrow gauge line that ran through the streets. The...

...streets. The scale was chosen so that Gauge One track was a perfect match for...

Magazine Articles for G Scale
...to get rid of his award-winning 1:32n20 gauge passenger car, so he converted it to...

...Jack's backyard. It models the California narrow gauge set in the 1930's. Although he started...

...mall. Mack Trucks Magazine: Narrow Gauge And Short Line Gazette 2008-11/12 Page:...

...for night-time operations. The Tuolomne Country Narrow Gauge Garden Railroad Magazine: Garden Railways...

...in the 1920-30 period modeling 1:20.3 narrow gauge. Bob is the editor of the Narrow...

...Bob is the editor of the Narrow Gauge and Short Line Gazette. The Woodland Railway...

Magazine Articles for HO Scale
...Black Hawk Warehouse Magazine: Narrow Gauge And Short Line Gazette 2008-09/10 Page:...

...range. Alvard's Landing Magazine: Narrow Gauge And Short Line Gazette 2007-01/02 Page:...

...to build a model of a narrow gauge track scale. Includes how to glue down...

...HO scale and one in 3/8" scale, Gauge 1. Includes a bit of history, model...

...brass Shays in HO narrow and standard gauge with photographic studies of typical representatives of...

...and an Atlas kit. The DL535E: Narrow Gauge Diesel of the North Magazine:...

...Alco-designed locomotives were built for the three-foot gauge of the White Pass & Yukon. The...

...control, scenery design, and the added narrow gauge line. The Hazzard County Short Line Magazine:...

...Derrick at Incline Magazine: Narrow Gauge And Short Line Gazette 2008-11/12 Page:...

...- Diesel Description: Using a standard gauge Kato NW2, the author shows how he...

...how he kitbashed it into this narrow gauge engine. Includes construction photos and one prototype...

...perimeter of the layout and the narrow gauge EBT in the center island. Includes a...

Magazine Articles for HOn3 Scale
...Junction in HOn3 Magazine: Narrow Gauge And Short Line Gazette 2008-09/10 Page:...

...The article includes construction photos. Consider Narrow Gauge Magazine: Model Railroader 1978-08 Page:...

...Philosophy Description: The author describes narrow gauge modeling and compares it to standard gauge...

...gauge modeling and compares it to standard gauge modeling. Denver & Rio Grande Western Spreader...

...Western Spreader OU Magazine: Narrow Gauge And Short Line Gazette 2008-11/12 Page:...

...features two of the owner's favorite narrow gauge lines set in 1957. Includes a trackplan...

...freelanced model based on the American narrow gauge prototype. Fred Oster's HOn3 Denver & Rio...

... Photos, and track plan. Freelanced Narrow Gauge Flatcar Magazine: Railroad Model Craftsman...

...strip wood, the author built this narrow gauge flat car. With some adjustment, this car...

...could also be built to fit standard gauge. Freelanced Three Footers Magazine: Railroad...

...drawings, and a parts list. Kitbashing Narrow Gauge Hopper Cars Magazine: Railroad Model...

...models using the Tichy Train Group's standard gauge hoppers. Modeling Eastern Narrow Gauge Steam Using...

...Group's standard gauge hoppers. Modeling Eastern Narrow Gauge Steam Using the Roundhouse 2-8-0 Magazine:...

...this locomotive to work reliably on narrow gauge track. He also briefly discusses the 4-6-0...

...Rio Grande Lande Magazine: Narrow Gauge And Short Line Gazette 2007-01/02 Page:...

...scenery set in the 1950's Colorado. Narrow Gauge Snowplow Magazine: Railroad Model Craftsman...

...a snowplow from a Northeastern kit. Narrow Gauge Track Cleaner Magazine: Railroad Model...

...describe how the wheels were adjusted to gauge, how the trucks were modified, and how...

...was made to look like a doodlebug. Narrow-gauge Rotary Magazine: Railroad Model Craftsman...

...in Pennsylvania, with connections to the standard gauge PRR. The layout was started in 1978...

Magazine Articles for HOn30 Scale
...Using European HOn30 arch bars for two-foot gauge lines of Maine. Kitbashing a Diesel Critter...

...Turntable in HOn30 Magazine: Narrow Gauge And Short Line Gazette 2007-01/02 Page:...

...author describes how he scratchbuilt this 2-foot gauge, short turntable. It includes prototype photos, scale...

Magazine Articles for Large Scale Scale
...Scale Tank Cars Magazine: Narrow Gauge And Short Line Gazette 2007-01/02 Page:...

...#4 and #5 Magazine: Narrow Gauge And Short Line Gazette 2008-09/10 Page:...

...article on the author's scratchbuilt, 1:24, 45mm gauge "Colonial Engines". These are engines designed for...

...a Small Space Magazine: Narrow Gauge And Short Line Gazette 2008-09/10 Page:...

...twist - using small scale live steam. Gauge 1 refers more to the track width...

...scale. Sutton Wharf Magazine: Narrow Gauge And Short Line Gazette 2007-01/02 Page:...

...A 5' by 1' imaginary English 18-inch gauge industrial railway diorama in 1:25 scale. Includes...

...as one can get. The Plettenberg Narrow Gauge Light Railway Magazine: The Modeler's...

...of a portion of the Plettenberg narrow gauge line that ran through the streets. The...

...streets. The scale was chosen so that Gauge One track was a perfect match for...

Magazine Articles for N Scale
...Landing Part 3 Magazine: Narrow Gauge And Short Line Gazette 2008-11/12 Page:...

...Landing Freight Depot Magazine: Narrow Gauge And Short Line Gazette 2008-09/10 Page:...

...club's experiences so far. Steel City N Gauge Model Railway Club Magazine: N-Scale...

Magazine Articles for O Scale
...the Jan/Feb, 1990 issue of the Narrow Gauge and Shortline Gazette. Although freelanced, it is...

...Layout Design Description: Includes prototype narrow gauge photo from 1909. Having It All Colorado...

...describes Richard Miller's O-scale standard and narrow gauge Denver & Rio Grand Western. Includes a...

...Co. Engine House Magazine: Narrow Gauge And Short Line Gazette 2008-11/12 Page:...

...with it at the 28th National Narrow Gauge Convention. Narrow Minded Magazine: O...

...Model Railroad Philosophy Description: Why narrow gauge? O-scale narrow gauge is more fun and...

...Description: Why narrow gauge? O-scale narrow gauge is more fun and allows for more...

...From Balsa Wood Magazine: Narrow Gauge And Short Line Gazette 2008-11/12 Page:...

...Redwoods Part 71 Magazine: Narrow Gauge And Short Line Gazette 2008-11/12 Page:...

...Sunset Models Pacific Coast Shay, a standard gauge engine. The article contains prototype photos, completed...

...& Timber Company Magazine: Narrow Gauge And Short Line Gazette 2007-01/02 Page:...

Magazine Articles for On2 Scale
...A group of model railroaders built a 2-foot-gauge layout in O-scale. Kitbashing Tank Car 22...

...a watering crane used on the two-foot gauge Sandy River & Rangeley Lakes in Kingsfield,...

Magazine Articles for On3 Scale
... 07/05/2014 An Expanding Narrow Gauge Empire Magazine: Model Railroader 2006-01...

...Layouts Description: The Cascade County Narrow Gauge layout measures 26 x 31 feet, is...

...Trailer to On3 Magazine: Narrow Gauge And Short Line Gazette 2008-09/10 Page:...

...Southern Sophir District Magazine: Narrow Gauge And Short Line Gazette 2008-11/12 Page:...

...of the layout has been completed. Narrow Gauge in a Garage Part 1 Magazine:...

...adding DCC to an On2-1/2 Porter. Narrow Gauge in a Garage Part 2 Magazine:...

...shelves upon which the layout rests. Narrow Gauge in a Garage Part 3 Magazine:...

...to the Redwoods Magazine: Narrow Gauge And Short Line Gazette 2007-01/02 Page:...

...Redwoods Part 70 Magazine: Narrow Gauge And Short Line Gazette 2008-09/10 Page:...

...to build his layout. Scratchbuilding C&NW Narrow Gauge Boxcar No. 10 Magazine: Railroad...

...19 feet, double-level layout models a narrow gauge line from Colorado to California. It is...

Magazine Articles for On30 Scale
...Thurteah & Weystead Magazine: Narrow Gauge And Short Line Gazette 2007-01/02 Page:...

...On30 Rail Truck Magazine: Narrow Gauge And Short Line Gazette 2008-09/10 Page:...

Magazine Articles for S Scale
...Description: The author used a standard gauge B.T.S. 2-8-0 kit to build the model...

...the model he needed for his standard gauge interchange. Building a Urethane PRR GRa-class Gondola...

...Crew's attendance of the 2012 National Narrow Gauge Convention in Randolph, Maine. It includes a...

...is a member of the Bristol S Gauge Club. Meet an S Gauger Magazine:...

...essay of Roger's beautiful, finished layout. S Gauge One Evening Project Magazine: NASG...

...David describes attending the 2010 National Narrow Gauge Convention in St. Louis, Missouri. Includes photos...

...able to compete with the other narrow gauge scales? The author describes what happened with...

... A beautiful rendition of the standard gauge shortline in West Virginia. It still used...

...one might want to model in narrow gauge. This Time It's S Chapter II Magazine:...

Magazine Articles for Sn3 Scale
...layout. Several close-up photos are included. Narrow Gauge Through the San Juan Mountains Magazine:...

...the RGS in 1950. Rocky Mountain Narrow Gauge Magazine: Model Railroader 2002-10 Page:...

...22' by 46' basement, and this narrow gauge line is set in 1895 in California....

...of some of the narrow and standard gauge layouts that were open during the show...

Railroading Videos - The Last Steam Operated Sawmill
...huge complex is served by a standard gauge railroad, itself operating vintage GP-9 diesels.

Sitemap by Page Titles
... April 21, 2012 - Coupler Gauge November 03, 2008 -...

Sitemap by Last-modified Date
...- General Rolling Stock - Coupler Gauge October 29, 2008 - The PRR...

About S-scale
...scale modelers within "S". These includes standard gauge (American 4', 8-1/2" track gauge), narrow gauge...

...includes standard gauge (American 4', 8-1/2" track gauge), narrow gauge (Sn3, Sn2, Sn42, etc.), and...

...gauge (American 4', 8-1/2" track gauge), narrow gauge (Sn3, Sn2, Sn42, etc.), and trolley modeling....

gauger
Magazine Articles By Bill Fraley
...involvement in the hobby. Meet an S Gauger Magazine: NASG Dispatch 2005-06 Page:...

...Bristol S Gauge Club. Meet an S Gauger Magazine: NASG Dispatch 2004-12 Page:...

...busy photographing SHS products. Meet an S Gauger Magazine: NASG Dispatch 2011-02 Page:...

Magazine Articles By Gaylord Gill
... 07/05/2014 Meet An S Gauger Magazine: NASG Dispatch 2010-02 Page:...

Magazine Articles By George Reneris
... 07/05/2014 Meet an S Gauger - George Reneris Magazine: NASG...

Magazine Articles By Category: Layouts - S
... 07/05/2014 Meet an S Gauger - George Reneris Magazine: NASG...

Magazine Articles By Category: Model Railroads and People
...for this past year. Meet an S Gauger Magazine: NASG Dispatch 2004-12 Page:...

...busy photographing SHS products. Meet an S Gauger Magazine: NASG Dispatch 2011-02 Page:...

...models the Lehigh Valley. Meet An S Gauger Magazine: NASG Dispatch 2010-02 Page:...

...a Master Model Railroader. Meet an S Gauger Magazine: NASG Dispatch 2005-06 Page:...

NASG Dispatch 2004-12 Articles
...model in narrow gauge. Meet an S Gauger Page: 10 Author: Bill...

NASG Dispatch 2005-06 Articles
...to create walk-in layouts. Meet an S Gauger Page: 14 Author: Bill...

NASG Dispatch 2009-02 Articles
...on an S-scale layout. Meet an S Gauger - George Reneris Page: 16 Author:...

NASG Dispatch 2010-02 Articles
...for this annual show. Meet An S Gauger Page: 13 Author: Gaylord...

NASG Dispatch 2011-02 Articles
...a ACF 2-bay hopper. Meet an S Gauger Page: 20 Author: Bill...

Magazine Articles for S Scale
...this year's national convention. Meet an S Gauger Magazine: NASG Dispatch 2011-02 Page:...

...models the Lehigh Valley. Meet an S Gauger Magazine: NASG Dispatch 2005-06 Page:...

...Bristol S Gauge Club. Meet an S Gauger Magazine: NASG Dispatch 2004-12 Page:...

...busy photographing SHS products. Meet an S Gauger - George Reneris Magazine: NASG...

gaugers
Hand-laying Track - 2. Preparing and Applying Ballast
...For our club layout, the Houston S Gaugers, we were using Arizona Rock & Minerals'...

Scenery - Conifer Trees
...the double-track wye of the Houston S Gaugers' club layout. Believe it or not, there...

The Hobby - Changing Modeling Scales
...were invited to a local Houston S Gaugers club meeting at one of the members'...

The Hobby - Clubs
...Clubs External Reference: Houston S Gaugers After switching...

...were invited to visit the Houston S Gaugers club in the summer of 2008. We...

Equipment - PRR FA-2/FB-2 Cab Units - Model Information
...the engines on the Houston S Gaugers club layout on October 8, 2011 ,...

Equipment - PRR NW2 Switcher - Break-in
...On February 21, 2009, the Houston S Gaugers club were able to participate in the...

Equipment - PRR NW2 Switcher - Motor Replacement
...with my engine. On our Houston S Gaugers club layout the engine would short out...

Equipment - PRR NW2 Switcher - S-CAB
...our Digitrax-powered club layout (the Houston S Gaugers). We had a one-day show. As my...

The PRR Chartiers Branch - Progress Report - 2011-07 Report
...trees for our club, the Houston S Gaugers, for a recent show. Rather than putting...

The PRR Chartiers Branch - Progress Report - 2011-09 Report
...be connected up to the Houston S Gaugers' club layout. The club has a branch...

The PRR Chartiers Branch - Progress Report - 2014-01 Report
...two shows in which the Houston S Gaugers participated, I built a collection of new...

Magazine Articles By Bob Werre
...the help of the local Houston S Gaugers, and eventually moved to Rusty's house. The...

Magazine Articles By Sam Powell
... "The Magnificent Seven" - Seven S gaugers who influenced Sam. They are Ed Schumacher,...

Magazine Articles By Category: Layouts - S
...the help of the local Houston S Gaugers, and eventually moved to Rusty's house. The...

Magazine Articles By Category: Model Railroads and People
... "The Magnificent Seven" - Seven S gaugers who influenced Sam. They are Ed Schumacher,...

Model Railroader 1989-07 Articles
...the help of the local Houston S Gaugers, and eventually moved to Rusty's house. The...

NASG Dispatch 2010-04 Articles
... "The Magnificent Seven" - Seven S gaugers who influenced Sam. They are Ed Schumacher,...

Magazine Articles for S Scale
... "The Magnificent Seven" - Seven S gaugers who influenced Sam. They are Ed Schumacher,...

...the help of the local Houston S Gaugers, and eventually moved to Rusty's house. The...

Online Digital Videos
...to my layout or our Houston S Gaugers' club layout. The numbers after the link...

...Watch the clip (1:18) Houston S Gaugers Houston S Gaugers Layout Farm Scene Taken...

... (1:18) Houston S Gaugers Houston S Gaugers Layout Farm Scene Taken at a low...

...Watch the clip (0:41) Houston S Gaugers Layout Freight Crossing A freight train is...

...Watch the clip (0:21) Houston S Gaugers' Freight and Passenger Trains Taken at the...

...Watch the clip (0:27) Houston S Gaugers' Largest Layout This clip shows a quick...

...Watch the clip (0:17) Houston S Gaugers' Layout Drive-thru This is a video I...

...the train, running on the Houston S Gaugers' club layout at the February 16, 2013...

...Watch the clip (2:16) Houston S Gaugers' Layout Showing Passenger Train This video was...

...Watch the clip (0:25) Houston S Gaugers' Wye Modules Demo After several weeks of...

...the basic work of the Houston S Gaugers' club layout modules that form a double-track...

...Watch the clip (8:32) Houston S Gaugers' Wye Modules Go Public A brief video...

...freight train going through the Houston S Gaugers' club layout's wye modules. This was the...

...- Diesel FA-2 Consist On Houston S Gaugers Layout This is a brief clip of...

... (0:15) FA-2 Consist On Houston S Gaugers Layout (v2) Here is another clip of...

...of wye modules of the Houston S Gaugers club layout. Recorded: 02/19/2011...

...clip (0:20) RS-1 on Houston S Gaugers Layout Taken at the Memorial Mall Father's...

About pmrr.org
...layout photographer) to join the Houston S Gaugers. We went to the next meeting and...

...webmaster and we created our Houston S Gaugers web site, which I update after...

...its flavors, the National Association of S Gaugers. In December 2011 I was contacted by...

Awards
...attend the 2011 National Association of S Gaugers' annual convention in California, I received the...

Structures - Itchy's Crab Shack
...the diorama placed on the Houston S Gaugers' wye module for a recent show.

Structures - Outhouse
...recent train show, on the Houston S Gaugers modular layout where we display this structure...

Structures - Residence
...the corner modules of the Houston S Gaugers' model railroad club's layout. Here are a...

gauges
Hand-laying Track - 5. Laying Rail
...other tie. I use the code 83 gauges by Tomalco Track to make sure the...

...are right next to each other. These gauges, by the way, cause the rail to...

...the curves are nice and smooth. The gauges help a lot when laying curved rail....

General Rolling Stock - Coupler Gauge
...pain to only have one of those gauges on one side, because I had to...

...the other coupler. Needing two Kadee coupler gauges would now total $30. After some measuring...

The PRR Chartiers Branch - Progress Report - 2013-04 Report
...end of the bridge. The Tomalco track gauges allow me to center the rails across...

Railroading Books - Creating Micro Layouts
...Proportions - the Influence of Scales and Gauges 3 15 Making Tracks -...

Railroading Books - Great Model Railroads 2014
...Maine that year. Includes a side-bar on gauges (narrow and wide), and one on how...

Magazine Articles By Jim Kelly
...to your design criteria. Introducing Scales and Gauges Magazine: Model Railroader 1985-12 Page:...

Magazine Articles By Lee Vande Visse
... 07/05/2014 A Bulkhead Flatcar for Two Gauges Magazine: Model Railroader 1989-07 Page:...

Magazine Articles By Roger Carp
... 07/05/2014 Basics of Scale and Gauges Magazine: Model Railroader 1990-12 Page:...

...the differences of all the scales and gauges from Z to G.

Magazine Articles By Category: Freight Cars - Flat Cars
...HO-scale load. A Bulkhead Flatcar for Two Gauges Magazine: Model Railroader 1989-07 Page:...

Magazine Articles By Category: Model Railroad Terminology
... 07/05/2014 Basics of Scale and Gauges Magazine: Model Railroader 1990-12 Page:...

...the differences of all the scales and gauges from Z to G. Buying Your First...

...the scale speed easy. Introducing Scales and Gauges Magazine: Model Railroader 1985-12 Page:...

Model Railroader 1985-12 Articles
...their simple switch machine. Introducing Scales and Gauges Page: 92 Author: Jim...

Model Railroader 1989-07 Articles
...prototype photo. A Bulkhead Flatcar for Two Gauges Page: 64 Author: Lee...

Model Railroader 1990-12 Articles
...decals are made. Basics of Scale and Gauges Page: 144 Author: Roger...

...the differences of all the scales and gauges from Z to G. Aurora's Model Railroad...

gauley
Railroading Books - Great Model Railroads 2011
...Line Brook Stover's S-scale Buffalo Creek & Gauley layout. 36 In the Shadow of...

Magazine Articles By Brooks Stover
...a caboose for the Buffalo Creek & Gauley railroad which he models. The Buffalo Creek...

...which he models. The Buffalo Creek & Gauley R.R. Magazine: Railroad Model Craftsman...

Magazine Articles By C.J. Riley
...- Industrial Scale: HO Description: Gauley Valley Feeds photo.

Magazine Articles By Category: Cabooses
...a caboose for the Buffalo Creek & Gauley railroad which he models. Bash a Transfer...

Magazine Articles By Category: Layouts - S
...the convention tours. The Buffalo Creek & Gauley R.R. Magazine: Railroad Model Craftsman...

Magazine Articles By Category: Structures - Industrial
...C.J. Riley Scale: HO Description: Gauley Valley Feeds photo. Modeling a Cotton Gin...

1:64 Modeling Guide 2012 Summer Articles
...a caboose for the Buffalo Creek & Gauley railroad which he models. Engineering Department Page:...

Model Railroader 1977-12 Articles
...- Industrial Scale: HO Description: Gauley Valley Feeds photo. Scratchbuilding a Turntable Page:...

Railroad Model Craftsman 2006-12 Articles
... 07/05/2014 The Buffalo Creek & Gauley R.R. Page: 52 Author:...

Magazine Articles for HO Scale
... Structures - Industrial Description: Gauley Valley Feeds photo. Model of the Month...

Magazine Articles for S Scale
...a caboose for the Buffalo Creek & Gauley railroad which he models. Best In Show...

...an Sn22 tramway. The Buffalo Creek & Gauley R.R. Magazine: Railroad Model Craftsman...

gauze
Railroading Books - How to Build Realistic Model Railroad Scenery
...Working with plaster. Adding paper towels or gauze to form strong scenery bases. Working with...

gave
Animation - Experimental Doors
...rods. I used 5-minute epoxy again. It gave me time to adjust the weights that...

Electronics Projects - Modifying Tortoises
...this issue for all the turnouts that gave me this problem.

Painting - Airbrush Setup
...no matching parts could be found. I gave up for a while. One day I...

General Rolling Stock - Coupler Gauge
...longer than a single sheet of styrene gave me the idea of adding two pieces...

N-scale Equipment - Con-Cor 4-8-4 - DCC Conversion
...I belonged, and found one where someone gave some hints about how to remove the...

N-scale Equipment - Kato 2-8-2 - Coupler Conversion
...tender were also a perfect match. This gave me some confidence to go ahead with...

N-scale Equipment - Model Power 4-6-2 - Coupler Conversion
...widen the area for the coupler, I gave up and decided to cut off the...

N-scale Equipment - Rivarossi 2-8-8-2 - DCC Conversion
...of the track. Jim Hinds (Richmond Controls) gave me a wonderful, and obvious, solution: reverse...

Scenery - Telegraph/Telephone Poles
...I then sanded the top smooth, which gave it a bit of rounded effect. This...

The Hobby - Changing Modeling Scales
...Lots of people answered my questions and gave me lots of good ideas. Many also...

...me lots of good ideas. Many also gave words of encouragement, because almost all had...

Tortoise Installation Ideas - Sideways Installation
...installed it on the Tortoise. This then gave me an idea of where the Tortoise...

Custom Track Solutions - Helix
...up to now were just temporary. It gave me some time to think about the...

Woodworking - Control Panels
...high-quality photography paper, which was expensive, but gave me the great results you see above.

Equipment - PRR FA-2/FB-2 Cab Units - Prototype Information
...an A-B-A configuration, fairly permanently coupled. This gave the consist a total of 4,800 hp....

Equipment - PRR FA-2/FB-2 Cab Units - Regearing
...slit in the plastic joint piece. That gave me a good, safe grip on it...

Equipment - PRR FM Flat Car - Construction: Painting
...S-Helper Service and American Models wheelsets). I gave up on doing that. I'll eventually replace...

Equipment - PRR FM Flat Car - Construction: Decals
...photo. After the decals dried overnight, I gave them a light spray of Testors Dullcote....

Equipment - PRR H21a Hopper - Construction: Body
...from studying photos. Careful cutting and snapping gave me the two side panels. Again, using...

Equipment - PRR N5c Cabin Car - Construction: Wheels and Couplers
...made about 5 or 6 before I gave up. Those were hard to bend and...

...of wheels in it. I finally just gave up. I also noticed one day that...

Equipment - PRR N5c Cabin Car - Construction: Interior
..."Sand" along with 20% isopropyl alcohol. This gave me, at least to my eye, and...

Equipment - PRR N5c Cabin Car - Construction: Completion
...had dried for a few days, I gave the whole car a spray of Testors'...

Equipment - PRR RS-1 Road Switcher - Construction: Completion
...body (or removed from the body; both gave me trouble before). Even after I wrote...

Equipment - PRR RS-1 Road Switcher - Construction: Chassis
...the kit's instructions several times. I finally gave up and sent an e-mail to Jeff...

...phrased the instructions slightly differently, which eventually gave me the clue. The kit's instructions keep...

Equipment - PRR RS-1 Road Switcher - Construction: Adding Details
...found a system I could use that gave me reasonably close copies of each other....

...each side) at a time. After I gave the 5-minute epoxy enough time to cure,...

P & C Railroad Version 2 - Progress Report - 2000-12 Report
...to come home to a layout that gave me additional stress. I wanted a simpler,...

P & C Railroad Version 4 - Progress Report - 2003-09 Report
...also to cover all joint compounding. It gave me a nice blank slate onto which...

The PRR Chartiers Branch - Progress Report - 2011-11 Report
...and poured it on the creek. This gave me about 3/8" of "water". The view...

The PRR Chartiers Branch - Progress Report - 2012-03 Report
...typical tie on top of that. This gave me the height of where the bridge's...

The PRR Chartiers Branch - Progress Report - 2014-02 Report
...building, but a steady hand and patience gave me the results I wanted. The factory...

The PRR Chartiers Branch - Progress Report - 2008-10 Report
...layout rather than on the computer. This gave me a better feel for what was...

Magazine Articles By Michael Primack
...Description: Moving to more realistic track gave the author the desire to continue to...

Magazine Articles By Category: Layouts - O
...Description: Moving to more realistic track gave the author the desire to continue to...

Model Railroader 1990-06 Articles
...Description: Moving to more realistic track gave the author the desire to continue to...

Magazine Articles for O Scale
...Description: Moving to more realistic track gave the author the desire to continue to...

Deck Plate Girder Bridge - Deck Plate Girder Bridge
...scale 40-foot span that I have. This gave me an opportunity to build another one...

Furniture Factory - Main Factory Building
...trying to cut one such panel, I gave up. It is very hard to cut...

O'Brien Steel Construction Co. - Detailing
...go around the complex curve. I finally gave up and decided on the simple design...

Team Track Platform
...two heavy coats of the ink. This gave the structure a nice, old-gray look. The...

Scratch-built Turntable - Diamond Scale N-135 Kit
...smoothly over the turntable pit rail. I gave up. Over the years I have moved,...

...photo I took, so I presume I gave up on the kit after this.

gaylord
Magazine Articles By Author
...articles Gary Wright - 1 articles Gaylord Gill - 1 articles Gene Clements...

Magazine Articles By Gaylord Gill
My Library - Magazine Articles By Gaylord Gill My Library - Magazine Articles By...

...Gill My Library - Magazine Articles By Gaylord Gill 07/05/2014...

Magazine Articles By Category: Model Railroads and People
...2010-02 Page: 13 Author: Gaylord Gill Description: A behind-the-scene look at...

NASG Dispatch 2010-02 Articles
...Gauger Page: 13 Author: Gaylord Gill Category: Model Railroads and...

gazette
Railroading Books - Great Model Railroads 1995
...by the editor of the Narrow Gauge Gazette. The layout measures 19' x 21'. 5...

Magazine Articles By Al Askerberg
... Narrow Gauge And Short Line Gazette 2007-01/02 Page: 68 Category:...

Magazine Articles By Alan Mende
...in the Narrow Gauge and Short Line Gazette's November/December 1997 issue. Article covers how to...

Magazine Articles By Allen K. Littlefield
... Narrow Gauge And Short Line Gazette 2008-09/10 Page: 45 Category:...

Magazine Articles By Bob Brown
... Narrow Gauge And Short Line Gazette 2008-09/10 Page: 75 Category:...

... Narrow Gauge And Short Line Gazette 2007-01/02 Page: 92 Category:...

... Narrow Gauge And Short Line Gazette 2007-01/02 Page: 5 Category:...

...of the Narrow Gauge and Short Line Gazette.

Magazine Articles By Bob Poli
... Narrow Gauge And Short Line Gazette 2007-01/02 Page: 36 Category:...

Magazine Articles By Boone Morrison
... Narrow Gauge And Short Line Gazette 2007-01/02 Page: 76 Category:...

... Narrow Gauge And Short Line Gazette 2008-09/10 Page: 70 Category:...

... Narrow Gauge And Short Line Gazette 2008-11/12 Page: 76 Category:...

Magazine Articles By Bryan Nolan
... Narrow Gauge And Short Line Gazette 2007-01/02 Page: 70 Category:...

Magazine Articles By Charlie Getz
... Narrow Gauge And Short Line Gazette 2008-09/10 Page: 86 Category:...

... Narrow Gauge And Short Line Gazette 2007-01/02 Page: 82 Category:...

Magazine Articles By Christopher Payne
... Narrow Gauge And Short Line Gazette 2007-01/02 Page: 30 Category:...

Magazine Articles By Dennis Ferguson
... Narrow Gauge And Short Line Gazette 2008-11/12 Page: 20 Category:...

Magazine Articles By Edward H. Cass
... Narrow Gauge And Short Line Gazette 2008-11/12 Page: 47 Category:...

... Narrow Gauge And Short Line Gazette 2008-09/10 Page: 53 Category:...

... Narrow Gauge And Short Line Gazette 2007-01/02 Page: 59 Category:...

Magazine Articles By Eric Bracher
... Narrow Gauge And Short Line Gazette 2008-11/12 Page: 44 Category:...

Magazine Articles By Gary Caviglia
... Narrow Gauge And Short Line Gazette 2008-11/12 Page: 56 Category:...

... Narrow Gauge And Short Line Gazette 2007-01/02 Page: 54 Category:...

... Narrow Gauge And Short Line Gazette 2008-09/10 Page: 50 Category:...

... Narrow Gauge And Short Line Gazette 2008-09/10 Page: 74 Category:...

Magazine Articles By George Konrad
... Narrow Gauge And Short Line Gazette 2008-11/12 Page: 39 Category:...

Magazine Articles By Harry W. Brunk
... Narrow Gauge And Short Line Gazette 2008-09/10 Page: 76 Category:...

... Narrow Gauge And Short Line Gazette 2008-11/12 Page: 72 Category:...

Magazine Articles By Irene Brown
... Narrow Gauge And Short Line Gazette 2008-09/10 Page: 54 Category:...

Magazine Articles By J.R. Dunlop
... Narrow Gauge And Short Line Gazette 2007-01/02 Page: 57 Category:...

Magazine Articles By Jack Burgess
... Narrow Gauge And Short Line Gazette 2008-11/12 Page: 69 Category:...

...follow-up article to the author's May/June 2006 Gazette article where he modeled the foundation of...

Magazine Articles By Jeff Scherb
... Narrow Gauge And Short Line Gazette 2007-01/02 Page: 40 Category:...

... Narrow Gauge And Short Line Gazette 2008-11/12 Page: 51 Category:...

Magazine Articles By Jerry L. Martin
... Narrow Gauge And Short Line Gazette 2008-11/12 Page: 36 Category:...

Magazine Articles By Jim Gore
... Narrow Gauge And Short Line Gazette 2008-11/12 Page: 28 Category:...

Magazine Articles By Jim Vail
... Narrow Gauge And Short Line Gazette 2008-09/10 Page: 80 Category:...

... Narrow Gauge And Short Line Gazette 2007-01/02 Page: 86 Category:...

... Narrow Gauge And Short Line Gazette 2008-11/12 Page: 85 Category:...

Magazine Articles By John K. Landis
... Narrow Gauge And Short Line Gazette 2008-09/10 Page: 20 Category:...

Magazine Articles By John Morrison
... Narrow Gauge And Short Line Gazette 2008-09/10 Page: 38 Category:...

Magazine Articles By John S. Midgley
... Narrow Gauge And Short Line Gazette 2008-09/10 Page: 56 Category:...

... Narrow Gauge And Short Line Gazette 2008-11/12 Page: 82 Category:...

Magazine Articles By Ken Lunders
... Narrow Gauge And Short Line Gazette 2007-01/02 Page: 26 Category:...

Magazine Articles By Mallory Hope Ferrell
... Narrow Gauge And Short Line Gazette 2007-01/02 Page: 62 Category:...

... Narrow Gauge And Short Line Gazette 2008-11/12 Page: 62 Category:...

... Narrow Gauge And Short Line Gazette 2008-09/10 Page: 64 Category:...

Magazine Articles By Robert D. Bailey
... Narrow Gauge And Short Line Gazette 2007-01/02 Page: 50 Category:...

... Narrow Gauge And Short Line Gazette 2008-11/12 Page: 32 Category:...

... Narrow Gauge And Short Line Gazette 2008-09/10 Page: 35 Category:...

Magazine Articles By Robert Susanka
... Narrow Gauge And Short Line Gazette 2007-01/02 Page: 20 Category:...

Magazine Articles By Rodger Gredvig
...design that was published in the NGSL Gazette in 1995. Includes dimensioned drawings and model...

Magazine Articles By Russ Watson
...issue of the Narrow Gauge and Shortline Gazette. Although freelanced, it is models the D&RGW...

Magazine Articles By Steve Harris
... Narrow Gauge And Short Line Gazette 2008-09/10 Page: 28 Category:...

Magazine Articles By Terence F. Harper
... Narrow Gauge And Short Line Gazette 2008-11/12 Page: 26 Category:...

Magazine Articles By Category: Automobiles
... Narrow Gauge And Short Line Gazette 2008-11/12 Page: 39 Author:...

Magazine Articles By Category: Dioramas
... Narrow Gauge And Short Line Gazette 2007-01/02 Page: 30 Author:...

Magazine Articles By Category: Freight Cars - Boxcars
... Narrow Gauge And Short Line Gazette 2007-01/02 Page: 57 Author:...

Magazine Articles By Category: Freight Cars - Gondolas
... Narrow Gauge And Short Line Gazette 2007-01/02 Page: 59 Author:...

Magazine Articles By Category: Freight Cars - Tank Cars
... Narrow Gauge And Short Line Gazette 2007-01/02 Page: 36 Author:...

Magazine Articles By Category: Layout Construction
... Narrow Gauge And Short Line Gazette 2008-09/10 Page: 28 Author:...

... Narrow Gauge And Short Line Gazette 2007-01/02 Page: 76 Author:...

...connectors for a portable layout. Train Set Gazette Magazine: Railroad Model Craftsman 2012-01...

Magazine Articles By Category: Layouts - G
...of the Narrow Gauge and Short Line Gazette. The Woodland Railway Magazine: Garden...

Magazine Articles By Category: Layouts - HO - Small
... Narrow Gauge And Short Line Gazette 2007-01/02 Page: 20 Author:...

Magazine Articles By Category: Layouts - Large Scale
... Narrow Gauge And Short Line Gazette 2008-09/10 Page: 20 Author:...

Magazine Articles By Category: Layouts - O
... Narrow Gauge And Short Line Gazette 2008-11/12 Page: 20 Author:...

Magazine Articles By Category: Live Steam
... Narrow Gauge And Short Line Gazette 2007-01/02 Page: 5 Author:...

Magazine Articles By Category: Locomotives - Diesel
... Narrow Gauge And Short Line Gazette 2008-11/12 Page: 47 Author:...

... Narrow Gauge And Short Line Gazette 2008-09/10 Page: 75 Author:...

... Narrow Gauge And Short Line Gazette 2008-09/10 Page: 53 Author:...

Magazine Articles By Category: Locomotives - Other
... Narrow Gauge And Short Line Gazette 2008-09/10 Page: 45 Author:...

Magazine Articles By Category: Locomotives - Steam
... Narrow Gauge And Short Line Gazette 2008-11/12 Page: 26 Author:...

... Narrow Gauge And Short Line Gazette 2007-01/02 Page: 68 Author:...

... Narrow Gauge And Short Line Gazette 2007-01/02 Page: 40 Author:...

... Narrow Gauge And Short Line Gazette 2008-09/10 Page: 38 Author:...

... Narrow Gauge And Short Line Gazette 2008-11/12 Page: 56 Author:...

... Narrow Gauge And Short Line Gazette 2007-01/02 Page: 54 Author:...

Magazine Articles By Category: M.O.W. Equipment
... Narrow Gauge And Short Line Gazette 2008-11/12 Page: 44 Author:...

Magazine Articles By Category: Model Railroad Manufacturers
... Narrow Gauge And Short Line Gazette 2008-11/12 Page: 85 Author:...

...his club's experiences so far. Train Set Gazette Magazine: Railroad Model Craftsman 2009-01...

Magazine Articles By Category: Model Railroads and People
... Narrow Gauge And Short Line Gazette 2007-01/02 Page: 92 Author:...

... Narrow Gauge And Short Line Gazette 2007-01/02 Page: 82 Author:...

... Narrow Gauge And Short Line Gazette 2008-09/10 Page: 86 Author:...

Magazine Articles By Category: Railroads
... Narrow Gauge And Short Line Gazette 2008-09/10 Page: 54 Author:...

... Narrow Gauge And Short Line Gazette 2007-01/02 Page: 62 Author:...

... Narrow Gauge And Short Line Gazette 2008-09/10 Page: 56 Author:...

... Narrow Gauge And Short Line Gazette 2008-11/12 Page: 51 Author:...

... Narrow Gauge And Short Line Gazette 2008-11/12 Page: 62 Author:...

... Narrow Gauge And Short Line Gazette 2008-09/10 Page: 64 Author:...

Magazine Articles By Category: Structures - Depots/Stations/Yards
... Narrow Gauge And Short Line Gazette 2008-09/10 Page: 76 Author:...

... Narrow Gauge And Short Line Gazette 2008-11/12 Page: 32 Author:...

... Narrow Gauge And Short Line Gazette 2008-09/10 Page: 35 Author:...

... Narrow Gauge And Short Line Gazette 2008-09/10 Page: 50 Author:...

... Narrow Gauge And Short Line Gazette 2008-09/10 Page: 74 Author:...

Magazine Articles By Category: Structures - Engine Servicing
...issue of the Narrow Gauge and Shortline Gazette. Although freelanced, it is models the D&RGW...

... Narrow Gauge And Short Line Gazette 2007-01/02 Page: 86 Author:...

... Narrow Gauge And Short Line Gazette 2008-11/12 Page: 36 Author:...

Magazine Articles By Category: Structures - Industrial
...design that was published in the NGSL Gazette in 1995. Includes dimensioned drawings and model...

... Narrow Gauge And Short Line Gazette 2008-11/12 Page: 28 Author:...

... Narrow Gauge And Short Line Gazette 2008-11/12 Page: 72 Author:...

... Narrow Gauge And Short Line Gazette 2007-01/02 Page: 70 Author:...

Magazine Articles By Category: Structures - Towns/Cities
... Narrow Gauge And Short Line Gazette 2007-01/02 Page: 50 Author:...

... Narrow Gauge And Short Line Gazette 2008-09/10 Page: 80 Author:...

... Narrow Gauge And Short Line Gazette 2008-11/12 Page: 82 Author:...

Magazine Articles By Category: Structures - Track-side Details
... Narrow Gauge And Short Line Gazette 2008-11/12 Page: 76 Author:...

... Narrow Gauge And Short Line Gazette 2008-11/12 Page: 69 Author:...

...follow-up article to the author's May/June 2006 Gazette article where he modeled the foundation of...

Magazine Articles By Category: Tools
... Narrow Gauge And Short Line Gazette 2008-09/10 Page: 70 Author:...

Magazine Articles By Category: Track
... Narrow Gauge And Short Line Gazette 2007-01/02 Page: 26 Author:...

...in the Narrow Gauge and Short Line Gazette's November/December 1997 issue. Article covers how to...

Magazine Articles By Issue
...Railroading N-Scale Narrow Gauge And Short Line Gazette NASG Dispatch NMRA Bulletin O Scale Trains...

Magazine Issue for Narrow Gauge And Short Line Gazette
...Issue for Narrow Gauge And Short Line Gazette My Library - Magazine Issue for Narrow...

...Issue for Narrow Gauge And Short Line Gazette 07/05/2014 2007-01/02...

Garden Railways 2009-04 Articles
...of the Narrow Gauge and Short Line Gazette. Tools! Page: 58 Author:...

N-Scale 2000-03/04 Articles
...design that was published in the NGSL Gazette in 1995. Includes dimensioned drawings and model...

Narrow Gauge And Short Line Gazette 2007-01/02 Articles
...Library - Narrow Gauge And Short Line Gazette 2007-01/02 Articles My Library - Narrow Gauge...

...Library - Narrow Gauge And Short Line Gazette 2007-01/02 Articles...

Narrow Gauge And Short Line Gazette 2008-09/10 Articles
...Library - Narrow Gauge And Short Line Gazette 2008-09/10 Articles My Library - Narrow Gauge...

...Library - Narrow Gauge And Short Line Gazette 2008-09/10 Articles...

Narrow Gauge And Short Line Gazette 2008-11/12 Articles
...Library - Narrow Gauge And Short Line Gazette 2008-11/12 Articles My Library - Narrow Gauge...

...Library - Narrow Gauge And Short Line Gazette 2008-11/12 Articles...

...follow-up article to the author's May/June 2006 Gazette article where he modeled the foundation of...

Railroad Model Craftsman 2007-10 Articles
...issue of the Narrow Gauge and Shortline Gazette. Although freelanced, it is models the D&RGW...

Railroad Model Craftsman 2009-01 Articles
...used to make a campfire. Train Set Gazette Page: 66 Category: Model...

Railroad Model Craftsman 2010-07 Articles
...in the Narrow Gauge and Short Line Gazette's November/December 1997 issue. Article covers how to...

Railroad Model Craftsman 2012-01 Articles
...made. Includes many construction photos. Train Set Gazette Page: 55 Category: Layout...

Magazine Articles for G Scale
... Narrow Gauge And Short Line Gazette 2008-11/12 Page: 39 Author:...

...of the Narrow Gauge and Short Line Gazette. The Woodland Railway Magazine: Garden...

Magazine Articles for HO Scale
... Narrow Gauge And Short Line Gazette 2008-09/10 Page: 76 Author:...

... Narrow Gauge And Short Line Gazette 2007-01/02 Page: 50 Author:...

... Narrow Gauge And Short Line Gazette 2008-11/12 Page: 69 Author:...

...follow-up article to the author's May/June 2006 Gazette article where he modeled the foundation of...

Magazine Articles for HOn3 Scale
... Narrow Gauge And Short Line Gazette 2008-09/10 Page: 28 Author:...

... Narrow Gauge And Short Line Gazette 2008-11/12 Page: 44 Author:...

... Narrow Gauge And Short Line Gazette 2007-01/02 Page: 20 Author:...

Magazine Articles for HOn30 Scale
... Narrow Gauge And Short Line Gazette 2007-01/02 Page: 26 Author:...

Magazine Articles for Large Scale Scale
... Narrow Gauge And Short Line Gazette 2007-01/02 Page: 36 Author:...

... Narrow Gauge And Short Line Gazette 2008-09/10 Page: 38 Author:...

... Narrow Gauge And Short Line Gazette 2008-09/10 Page: 20 Author:...

... Narrow Gauge And Short Line Gazette 2007-01/02 Page: 30 Author:...

Magazine Articles for N Scale
... Narrow Gauge And Short Line Gazette 2008-11/12 Page: 32 Author:...

... Narrow Gauge And Short Line Gazette 2008-09/10 Page: 35 Author:...

...design that was published in the NGSL Gazette in 1995. Includes dimensioned drawings and model...

Magazine Articles for O Scale
...issue of the Narrow Gauge and Shortline Gazette. Although freelanced, it is models the D&RGW...

... Narrow Gauge And Short Line Gazette 2008-11/12 Page: 36 Author:...

... Narrow Gauge And Short Line Gazette 2008-11/12 Page: 28 Author:...

... Narrow Gauge And Short Line Gazette 2008-11/12 Page: 76 Author:...

... Narrow Gauge And Short Line Gazette 2007-01/02 Page: 70 Author:...

Magazine Articles for On3 Scale
... Narrow Gauge And Short Line Gazette 2008-09/10 Page: 75 Author:...

... Narrow Gauge And Short Line Gazette 2008-11/12 Page: 20 Author:...

... Narrow Gauge And Short Line Gazette 2007-01/02 Page: 76 Author:...

... Narrow Gauge And Short Line Gazette 2008-09/10 Page: 70 Author:...

Magazine Articles for On30 Scale
... Narrow Gauge And Short Line Gazette 2007-01/02 Page: 68 Author:...

... Narrow Gauge And Short Line Gazette 2008-09/10 Page: 45 Author:...

gb&w
Railroading Books - Steam Locomotives Cyclopedia Volume 1
... SP 2-6-0 Class M21 46 GB&W 2-6-0 47 PRR 2-8-0 Class H1...

gclaser
Structures - Dog Houses
...The photo on the right shows the GCLaser dog houses kit. The plan is...

ge
Research - PRR Diesel Locomotives
...Fairbanks-Morse Company "G" General Electric ("GE") These are the second letter...

Prototype Railroads
... SD70M-2 GE Evolution Series...

...AC-traction SD70ACe and the DC-traction SD70M-2. GE builds the Evolution Series ES44AC and ES44DC.

Magazine Articles By Andy Sperandeo
...build and paint a Rail Power Products GE C32-8. Includes model and prototype photos. Dinner...

Magazine Articles By David L. Waddington
...- Electric Description: This article describes GE's smallest of these types of engines. It...

Magazine Articles By Don James
...Description: The author used a Bachmann GE 70-tonner for this project. The article covers...

Magazine Articles By Eric Neubauer, Ken Goslett
...roster, prototype photos, and scale drawings. The GE Dash 8-40C(W) Magazine: Railroad Model...

Magazine Articles By Gerry Evans
...Building and the Smoky Mountain Model Works GE 77-tonner engine. Both are new kits Trainstuff...

Magazine Articles By J. Harold Geissel
...Geissel 07/05/2014 GE 44-tonner Magazine: Model Railroader 1978-09...

Magazine Articles By Jim Kelly
...Description: Contains additional information about the GE 44-tonner described in the other articles listed...

Magazine Articles By Ron Bearden
...Converting a 3-axle EMD sideframe to a GE sideframe, as part of placing a Bachmann...

Magazine Articles By Scott Lupia
...list. No scaled drawings. Kitbashing an Erie-Lackwanna GE U36C Magazine: Railroad Model Craftsman...

Magazine Articles By Trevor Marshall
...accompany the text which also covers the GE 70-ton engines used by the railroad. The...

Magazine Articles By Category: Locomotives - Diesel
...Description: Contains additional information about the GE 44-tonner described in the other articles listed...

...Converting a 3-axle EMD sideframe to a GE sideframe, as part of placing a Bachmann...

...build and paint a Rail Power Products GE C32-8. Includes model and prototype photos. Denver...

...FT demonstrator as they appeared in 1939. GE 44-tonner Magazine: Model Railroader 1978-09...

...and several model photos. Kitbashing an Erie-Lackwanna GE U36C Magazine: Railroad Model Craftsman...

...Description: The author used a Bachmann GE 70-tonner for this project. The article covers...

...20 Author: George Melvin The GE Dash 8-40C(W) Magazine: Railroad Model...

Magazine Articles By Category: Locomotives - Electric
...L. Waddington Description: This article describes GE's smallest of these types of engines. It...

Magazine Articles By Category: Railroads
...accompany the text which also covers the GE 70-ton engines used by the railroad. The...

Magazine Articles By Category: Structures
...Building and the Smoky Mountain Model Works GE 77-tonner engine. Both are new kits Published...

Model Railroader 1977-02 Articles
...- Electric Description: This article describes GE's smallest of these types of engines. It...

Model Railroader 1978-09 Articles
...Articles 07/05/2014 GE 44-tonner Page: 80 Author:...

...Description: Contains additional information about the GE 44-tonner described in the other articles listed...

Model Railroader 1990-02 Articles
...build and paint a Rail Power Products GE C32-8. Includes model and prototype photos.

N-Scale 2005-07/08 Articles
...Converting a 3-axle EMD sideframe to a GE sideframe, as part of placing a Bachmann...

NASG Dispatch 2009-10 Articles
...Building and the Smoky Mountain Model Works GE 77-tonner engine. Both are new kits

Railroad Model Craftsman 1991-01 Articles
...be placed in a real-world boxcar. The GE Dash 8-40C(W) Page: 80 Author:...

Railroad Model Craftsman 2007-10 Articles
...accompany the text which also covers the GE 70-ton engines used by the railroad. The...

Railroad Model Craftsman 2008-11 Articles
...Description: The author used a Bachmann GE 70-tonner for this project. The article covers...

Railroad Model Craftsman 2010-03 Articles
...model photos are included. Kitbashing an Erie-Lackwanna GE U36C Page: 53 Author:...

Magazine Articles for HO Scale
...build and paint a Rail Power Products GE C32-8. Includes model and prototype photos. Dean...

...Description: The author used a Bachmann GE 70-tonner for this project. The article covers...

Magazine Articles for N Scale
...Converting a 3-axle EMD sideframe to a GE sideframe, as part of placing a Bachmann...

...list. No scaled drawings. Kitbashing an Erie-Lackwanna GE U36C Magazine: Railroad Model Craftsman...

Magazine Articles for S Scale
...Building and the Smoky Mountain Model Works GE 77-tonner engine. Both are new kits PRR's...

gear
N-scale Equipment - Arnold S2 - Coupler Conversion
...two screws in each wheel assembly. The gear cover comes off and the Rapido coupler...

...coupler halves in place before replacing the gear cover plate. It takes a bit of...

N-scale Equipment - Arnold S2 - Motor Conversion
...I placed a bag over the worm gear to catch it coming off the motor....

N-scale Equipment - Arnold S2 - Pilot Conversion
...needs to be cut off from the gear box cover. And this photo shows what...

N-scale Equipment - Con-Cor 4-8-4 - Mechanical Problems
...a serious mechanical problem with its running gear. The side rods fall out and bind...

N-scale Equipment - Life-Like SW9 - DCC Conversion
...getting in the way of the worm gear at the front of the engine. These...

N-scale Equipment - Life-Like SW9 - Disassembly
...how to take the trucks apart. The wheel-and-gear assembly can be removed from the outer...

...plastic shell open enough to have the wheel-and-gear assembly come out. You have to push...

...simply falls apart once removed. Luckily the gear assembly stays together! And here is a...

S-scale Couplers - Proto Max Couplers
...that the mounting holes on their draft gear box are just a hair too far...

S-scale Couplers - Sergent Couplers - Old Design
...and removed the coupler from the draft gear box itself. The Sergent coupler fits perfectly....

S-scale Couplers - Sergent Couplers - New Design S
... John Degnan's Gear Box In...

...to be used with John Degnan's draft gear box' self-centering spring (this is optional; you...

...is optional; you can use John's draft gear box without the self-centering spring). John is...

...Model Works to produce the new draft gear box for S-scale. This is what is...

...couplers do not come with a draft gear box, but the Kadee S/On3 ones are...

...clears the opening of the Kadee draft gear box. The coupler moves freely without resistance,...

Equipment - PRR FA-2/FB-2 Cab Units
... 03/09/2013 Installing the "low" gear. Remotor 08/26/2013 Replacing the...

Equipment - PRR FA-2/FB-2 Cab Units - Model Information
...several of the gears inside the truck gear box. Since I ordered the "scale" version,...

Equipment - PRR FA-2/FB-2 Cab Units - Wobbly Units
...up the lock nut that holds the gear tower on the frame plate. Of course,...

...implemented by a small spring in the gear tower under the wheels (you can see...

...seated in a small hole in the gear tower halves, and pop right out). However,...

...up flush with the top of the gear tower, which is shown here in the...

...the side frame assembly back on the gear tower (and did the same adjustment to...

Equipment - PRR FA-2/FB-2 Cab Units - Regearing
...mentioned that I may have a low gear and high gear unit. I decided to...

...may have a low gear and high gear unit. I decided to order 4 of...

...of the "low" gears. To replace the gear you pretty much have to disassemble the...

...removed the bottom cover plate of the gear tower, removed the wheels, disconnected the electrical...

...wires from the tower, and removed the gear tower itself by removing the lock nut...

...on top. To actually get to the gear, you have to remove the two screws...

...other. You can see the original "high" gear in the tower half just below the...

...tower half just below the new "low" gear. This next photo shows them side by...

...shows them side by side. The "low" gear has one extra winding on it as...

...on it as compared to the "high" gear. That's it! There are two small brass...

...need to be removed from the old gear. The harder part is getting the universal...

...the two brass bushings on the "low" gear and re-installing the plastic joint. I pushed...

...and one side flat. Insert the new gear and manipulate the bushings so that the...

Equipment - PRR FM Flat Car - Coupler Conversion
...Walthers HO-scale ProtoMax coupler. The ProtoMax draft gear box is not compatible with the S-scale...

...to use some spare Kadee S-scale draft gear boxes, which, as you can see in...

...I decided to just make the draft gear box shorter. That has no impact on...

Equipment - PRR H21a Hopper - Construction: Conclusion
...out of 0.020". The external brake gear needs to line up with the gear...

...gear needs to line up with the gear on the "inside" of the model....

Equipment - PRR H21a Hopper - Construction: Frame
...of the center sill. Before the brake gear is installed and while I still had...

...lifetime! This completes the frame assembly. Brake Gear (part 1) External Reference:...

Equipment - B&O M53 Box Car - Construction: Adding Details
...next step was to install the brake gear. The parts needed for this section are...

Equipment - B&O M53 Box Car - Construction: Painting
...hole is 1/8". The Proto Max draft gear box doesn't fit in the provided space....

Equipment - PRR N5c Cabin Car - Construction: Wheels and Couplers
...10/10/2010 The kit comes with two draft gear boxes for the couplers. One is shown...

Equipment - PRR NW2 Switcher - Convert To Scale
...the plastic cover off of the metal gear box. I inserted a pair of curved...

...plastic cover snaps off of the metal gear box. The plastic cover can then be...

... At this point the wheels and gear box are fully exposed. The wheels come...

...fall into their slots on the metal gear box. Do one at a time. I...

...of them with the slot in the gear box and then pressed it partially into...

Equipment - PRR NW2 Switcher - ProtoMax Couplers
...the screw from crushing through the draft gear box. I completed the work by painting...

Equipment - PRR RS-1 Road Switcher - Construction: Completion
...clearance I had above the rear truck gear box tower. I cut a piece of...

Equipment - PRR RS-1 Road Switcher - Construction: Impressions
...single sheet of metal to which two gear towers are mounted. A motor is screwed...

...joints connect the motor's shafts to the gear towers. Electrical pickup is provided by...

...contact with the side panels of the truck/gear tower. Each side panel is electrically insulated...

...set of wires is connected to one truck/gear tower. Testing the unit for electrical continuity,...

The PRR Chartiers Branch - Progress Report - 2013-09 Report
...and some repair items for their fishing gear. Smitty built this small shop himself when...

Railroading Books - Detailing Freight Cars
...knuckle springs, and what is cushion draft gear. 3 22 Brake Gear Prototype...

...draft gear. 3 22 Brake Gear Prototype brakes, modeling brakes, brakes on boxcars,...

Railroading Books - Maintaining & Repairing Your Scale Model Trains
...how to pre-wear-out gears, how to spot gear problems, how to clean the actual motor,...

...to lubricate the engines, how to spot gear problems, and how to do electrical and...

Railroading Books - Steam Locomotives Cyclopedia Volume 1
...air brake and compressor piping, power reverse gear, tenders, stokers, oil-burning equipment, running gear, and...

...reverse gear, tenders, stokers, oil-burning equipment, running gear, and valve gear. Each are covered with...

...stokers, oil-burning equipment, running gear, and valve gear. Each are covered with detail diagrams and/or...

Magazine Articles By Bob Fink
...spreadsheet for calculating locomotive motor RPM's and gear ratios to limit the engines upper speed....

Magazine Articles By Bob Walker
...the Virginia Midland 4-6-0 covers the running gear, boiler, and cab. Includes diagrams and close-up...

Magazine Articles By Ron Bearden
...parts list, and detailed instructions. SW1200 Worm Gear Replacement Magazine: N-Scale 2003-07/08 Page:...

...Shows how to replace the plastic worm gear on a Life-Like SW1200 with a brass...

...a Life-Like SW1200 with a brass worm gear from Kato. Includes a drawing of the...

Magazine Articles By Todd Brown
...video taping your layout. It discusses essential gear, dealing with location and lighting, setting your...

Magazine Articles By Category: Locomotives - Diesel
...and implementing working Mars light. SW1200 Worm Gear Replacement Magazine: N-Scale 2003-07/08 Page:...

...Shows how to replace the plastic worm gear on a Life-Like SW1200 with a brass...

...a Life-Like SW1200 with a brass worm gear from Kato. Includes a drawing of the...

Magazine Articles By Category: Locomotives - Steam
...the Virginia Midland 4-6-0 covers the running gear, boiler, and cab. Includes diagrams and close-up...

Magazine Articles By Category: Model Railroads and Computers
...spreadsheet for calculating locomotive motor RPM's and gear ratios to limit the engines upper speed....

Magazine Articles By Category: Photography & Videography
...video taping your layout. It discusses essential gear, dealing with location and lighting, setting your...

Model Railroader 1990-12 Articles
...spreadsheet for calculating locomotive motor RPM's and gear ratios to limit the engines upper speed....

Model Railroader 2006-03 Articles
...video taping your layout. It discusses essential gear, dealing with location and lighting, setting your...

N-Scale 2003-07/08 Articles
...established scenery. Includes many photos. SW1200 Worm Gear Replacement Page: 70 Author:...

...Shows how to replace the plastic worm gear on a Life-Like SW1200 with a brass...

...a Life-Like SW1200 with a brass worm gear from Kato. Includes a drawing of the...

Railroad Model Craftsman 1980-12 Articles
...the Virginia Midland 4-6-0 covers the running gear, boiler, and cab. Includes diagrams and close-up...

Magazine Articles for N Scale
...parts list, and detailed instructions. SW1200 Worm Gear Replacement Magazine: N-Scale 2003-07/08 Page:...

...Shows how to replace the plastic worm gear on a Life-Like SW1200 with a brass...

...a Life-Like SW1200 with a brass worm gear from Kato. Includes a drawing of the...

Magazine Articles for On3 Scale
...the Virginia Midland 4-6-0 covers the running gear, boiler, and cab. Includes diagrams and close-up...

Oil Pump Jack
...carefully to get smooth movement from the gear reduction box. After a while mine started...

...by a 12-volt power supply. The motor's gear box can be quite noisy. Slowing it...

Scratch-built Turntable - Diamond Scale Motor Kit
...uses such terminology as "oil-filled bearings", "pinion gear", and "bull gear". Unless you are a...

...as "oil-filled bearings", "pinion gear", and "bull gear". Unless you are a mechanical engineer, these...

...my workbench. Then I pressed the medium-sized gear onto the metal bearing until the gear...

...gear onto the metal bearing until the gear hit the case. This is an extremely...

...Do something similar with the other medium-sized gear and matching metal bearing. This second gear...

...gear and matching metal bearing. This second gear doesn't need to go down the metal...

...it needs to mesh with the small gear molded onto the first medium-sized gear that...

...small gear molded onto the first medium-sized gear that was just installed. Leave just a...

...motor has been mounted. The large plastic gear slides onto the long metal bearing. One...

...Note that one end of the plastic gear has a flat bottom molded into it....

...molded into it. This end of the gear needs to be on the motor's shaft...

...motor. The open ended side of the gear needs to be up. This is shown...

...photo. Be sure not to press the gear down so far that it rubs on...

...inserting the gears. First install the medium-sized gear that sits closest to the case (the...

...first one we put together above). This gear will mesh with the small gear mounted...

...This gear will mesh with the small gear mounted to the motor shaft. Then install...

...motor shaft. Then install the second medium-sized gear. Before inserting the large gear into the...

...second medium-sized gear. Before inserting the large gear into the case, we first need to...

...hole in the case. Insert the large gear into the metal ring, with the long...

...motor's side. The photo below shows the gear being inserted. Push it all the way...

gearbox
Magazine Articles By Gordon Odegard
...author describes how he made the bearings, gearbox, drive train, and cylinders for the locomotive....

Magazine Articles By Jeff Johnston
...as built, but adding an NWSL metal gearbox and a Sagami motor with flywheels really...

Magazine Articles By Noel Holley
...brake rigging, pantograph, headlight, and motor with gearbox for the working rotating blades. Includes model...

Magazine Articles By Category: Locomotives - Electric
...brake rigging, pantograph, headlight, and motor with gearbox for the working rotating blades. Includes model...

Magazine Articles By Category: Locomotives - Steam
...author describes how he made the bearings, gearbox, drive train, and cylinders for the locomotive....

...as built, but adding an NWSL metal gearbox and a Sagami motor with flywheels really...

Model Railroader 1983-01 Articles
...author describes how he made the bearings, gearbox, drive train, and cylinders for the locomotive....

Railroad Model Craftsman 1974-02 Articles
...brake rigging, pantograph, headlight, and motor with gearbox for the working rotating blades. Includes model...

Railroad Model Craftsman 1991-01 Articles
...as built, but adding an NWSL metal gearbox and a Sagami motor with flywheels really...

Magazine Articles for HO Scale
...author describes how he made the bearings, gearbox, drive train, and cylinders for the locomotive....

...brake rigging, pantograph, headlight, and motor with gearbox for the working rotating blades. Includes model...

...as built, but adding an NWSL metal gearbox and a Sagami motor with flywheels really...

Oil Pump Jack
...brass wire, but I found that the gearbox caused the jack head to jerk a...

geared
Tools - Paints
...These were the best enamel paints, specifically geared toward railroad colors. The Polly Scale brand...

Equipment - PRR H21a Hopper - Construction: Interior
...out of the bottom. Everything inside is geared toward guiding the coal toward the doors....

Railroading Books - Automating Your Model Train Layout
...Unique Environments Simple sound control modules (mostly geared toward the Lionel audience). The animation focuses...

Magazine Articles By Terence F. Harper
...07/05/2014 A Standard Gauge Baldwin Locomotive Works Geared Locomotive Magazine: Narrow Gauge And...

Magazine Articles By Category: Locomotives - Steam
...kit. A Standard Gauge Baldwin Locomotive Works Geared Locomotive Magazine: Narrow Gauge And...

Narrow Gauge And Short Line Gazette 2008-11/12 Articles
...completed. A Standard Gauge Baldwin Locomotive Works Geared Locomotive Page: 26 Author:...

gearing
DCC - S-CAB
...Stanton Drive, which incorporates a motor and gearing into a truck assembly). Up until June...

Equipment - PRR FA-2/FB-2 Cab Units - Model Information
...one of my A-units had the "low" gearing and the other the "high" gearing. Don't...

..."low" gearing and the other the "high" gearing. Don't ask me why! They ran at...

Equipment - PRR FA-2/FB-2 Cab Units - Wobbly Units
...However, that caused the axles with their gearing to sit too low. I built a...

Equipment - PRR FA-2/FB-2 Cab Units - Regearing
...trade-off I found was that the new gearing is incredibly loud. Your mileage may vary,...

...A unit, and I removed all the gearing from it. It is now just a...

Magazine Articles By Ron Bearden
...part of the Kato Pocket line. S2 Gearing Improvement Magazine: N-Scale 2002-11/12 Page:...

Magazine Articles By Category: Locomotives - Diesel
...& Western Railway S-1 diesel locomotives. S2 Gearing Improvement Magazine: N-Scale 2002-11/12 Page:...

N-Scale 2002-11/12 Articles
...Description: Feather River canyon photograph S2 Gearing Improvement Page: 62 Author:...

Magazine Articles for N Scale
...build a working N-scale roller coaster. S2 Gearing Improvement Magazine: N-Scale 2002-11/12 Page:...

Scratch-built Turntable - Diamond Scale Motor Kit
...be an enjoyable project. The motor and gearing is somewhat noisy, but the instructions say...

gears
DCC - S-CAB
...such as the efficiency of the locomotive's gears and motor, the speed and duration of...

Electronics Projects - Modifying Tortoises
...the PC board. There are series of gears to help reduce the speed of the...

N-scale Equipment - Arnold S2 - Motor Conversion
...motor while you pull off the worm gears. The Arnold model itself comes with two...

...the body, frame, and motor with worm gears. This is an important picture. I actually...

...to re-assemble the new motor and worm gears. The worm gears are really extracted springs...

...new motor and worm gears. The worm gears are really extracted springs - an ingenious...

...with the motor for taking the worm gears off of the motor - very important....

...The following photos shows how the worm gears are placed on the new motor. The...

...I removed the wheels, inspected the worm gears, and replaced the wheels. After finishing the...

N-scale Equipment - Atlas RS-1 - Coupler Conversion
...like a daunting task with all those gears in there. It is actually quite simple,...

...the frame half that doesn't have the gears. The frame half will almost pop loose....

...with the other metal frame half. The gears can fall off, so keep an eye...

...keep an eye on them. All the gears go on in one direction, so don't...

N-scale Equipment - Atlas RS-1 - Disassembly
...been separated, the motor, flywheels, and worm gears can easily be removed. The two trucks...

N-scale Equipment - Con-Cor 4-8-4 - Mechanical Problems
...is a side-effect of the motor and gears getting worn in. Two of the three...

N-scale Equipment - Kato 2-8-2 - DCC Conversion
...been reinserted into the frame. Getting the gears to line up and connect again was...

N-scale Equipment - Kato 2-8-2 - Introduction
...mechanism, solid performance, and quiet motor and gears. On the downside, it doesn't pull much...

N-scale Equipment - Life-Like SW9 - Disassembly
...plastic cover on the trucks, hiding the gears, is to face toward the front and...

N-scale Equipment - Life-Like SW9 - Introduction
...has an article about replacing the worm gears of this model.

N-scale Equipment - Rivarossi 2-8-8-2 - DCC Conversion
...a bit. To gain access to the gears, remove the screw at the front of...

...metal parts. The locomotive runs but its gears make a lot of noise. I had...

Equipment - PRR FA-2/FB-2 Cab Units - Model Information
...the motor, shaft, and several of the gears inside the truck gear box. Since I...

Equipment - PRR FA-2/FB-2 Cab Units - DCC Conversion
...should be sufficient for the motors and gears in the American Models' engines. I have...

Equipment - PRR FA-2/FB-2 Cab Units - Regearing
...decided to order 4 of the "low" gears (just in case I wanted to replace...

...close up of one of the "low" gears. To replace the gear you pretty much...

...half. I put all the various plastic gears on that one half, which makes it...

Equipment - PRR RS-1 Road Switcher - Electrical Short
...the dimensions of the bottom plate. The gears that are mounted to the axles of...

Railroading Books - Maintaining & Repairing Your Scale Model Trains
...to lubricate the engines, how to pre-wear-out gears, how to spot gear problems, how to...

Magazine Articles By Brian Hutchinson
... 07/05/2014 Industrial Gears and Machinery Parts Magazine: Model...

Magazine Articles By Charles J. Devine
...such as pipes, telephone poles, scrap metal, gears, steel plates, storage tanks, plate girders, lumber,...

Magazine Articles By Ron Bearden
...Arnold/Rivarrossi S2 apparently has problems with their gears breaking. This article covers how these problems...

...will also reduce the noise of the gears. Shay Improvement Magazine: N-Scale 2006-07/08...

Magazine Articles By Rudy Kouhoupt
...Steam Description: This installment covers valve gears, accompanied by close-up prototype photos of the...

...of the Stephenson, Walschaerts, and Baker valve gears. Basics of Steam: External Details Part 5...

Magazine Articles By Category: Freight Car Loads
...such as pipes, telephone poles, scrap metal, gears, steel plates, storage tanks, plate girders, lumber,...

Magazine Articles By Category: Locomotives - Diesel
...Arnold/Rivarrossi S2 apparently has problems with their gears breaking. This article covers how these problems...

...will also reduce the noise of the gears. Santa Fe Alco PA-1 and PB-1 Passenger...

Magazine Articles By Category: Locomotives - Steam
...Kouhoupt Description: This installment covers valve gears, accompanied by close-up prototype photos of the...

...of the Stephenson, Walschaerts, and Baker valve gears. Basics of Steam: External Details Part 5...

Magazine Articles By Category: Structures - Industrial
...This installment covers more country elevators. Industrial Gears and Machinery Parts Magazine: Model...

Model Railroader 2000-02 Articles
... Layout Design Scale: N Industrial Gears and Machinery Parts Page: 119 Author:...

N-Scale 2002-11/12 Articles
...Arnold/Rivarrossi S2 apparently has problems with their gears breaking. This article covers how these problems...

...will also reduce the noise of the gears. End-of-Train Protection Page: 64 Author:...

N Scale Railroading 2003-05/06 Articles
...such as pipes, telephone poles, scrap metal, gears, steel plates, storage tanks, plate girders, lumber,...

Railroad Model Craftsman 1972-09 Articles
...Steam Description: This installment covers valve gears, accompanied by close-up prototype photos of the...

...of the Stephenson, Walschaerts, and Baker valve gears. Laurel Line Electric Locomotives Page: 43...

Magazine Articles for N Scale
...such as pipes, telephone poles, scrap metal, gears, steel plates, storage tanks, plate girders, lumber,...

...Arnold/Rivarrossi S2 apparently has problems with their gears breaking. This article covers how these problems...

...will also reduce the noise of the gears. Scale Ballast Magazine: N-Scale 1999-09/10...

My Library - Photo Albums - Southern Forest Heritage Museum
...is basically an automobile engine with two gears. It pulls a short car that can...

Scratch-built Turntable - Diamond Scale Motor Kit
...remaining bit of plastic. There are four gears included in the small parts bag. There...

...the hole of the two medium-sized gears. Eventually these two bearings will "ride" in...

...in the plastic case. To get the gears to sit in the correct spot on...

...case as a guide to install the gears. I placed the metal bearing in one...

...a small clearing between the two medium-sized gears so that they do not rub against...

...to determine the relative position of the gears on their bearing rods. Final installation of...

...their bearing rods. Final installation of the gears will be done after the motor has...

...these. The smallest of the four plastic gears needs to be mounted onto the shaft...

...has the motor installed, start inserting the gears. First install the medium-sized gear that sits...

...way down until it reaches the other gears. The two case halves can now be...

...shaft by hand to see if the gears are movable. If not, see where the...

gee
Railroading Books - Great Model Railroads 1998
...photographed by Bob Werre. 68 Kay Gee Canyon Line 76 The Hessel &...

geep
Magazine Articles By George Melvin
...of prototype photos. GP40: The First 645 Geep Part 4 Magazine: Model Railroading...

...commuter service providers. GP40: The First 645 Geep Part 5 Magazine: Model Railroading...

...of prototype photos. GP40: The First 645 Geep Part 12 Magazine: Model Railroading...

...Penn Central GP40s. GP40: The First 645 Geep Part 21 Magazine: Model Railroading...

...Locomotives - Diesel GP40: The First 645 Geep Part 22 Magazine: Model Railroading...

...Locomotives - Diesel GP40: The First 645 Geep Part 23 Magazine: Model Railroading...

... Western Pacific GP40: The First 645 Geep Part 24 Magazine: Model Railroading...

Magazine Articles By Jim Boyd
...of the Central Vermont and Grand Trunk. Geep Kits Magazine: Railroad Model Craftsman...

Magazine Articles By Jim Hediger
...Palm PDA's to maintain your collection. EMD Geep Model Roundup Magazine: Model Railroader...

Magazine Articles By Category: Locomotives - Diesel
...this brief article about this locomotive. EMD Geep Model Roundup Magazine: Model Railroader...

...this issue is a "Bull Session" follow-up. Geep Kits Magazine: Railroad Model Craftsman...

...these in HO. GP40: The First 645 Geep Part 4 Magazine: Model Railroading...

...commuter service providers. GP40: The First 645 Geep Part 5 Magazine: Model Railroading...

...of prototype photos. GP40: The First 645 Geep Part 12 Magazine: Model Railroading...

...Penn Central GP40s. GP40: The First 645 Geep Part 21 Magazine: Model Railroading...

... George Melvin GP40: The First 645 Geep Part 22 Magazine: Model Railroading...

... George Melvin GP40: The First 645 Geep Part 23 Magazine: Model Railroading...

... Western Pacific GP40: The First 645 Geep Part 24 Magazine: Model Railroading...

Model Railroader 2002-12 Articles
...Track Description: Tools and methods. EMD Geep Model Roundup Page: 66 Author:...

Model Railroading 2000-11/12 Articles
...the traffic lights. GP40: The First 645 Geep Part 4 Page: 30 Author:...

Model Railroading 2000-12 Articles
... 07/05/2014 GP40: The First 645 Geep Part 5 Page: 20 Author:...

Model Railroading 2001-09 Articles
...two prototype photos. GP40: The First 645 Geep Part 12 Page: 20 Author:...

Model Railroading 2002-06 Articles
... 07/05/2014 GP40: The First 645 Geep Part 21 Page: 20 Author:...

Model Railroading 2002-07 Articles
... Layout Design GP40: The First 645 Geep Part 22 Page: 21 Author:...

Model Railroading 2002-08 Articles
... 07/05/2014 GP40: The First 645 Geep Part 23 Page: 22 Author:...

Model Railroading 2002-09 Articles
... 07/05/2014 GP40: The First 645 Geep Part 24 Page: 21 Author:...

Railroad Model Craftsman 2005-03 Articles
...Articles 07/05/2014 Geep Kits Page: 50 Author:...

geeps
Magazine Articles By Andy Sperandeo
...ATSF #293241 are included. Santa Fe Zebra-striped Geeps in HO Magazine: Model Railroader...

Magazine Articles By Category: Locomotives - Diesel
...models, including super-detailing work. Santa Fe Zebra-striped Geeps in HO Magazine: Model Railroader...

Model Railroader 1985-11 Articles
...trackplan, and many photos. Santa Fe Zebra-striped Geeps in HO Page: 134 Author:...

Magazine Articles for HO Scale
...during the post-WWII era. Santa Fe Zebra-striped Geeps in HO Magazine: Model Railroader...

Railroading Videos - The Pennsylvania Railroad
...Baldwin Centipedes, and Sharks, "F" units, early Geeps, GG-1’s, Alco RS-3’s, etc. Locations covered are:...

geiger
Magazine Articles By Author
...A. Clerke - 1 articles Doug Geiger - 12 articles Doug Kisala...

Magazine Articles By Doug Geiger
My Library - Magazine Articles By Doug Geiger My Library - Magazine Articles By Doug...

...My Library - Magazine Articles By Doug Geiger 07/05/2014 An...

Magazine Articles By Category: Automobiles
...Page: 68 Author: Doug Geiger Scale: HO Description: Includes prototype,...

Magazine Articles By Category: Layout Construction
...Page: 48 Author: Doug Geiger Scale: HO Description: Revisits the...

Magazine Articles By Category: Layouts - HO - Large
...Page: 38 Author: Doug Geiger Scale: HO Description: Fred Carlson's...

...Page: 48 Author: Doug Geiger Scale: HO Description: This installment...

Magazine Articles By Category: MRR Product Review
...Page: 18 Author: Doug Geiger Scale: HO Description: PBL released...

Magazine Articles By Category: Scenery - Streets
...Page: 27 Author: Doug Geiger Description: Using sand paper to model...

...Page: 48 Author: Doug Geiger Description: Asphalt. Modeling Streets and Roads...

...Page: 28 Author: Doug Geiger Description: Asphalt using Route 66's HO...

...Page: 30 Author: Doug Geiger Description: Concrete streets Modeling Streets and...

...Page: 42 Author: Doug Geiger Description: Concrete roads. Simulate the real...

...Page: 38 Author: Doug Geiger Description: Model construction, and prototype photos....

Magazine Articles By Category: Structures - Industrial
...Page: 46 Author: Doug Geiger Scale: HO Description: Taking several...

Model Railroading 2000-11/12 Articles
...Page: 38 Author: Doug Geiger Category: Layouts - HO -...

Model Railroading 2002-06 Articles
...Page: 27 Author: Doug Geiger Category: Scenery - Streets Description:...

Model Railroading 2002-07 Articles
...Page: 48 Author: Doug Geiger Category: Scenery - Streets Description:...

Model Railroading 2002-08 Articles
...Page: 28 Author: Doug Geiger Category: Scenery - Streets Description:...

...Page: 46 Author: Doug Geiger Category: Structures - Industrial Scale:...

Model Railroading 2002-09 Articles
...Page: 30 Author: Doug Geiger Category: Scenery - Streets Description:...

Model Railroading 2002-10 Articles
...Page: 38 Author: Doug Geiger Category: Scenery - Streets Description:...

Model Railroading 2002-11 Articles
...Page: 42 Author: Doug Geiger Category: Scenery - Streets Description:...

Model Railroading 2005-04 Articles
...Page: 18 Author: Doug Geiger Category: MRR Product Review Scale:...

Railroad Model Craftsman 1991-04 Articles
...Page: 48 Author: Doug Geiger Category: Layouts - HO -...

Railroad Model Craftsman 1991-07 Articles
...Page: 48 Author: Doug Geiger Category: Layout Construction Scale:...

Railroad Model Craftsman 1996-03 Articles
...Page: 68 Author: Doug Geiger Category: Automobiles Scale: HO...

Magazine Articles for HO Scale
...Page: 46 Author: Doug Geiger Category: Structures - Industrial Description:...

...Page: 68 Author: Doug Geiger Category: Automobiles Description: Includes...

...Page: 18 Author: Doug Geiger Category: MRR Product Review Description:...

...Page: 38 Author: Doug Geiger Category: Layouts - HO -...

...Page: 48 Author: Doug Geiger Category: Layout Construction Description:...

...Page: 48 Author: Doug Geiger Category: Layouts - HO -...

geissel
Magazine Articles By Author
...Koester - 2 articles J. Harold Geissel - 1 articles J.C. Myer...

Magazine Articles By J. Harold Geissel
...Library - Magazine Articles By J. Harold Geissel My Library - Magazine Articles By J....

...Library - Magazine Articles By J. Harold Geissel 07/05/2014 GE...

Magazine Articles By Category: Locomotives - Diesel
... 80 Author: J. Harold Geissel Description: A brief description of the...

Model Railroader 1978-09 Articles
... 80 Author: J. Harold Geissel Category: Locomotives - Diesel Description:...

gel
Equipment - B&O M53 Box Car - Construction: Painting
...the air hose is. Next, I used gel superglue to form a connection between the...

The PRR Chartiers Branch - Progress Report - 2013-06 Report
...06/19/2013 Last month I applied the gloss gel on the creek. This shot shows the...

...left half of the creek with the gel completely cured. I looks nice in the...

...applied Future furniture wax to protect the gel from becoming dull. I am going to...

...layer and then carefully worked the gloss gel around him. What spare time I have...

The PRR Chartiers Branch - Progress Report - 2014-01 Report
...helped. I used lots of superglue (the gel kind) to glue them all down. It...

Raiser Sharp Barber Shop
...Very carefully I put a drop of gel superglue on the inside corner of the...

gelder
Magazine Articles By Tom Bartley
...includes on Dick's friendship with Bob Van Gelder of South River Modelworks. More photos are...

Magazine Articles By Category: Layouts - HO - Large
...includes on Dick's friendship with Bob Van Gelder of South River Modelworks. More photos are...

Railroad Model Craftsman 2012-01 Articles
...includes on Dick's friendship with Bob Van Gelder of South River Modelworks. More photos are...

Magazine Articles for HO Scale
...includes on Dick's friendship with Bob Van Gelder of South River Modelworks. More photos are...

gene
Magazine Articles By Author
...articles Gaylord Gill - 1 articles Gene Clements - 2 articles Gene Deimling...

...articles Gene Clements - 2 articles Gene Deimling - 1 articles Geoff Hubbs...

Magazine Articles By Gene Clements
My Library - Magazine Articles By Gene Clements My Library - Magazine Articles By...

...Clements My Library - Magazine Articles By Gene Clements 07/05/2014...

Magazine Articles By Gene Deimling
My Library - Magazine Articles By Gene Deimling My Library - Magazine Articles By...

...Deimling My Library - Magazine Articles By Gene Deimling 07/05/2014...

Magazine Articles By Category: Freight Cars - Tank Cars
...2002-02 Page: 86 Author: Gene Deimling Scale: O Description: The...

Magazine Articles By Category: M.O.W. Equipment
...2007 Page: 24 Author: Gene Clements Scale: O Description: Heavy-lifting...

Magazine Articles By Category: Railroading
...2007 Page: 24 Author: Gene Clements Description: The author describes what...

O Scale Trains Magazine 32 May 2007 Articles
...Image Page: 24 Author: Gene Clements Category: Railroading Description:...

O Scale Trains Magazine 33 July 2007 Articles
...Image Page: 24 Author: Gene Clements Category: M.O.W. Equipment Scale:...

Railroad Model Craftsman 2002-02 Articles
...Car Page: 86 Author: Gene Deimling Category: Freight Cars -...

Magazine Articles for O Scale
...2002-02 Page: 86 Author: Gene Deimling Category: Freight Cars -...

...2007 Page: 24 Author: Gene Clements Category: M.O.W. Equipment Description:...

general
DCC - Digitrax Command Station Reset
...my throttle didn't like 4-digit addresses in general. I posted this message to one...

LED Lighting
...300 LEDs is not bright enough for general layout lighting. It barely registers when I...

Articles
...that section, was modified. Rolling Stock Articles General Rolling Stock Articles Aug. 27,...

Product Photos - Plastruct
...sheet material, as well as strips. In general, take the "scale" that they mention with...

Research
... Information about PRR freight cars PRR General Info 03/23/2013 General information...

...PRR General Info 03/23/2013 General information about the Pennsylvania Railroad. PRR Miscellaneous...

Research - PRR Diesel Locomotives
..."F" Fairbanks-Morse Company "G" General Electric ("GE") These are the...

Research - PRR General Info
Peter's Model Railroading - Research - PRR General Info Research - PRR General Info...

...- PRR General Info Research - PRR General Info 03/23/2013...

Research - PRR Steam Locomotives
... 11/24/2013 Class Names In general, steam locomotives were classified using the Whyte...

Prototype Railroads
...Caterpillar-owned EMD (no longer a division of General Motors), and General Electric Transportation. EMD...

...longer a division of General Motors), and General Electric Transportation. EMD builds the AC-traction...

Chartiers Branch
...was formed and where it stands today. General Information 12/26/2013 Overview of...

...of stops. Canonsburg 11/03/2012 General information about the town. Canonsburg Pottery...

...lumber mill. Washington 11/03/2012 General information about Washington, PA Engine Servicing Facility...

Chartiers Branch - General Information
Peter's Model Railroading - Chartiers Branch - General Information Chartiers Branch - General Information...

...Branch - General Information Chartiers Branch - General Information 12/26/2013...

...following trees can be found in the general area: bigtooth aspen, black walnut, american beech,...

Chartiers Branch - Track
...siding) 3.3 272'3" General Electric Co.; Bridgeville Glass Works; has P.C.&Y....

General Rolling Stock
Peter's Model Railroading - General Rolling Stock General Rolling Stock Coal Load...

Peter's Model Railroading - General Rolling Stock General Rolling Stock Coal Load 10/14/2011...

General Rolling Stock - Coal Load
Peter's Model Railroading - General Rolling Stock - Coal Load General Rolling...

...- General Rolling Stock - Coal Load General Rolling Stock - Coal Load...

General Rolling Stock - Containers
Peter's Model Railroading - General Rolling Stock - Containers General Rolling Stock...

...Railroading - General Rolling Stock - Containers General Rolling Stock - Containers...

General Rolling Stock - Coupler Gauge
Peter's Model Railroading - General Rolling Stock - Coupler Gauge General Rolling...

...- General Rolling Stock - Coupler Gauge General Rolling Stock - Coupler Gauge...

General Rolling Stock - Dragline Buckets Load
Peter's Model Railroading - General Rolling Stock - Dragline Buckets Load General...

...General Rolling Stock - Dragline Buckets Load General Rolling Stock - Dragline Buckets Load...

General Rolling Stock - Load of Crates
Peter's Model Railroading - General Rolling Stock - Load of Crates General...

...General Rolling Stock - Load of Crates General Rolling Stock - Load of Crates...

General Rolling Stock - Painting Wheels
Peter's Model Railroading - General Rolling Stock - Painting Wheels General Rolling...

...- General Rolling Stock - Painting Wheels General Rolling Stock - Painting Wheels...

General Rolling Stock - Power Generator Load
Peter's Model Railroading - General Rolling Stock - Power Generator Load General...

...General Rolling Stock - Power Generator Load General Rolling Stock - Power Generator Load...

General Rolling Stock - Steel Beam Load
Peter's Model Railroading - General Rolling Stock - Steel Beam Load General...

...General Rolling Stock - Steel Beam Load General Rolling Stock - Steel Beam Load...

General Rolling Stock - Vertical Engine Load
Peter's Model Railroading - General Rolling Stock - Vertical Engine Load General...

...General Rolling Stock - Vertical Engine Load General Rolling Stock - Vertical Engine Load...

General Rolling Stock - Wheel Cleaning
Peter's Model Railroading - General Rolling Stock - Wheel Cleaning General Rolling...

...- General Rolling Stock - Wheel Cleaning General Rolling Stock - Wheel Cleaning...

N-scale Equipment - Atlas GP7 - Introduction
...a 1,500 hp engine. They were considered general road switchers. The Pennsylvania Railroad had 66...

N-scale Equipment - Kato E8 - Disassembly
...a difference between the two runs in general, other than outward appearance). Next, hold the...

N-scale Equipment - Kato E8 - Introduction
...was built by EMD (Electro-Motive Division of General Motors). The Pennsylvania Railroad acquired these locomotives...

Scenery - Foreground Trees
...that you can find at nearly any general hobby or crafts store. I get mine...

Scenery - Scenery Base
...the cardboard webbing is, except for the general shapes, which now look like grass-covered rock...

The Hobby - Changing Modeling Scales
...drain on my time and energy. In general, interacting with fellow modelers is easy. There...

Tools - Small Tools
...This is a 6-inch contour gage by General (part #837). It is great for copying...

Trackwork - NJ Semaphore
...this block of track. Also included are general instructions. This sheet appears to be included...

Equipment - PRR FA-2/FB-2 Cab Units
...Units Prototype Information 10/23/2012 General and PRR-specific engine information. Model Information...

Equipment - PRR FM Flat Car - Construction: Conclusion
...learned a lot about scratch-building cars in general, so my skills are getting better. None...

Equipment - PRR GLa Hopper - Model Information
...a proportionately large number of hoppers, in general. Due to the cheer quantity of the...

Equipment - PRR H21a Hopper - Construction: Conclusion
...here. I really enjoy scratch-building in general, and I had a lot of fun...

Equipment - PRR NW2 Switcher
...Switcher Prototype Information 09/25/2012 General and PRR-specific engine information. Model Information...

Equipment - PRR NW2 Switcher - Motor Replacement
...club members discussed my problem and the general consensus seemed to be that there might...

Equipment - PRR RS-1 Road Switcher
...Switcher Prototype Information 09/27/2009 General and PRR-specific engine information. Model Information...

Equipment - PRR RS-1 Road Switcher - Construction: Impressions
...of the engine, the kits parts list, general instructions, where decals can be purchased, and...

Equipment - SHPX Tank Car - References
...10/14/2011 Wikipedia Tank Car General Tank Car Info American...

Equipment - PRR X37 Box Car - Construction
...work (but not the underbody work in general; more to come). The hand brake retainer...

Bear Creek & Eastern - Layout Design
...concrete track plan, I did have a general concept in mind. After I got most...

Bear Creek & Eastern - Progress Report - 2006-08 Report
...them together, and shaping them to the general shape I wanted for the spur (Micro...

Bear Creek & Eastern - Progress Report - 2008-02 Report
...piece of 1/4" plywood to fit the general track area. My conclusion was that the...

The PRR Chartiers Branch - Progress Report - 2008-12 Report
...Hayes Wheel Stops by Tomar Industries. In general I prefer these over bumpers at the...

The PRR Chartiers Branch - Progress Report - 2012-07 Report
...Here is an overall view of the general area. ( to next month's report... )

The PRR Chartiers Branch - Progress Report - 2012-11 Report
...received the above-mentioned books, I got a general idea of how these trees were made...

...the photo below was made using that general idea. The "leaves and branches" are from...

The PRR Chartiers Branch - Progress Report - 2014-02 Report
...material. There were unfilled patches, but in general I liked the look of it. So...

Railroading Books - 764 Helpful Hints for Model Railroaders
...1 2 Rolling Stock - General 2 7 Freight Cars 3...

...Trolley 6 21 Layouts - General 7 22 Track 8...

...Tools and Techniques 14 55 General Construction Aids 15 62 Miscellaneous

Railroading Books - Detailing Track
...product resources) are about O-scale. However, the general topics are applicable to any scale, if...

Railroading Books - Maintenance of Way Cyclopedia
...Page Title / Description 2 General Subject Index 9 The Track Section...

...decay, and wood grading. 551 The General Section Covers track-side and fixed tools and...

Railroading Books - Model Railroad Bridges & Trestles
...rivets, through truss nomenclature and typical proportions, general characteristics of truss bridges, top and knee...

Railroading Books - The Encyclopedia of Trains & Locomotives
...someone wanting to learn about railroading in general. Chapter Page Title / Description...

Drawings
...Railroad Technical & Historical Society PRR H21a General Arrangement Number: C-57368 Applies to H21, H21a....

...Railroad Technical & Historical Society PRR H21a General Arrangement (click image for larger view) Number:...

...Railroad Technical & Historical Society PRR H21a General Arrangement (click image for larger view) Number:...

Magazine Articles By Allan N. Houghton
...without actually having to buy it. GATX (General American Transportation Corp) leases equipment to railroads....

Magazine Articles By Bob Walker
...your own freight car and what the general steps might be. Scratchbuilding in Another Scale...

Magazine Articles By David Frost & Jerry Moyers
...1,000hp engines. The SW1000 was used for general yard duty, and the SW1001 was used...

Magazine Articles By David J. Vinci
...various parts, so it is a good general article on scratchbuild freight cars as well.

Magazine Articles By David L. Waddington
...Waddington 07/05/2014 General Electric 25-ton Steeplecab Magazine: Model...

Magazine Articles By Ed Freeman
...Description: Covers the S-2 switcher in general and the Boston & Maine in specific....

Magazine Articles By Eric Neubauer, Ken Goslett
...Goslett 07/05/2014 General Electric's Dash 8-40B Magazine: Railroad...

Magazine Articles By George Sebastian-Coleman
...George has switched to DCC and sound. General Electric's New AC6000CW Magazine: Model...

Magazine Articles By Jeff Madden
...sketches are provided to give ideas on general track designs one could use in a...

Magazine Articles By Jim Slaughter
...how he built a chlorine, acid, and general service tank cars. Includes model and prototype...

Magazine Articles By Mike Polsgrove
...DCC Description: This article discusses, in general, how to install lights in locomotives, and...

Magazine Articles By Preston Cook
...communicate within the company and with the general public how the full-sized models operated and...

Magazine Articles By Rich Picariello
...of the GP38-2 engine. Kansas City Southern General Electric AC4400CW Magazine: Model Railroading...

Magazine Articles By Robert Bennett
...China & Sheepscot layout. They include a general store, a gas station, a garage, a...

Magazine Articles By Robert E. Mohowski
... Prototype photos and scale drawings. The General Store at Crowl, Pennsylvania Magazine:...

...The author describes his visit to the general grocery store that sat right at the...

Magazine Articles By Robert L. Hundman
...how he built a model of the general store at Nella, North Carolina. Realistic Trees...

Magazine Articles By Todd Sullivan
...those standards. It is also a good general article on how to lay track (flex...

Magazine Articles By Tom Piccirillo
... O Description: The author (the general manager of Micro-Mark) takes a simple Atlas...

Magazine Articles By Tony Koester
...F-series, and Fairbanks-Morse's Erie-builts, Trainmasters, H-15-44, and General Electric's U-boats and Dash 8's. A handy...

Magazine Articles By Will Jacobs
...parts list, and completed models photos. Pomona General Store Magazine: N-Scale 2001-05/06 Page:...

...The author describes how he built this general store. Includes drawings, prototype photo, and lots...

Magazine Articles By Category: DCC
...Polsgrove Description: This article discusses, in general, how to install lights in locomotives, and...

Magazine Articles By Category: Freight Cars
...your own freight car and what the general steps might be. Simplified Lettering for Burlington...

Magazine Articles By Category: Freight Cars - Flat Cars
...various parts, so it is a good general article on scratchbuild freight cars as well....

Magazine Articles By Category: Freight Cars - Tank Cars
...how he built a chlorine, acid, and general service tank cars. Includes model and prototype...

...as well as a parts list. Modern General-service Tank Cars Magazine: Model Railroader...

Magazine Articles By Category: Layout Design
...sketches are provided to give ideas on general track designs one could use in a...

Magazine Articles By Category: Locomotives - Diesel
...1,000hp engines. The SW1000 was used for general yard duty, and the SW1001 was used...

...of partially dismantled GP7 and GP9 locomotives. General Electric's Dash 8-40B Magazine: Railroad...

...and roster of B39-8E and Dash 8-40B. General Electric's New AC6000CW Magazine: Model...

...GP35 and Athearn F-unit. Kansas City Southern General Electric AC4400CW Magazine: Model Railroading...

...F-series, and Fairbanks-Morse's Erie-builts, Trainmasters, H-15-44, and General Electric's U-boats and Dash 8's. A handy...

...Description: Covers the S-2 switcher in general and the Boston & Maine in specific....

...without actually having to buy it. GATX (General American Transportation Corp) leases equipment to railroads....

Magazine Articles By Category: Locomotives - Electric
...rotating blades. Includes model and prototype photos. General Electric 25-ton Steeplecab Magazine: Model...

Magazine Articles By Category: Railroads
...communicate within the company and with the general public how the full-sized models operated and...

Magazine Articles By Category: Structures
...China & Sheepscot layout. They include a general store, a gas station, a garage, a...

...how he built a model of the general store at Nella, North Carolina. Really Obvious...

Magazine Articles By Category: Structures - Depots/Stations/Yards
...manufacturers to create this large Victorian-style passenger station/general headquarters building. Rochester Junction Station and Storage...

... O Description: The author (the general manager of Micro-Mark) takes a simple Atlas...

Magazine Articles By Category: Structures - Towns/Cities
...construction photos are shown as well. Pomona General Store Magazine: N-Scale 2001-05/06 Page:...

...The author describes how he built this general store. Includes drawings, prototype photo, and lots...

Magazine Articles By Category: Structures - Track-side Details
...which is a 20-ton coal house. The General Store at Crowl, Pennsylvania Magazine:...

...The author describes his visit to the general grocery store that sat right at the...

Magazine Articles By Category: Track
...those standards. It is also a good general article on how to lay track (flex...

Model Railroader 1977-02 Articles
...Articles 07/05/2014 General Electric 25-ton Steeplecab Page: 72 Author:...

Model Railroader 1992-05 Articles
...without actually having to buy it. GATX (General American Transportation Corp) leases equipment to railroads....

Model Railroader 1996-09 Articles
...silk-screen to simulate window and door screens. General Electric's New AC6000CW Page: 78 Author:...

Model Railroader 2005-02 Articles
... O Description: The author (the general manager of Micro-Mark) takes a simple Atlas...

...DCC Description: This article discusses, in general, how to install lights in locomotives, and...

Model Railroader 2005-11 Articles
...F-series, and Fairbanks-Morse's Erie-builts, Trainmasters, H-15-44, and General Electric's U-boats and Dash 8's. A handy...

Model Railroading 2005-11 Articles
...the J.B. Hunt trailers. Kansas City Southern General Electric AC4400CW Page: 46 Author:...

N-Scale 2001-05/06 Articles
... 07/05/2014 Pomona General Store Page: 26 Author:...

...The author describes how he built this general store. Includes drawings, prototype photo, and lots...

N-Scale 2005-11/12 Articles
...how he built a model of the general store at Nella, North Carolina. Soo Line...

NASG Dispatch 2005-06 Articles
...sketches are provided to give ideas on general track designs one could use in a...

Railroad Model Craftsman 1991-11 Articles
...how he built a chlorine, acid, and general service tank cars. Includes model and prototype...

Railroad Model Craftsman 1994-01 Articles
...kit into a two-family, three story residence. General Electric's Dash 8-40B Page: 71 Author:...

Railroad Model Craftsman 1996-05 Articles
...1,000hp engines. The SW1000 was used for general yard duty, and the SW1001 was used...

Railroad Model Craftsman 2006-12 Articles
...construction photos, and a parts list. The General Store at Crowl, Pennsylvania Page: 83...

...The author describes his visit to the general grocery store that sat right at the...

Railroad Model Craftsman 2007-04 Articles
...your own freight car and what the general steps might be. Modeling the State Belt...

Railroad Model Craftsman 2007-12 Articles
...communicate within the company and with the general public how the full-sized models operated and...

...Description: Covers the S-2 switcher in general and the Boston & Maine in specific....

Railroad Model Craftsman 2010-03 Articles
...China & Sheepscot layout. They include a general store, a gas station, a garage, a...

The Keystone Modeler 75 Autumn 2010 Articles
...various parts, so it is a good general article on scratchbuild freight cars as well....

...those standards. It is also a good general article on how to lay track (flex...

Magazine Articles for HO Scale
...those standards. It is also a good general article on how to lay track (flex...

...how he built a chlorine, acid, and general service tank cars. Includes model and prototype...

...Description: Covers the S-2 switcher in general and the Boston & Maine in specific....

...without actually having to buy it. GATX (General American Transportation Corp) leases equipment to railroads....

...manufacturers to create this large Victorian-style passenger station/general headquarters building. RMC/Dremel Kitbashing Award Magazine:...

...various parts, so it is a good general article on scratchbuild freight cars as well....

Magazine Articles for N Scale
...part of the Kato Pocket line. Pomona General Store Magazine: N-Scale 2001-05/06 Page:...

...The author describes how he built this general store. Includes drawings, prototype photo, and lots...

...how he built a model of the general store at Nella, North Carolina. Puget Sound...

Magazine Articles for O Scale
...- Depots/Stations/Yards Description: The author (the general manager of Micro-Mark) takes a simple Atlas...

Magazine Articles for On30 Scale
...China & Sheepscot layout. They include a general store, a gas station, a garage, a...

Magazine Articles for S Scale
...sketches are provided to give ideas on general track designs one could use in a...

Sitemap by Page Titles
... November 03, 2012 - General Information December 26, 2013 -...

... Introduction November 29, 2012 General Rolling Stock August 27, 2013...

... May 11, 2014 - PRR General Info March 23, 2013 -...

Sitemap by Last-modified Date
...26, 2013 - Chartiers Branch - General Information December 22, 2013 - Canonsburg...

...Scale Card August 27, 2013 - General Rolling Stock - General Rolling Stock...

...- General Rolling Stock - General Rolling Stock - Dragline Buckets Load August...

...- Remotor July 21, 2013 - General Rolling Stock - Power Generator Load June...

...- References - Research - PRR General Info March 21, 2013 - General...

...General Info March 21, 2013 - General Rolling Stock - Vertical Engine Load March...

...Parts Identification April 21, 2012 - General Rolling Stock - Containers - The...

...- Residence October 14, 2011 - General Rolling Stock - Coal Load -...

...2010-08 Report August 22, 2010 - General Rolling Stock - Steel Beam Load July...

...Trestle Extension June 14, 2010 - General Rolling Stock - Load of Crates June...

...Construction: Underbody February 21, 2010 - General Rolling Stock - Wheel Cleaning January 18,...

...2008-11 Report November 03, 2008 - General Rolling Stock - Coupler Gauge October 29,...

...Modeling Table October 02, 2005 - General Rolling Stock - Painting Wheels -...

general-purpose
Scratch-built Turntable - Base
...adhesive & sealant. This is a nice general-purpose glue that dries clear, but shiny. When...

general-service
Magazine Articles By Harry Hilliard
... 07/05/2014 Modern General-service Tank Cars Magazine: Model Railroader...

Magazine Articles By Jim Panza & Ed Crist
...is made up of high quality, free-running, general-service boxcars capable of running all of the...

Magazine Articles By Category: Freight Cars - Boxcars
...is made up of high quality, free-running, general-service boxcars capable of running all of the...

Magazine Articles By Category: Freight Cars - Tank Cars
...as well as a parts list. Modern General-service Tank Cars Magazine: Model Railroader...

Model Railroader 1990-02 Articles
...some prototype photos of the area. Modern General-service Tank Cars Page: 104 Author:...

Railroad Model Craftsman 1980-07 Articles
...is made up of high quality, free-running, general-service boxcars capable of running all of the...

generally
Electronics Projects - LEDs
...current is 20mA (i.e. 0.020A), which is generally stated on the package as well. Finally,...

Hand-laying Track - 5. Laying Rail
...on the size of the wire bend. Generally, this is not visible ones everything is...

Product Photos - M.T.H.
...and they are fantastic. However, they are generally $4 to $6 each. So, when you...

General Rolling Stock - Wheel Cleaning
...take equipment to a show. It is generally a good idea to clean the...

N-scale Equipment - Atlas GP7 - Introduction
...for testing track, moving cars around, and generally reliable engines. I bought these in late...

Scenery - Foreground Trees
...full-strength Elmer's white glue (Glue All). I generally apply the glue on all branches where...

Tortoise Installation Ideas - Basic Tortoise Installation
...in the throwbar hole. I have also generally found the linkage rod supplied with the...

Trackwork - Ballasting Flextrack
...to use real-rock ballast, if possible. I generally do my ballasting before I do the...

Trackwork - Laying Flextrack
...you have a good start, they will generally slide in pretty easily. To give them...

Trackwork - Roadbed
...Scenics recommends their own Foam Tack Glue. Generally I find their products too expensive, but...

The PRR Chartiers Branch - Progress Report - 2010-08 Report
...such as raw umber, raw sienna, etc. Generally the flow of a creek will leave...

The PRR Chartiers Branch - Progress Report - 2008-07 Report
...3.5" strips, which are shown below. I generally don't do any glue-up work on my...

My Library - Photo Albums - Passenger Cars
...of photos partially show passengers (because I generally don't take photos of passenger cars), and...

...contain passenger cars. As stated above, I generally am not that interested in passenger cars,...

About S-scale
...structures. Also, the larger your modeling scale, generally the more expensive the hobby gets. The...

...than in N- or HO-scale. "S" is generally associated with the toy trains of American...

...run some their old American Flyer equipment. Generally, these people are caught between scale modeling...

...the American Flyer accessories, and they will generally use wheels with large flanges and the...

generate
N-scale Equipment - Arnold S2 - Motor Conversion
...the first one again, but it did generate an increase in heart rate! ;-) The...

Magazine Articles By Bob Fink
...Electronics Description: Using the computer to generate traffic switch lists, and creating text of...

Magazine Articles By Category: Electronics
...Fink Description: Using the computer to generate traffic switch lists, and creating text of...

Model Railroader 1991-03 Articles
...Electronics Description: Using the computer to generate traffic switch lists, and creating text of...

My Library - Photo Albums - Southern Forest Heritage Museum
...board, even though it was shorter, would generate more money for the mill because the...

generated
Painting - Paint Drawer
...There is a tremendous amount of dust generated, and MDF in particular is not good...

Tools - Key-chain Video Camera
...that when I played the .mov file generated by the camera on my Windows 7...

Magazine Articles By Jimi Banks
... 07/05/2014 Computer Generated Windows Magazine: N Scale Railroading...

Magazine Articles By Category: Structures - Towns/Cities
...A materials list is also included. Computer Generated Windows Magazine: N Scale Railroading...

N Scale Railroading 2002-03/04 Articles
... 07/05/2014 Computer Generated Windows Page: 44 Author:...

Magazine Articles for N Scale
...applying scenery base, and installing trees. Computer Generated Windows Magazine: N Scale Railroading...

generates
Trackwork - Roadbed
...with indoor latex paint. The ceiling tile generates a lot of dust if you even...

The PRR Chartiers Branch - Progress Report - 2008-12 Report
...MDF after it was installed. Ceiling tile generates a lot of dust. To cut down...

Deck Plate Girder Bridge - Abutments
...gentle and allows for delicate adjustments. It generates a lot of plaster dust. The brass...

generating
The PRR Chartiers Branch - Progress Report - 2008-12 Report
...protect it from moisture and to avoid generating more dust. The first section of roadbed...

generation
Magazine Articles By Keith Gutierrez
...a fast clock. The CTC-16e: The Next Generation of Command Control Part 1 Magazine:...

Magazine Articles By Category: Electronics
...in the article. The CTC-16e: The Next Generation of Command Control Part 1 Magazine:...

Model Railroader 1984-04 Articles
...1,500 volts DC. The CTC-16e: The Next Generation of Command Control Part 1 Page:...

Railroading Videos - The Pennsylvania Railroad
...of steam and the transition to first generation diesels. You'll see Decapods, Baldwin Centipedes, and...

generator
General Rolling Stock
...10/02/2005 How I paint wheels. Power Generator Load 07/21/2013 Building the...

General Rolling Stock - Power Generator Load
...Railroading - General Rolling Stock - Power Generator Load General Rolling Stock - Power Generator...

...Generator Load General Rolling Stock - Power Generator Load 07/21/2013...

...it for a minute or two. The generator itself fits in between the small protrusions....

...the superglue on the bottom of the generator and then pressed it into place. I...

...the cardboard to the bottom of the generator part. Next, I used Krylon Gray Primer...

Equipment - PRR FA-2/FB-2 Cab Units - Prototype Information
...were also lengthened to add a steam generator needed for passenger service. The big problem...

Railroading Books - Steam Locomotives Cyclopedia Volume 1
...location, smokebox fittings, boiler-mounted accessories, headlight and generator, bell, whistle, safety valves, piping, water supply,...

Magazine Articles By Don W. Hansen
...add-on throttle. New topics include: diesel sound generator, and onboard steam sound. Symposium on Electronics...

Magazine Articles By John S. Atkinson
...a Mars light flasher, using the random-sequence generator from the February issue of this magazine...

...a night flasher, audio amplifier and noise generator, a pseudo-random-sequence generator, and an oscillator circuit.

...audio amplifier and noise generator, a pseudo-random-sequence generator, and an oscillator circuit.

Magazine Articles By Category: Electronics
...a night flasher, audio amplifier and noise generator, a pseudo-random-sequence generator, and an oscillator circuit....

...audio amplifier and noise generator, a pseudo-random-sequence generator, and an oscillator circuit. Symposium on Electronics...

...add-on throttle. New topics include: diesel sound generator, and onboard steam sound. Symposium on Electronics...

...a Mars light flasher, using the random-sequence generator from the February issue of this magazine...

Model Railroader 1983-01 Articles
...add-on throttle. New topics include: diesel sound generator, and onboard steam sound. Broadway Posters for...

Model Railroader 1990-02 Articles
...a night flasher, audio amplifier and noise generator, a pseudo-random-sequence generator, and an oscillator circuit....

...audio amplifier and noise generator, a pseudo-random-sequence generator, and an oscillator circuit. HO Steam Kit...

Model Railroader 1990-05 Articles
...a Mars light flasher, using the random-sequence generator from the February issue of this magazine...

My Library - Photo Albums - Southern Forest Heritage Museum
...photos). I believe this is the steam generator, but I may be wrong (I was...

About pmrr.org
...FRSProductMgr - article content manager and generator (one of my company's software products). FRSLibrary...

Sitemap by Page Titles
... October 02, 2005 - Power Generator Load July 21, 2013 -...

Sitemap by Last-modified Date
...- General Rolling Stock - Power Generator Load June 22, 2013 - Prototype...

generators
General Rolling Stock - Power Generator Load
...kit you receive. There are two power generators in one package. Two units comfortably fit...

...of the part. It is on both generators, so I presume there is a flaw...

...online for what color these types of generators might be painted. It seemed to vary...

...small to be used in S-scale. The generators make for an interesting load on one...

...cars. Here is a photo of the generators on a PRR FM flat car. I...

General Rolling Stock - Vertical Engine Load
...mills, factories, etc. for their electrical power generators. This photo shows the parts included in...

generic
Scenery
...Latest attempt at making high-quality foreground trees. Generic Background Trees 03/13/2011 How...

...How I make some basic background trees. Generic Foreground Trees 11/15/2011 How...

Scenery - Conifer Trees
...article shows my latest technique for making generic conifer trees. It is based on the...

Scenery - Generic Background Trees
Peter's Model Railroading - Scenery - Generic Background Trees Scenery - Generic Background Trees...

...Scenery - Generic Background Trees Scenery - Generic Background Trees...

...This article shows how I make some generic background trees (filler trees, really). Materials needed...

Scenery - Generic Foreground Trees
Peter's Model Railroading - Scenery - Generic Foreground Trees Scenery - Generic Foreground Trees...

...Scenery - Generic Foreground Trees Scenery - Generic Foreground Trees...

...yet. This article describes how I build generic, larger foreground trees for my layout. Again,...

Scenery - Scenery Base
...it. The natural "lumpiness" makes for great generic rock surfaces. However, one day I was...

Equipment - PRR H21a Hopper - Construction: Frame
...use since the author describes building a generic two-bay World War I hopper. I was...

Railroading Books - Modelling Trees Part One
...just want to have a couple of generic trees, these books are probably overkill. I...

Railroading Books - Modelling Trees Part Two
...painting, color charts, foliage, static fibers, cone-shaped generic and background conifers, rubberised horsehair. 33...

Magazine Articles By Allan Crowe
...system, but tried to keep it as generic as possible.

Magazine Articles By Charles Moslander
... Instructions, photo, and drawings of a generic shed building. Prefabricated Streets Magazine:...

Magazine Articles By Gordon Odegard
...author describes how he built this freelanced generic interlocking tower for the Kalmbach club layout....

Magazine Articles By Tom Bailey
... 07/05/2014 Ann Arbor 2480: Customizing a Generic Model for a Specific Prototype Part 1...

...boiler jacket. Ann Arbor 2480: Customizing a Generic Model for a Specific Prototype Pt II...

Magazine Articles By Category: DCC
...system, but tried to keep it as generic as possible. How Compatible is DCC? Magazine:...

Magazine Articles By Category: Locomotives - Steam
...detail it. Ann Arbor 2480: Customizing a Generic Model for a Specific Prototype Part 1...

...boiler jacket. Ann Arbor 2480: Customizing a Generic Model for a Specific Prototype Pt II...

Magazine Articles By Category: Structures
... Instructions, photo, and drawings of a generic shed building. Oiler's Ready-Mix & Building Supply...

Magazine Articles By Category: Structures - Track-side Details
...author describes how he built this freelanced generic interlocking tower for the Kalmbach club layout....

Model Railroader 1988-01 Articles
...author describes how he built this freelanced generic interlocking tower for the Kalmbach club layout....

N-Scale 2002-10/11 Articles
... Instructions, photo, and drawings of a generic shed building. Kids and Model Railroading Page:...

Railroad Model Craftsman 2006-08 Articles
...track diagrams. Ann Arbor 2480: Customizing a Generic Model for a Specific Prototype Part 1...

Railroad Model Craftsman 2006-09 Articles
...installed it. Ann Arbor 2480: Customizing a Generic Model for a Specific Prototype Pt II...

Railroad Model Craftsman 2007-02 Articles
...system, but tried to keep it as generic as possible. Large Projects Page: 88...

Magazine Articles for HO Scale
...a campfire. Ann Arbor 2480: Customizing a Generic Model for a Specific Prototype Part 1...

...boiler jacket. Ann Arbor 2480: Customizing a Generic Model for a Specific Prototype Pt II...

...author describes how he built this freelanced generic interlocking tower for the Kalmbach club layout....

Magazine Articles for N Scale
... Instructions, photo, and drawings of a generic shed building. N Scale Express Car Magazine:...

About pmrr.org
...this site (of course, you can do generic Web searching by replacing all of the...

Sitemap by Page Titles
... January 18, 2014 - Generic Background Trees March 13, 2011...

... March 13, 2011 - Generic Foreground Trees November 15, 2011...

Sitemap by Last-modified Date
...November 15, 2011 - Scenery - Generic Foreground Trees - The PRR Chartiers...

...March 13, 2011 - Scenery - Generic Background Trees March 09, 2011 -...

generous
Tools - Router Table
...being glued together. The top measures a generous 35-1/2" wide by 23-1/2" deep (90 x...

Magazine Articles By Andy Sperandeo
...layout. It is a walk-in layout with generous curves, beautiful structures, and nicely painted backdrops....

Magazine Articles By Category: Layouts - O
...layout. It is a walk-in layout with generous curves, beautiful structures, and nicely painted backdrops....

Model Railroader 1987-10 Articles
...layout. It is a walk-in layout with generous curves, beautiful structures, and nicely painted backdrops....

Magazine Articles for O Scale
...layout. It is a walk-in layout with generous curves, beautiful structures, and nicely painted backdrops....

genesee
Chartiers Branch - Historical Timeline
...2008 External Reference: Genesee & Wyoming, Inc....

...Ohio Central Railroad System was bought by Genesee & Wyoming, Inc. in 2008. This is...

genesis
Railroading Books - Model Railroad Planning 2004
...Page Title / Description 6 Genesis of an Issue 8 Free-lancing a...

Magazine Articles By Robert Smaus
...Makes for great urban tight-quarter modeling. Improving Genesis Cab Interiors Magazine: Model Railroader...

Magazine Articles By Category: Locomotives - Diesel
...on Con-Cor SW1500 and Kato SD45. Improving Genesis Cab Interiors Magazine: Model Railroader...

Model Railroader 2002-10 Articles
...wood, styrene, and foam insulation spray. Improving Genesis Cab Interiors Page: 86 Author:...

Magazine Articles for HO Scale
...it ride lower and improve operations. Improving Genesis Cab Interiors Magazine: Model Railroader...

genoa
Railroading Books - Steam Locomotives Cyclopedia Volume 1
...of 1873 100 V&T 4-4-0 Reno, Genoa, Inyo 102 PRR 4-4-0 Classes D12,...

genre
About pmrr.org
...Bob Dylan, etc. In the heavy metal genre, I like Metallica, Savatage, and (relatively new...

gentle
Electronics Projects - Modifying Tortoises
...with the prototype. They are also more gentle on trackwork, which is important when you...

N-scale Equipment - Life-Like SW9 - Coupler Conversion
...couplers were glued in place. With some gentle prodding using a sharp knife I was...

Equipment - PRR RS-1 Road Switcher - Construction: Adding Details
...a pair of needlenose pliers, and the gentle curves are made by bending the wire...

...had figured out how to make the gentle curve and how to attach the handrail...

P & C Railroad Version 3 - Progress Report - 2002-01 Report
...it dries it softens and makes for gentle waves. I also mixed some light blue...

The PRR Chartiers Branch - Progress Report - 2013-04 Report
...to store some cars. To make the gentle easement curve, I used some strips of...

Deck Plate Girder Bridge - Abutments
...of material. The other one is more gentle and allows for delicate adjustments. It generates...

gentleman
Chartiers Branch - Canonsburg Passenger Station
...was enclosed. This is according to a gentleman who informed me that his uncle and...

Smitty's Rod-n-Reel
...comes in the kit. Smitty is the gentleman on the right, and one of his...

gentlemen
Structures - Buddy's Café
...mid-morning coffee. In this HO-scale model two gentlemen are taking a break and discussing today's...

gently
Hand-laying Track - 2. Preparing and Applying Ballast
...I can use it again. I also gently blow on the area to remove any...

N-scale Equipment - Atlas RS-1 - Disassembly
...with a small pair of pliers and gently pull on the them to spread the...

...may get caught in the frame. Again, gently spread the running boards out and away...

N-scale Equipment - Con-Cor 4-8-4 - Wheel Cleaning
...removing the wheels from the truck, I gently polished the wheel thread until it shined....

N-scale Equipment - Kato 2-8-2 - Disassembly
...loose. The cab can be removed by gently prying the sides of the cab out...

N-scale Equipment - Kato Passenger Cars - Coupler Conversion
...coupler off of the truck body by gently widening the truck side frames. Cut the...

Scenery - Conifer Trees
...I am twisting the tree armature while gently dropping the short pieces of twine on...

Trackwork - Laying Flextrack
...use the razor saw, upside down, and gently cut between the second and third tie,...

Equipment - PRR FM Flat Car - Construction: Stake Pockets
...that. I used an emery board to gently file this curve to the top and...

Equipment - PRR RS-1 Road Switcher - Construction: Adding Details
...the stanchion. Using a fine file, I gently shaped a curved top to the stanchion,...

...where the walkway holes were drilled and gently move the styrene stanchions in place. I...

Equipment - PRR X29 Box Car - Kit Construction
...them up with my breath and then gently bent them down. Only one of the...

Railroading Books - Great Model Railroads 1994
...focusing on switching at Shippensburg. 92 Gently Through the Looking Glass Lee Vande Visse...

geodesic
Magazine Articles By Joel Bragdon
...Bragdon 07/05/2014 Geodesic Foam Scenery Part 2 Magazine:...

...castings, painting the rocks, and installing them. Geodesic Foam Scenery Part Three Magazine:...

Magazine Articles By Category: Scenery - Mountains
...shows how to create shallow-profile rock cuts. Geodesic Foam Scenery Part 2 Magazine:...

...castings, painting the rocks, and installing them. Geodesic Foam Scenery Part Three Magazine:...

Railroad Model Craftsman 1996-02 Articles
...yet it was such a small change. Geodesic Foam Scenery Part 2 Page: 75...

Railroad Model Craftsman 1996-03 Articles
...using wood and styrene; see this link: Geodesic Foam Scenery Part Three Page: 83...

geoff
Railroading Books - Great Model Railroads 2000
...the 1950's Northwestern U.S., as modeled by Geoff Nott of Australia. He describes how he...

Magazine Articles By Author
...Douglas Nelson - 3 articles Dr. Geoff Bunza - 1 articles Dr. Nicholas...

...articles Gene Deimling - 1 articles Geoff Hubbs - 1 articles Geoffrey M....

Magazine Articles By Dr. Geoff Bunza
My Library - Magazine Articles By Dr. Geoff Bunza My Library - Magazine Articles By...

...My Library - Magazine Articles By Dr. Geoff Bunza 07/05/2014...

Magazine Articles By Geoff Hubbs
My Library - Magazine Articles By Geoff Hubbs My Library - Magazine Articles By...

...Hubbs My Library - Magazine Articles By Geoff Hubbs 07/05/2014...

Magazine Articles By Category: Electronics
...Page: 73 Author: Dr. Geoff Bunza Description: After introducing the concept...

Magazine Articles By Category: Freight Cars - Flat Cars
...1979-03 Page: 75 Author: Geoff Hubbs Scale: HO Description: The...

Railroad Model Craftsman 1979-03 Articles
...Flatcar Page: 75 Author: Geoff Hubbs Category: Freight Cars -...

Railroad Model Craftsman 2014-05 Articles
...Page: 73 Author: Dr. Geoff Bunza Category: Electronics Description:...

Magazine Articles for HO Scale
...1979-03 Page: 75 Author: Geoff Hubbs Category: Freight Cars -...

geoffrey
Magazine Articles By Author
...articles Geoff Hubbs - 1 articles Geoffrey M. Graeber, MD - 1 articles...

Magazine Articles By Geoffrey M. Graeber, MD
My Library - Magazine Articles By Geoffrey M. Graeber, MD My Library - Magazine...

...MD My Library - Magazine Articles By Geoffrey M. Graeber, MD...

Magazine Articles By Category: Freight Cars - Refrigerator Cars
...Fall Page: 13 Author: Geoffrey M. Graeber, MD Scale: S Description:...

1:64 Modeling Guide 2008 Fall Articles
...2 Page: 13 Author: Geoffrey M. Graeber, MD Category: Freight...

Magazine Articles for S Scale
...Fall Page: 13 Author: Geoffrey M. Graeber, MD Category: Freight...

geological
Magazine Articles By Tony Koester
...the Rocky Mountains form? Includes a full geological map of the U.S. and Canada. Starrucca...

Magazine Articles By Category: Scenery - Mountains
...the Rocky Mountains form? Includes a full geological map of the U.S. and Canada. Rubber...

Model Railroader 2004-09 Articles
...the Rocky Mountains form? Includes a full geological map of the U.S. and Canada. 2...

geology
Magazine Articles By Mark J. Camp
...Camp 07/05/2014 Geology: The Basis for Scenery Magazine:...

Magazine Articles By Category: Scenery - Mountains
...trees, bushes, water, figures, and other details. Geology: The Basis for Scenery Magazine:...

Model Railroader 1977-12 Articles
...the turnout directly. No control panel needed. Geology: The Basis for Scenery Page: 140...

geometry
Magazine Articles By James Tangney
...70 Category: Structures Description: Geometry is explained to build scale drawings from...

Magazine Articles By M. R. Snell
...Conrail 21 car, which is a track geometry car. Includes prototype photos of this ex-SF...

Magazine Articles By Category: Passenger Cars
...Conrail 21 car, which is a track geometry car. Includes prototype photos of this ex-SF...

Magazine Articles By Category: Structures
...Author: James Tangney Description: Geometry is explained to build scale drawings from...

Model Railroad Hobbyist 2010-11/12 Articles
...Conrail 21 car, which is a track geometry car. Includes prototype photos of this ex-SF...

Railroad Model Craftsman 1996-05 Articles
...Tangney Category: Structures Description: Geometry is explained to build scale drawings from...

Magazine Articles for HO Scale
...Conrail 21 car, which is a track geometry car. Includes prototype photos of this ex-SF...

Team Track Platform
...a 4-to-1 slope. So, using some simple geometry, I could determine the length of the...

george
Chartiers Branch - Canonsburg Pottery
...the assets of Canonsburg China Company. The George family started and ran the company over...

Chartiers Branch - Track
...PA 14.9 1229'9" W.S. George Pottery Co. 14.9 1229'9"...

The PRR Chartiers Branch - Progress Report - 2013-11 Report
...I am a big fan of George Selios' layout and the way he...

Railroading Books - Great Model Railroads 1992
...O Scale Empire in a Garage Author: George Hall. Bob's layout occupies 17' by 19'...

Railroading Books - Great Model Railroads 1994
...62 Jack Burgess' Yosemite Valley RR George Hall's article about Jack's HO-scale layout. 73...

Railroading Books - Great Model Railroads 1995
... Tuolomne Forks Lumber Co. RR Author: George Hall. On3 layout by the editor of...

...A Jewel of a Gn3 Layout Author: George Hall. Ron Ritchner's Meadowbrook Lines. The layout...

Railroading Books - Model Railroad Bridges & Trestles
...and model article about this bridge by George W. Konrad. 18 105 Big...

Railroading Books - The Fabulous Franklin & South Manchester Railroad Vol 1
... 03/21/2001 Author : George Selios Publisher : Fine Scale Miniatures Published...

...off the fantastic HO-scale model railroad that George Selios has been building. The book doesn't...

Magazine Articles By Author
... - 6 articles Bruce Erickson & George Bishop - 1 articles Bruce F....

...M. Graeber, MD - 1 articles George and Chris Carroll - 1 articles...

...and Chris Carroll - 1 articles George Carroll - 1 articles George Drury...

...articles George Carroll - 1 articles George Drury - 2 articles George Foster...

...articles George Drury - 2 articles George Foster Doak, Jr. - 1 articles...

...Foster Doak, Jr. - 1 articles George Gibson - 1 articles George Hall...

...articles George Gibson - 1 articles George Hall - 5 articles George Konrad...

...articles George Hall - 5 articles George Konrad - 2 articles George Kovach...

...articles George Konrad - 2 articles George Kovach - 1 articles George Melvin...

...articles George Kovach - 1 articles George Melvin - 17 articles George P....

...articles George Melvin - 17 articles George P. Landow - 1 articles George...

...George P. Landow - 1 articles George Pierson - 1 articles George Reneris...

...articles George Pierson - 1 articles George Reneris - 1 articles George Riley...

...articles George Reneris - 1 articles George Riley & John Earley - 2...

...& John Earley - 2 articles George Sebastian-Coleman - 11 articles George Trager...

...articles George Sebastian-Coleman - 11 articles George Trager - 4 articles Gerald Brothers...

Magazine Articles By Art Fahie
...& South Manchester Revisited... A Conversation with George Magazine: Model Railroading 2001-09 Page:...

... HO Description: The author asks George Selios a number of questions about his...

Magazine Articles By Bruce Erickson & George Bishop
...- Magazine Articles By Bruce Erickson & George Bishop My Library - Magazine Articles By...

...- Magazine Articles By Bruce Erickson & George Bishop 07/05/2014...

Magazine Articles By Carl Swanson
...very impressed because it looks like something George Selios would do. It turns out he...

Magazine Articles By Don Spiro
...schemes (that influenced the author) are included. George Lochsky's Northern Pacific Layout Magazine:...

Magazine Articles By George and Chris Carroll
My Library - Magazine Articles By George and Chris Carroll My Library - Magazine...

...Carroll My Library - Magazine Articles By George and Chris Carroll...

Magazine Articles By George Carroll
My Library - Magazine Articles By George Carroll My Library - Magazine Articles By...

...Carroll My Library - Magazine Articles By George Carroll 07/05/2014...

Magazine Articles By George Drury
My Library - Magazine Articles By George Drury My Library - Magazine Articles By...

...Drury My Library - Magazine Articles By George Drury 07/05/2014...

Magazine Articles By George Foster Doak, Jr.
My Library - Magazine Articles By George Foster Doak, Jr. My Library - Magazine...

...Jr. My Library - Magazine Articles By George Foster Doak, Jr....

Magazine Articles By George Gibson
My Library - Magazine Articles By George Gibson My Library - Magazine Articles By...

...Gibson My Library - Magazine Articles By George Gibson 07/05/2014...

Magazine Articles By George Hall
My Library - Magazine Articles By George Hall My Library - Magazine Articles By...

...Hall My Library - Magazine Articles By George Hall 07/05/2014...

Magazine Articles By George Konrad
My Library - Magazine Articles By George Konrad My Library - Magazine Articles By...

...Konrad My Library - Magazine Articles By George Konrad 07/05/2014...

Magazine Articles By George Kovach
My Library - Magazine Articles By George Kovach My Library - Magazine Articles By...

...Kovach My Library - Magazine Articles By George Kovach 07/05/2014...

Magazine Articles By George Melvin
My Library - Magazine Articles By George Melvin My Library - Magazine Articles By...

...Melvin My Library - Magazine Articles By George Melvin 07/05/2014...

Magazine Articles By George P. Landow
My Library - Magazine Articles By George P. Landow My Library - Magazine Articles...

...Landow My Library - Magazine Articles By George P. Landow...

Magazine Articles By George Pierson
My Library - Magazine Articles By George Pierson My Library - Magazine Articles By...

...Pierson My Library - Magazine Articles By George Pierson 07/05/2014...

Magazine Articles By George Reneris
My Library - Magazine Articles By George Reneris My Library - Magazine Articles By...

...Reneris My Library - Magazine Articles By George Reneris 07/05/2014...

... 07/05/2014 Meet an S Gauger - George Reneris Magazine: NASG Dispatch 2009-02...

Magazine Articles By George Riley & John Earley
My Library - Magazine Articles By George Riley & John Earley My Library -...

...Earley My Library - Magazine Articles By George Riley & John Earley...

Magazine Articles By George Sebastian-Coleman
My Library - Magazine Articles By George Sebastian-Coleman My Library - Magazine Articles By...

...Sebastian-Coleman My Library - Magazine Articles By George Sebastian-Coleman 07/05/2014...

...- Large Scale: HO Description: George Selios has made it to the town...

...a full trackplan of the layout to-date. George has switched to DCC and sound. General...

Magazine Articles By George Trager
My Library - Magazine Articles By George Trager My Library - Magazine Articles By...

...Trager My Library - Magazine Articles By George Trager 07/05/2014...

Magazine Articles By Tom Griffiths
... 07/05/2014 Modeling the B&O's St. George Float Bridge Magazine: Railroad Model...

Magazine Articles By Category: Automobiles
...2002-07/08 Page: 24 Author: George Carroll Scale: N Description: The...

...2008-11/12 Page: 39 Author: George Konrad Scale: G Description: The...

Magazine Articles By Category: Freight Cars - Autorack
...1999-12 Page: 126 Author: George Sebastian-Coleman Description: To be able to...

Magazine Articles By Category: Freight Cars - Hoppers
...2000-02 Page: 88 Author: George Sebastian-Coleman Description: Prototype photos. Scale model...

Magazine Articles By Category: Garden Railroading
...2000-04 Page: 95 Author: George Hall Scale: G Description: This...

Magazine Articles By Category: Layout Construction
...2006-07 Page: 36 Author: George Sebastian-Coleman Scale: On3 Description: This...

...2006-08 Page: 50 Author: George Sebastian-Coleman Scale: On3 Description: This...

...2006-09 Page: 52 Author: George Sebastian-Coleman Scale: On3 Description: This...

...2007-03 Page: 90 Author: George Riley & John Earley Scale: HO...

...2007-04 Page: 72 Author: George Riley & John Earley Scale: HO...

Magazine Articles By Category: Layout Lighting
...2012-01 Page: 51 Author: George Gibson Description: Using new LED ribbon...

Magazine Articles By Category: Layouts
...52 Author: Bruce Erickson & George Bishop Scale: HO Description: A...

...2005-01 Page: 94 Author: George Hall Scale: O Description: The...

Magazine Articles By Category: Layouts - HO - Large
...& South Manchester Revisited... A Conversation with George Magazine: Model Railroading 2001-09 Page:...

... HO Description: The author asks George Selios a number of questions about his...

...1999-12 Page: 74 Author: George Sebastian-Coleman Scale: HO Description: George...

...George Sebastian-Coleman Scale: HO Description: George Selios has made it to the town...

...a full trackplan of the layout to-date. George has switched to DCC and sound. From...

...2008 Page: 39 Author: George Kovach Description: This layout spans 40...

...very impressed because it looks like something George Selios would do. It turns out he...

Magazine Articles By Category: Layouts - HO - Medium
...based on the American narrow gauge prototype. George Lochsky's Northern Pacific Layout Magazine:...

Magazine Articles By Category: Layouts - O
...2003-11 Page: 100 Author: George Hall Scale: O Description: This...

Magazine Articles By Category: Layouts - S
... 07/05/2014 Meet an S Gauger - George Reneris Magazine: NASG Dispatch 2009-02...

...2009-02 Page: 16 Author: George Reneris Scale: S Description: The...

Magazine Articles By Category: Locomotives - Diesel
...2005-07 Page: 24 Author: George Melvin Description: This installment covers the...

...1972-03 Page: 43 Author: George Trager Description: Prototype photos (NYC and...

...1996-09 Page: 78 Author: George Sebastian-Coleman Description: Describes the locomotive and...

...2000-11/12 Page: 30 Author: George Melvin Description: Describes and shows prototype...

...2000-12 Page: 20 Author: George Melvin Description: This installment covers the...

...2001-09 Page: 20 Author: George Melvin Description: The article mostly covers...

...2002-06 Page: 20 Author: George Melvin GP40: The First 645 Geep Part...

...2002-07 Page: 21 Author: George Melvin GP40: The First 645 Geep Part...

...2002-08 Page: 22 Author: George Melvin Description: Western Pacific GP40: The...

...2002-09 Page: 21 Author: George Melvin Description: Prototype photos. Grab Iron...

...2002-10 Page: 48 Author: George Melvin Description: Prototype photos of many...

...2002-11 Page: 48 Author: George Melvin Description: Photos and information about...

...2003-04 Page: 48 Author: George Melvin Description: Prototype photos of the...

...2005-11 Page: 50 Author: George Melvin Description: Many prototype photos of...

...2005-12 Page: 32 Author: George Melvin Description: This installment covers the...

...2006-01 Page: 28 Author: George Melvin Description: Many prototype photos of...

...2006-02 Page: 18 Author: George Melvin Description: Prototype photos of Southern...

...2005-02 Page: 20 Author: George Melvin Description: Prototype photos and text...

...2005-04 Page: 20 Author: George Melvin The GE Dash 8-40C(W) Magazine:...

Magazine Articles By Category: Locomotives - Steam
...2006-07 Page: 53 Author: George Pierson Scale: HOn3 Description: The...

Magazine Articles By Category: Model Railroad Retailers
...1991-01 Page: 138 Author: George Hall Description: This store is located...

...1992-05 Page: 112 Author: George Hall Description: The behind-the-scenes story of...

Magazine Articles By Category: Passenger Cars
...2000-03 Page: 106 Author: George Sebastian-Coleman Description: Prototype photos, scale drawings....

...1972-06 Page: 38 Author: George Trager Description: Prototype photos of the...

...1972-04 Page: 44 Author: George Trager Description: Scale drawings and prototype...

...1978-01 Page: 81 Author: George Drury Description: A one-page article about...

...1977-03 Page: 66 Author: George Drury Description: A brief description of...

...1972-11 Page: 52 Author: George Trager Description: Prototype photos and scale...

Magazine Articles By Category: Pennsylvania Railroad
...No.2 Page: 26 Author: George Foster Doak, Jr. Description: The author...

Magazine Articles By Category: Scenery - Mountains
...1996-09 Page: 70 Author: George Sebastian-Coleman Scale: HO Description: The...

Magazine Articles By Category: Scenery - Vehicles
...2003-07/08 Page: 60 Author: George and Chris Carroll Scale: N Description:...

Magazine Articles By Category: Structures
...1996-10 Page: 82 Author: George Sebastian-Coleman Description: The basics of how...

Magazine Articles By Category: Structures - Bridges
...the layout afterwards. Modeling the B&O's St. George Float Bridge Magazine: Railroad Model...

Magazine Articles By Category: Structures - Industrial
...1979-02 Page: 72 Author: George P. Landow Scale: HO Description:...

...1977-01 Page: 78 Author: George Konrad Description: The author makes a...

Magazine Articles By Category: Track
...2003-05 Page: 74 Author: George Sebastian-Coleman Description: Definitions of narrow gauge...

Model Railroader 1977-01 Articles
...Tipple Page: 78 Author: George Konrad Category: Structures - Industrial...

Model Railroader 1977-03 Articles
...Coach Page: 66 Author: George Drury Category: Passenger Cars Description:...

Model Railroader 1978-01 Articles
...Car Page: 81 Author: George Drury Category: Passenger Cars Description:...

Model Railroader 1979-02 Articles
...works! Page: 72 Author: George P. Landow Category: Structures -...

Model Railroader 1991-01 Articles
...Shop Page: 138 Author: George Hall Category: Model Railroad Retailers...

Model Railroader 1992-05 Articles
...Station Page: 112 Author: George Hall Category: Model Railroad Retailers...

Model Railroader 1996-09 Articles
...Molds Page: 70 Author: George Sebastian-Coleman Category: Scenery - Mountains...

...AC6000CW Page: 78 Author: George Sebastian-Coleman Category: Locomotives - Diesel...

Model Railroader 1996-10 Articles
...Basics Page: 82 Author: George Sebastian-Coleman Category: Structures Description:...

Model Railroader 1999-12 Articles
...Franklin! Page: 74 Author: George Sebastian-Coleman Category: Layouts - HO...

...- Large Scale: HO Description: George Selios has made it to the town...

...a full trackplan of the layout to-date. George has switched to DCC and sound. Modeling...

...Better Page: 126 Author: George Sebastian-Coleman Category: Freight Cars -...

Model Railroader 2000-02 Articles
...Flow Page: 88 Author: George Sebastian-Coleman Category: Freight Cars -...

Model Railroader 2000-03 Articles
...Car Page: 106 Author: George Sebastian-Coleman Category: Passenger Cars Description:...

Model Railroader 2000-04 Articles
...Layout Page: 95 Author: George Hall Category: Garden Railroading Scale:...

Model Railroader 2002-09 Articles
...52 Author: Bruce Erickson & George Bishop Category: Layouts Scale:...

Model Railroader 2003-05 Articles
...Code Page: 74 Author: George Sebastian-Coleman Category: Track Description:...

Model Railroader 2003-11 Articles
...Style Page: 100 Author: George Hall Category: Layouts - O...

Model Railroader 2005-01 Articles
...History Page: 94 Author: George Hall Category: Layouts Scale:...

Model Railroader 2006-07 Articles
...1 Page: 36 Author: George Sebastian-Coleman Category: Layout Construction Scale:...

Model Railroader 2006-08 Articles
...2 Page: 50 Author: George Sebastian-Coleman Category: Layout Construction Scale:...

Model Railroader 2006-09 Articles
...3 Page: 52 Author: George Sebastian-Coleman Category: Layout Construction Scale:...

Model Railroader 2010-12 Articles
...very impressed because it looks like something George Selios would do. It turns out he...

Model Railroading 2000-11/12 Articles
...4 Page: 30 Author: George Melvin Category: Locomotives - Diesel...

Model Railroading 2000-12 Articles
...5 Page: 20 Author: George Melvin Category: Locomotives - Diesel...

Model Railroading 2001-09 Articles
...12 Page: 20 Author: George Melvin Category: Locomotives - Diesel...

...& South Manchester Revisited... A Conversation with George Page: 44 Author: Art...

... HO Description: The author asks George Selios a number of questions about his...

Model Railroading 2002-06 Articles
...21 Page: 20 Author: George Melvin Category: Locomotives - Diesel...

Model Railroading 2002-07 Articles
...22 Page: 21 Author: George Melvin Category: Locomotives - Diesel...

Model Railroading 2002-08 Articles
...23 Page: 22 Author: George Melvin Category: Locomotives - Diesel...

Model Railroading 2002-09 Articles
...24 Page: 21 Author: George Melvin Category: Locomotives - Diesel...

Model Railroading 2002-10 Articles
...1 Page: 48 Author: George Melvin Category: Locomotives - Diesel...

Model Railroading 2002-11 Articles
...2 Page: 48 Author: George Melvin Category: Locomotives - Diesel...

Model Railroading 2003-04 Articles
...7 Page: 48 Author: George Melvin Category: Locomotives - Diesel...

Model Railroading 2005-02 Articles
...4 Page: 20 Author: George Melvin Category: Locomotives - Diesel...

Model Railroading 2005-04 Articles
...5 Page: 20 Author: George Melvin Category: Locomotives - Diesel

Model Railroading 2005-07 Articles
...2 Page: 24 Author: George Melvin Category: Locomotives - Diesel...

Model Railroading 2005-11 Articles
...2 Page: 50 Author: George Melvin Category: Locomotives - Diesel...

Model Railroading 2005-12 Articles
...3 Page: 32 Author: George Melvin Category: Locomotives - Diesel...

Model Railroading 2006-01 Articles
...4 Page: 28 Author: George Melvin Category: Locomotives - Diesel...

Model Railroading 2006-02 Articles
...5 Page: 18 Author: George Melvin Category: Locomotives - Diesel...

N-Scale 2002-07/08 Articles
...Kitbashing Page: 24 Author: George Carroll Category: Automobiles Scale:...

N-Scale 2003-07/08 Articles
...Trucks Page: 60 Author: George and Chris Carroll Category: Scenery...

Narrow Gauge And Short Line Gazette 2008-11/12 Articles
...Trucks Page: 39 Author: George Konrad Category: Automobiles Scale:...

NASG Dispatch 2009-02 Articles
...S-scale layout. Meet an S Gauger - George Reneris Page: 16 Author:...

...Reneris Page: 16 Author: George Reneris Category: Layouts - S...

Railroad Model Craftsman 1972-03 Articles
...1945-49 Page: 43 Author: George Trager Category: Locomotives - Diesel...

Railroad Model Craftsman 1972-04 Articles
...P-S-1948 Page: 44 Author: George Trager Category: Passenger Cars Description:...

Railroad Model Craftsman 1972-06 Articles
...4172 Page: 38 Author: George Trager Category: Passenger Cars Description:...

Railroad Model Craftsman 1972-11 Articles
...9000-9029 Page: 52 Author: George Trager Category: Passenger Cars Description:...

Railroad Model Craftsman 2006-07 Articles
...2-8-0 Page: 53 Author: George Pierson Category: Locomotives - Steam...

Railroad Model Craftsman 2007-03 Articles
...Branch Page: 90 Author: George Riley & John Earley Category:...

Railroad Model Craftsman 2007-04 Articles
...II Page: 72 Author: George Riley & John Earley Category:...

Railroad Model Craftsman 2010-09 Articles
...Articles 07/05/2014 George Lochsky's Northern Pacific Layout Page: 38...

Railroad Model Craftsman 2011-12 Articles
...like a gondola. Modeling the B&O's St. George Float Bridge Page: 56 Author:...

Railroad Model Craftsman 2012-01 Articles
...Lighting Page: 51 Author: George Gibson Category: Layout Lighting Description:...

The Keystone Modeler 60 July 2008 Articles
...On Page: 39 Author: George Kovach Category: Layouts - HO...

The Keystone Vol 47 No.2 Articles
...PX5444 Page: 26 Author: George Foster Doak, Jr. Category: Pennsylvania...

Magazine Articles for G Scale
...2000-04 Page: 95 Author: George Hall Category: Garden Railroading Description:...

...2008-11/12 Page: 39 Author: George Konrad Category: Automobiles Description:...

Magazine Articles for HO Scale
...52 Author: Bruce Erickson & George Bishop Category: Layouts Description:...

...& South Manchester Revisited... A Conversation with George Magazine: Model Railroading 2001-09 Page:...

...- Large Description: The author asks George Selios a number of questions about his...

...1999-12 Page: 74 Author: George Sebastian-Coleman Category: Layouts - HO...

...Layouts - HO - Large Description: George Selios has made it to the town...

...a full trackplan of the layout to-date. George has switched to DCC and sound. From...

...KCS #250236. Includes prototype and model photos. George Lochsky's Northern Pacific Layout Magazine:...

...1979-02 Page: 72 Author: George P. Landow Category: Structures -...

...on this model. Modeling the B&O's St. George Float Bridge Magazine: Railroad Model...

...very impressed because it looks like something George Selios would do. It turns out he...

...2007-03 Page: 90 Author: George Riley & John Earley Category:...

...2007-04 Page: 72 Author: George Riley & John Earley Category:...

...1996-09 Page: 70 Author: George Sebastian-Coleman Category: Scenery - Mountains...

Magazine Articles for HOn3 Scale
...2006-07 Page: 53 Author: George Pierson Category: Locomotives - Steam...

Magazine Articles for N Scale
...2003-07/08 Page: 60 Author: George and Chris Carroll Category: Scenery...

...2002-07/08 Page: 24 Author: George Carroll Category: Automobiles Description:...

Magazine Articles for O Scale
...2003-11 Page: 100 Author: George Hall Category: Layouts - O...

...2005-01 Page: 94 Author: George Hall Category: Layouts Description:...

Magazine Articles for On3 Scale
...2006-07 Page: 36 Author: George Sebastian-Coleman Category: Layout Construction Description:...

...2006-08 Page: 50 Author: George Sebastian-Coleman Category: Layout Construction Description:...

...2006-09 Page: 52 Author: George Sebastian-Coleman Category: Layout Construction Description:...

Magazine Articles for S Scale
...SHS products. Meet an S Gauger - George Reneris Magazine: NASG Dispatch 2009-02...

...2009-02 Page: 16 Author: George Reneris Category: Layouts - S...

My Library - Photo Albums - Passenger Cars
...of photos, including close-up shots, of the George H. Gould car. The "City of Galveston"...

Online Digital Videos
...2010 Big Texas Train Show in the George R. Brown Convention Center in Houston, Texas....

Railroading Videos - Great Model Railroads Vol 24
...Published: 1996 This is Part 2 of George Sellios' fabulous Franklin & South Manchester, the...

...way to the floor! In these areas George continued his method of just building with...

Railroading Videos - Great Model Railroads Vol 39
...that they cry out for your attention. George is now doing smaller wood buildings in...

Railroading Videos - Great Model Railroads Vol 2
...is the creation of professional model builder George Sellios. Because of George's talents you'll see...

...professional model builder George Sellios. Because of George's talents you'll see something new each time...

About pmrr.org
...by frequent recurrence to fundamental principles." - George Mason "Laws that forbid the carrying of...

Furniture Factory - Lumber Shed
...saw on Allen Keller's video (#39) visiting George Selios' layout for the third time. First,...

georgetown
Magazine Articles By Harry W. Brunk
...of the fences. Re-working the Brickwork at Georgetown Magazine: Narrow Gauge And Short...

...build a more accurate model of the Georgetown Stewart & Wing Warehouse.

Magazine Articles By Lee Burbage
...traffic, PRR #1611 day coach, railyards at Georgetown, Delaware, current day photographs of the remains,...

Magazine Articles By Category: Pennsylvania Railroad
...traffic, PRR #1611 day coach, railyards at Georgetown, Delaware, current day photographs of the remains,...

Magazine Articles By Category: Structures - Industrial
...round PVC pipe. Re-working the Brickwork at Georgetown Magazine: Narrow Gauge And Short...

...build a more accurate model of the Georgetown Stewart & Wing Warehouse. Roller Mills N0....

Narrow Gauge And Short Line Gazette 2008-11/12 Articles
...of this derrick. Re-working the Brickwork at Georgetown Page: 72 Author: Harry...

...build a more accurate model of the Georgetown Stewart & Wing Warehouse. Route to the...

The Keystone Vol 38 No.3 Articles
...traffic, PRR #1611 day coach, railyards at Georgetown, Delaware, current day photographs of the remains,...

georgia
Railroading Books - The Berkshire And Texas Types
...Southern Pacific 180 Tennessee, Alabama & Georgia 182 Nacionales De Mexico 184...

Magazine Articles By Charles Sims
... 07/05/2014 Modeling Georgia in the 1940's Magazine: Model...

Magazine Articles By Thomas A. Yorke
...station built in 1926 in Mountain City, Georgia. Old Trolley Bodies Need Not Die Magazine:...

Magazine Articles By Category: Layouts
...discussing the "joy of terminal operation". Modeling Georgia in the 1940's Magazine: Model...

Magazine Articles By Category: Structures - Towns/Cities
...station built in 1926 in Mountain City, Georgia. Keveny Memorial Academy Magazine: Railroad...

Model Railroader 1997-07 Articles
...of the 9' by 16' layout. Modeling Georgia in the 1940's Page: 64 Author:...

Railroad Model Craftsman 1996-03 Articles
...station built in 1926 in Mountain City, Georgia.

Magazine Articles for HO Scale
...creating and installing crops of soybeans. Modeling Georgia in the 1940's Magazine: Model...

geraci
Magazine Articles By Author
...Frank Duff - 1 articles Frank Geraci - 1 articles Franz Martin...

Magazine Articles By Frank Geraci
My Library - Magazine Articles By Frank Geraci My Library - Magazine Articles By Frank...

...My Library - Magazine Articles By Frank Geraci 07/05/2014 Kitbashing...

Magazine Articles By Category: Freight Cars - Flat Cars
...Page: 78 Author: Frank Geraci Scale: HO Description: Modeling a...

Railroad Model Craftsman 2002-09 Articles
...Page: 78 Author: Frank Geraci Category: Freight Cars - Flat...

Magazine Articles for HO Scale
...Page: 78 Author: Frank Geraci Category: Freight Cars - Flat...

gerald
Magazine Articles By Author
...articles George Trager - 4 articles Gerald Brothers - 1 articles Gerald Gilliland...

...articles Gerald Brothers - 1 articles Gerald Gilliland - 1 articles Gerald McGee...

...articles Gerald Gilliland - 1 articles Gerald McGee - 1 articles Gerry Doeksen...

Magazine Articles By Gerald Brothers
My Library - Magazine Articles By Gerald Brothers My Library - Magazine Articles By...

...Brothers My Library - Magazine Articles By Gerald Brothers 07/05/2014...

Magazine Articles By Gerald Gilliland
My Library - Magazine Articles By Gerald Gilliland My Library - Magazine Articles By...

...Gilliland My Library - Magazine Articles By Gerald Gilliland 07/05/2014...

Magazine Articles By Gerald McGee
My Library - Magazine Articles By Gerald McGee My Library - Magazine Articles By...

...McGee My Library - Magazine Articles By Gerald McGee 07/05/2014...

Magazine Articles By Category: Layouts
...1990-02 Page: 73 Author: Gerald McGee Scale: HO Description: Features...

Magazine Articles By Category: Locomotives - Electric
...2005 Page: 290 Author: Gerald Brothers Scale: O Description: The...

Magazine Articles By Category: Structures - Industrial
...1991-03 Page: 122 Author: Gerald Gilliland Scale: HO Description: The...

Model Railroader 1990-02 Articles
...1906 Page: 73 Author: Gerald McGee Category: Layouts Scale:...

Model Railroader 1991-03 Articles
...Co. Page: 122 Author: Gerald Gilliland Category: Structures - Industrial...

O Scale Trains Magazine 23 November 2005 Articles
...Combine Page: 290 Author: Gerald Brothers Category: Locomotives - Electric...

Magazine Articles for HO Scale
...1990-02 Page: 73 Author: Gerald McGee Category: Layouts Description:...

...1991-03 Page: 122 Author: Gerald Gilliland Category: Structures - Industrial...

Magazine Articles for O Scale
...2005 Page: 290 Author: Gerald Brothers Category: Locomotives - Electric...

gerdes
Magazine Articles By Author
...John Franzen - 1 articles John Gerdes - 8 articles John Glaab...

Magazine Articles By John Gerdes
My Library - Magazine Articles By John Gerdes My Library - Magazine Articles By John...

...My Library - Magazine Articles By John Gerdes 07/05/2014 By...

Magazine Articles By Category: Scenery - Design
...Page: 66 Author: John Gerdes Scale: N Description: Building scenery...

Magazine Articles By Category: Scenery - Mountains
...Page: 66 Author: John Gerdes Description: Carving heavily weathered rock faces.

Magazine Articles By Category: Scenery - Streets
...Page: 26 Author: John Gerdes Scale: N Description: The author...

Magazine Articles By Category: Scenery - Trackside
...Page: 26 Author: John Gerdes Scale: N Description: Building a...

...Page: 56 Author: John Gerdes Scale: N Description: Photos of...

Magazine Articles By Category: Scenery - Trees, Shrubs, Bushes
...Page: 44 Author: John Gerdes Scale: N Description: Various topics...

Magazine Articles By Category: Structures
...Page: 64 Author: John Gerdes Scale: N Description: The article...

Magazine Articles By Category: Structures - Bridges
...Page: 52 Author: John Gerdes Scale: N Description: Detailed instructions...

N-Scale 2002-03/04 Articles
...Page: 56 Author: John Gerdes Category: Scenery - Trackside Scale:...

N-Scale 2002-07/08 Articles
...Page: 44 Author: John Gerdes Category: Scenery - Trees, Shrubs,...

N-Scale 2002-10/11 Articles
...Page: 66 Author: John Gerdes Category: Scenery - Design Scale:...

N-Scale 2002-11/12 Articles
...Page: 66 Author: John Gerdes Category: Scenery - Mountains Description:...

N-Scale 2003-01/02 Articles
...Page: 26 Author: John Gerdes Category: Scenery - Streets Scale:...

N-Scale 2003-03/04 Articles
...Page: 26 Author: John Gerdes Category: Scenery - Trackside Scale:...

N-Scale 2003-05/06 Articles
...Page: 52 Author: John Gerdes Category: Structures - Bridges Scale:...

N-Scale 2003-07/08 Articles
...Page: 64 Author: John Gerdes Category: Structures Scale: N...

Magazine Articles for N Scale
...Page: 26 Author: John Gerdes Category: Scenery - Trackside Description:...

...Page: 52 Author: John Gerdes Category: Structures - Bridges Description:...

...Page: 26 Author: John Gerdes Category: Scenery - Streets Description:...

...Page: 44 Author: John Gerdes Category: Scenery - Trees, Shrubs,...

...Page: 64 Author: John Gerdes Category: Structures Description: The...

...Page: 66 Author: John Gerdes Category: Scenery - Design Description:...

...Page: 56 Author: John Gerdes Category: Scenery - Trackside Description:...

gerisch
Magazine Articles By Author
...Vincent Pellitteri - 1 articles Volker Gerisch - 1 articles W. Allen McClelland...

Magazine Articles By Volker Gerisch
My Library - Magazine Articles By Volker Gerisch My Library - Magazine Articles By Volker...

...My Library - Magazine Articles By Volker Gerisch 07/05/2014 The...

Magazine Articles By Category: Dioramas
...Page: 49 Author: Volker Gerisch Scale: Large Scale Description: This...

The Modeler's Annual Winter 2014 Articles
...Page: 49 Author: Volker Gerisch Category: Dioramas Scale: Large...

Magazine Articles for Large Scale Scale
...Page: 49 Author: Volker Gerisch Category: Dioramas Description: This...

german
Magazine Articles By Dennis Burnside
...This article covers the history of the German Marklin company, and includes information about visiting...

Magazine Articles By Frank Cicero
...Description: The author took a Roco German DB Class 101 engine and converted it...

Magazine Articles By Category: Locomotives - Electric
...Description: The author took a Roco German DB Class 101 engine and converted it...

Magazine Articles By Category: Model Railroad Manufacturers
...This article covers the history of the German Marklin company, and includes information about visiting...

Model Railroader 1992-05 Articles
...This article covers the history of the German Marklin company, and includes information about visiting...

Railroad Model Craftsman 2003-05 Articles
...Description: The author took a Roco German DB Class 101 engine and converted it...

Magazine Articles for HO Scale
...Description: The author took a Roco German DB Class 101 engine and converted it...

germany
Magazine Articles By Dennis Burnside
...visiting the company in Goeppingen near Stuttgart, Germany.

Magazine Articles By Erhard Baltrusch
... 07/05/2014 American Dream in Germany Magazine: Model Railroader 2006-02 Page:...

...Description: The Miniatur Wunderland in Hamburg Germany has been working hard on their American...

Magazine Articles By Frank Cicero
...7,100hp, 100-mph commuter train built in Kassel, Germany. Includes scale diagrams, lots of close-ups detail...

Magazine Articles By Marc Reusser
...(front area only) that he found in Germany.

Magazine Articles By Category: Dioramas
...(front area only) that he found in Germany. Dearborn Station Magazine: Model Railroader...

Magazine Articles By Category: Layouts
...Sierra Nevada mountain range. American Dream in Germany Magazine: Model Railroader 2006-02 Page:...

...Description: The Miniatur Wunderland in Hamburg Germany has been working hard on their American...

Magazine Articles By Category: Locomotives - Electric
...7,100hp, 100-mph commuter train built in Kassel, Germany. Includes scale diagrams, lots of close-ups detail...

Magazine Articles By Category: Model Railroad Manufacturers
...visiting the company in Goeppingen near Stuttgart, Germany. Richard "Dick" Truesdale And His Westside Model...

Model Railroader 1992-05 Articles
...visiting the company in Goeppingen near Stuttgart, Germany. Railroading with Marklin Page: 94 Author:...

Model Railroader 2006-02 Articles
...and close-up construction photos. American Dream in Germany Page: 54 Author: Erhard...

...Description: The Miniatur Wunderland in Hamburg Germany has been working hard on their American...

Railroad Model Craftsman 2003-03 Articles
...7,100hp, 100-mph commuter train built in Kassel, Germany. Includes scale diagrams, lots of close-ups detail...

The Modeler's Annual Winter 2014 Articles
...(front area only) that he found in Germany. A Powell Planer Page: 106 Author:...

Magazine Articles for HO Scale
...a multi-purpose whistle stop. American Dream in Germany Magazine: Model Railroader 2006-02 Page:...

...Description: The Miniatur Wunderland in Hamburg Germany has been working hard on their American...

Magazine Articles for Large Scale Scale
...(front area only) that he found in Germany. Don Phillips' Large Scale Diesels Magazine:...

Railroading Videos - Super Trains
...at 321 mph! We also travel to Germany to inspect the maglev test train. This...

gerritsen
Magazine Articles By Craig Wilson
...allows for many close-up shots of Arnt Gerritsen's model railroad.

Magazine Articles By Category: Layouts
...allows for many close-up shots of Arnt Gerritsen's model railroad. Arvern Bay Terminal RR Magazine:...

Railroad Model Craftsman 2005-12 Articles
...allows for many close-up shots of Arnt Gerritsen's model railroad. L&NE ARA Boxcar Upgrade Page:...

Magazine Articles for HO Scale
...allows for many close-up shots of Arnt Gerritsen's model railroad. Another Approach to an H5...

gerry
Railroading Books - Great Model Railroads 1992
... 42 Operations Night Rookie Author: Gerry Souter. The article describes what it is...

Railroading Books - Great Model Railroads 2008
... 76 Freelancing in the Northland Gerry Leone built this fictional HO-scale Bona Vista...

Railroading Books - Great Model Railroads 2014
...Heavy-duty Coal Hauler Comes Back to Life Gerry Albers describes building and operating his District...

...a side-bar on hidden staging. See Gerry's web site for more about the...

...Virginian & Ohio Allen McClelland describes how Gerry Albers (see page 8) has allocated a...

Magazine Articles By Author
...articles Gerald McGee - 1 articles Gerry Doeksen - 1 articles Gerry Evans...

...articles Gerry Doeksen - 1 articles Gerry Evans - 3 articles Gerry Gilliland...

...articles Gerry Evans - 3 articles Gerry Gilliland - 1 articles Gerry Leone...

...articles Gerry Gilliland - 1 articles Gerry Leone - 12 articles Gilbert Moreno...

Magazine Articles By Gerry Doeksen
My Library - Magazine Articles By Gerry Doeksen My Library - Magazine Articles By...

...Doeksen My Library - Magazine Articles By Gerry Doeksen 07/05/2014...

Magazine Articles By Gerry Evans
My Library - Magazine Articles By Gerry Evans My Library - Magazine Articles By...

...Evans My Library - Magazine Articles By Gerry Evans 07/05/2014...

... Structures Scale: S Description: Gerry reviews the NASG Brick Building and the...

...- Industrial Scale: S Description: Gerry reviews and describes how he built the...

Magazine Articles By Gerry Gilliland
My Library - Magazine Articles By Gerry Gilliland My Library - Magazine Articles By...

...Gilliland My Library - Magazine Articles By Gerry Gilliland 07/05/2014...

Magazine Articles By Gerry Leone
My Library - Magazine Articles By Gerry Leone My Library - Magazine Articles By...

...Leone My Library - Magazine Articles By Gerry Leone 07/05/2014...

Magazine Articles By Category: Cabooses
...2006-01 Page: 84 Author: Gerry Leone Scale: HO Description: This...

Magazine Articles By Category: Electronics
...2005-08 Page: 81 Author: Gerry Leone Description: While not fully understanding...

...2006-09 Page: 76 Author: Gerry Leone Description: This article describes how...

Magazine Articles By Category: Layout Construction
...2003-05 Page: 86 Author: Gerry Leone Description: Using a slide switch...

Magazine Articles By Category: Locomotives - Diesel
...1991-01 Page: 172 Author: Gerry Gilliland Scale: HO Description: This...

...1973-09 Page: 30 Author: Gerry Doeksen Scale: N Description: The...

Magazine Articles By Category: Scenery - Waterside
...2007-04 Page: 66 Author: Gerry Leone Scale: HO Description: The...

Magazine Articles By Category: Structures
...2009-02 Page: 10 Author: Gerry Evans Scale: S Description: Using...

...2010-07 Page: 40 Author: Gerry Leone Scale: HO Description: The...

...2009-10 Page: 20 Author: Gerry Evans Scale: S Description: Gerry...

...Gerry Evans Scale: S Description: Gerry reviews the NASG Brick Building and the...

Magazine Articles By Category: Structures - Depots/Stations/Yards
...2008-11 Page: 52 Author: Gerry Leone Scale: HO Description: This...

Magazine Articles By Category: Structures - Homes
...2008-02 Page: 59 Author: Gerry Leone Scale: HO Description: The...

Magazine Articles By Category: Structures - Industrial
...2003-05 Page: 58 Author: Gerry Leone Scale: HO Description: The...

...2005-06 Page: 16 Author: Gerry Evans Scale: S Description: Gerry...

...Gerry Evans Scale: S Description: Gerry reviews and describes how he built the...

Magazine Articles By Category: Structures - Track-side Details
...2008-12 Page: 87 Author: Gerry Leone Scale: HO Description: This...

Magazine Articles By Category: Tools
...2007-01 Page: 58 Author: Gerry Leone Description: Using a drill press,...

...2006-01 Page: 65 Author: Gerry Leone Description: Pliers, drill bit holder,...

Model Railroader 1991-01 Articles
...GP38 Page: 172 Author: Gerry Gilliland Category: Locomotives - Diesel...

Model Railroader 2003-05 Articles
...Controls Page: 86 Author: Gerry Leone Category: Layout Construction Description:...

NASG Dispatch 2005-06 Articles
...Warehouse Page: 16 Author: Gerry Evans Category: Structures - Industrial...

...- Industrial Scale: S Description: Gerry reviews and describes how he built the...

NASG Dispatch 2009-02 Articles
...Office Page: 10 Author: Gerry Evans Category: Structures Scale:...

NASG Dispatch 2009-10 Articles
...Feature Page: 20 Author: Gerry Evans Category: Structures Scale:...

... Structures Scale: S Description: Gerry reviews the NASG Brick Building and the...

Railroad Model Craftsman 1973-09 Articles
...Conversion Page: 30 Author: Gerry Doeksen Category: Locomotives - Diesel...

Railroad Model Craftsman 2003-05 Articles
...Creamery Page: 58 Author: Gerry Leone Category: Structures - Industrial...

Railroad Model Craftsman 2005-08 Articles
..."Schematicophobia" Page: 81 Author: Gerry Leone Category: Electronics Description:...

Railroad Model Craftsman 2006-01 Articles
...Tunnel Page: 84 Author: Gerry Leone Category: Cabooses Scale:...

Railroad Model Craftsman 2006-09 Articles
...Far? Page: 76 Author: Gerry Leone Category: Electronics Description:...

Railroad Model Craftsman 2007-01 Articles
...Rivets Page: 58 Author: Gerry Leone Category: Tools Description:...

Railroad Model Craftsman 2007-04 Articles
...Detailing Page: 66 Author: Gerry Leone Category: Scenery - Waterside...

Railroad Model Craftsman 2008-02 Articles
...Building Page: 59 Author: Gerry Leone Category: Structures - Homes...

Railroad Model Craftsman 2008-11 Articles
...Depot Page: 52 Author: Gerry Leone Category: Structures - Depots/Stations/Yards...

Railroad Model Craftsman 2008-12 Articles
...Targets Page: 87 Author: Gerry Leone Category: Structures - Track-side...

Railroad Model Craftsman 2010-07 Articles
...Neighborhood Page: 40 Author: Gerry Leone Category: Structures Scale:...

Scale Rails 2006-01 Articles
...Tools Page: 65 Author: Gerry Leone Category: Tools Description:...

Magazine Articles for HO Scale
...1991-01 Page: 172 Author: Gerry Gilliland Category: Locomotives - Diesel...

...2010-07 Page: 40 Author: Gerry Leone Category: Structures Description:...

...2008-02 Page: 59 Author: Gerry Leone Category: Structures - Homes...

...2008-12 Page: 87 Author: Gerry Leone Category: Structures - Track-side...

...2003-05 Page: 58 Author: Gerry Leone Category: Structures - Industrial...

...2008-11 Page: 52 Author: Gerry Leone Category: Structures - Depots/Stations/Yards...

...2006-01 Page: 84 Author: Gerry Leone Category: Cabooses Description:...

...2007-04 Page: 66 Author: Gerry Leone Category: Scenery - Waterside...

Magazine Articles for N Scale
...1973-09 Page: 30 Author: Gerry Doeksen Category: Locomotives - Diesel...

Magazine Articles for S Scale
...2009-02 Page: 10 Author: Gerry Evans Category: Structures Description:...

...2009-10 Page: 20 Author: Gerry Evans Category: Structures Description:...

...Evans Category: Structures Description: Gerry reviews the NASG Brick Building and the...

...2005-06 Page: 16 Author: Gerry Evans Category: Structures - Industrial...

... Structures - Industrial Description: Gerry reviews and describes how he built the...

gerstle
Magazine Articles By Author
...Pat Ford - 1 articles Pat Gerstle - 1 articles Pat Hayward...

Magazine Articles By Pat Gerstle
My Library - Magazine Articles By Pat Gerstle My Library - Magazine Articles By Pat...

...My Library - Magazine Articles By Pat Gerstle 07/05/2014 Western...

Magazine Articles By Category: Scenery - Trees, Shrubs, Bushes
...Page: 106 Author: Pat Gerstle Description: This article covers how to...

Model Railroader 2000-04 Articles
...Page: 106 Author: Pat Gerstle Category: Scenery - Trees, Shrubs,...

get-together
Magazine Articles By Bill Fraley
...models the Lehigh Valley. The Central Jersey "Get-together" Magazine: NASG Dispatch 2009-12 Page:...

Magazine Articles By Category: Model Railroad Shows
...coming up in 2012. The Central Jersey "Get-together" Magazine: NASG Dispatch 2009-12 Page:...

NASG Dispatch 2009-12 Articles
...includes several construction photos. The Central Jersey "Get-together" Page: 12 Author: Bill...

Magazine Articles for S Scale
...about the BC&G today. The Central Jersey "Get-together" Magazine: NASG Dispatch 2009-12 Page:...

gets
DCC - S-CAB
...starter bundle, which is what I bought, gets you the throttle and one decoder/receiver bundle....

...to the parts. The Battery Power Supply gets current from the rails, if power is...

DCC - Tsunami Decoder Programming
...yellow wires of the decoder. The decoder gets its power and signal from the two...

Hand-building Crossings - Building a Crossing
...to lay the rail, so the ballasting gets done next. A crossing is a rather...

N-scale Equipment - Model Power 4-6-2 - DCC Conversion
...The headlight is ON automatically. It simply gets its electricity from the rails. The bulb...

Scenery - Conifer Trees
...The tape used to hold the fibers gets wrapped up into the twisted metal and...

Scenery - Generic Background Trees
...hand that holds the tree, because this gets messy and sticky. You will notice that...

Scenery - Scenery Base
...down at least two layers, but that gets expensive. If you require a very strong...

Scenery - Scenic Barrier
...sheet of wood would do. The top gets trimmed to give the illusion of mountain...

Tools - Key-chain Video Camera
...in the full HD quality, but compression gets applied after upload, of course. Video...

Tools - Small Tools
...you are building kits. The sharp point gets into the tight spaces to cut parts...

Tortoise Installation Ideas - Sideways Installation
...actually falls down a bit when it gets in one position. So, a thought occurred...

Trackwork - Ballasting Flextrack
...kind that seems to float when it gets wet (some Woodland Scenics ballast is known...

Equipment - PRR FM Flat Car - Construction: Exterior Details
...the styrene "bridge", because it too just gets hit by the wheels. The stirrups are...

Equipment - PRR RS-1 Road Switcher - Construction: Conclusion
...the end, in other words, the project gets harder as you progress! No nice way...

P & C Railroad Version 3 - Progress Report
...2001-09 Report 09/23/2001 River gets water, and layout redesign. 2001-10 Report...

The PRR Chartiers Branch - Layout Milestones
...2013: Switched to using S-CAB-with-battery-power. Closet module gets track and scenery. Two new structures.

The PRR Chartiers Branch - Progress Report
...2014-01 Report 01/30/2014 Washington gets sidewalks. More scenery expansion. 2014-02 Report...

The PRR Chartiers Branch - Progress Report - 2013-12 Report
...covered the track, because applying plaster cloth gets kind of messy. I made sure everything...

Magazine Articles By David S. Busch
...purpose of a sandblast system and then gets into how he built his own. Includes...

Magazine Articles By Kevin Strong
... Scratchbuilding Description: This article gets into the basics of metal working discussing...

Magazine Articles By Lionel Strang
...an accomplished HO-scale modeler. A New Tool Gets Me Off My Duff Magazine:...

Magazine Articles By Category: Scratchbuilding
... Kevin Strong Description: This article gets into the basics of metal working discussing...

Magazine Articles By Category: Tools
...scale drawings when scratchbuilding. A New Tool Gets Me Off My Duff Magazine:...

...purpose of a sandblast system and then gets into how he built his own. Includes...

Garden Railways 2005-12 Articles
... Scratchbuilding Description: This article gets into the basics of metal working discussing...

Model Railroader 1977-09 Articles
...purpose of a sandblast system and then gets into how he built his own. Includes...

Model Railroader 2000-03 Articles
...Boats, ship building facility A New Tool Gets Me Off My Duff Page: 123...

About S-scale
...scale, generally the more expensive the hobby gets. The secondary reason for switching scales is...

Background Building #1
...a caulk to make sure no light gets through the gap. I used left over...

...the building, just in case some light gets through. I used some plastic clamps to...

Canonsburg Passenger Station - Right Wall Construction
...future using weathering powders. The door area gets the same two side pieces of styrene....

Oil Pump Jack
...three of the four 100-ohm resistors. This gets the motor started. Once started, it will...

getting
DCC - S-CAB
...being overcharged (and therefore explode), and from getting too low (which would permanently damage these...

...that the decoder is able to handle getting the commands via radio transmission rather than...

DCC - Tsunami Decoder Programming
...are pretty accurate and very helpful in getting you started. Installing the drivers was fairly...

LED Lighting
...focus, but I had a hard time getting a good shot. In the lower left-hand...

Hand-laying Track - 1. Preparing and Installing Ties
...hand that extra notification when it is getting too close to the blade area. The...

Hand-laying Track - 2. Preparing and Applying Ballast
...the rail. This prevents the ballast from getting caught up in the rail, and it...

...to my heart's content without the rail getting in the way. The ballast I...

Hand-building Turnouts - Code 55 N-scale Turnout
...from the copper, which is key to getting the solder to adhere to the ties...

Hand-building Turnouts - Code 83 S-scale Turnout
...and, in the next photo, I am getting ready to install the rail. The reason...

...feeder wire to the rail. I am getting ready to install that one next. And...

Painting - Airbrush Cleaning
...don't force it in. It could be getting stuck in the trigger. Remember the rectangular...

...you know how to do them, but getting through that first time is hard.

Painting - Airbrush Setup
...for an airbrushing session, although I am getting faster at it the more I do...

N-scale Equipment - Con-Cor 4-8-4 - Introduction
...problems were resolved, it started stuttering with getting little or no movement out of it....

N-scale Equipment - Con-Cor 4-8-4 - Mechanical Problems
...a side-effect of the motor and gears getting worn in. Two of the three sets...

N-scale Equipment - Kato 2-8-2 - DCC Conversion
...Motor has been reinserted into the frame. Getting the gears to line up and connect...

N-scale Equipment - Kato Passenger Cars - Coupler Conversion
...during normal usage of the car, so getting it close is good enough. Reinstall the...

N-scale Equipment - Life-Like SW9 - DCC Conversion
...wires because I was worried about them getting in the way of the worm gear...

N-scale Equipment - Rivarossi 2-8-8-2 - Coupler Conversion
...coupler being installed. The hardest part was getting the coupler to lie still on the...

N-scale Equipment - Rivarossi 2-8-8-2 - DCC Conversion
...check whether or not the decoder is getting any signal. I decided to wire both...

Scenery - Conifer Trees
...I have seen various techniques used for getting the two wires to spin, but I...

Scenery - Foreground Trees
...look nice, and also prevents you from getting stung by it). On a large tree...

...very easy to work with in me getting an order of the bags of leaves...

The Hobby - Changing Modeling Scales
...numbers on the locomotives and cars are getting harder to see. I find myself grabbing...

...Third, even though N scale equipment is getting better and better, there is still a...

...that you have some interest in "S"!). Getting involved or at least making contact with...

...used to hold my N-scale inventory are getting pretty bare. I am thinking about how...

...N-scale items on eBay, I am finally getting to the bottom of the barrel. I...

The Hobby - Clubs
...also had Z- and HO-scale divisions). After getting deeper involved, I also got more involved...

...Houston, Texas in January 2002. Frank is getting the DT100 throttle to select my E8...

Tools - Clamp Wall Rack
...so it took a bit of effort getting it up there. And here is my...

Tools - Fence Extension
...any more adjusting possible. The odds of getting that right while man-handling this beast are...

...any more adjusting possible. The odds of getting that right while man-handling this beast are...

Tools - Key-chain Video Camera
...the price is significantly lower, you are getting a version that may be labeled #11...

...labeled #11 or #16, but you are getting a cheap fake that has lower resolution...

Tools - Panel Cutting Sled
...square, which was a big help to getting the project started. I also bought a...

...seen in the photo below, I am getting ready to glue the poplar to the...

Tools - Router Table
...in Houston, I had a hard time getting them all. I encountered some blank stares...

Tools - Table Saw Overarm
...the extension table. The overarm assembly is getting ready to be installed. You can see...

Tools - Work Bench LED Lighting
...before updating this web page. I am getting ready to build three more trees. I...

Custom Track Solutions - Helix
...a big project, with the potential of getting bored with it along the way. I...

...me to make good progress while not getting burned out on it. First off...

Trackwork - Laying Flextrack
...finer jewelers file for the trimming and getting rid of the flash. The next photo...

Woodworking - Work Table
...the four 44" legs. The key to getting these corner brackets to create good results...

Equipment - PRR FA-2/FB-2 Cab Units - Regearing
...the old gear. The harder part is getting the universal joint to be removed. I...

Equipment - PRR FM Flat Car - Construction: Conclusion
...cars in general, so my skills are getting better. None of the four cars I...

Equipment - PRR FM Flat Car - Construction: Wheels and Couplers
...float above the car's sides. I am getting ready to glue it down. This makes...

Equipment - PRR H21a Hopper - Construction: Completion
...are permanently installed) to prevent them from getting too much of the over-spray. I had...

...no longer producing decal sets, these are getting harder to find anyway. For my PRR...

Equipment - B&O M53 Box Car - Construction: Body
...go. The instructions state to work on getting the underframe to fit in the body....

Equipment - PRR N5c Cabin Car - Construction: Completion
...either side, which prevents finger prints from getting on the plastic while you're handling it....

Equipment - PRR NW2 Switcher - Motor Replacement
...made it difficult was that I wasn't getting them into the right spot. There is...

Equipment - PRR RS-1 Road Switcher - S-CAB
...(kick-start) to "3". So far I am getting good response, although I'd like to have...

Equipment - PRR RS-1 Road Switcher - Construction: Chassis
...I wasn't about to risk not quite getting the brackets' location right and not being...

...and had a bit of a challenge getting it straight afterwards); second, be sure to...

Equipment - PRR RS-1 Road Switcher - Construction: Adding Details
...a photo of my simple jig for getting these grab irons to be at least...

...article, it appears that the odds of getting the handrails to come out looking nice...

Equipment - PRR X29 Box Car - Kit Construction
...plastic, so it should be no problem getting the truck mounting screw to get a...

Bear Creek & Eastern - Progress Report - 2007-10 Report
...and installed the ties and stained them. Getting ready to lay the rail. The next...

Bear Creek & Eastern - Progress Report - 2008-05 Report
...I did on this layout. I was getting frustrated with N-scale, and it was actually...

My Layouts
...hand-laying code 40 rail. Also, I was getting tired of dirty track problems. (more info...)...

P & C Railroad Version 2 - Progress Report
... 09/30/2000 Now we are getting somewhere! 2000-10 Report 10/28/2000...

P & C Railroad Version 2 - Progress Report - 2000-05 Report
...wasn't happy with my second attempt at getting the track down from the upper level,...

P & C Railroad Version 2 - Progress Report - 2000-08 Report
...left-hand corner. The revised Hershey module is getting track again. Here you can see the...

P & C Railroad Version 3 - Layout Design
...railroading materials storage only (the radius for getting in and out of the closet was...

P & C Railroad Version 3 - Progress Report - 2002-04 Report
...for the move is that I am getting to build a ten-level helix that will...

P & C Railroad Version 4 - Progress Report - 2004-02 Report
...surface were rounded so as to avoid getting hurt by them. They protrude about two...

P & C Railroad Version 4 - Progress Report - 2003-02 Report
...A friend of mine was thinking about getting it to integrate into a new section...

The PRR Chartiers Branch - Progress Report - 2009-04 Report
...of its legs is curved! I am getting ready to lay the ties in the...

The PRR Chartiers Branch - Progress Report - 2009-08 Report
...stub track across the crossing. I am getting ready to work on the wye turnout...

The PRR Chartiers Branch - Progress Report - 2011-08 Report
... I am finally getting around to stringing wire between the poles....

The PRR Chartiers Branch - Progress Report - 2013-01 Report
...(i.e. flip the turnout). I am now getting ready to install that system. I am...

The PRR Chartiers Branch - Progress Report - 2014-06 Report
...scratch-built one of them . I am getting ready to install it on the layout...

Railroading Books - 222 Tips for Building Model Railroad Structures
...2 Introduction 1 4 Getting Started with the Right Tools 2...

Railroading Books - How to Build Model Railroad Benchwork
...4 Introduction 1 5 Getting Started 2 14 Lumber, Fasteners,...

Railroading Books - Model Railroad Planning 1996
... Cadrail: A User's Perspective 78 Getting Beyond an Oval, With Staging 82...

Railroading Books - Work Extra
... Organized Junk 14 35 Getting Ready for Visitors 15 37...

...Ready for Visitors 15 37 Getting Closer to a Complete Model Railroad

Magazine Articles By Allan Crowe
...Crowe 07/05/2014 Getting Started with DCC Magazine: Railroad...

Magazine Articles By Andy Sperandeo
...include are scale drawings of the locomotive. Getting Started in Prototype Research Magazine:...

Magazine Articles By Anthony R. Curtis
...Curtis 07/05/2014 Getting Started (painting) Magazine: Model Railroader...

...tips and tricks to beginning model painters. Getting Started: Tools of the Electrical Trade Magazine:...

Magazine Articles By Clark Propst
...Layout Construction Description: The author is getting ready to model the town of Mason...

Magazine Articles By Dean Daughenbaugh
...towel in place for wheel cleaning, without getting caught by coupler trip pins.

Magazine Articles By Dennis Murphy
...ways to build a fence from scratch. Getting to Know AMI Instant Roadbed Magazine:...

Magazine Articles By Marty McGuirk
...can be incorporated into a layout's fascia. Getting Real: Flipping The Piers Magazine:...

Magazine Articles By Paul Schmidt
...parallel lines scribed onto a Plexiglass panel. Getting Started in Traction Magazine: Railroad...

Magazine Articles By Category: DCC
...He installed it in a Kato Mikado. Getting Started with DCC Magazine: Railroad...

Magazine Articles By Category: Electronics
...fusees are tied into his block-system layout. Getting Started: Tools of the Electrical Trade Magazine:...

Magazine Articles By Category: Layout Construction
...operators busy, such as the famous TimeSaver. Getting Real: Flipping The Piers Magazine:...

...Clark Propst Description: The author is getting ready to model the town of Mason...

Magazine Articles By Category: Locomotives - Traction
...Traction 07/05/2014 Getting Started in Traction Magazine: Railroad...

Magazine Articles By Category: Painting & Weathering
...billboards and for the sides of buildings. Getting Started (painting) Magazine: Model Railroader...

Magazine Articles By Category: Railroads
...can be designed to model this railroad. Getting Started in Prototype Research Magazine:...

Magazine Articles By Category: Tools
...towel in place for wheel cleaning, without getting caught by coupler trip pins.

Magazine Articles By Category: Track
...that make the process go much smoother. Getting to Know AMI Instant Roadbed Magazine:...

Model Railroad Hobbyist 2010-11/12 Articles
...scene that revolves around a large tree. Getting Real: Flipping The Piers Page: 137...

Model Railroader 1989-09 Articles
...of motive power during an operating session. Getting Started (painting) Page: 110 Author:...

Model Railroader 1990-06 Articles
...for calculating plate girder bridge depth ratios. Getting Started: Tools of the Electrical Trade Page:...

Model Railroader 2003-02 Articles
...of people who create G-scale portable modules. Getting Started in Prototype Research Page: 106...

N-Scale 2002-03/04 Articles
...towel in place for wheel cleaning, without getting caught by coupler trip pins. Modifying a...

N-Scale 2006-05/06 Articles
...built to mark off track-side ditches accurately. Getting to Know AMI Instant Roadbed Page:...

Railroad Model Craftsman 2002-11 Articles
...car. Model and construction photos. Big article! Getting Started in Traction Page: 74 Author:...

Railroad Model Craftsman 2007-02 Articles
...model ridge shingles on the roof line. Getting Started with DCC Page: 82 Author:...

Railroad Model Craftsman 2008-11 Articles
...Layout Construction Description: The author is getting ready to model the town of Mason...

Magazine Articles for HO Scale
...aisle, so the interior is fully visible. Getting Real: Flipping The Piers Magazine:...

Magazine Articles for N Scale
...towel in place for wheel cleaning, without getting caught by coupler trip pins. When Boxcars...

Background Building #1
...real world. I had a hard time getting a good photo of the building with...

Canonsburg Milling
...I don't know if Plastruct's mold is getting old, but its bricks aren't as well...

Canonsburg Passenger Station - Bay Window Construction
...be added later on. Here I am getting ready to install the bay window sections...

...passengers to interact with the ticketmaster without getting hit by passing trains.

Deck Plate Girder Bridge - Deck Plate Girder Bridge
...and the space within the framework is getting quite tight and crowded. I decided to...

Deck Plate Girder Bridge - Removable Deck Plate Girder Bridge
...be a bit more prototypically accurate. I'm getting ready to paint the handrail with Floquil's...

Furniture Factory - Main Factory Building
...the crates are being loading), another employee getting ready to grab a chair, and four...

O'Brien Steel Construction Co. - Construction
...I wound up having a hard time getting all the tabs to line up. I...

Oil Pump Jack
...that a lot of people had problems getting them to animate properly. First, you have...

Structures - N-scale Turntable - Bridge
...detailing the bridge itself without the shaft getting in the way. After studying some prototype...

...then laid standard ties on the template getting them to stick to the tape. There...

...the wire soldered to the rail and getting ready to be glued down to the...

Scratch-built Turntable - Diamond Scale N-135 Kit
...five-minute epoxy). I had a hard time getting the rails to sit correctly on the...

Scratch-built Turntable - Diamond Scale Motor Kit
...to be aware of what you are getting yourself into. The first step is to...

Scratch-built Turntable - Bridge Construction
...detailing the bridge itself without the shaft getting in the way. After studying some prototype...

...then laid standard ties on the template getting them to stick to the tape. There...

...the wire soldered to the rail and getting ready to be glued down to the...

getz
Magazine Articles By Author
...Charlie Conway - 1 articles Charlie Getz - 2 articles Chick Curtis...

Magazine Articles By Charlie Getz
My Library - Magazine Articles By Charlie Getz My Library - Magazine Articles By Charlie...

...My Library - Magazine Articles By Charlie Getz 07/05/2014 The...

Magazine Articles By Category: Model Railroads and People
...Page: 82 Author: Charlie Getz Description: The author describes some of...

...Page: 86 Author: Charlie Getz Description: Charlie talks about how this...

Narrow Gauge And Short Line Gazette 2007-01/02 Articles
...Page: 82 Author: Charlie Getz Category: Model Railroads and People...

Narrow Gauge And Short Line Gazette 2008-09/10 Articles
...Page: 86 Author: Charlie Getz Category: Model Railroads and People...

gg-1
Equipment - PRR RS-1 Road Switcher - Construction: Painting
...(rather it is for F-units, E-units, and GG-1), however, the font and numbers all matched...

Magazine Articles By Category: Railroads
...Amtrak equipment includes the TurboTrain and a GG-1. BC Rail from North Vancouver to Squamish...

Railroad Model Craftsman 1972-09 Articles
...Amtrak equipment includes the TurboTrain and a GG-1. Basics of Steam Part 3 Page:...

gg-1’s
Railroading Videos - The Pennsylvania Railroad
...Centipedes, and Sharks, "F" units, early Geeps, GG-1’s, Alco RS-3’s, etc. Locations covered are: Tunnel...

gg1
Railroading Books - The History of the Pennsylvania Railroad
...a disproportionate number of photos of the GG1, and many photos of Conrail engines. There...

Magazine Articles By Bruce F. Smith
...barrels (i.e the load). Broadway Limited International GG1 Review Magazine: The Keystone Modeler...

Magazine Articles By Chuck Blardone
... Museums Description: The N6B and GG1 that are on display at the ex-PRR...

Magazine Articles By Jim Hediger
...models. Handy glue applicator. Weathering a PRR GG1. Finding a substitute paint for 410M line...

Magazine Articles By Category: Locomotives - Electric
... 07/05/2014 Broadway Limited International GG1 Review Magazine: The Keystone Modeler...

Magazine Articles By Category: MRR Tips & Tricks
...models. Handy glue applicator. Weathering a PRR GG1. Finding a substitute paint for 410M line...

Magazine Articles By Category: Museums
...Chuck Blardone Description: The N6B and GG1 that are on display at the ex-PRR...

Model Railroader 2006-09 Articles
...models. Handy glue applicator. Weathering a PRR GG1. Finding a substitute paint for 410M line...

The Keystone Modeler 02 September 2003 Articles
...only HO and O-scales. Broadway Limited International GG1 Review Page: 12 Author:...

The Keystone Vol 47 No.2 Articles
... Museums Description: The N6B and GG1 that are on display at the ex-PRR...

Magazine Articles for HO Scale
...Includes one model photo. Broadway Limited International GG1 Review Magazine: The Keystone Modeler...

gher
Magazine Articles By Author
...Richard Wehr - 1 articles Rick Gher - 1 articles Rick Johnson...

Magazine Articles By Rick Gher
My Library - Magazine Articles By Rick Gher My Library - Magazine Articles By Rick...

...My Library - Magazine Articles By Rick Gher 07/05/2014 Kato...

Magazine Articles By Category: Locomotives - Diesel
...Page: 71 Author: Rick Gher Scale: HO Description: The author...

Railroad Model Craftsman 1996-03 Articles
...Page: 71 Author: Rick Gher Category: Locomotives - Diesel Scale:...

Magazine Articles for HO Scale
...Page: 71 Author: Rick Gher Category: Locomotives - Diesel Description:...

ghq
N-scale Equipment - Kato 2-8-2 - Introduction
...L1 class locomotives. An upgrade kit from GHQ will fix that (the kit is, unfortunately,...

Magazine Articles By Dean Daughenbaugh
...cars needed for tie replacement, including a GHQ Backhoe. Wheel Cleaning Made Easy Magazine:...

Magazine Articles By Gregg Scott
...a Kato Pacific Japanese 4-6-2, converted with GHQ's W-3 conversion kit, to build a NP...

Magazine Articles By Scott Seekins
...the author weathered the C&NW # 48567 GHQ depressed center flat car. Flat Car Loads...

Magazine Articles By Category: Freight Cars - Flat Cars
...the author weathered the C&NW # 48567 GHQ depressed center flat car. Freelanced Narrow Gauge...

Magazine Articles By Category: Locomotives - Steam
...a Kato Pacific Japanese 4-6-2, converted with GHQ's W-3 conversion kit, to build a NP...

Magazine Articles By Category: Trains
...cars needed for tie replacement, including a GHQ Backhoe. Riding the "Cookie Box" Extra Magazine:...

N-Scale 2000-05/06 Articles
...the author weathered the C&NW # 48567 GHQ depressed center flat car. Wiring Tips Page:...

N-Scale 2000-07/08 Articles
...a Kato Pacific Japanese 4-6-2, converted with GHQ's W-3 conversion kit, to build a NP...

N-Scale 2003-03/04 Articles
...cars needed for tie replacement, including a GHQ Backhoe. Harrytown, Santa Alicia & Santa Elena...

Magazine Articles for N Scale
...the author weathered the C&NW # 48567 GHQ depressed center flat car. Desert Railroading on...

...cars needed for tie replacement, including a GHQ Backhoe. Puget Sound Tie Replacement Train Part...

...a Kato Pacific Japanese 4-6-2, converted with GHQ's W-3 conversion kit, to build a NP...

giannovario
DCC - S-CAB
...4-4-0 Joe Giannovario (O-scale GP9)...

Railroading Books - Detailing Track
... 81 Commercial Track by Joe Giannovario 8 93 Anatomy of an...

Magazine Articles By Author
...Joe Fugate - 2 articles Joe Giannovario - 1 articles Joe Luber...

Magazine Articles By Joe Giannovario
My Library - Magazine Articles By Joe Giannovario My Library - Magazine Articles By Joe...

...My Library - Magazine Articles By Joe Giannovario 07/05/2014 Really...

Magazine Articles By Category: Structures
...Page: 34 Author: Joe Giannovario Description: Printing a scale drawing to...

O Scale Trains Magazine 33 July 2007 Articles
...Page: 34 Author: Joe Giannovario Category: Structures Description: Printing...

giant
P & C Railroad Version 3 - Progress Report
... 12/30/2002 More track and a giant mountain! 2003-01 Report 01/29/2003...

giants
Railroading Books - The Steam Locomotive
...5 114 Last of the Giants The remaining huge engines built in the...

gibbs
Magazine Articles By Author
...Bob Winterton - 1 articles Bobber Gibbs - 3 articles Boone Morrison...

Magazine Articles By Bobber Gibbs
My Library - Magazine Articles By Bobber Gibbs My Library - Magazine Articles By Bobber...

...My Library - Magazine Articles By Bobber Gibbs 07/05/2014 Narrow...

Magazine Articles By Category: Model Railroad Philosophy
...Page: 14 Author: Bobber Gibbs Scale: O Description: Why narrow...

...Page: 45 Author: Bobber Gibbs Description: The author answers his own...

Magazine Articles By Category: Product Review
...Page: 39 Author: Bobber Gibbs Scale: O Description: Bachmann's Forney...

O Scale Trains Magazine 02 May 2002 Articles
...Page: 14 Author: Bobber Gibbs Category: Model Railroad Philosophy Scale:...

O Scale Trains Magazine 32 May 2007 Articles
...Page: 45 Author: Bobber Gibbs Category: Model Railroad Philosophy Description:...

O Scale Trains Magazine 33 July 2007 Articles
...Page: 39 Author: Bobber Gibbs Category: Product Review Scale:...

Magazine Articles for O Scale
...Page: 39 Author: Bobber Gibbs Category: Product Review Description:...

...Page: 14 Author: Bobber Gibbs Category: Model Railroad Philosophy Description:...

gibes
Magazine Articles By Author
...Rost - 1 articles Albert P. Gibes - 1 articles Alden Armstrong...

Magazine Articles By Albert P. Gibes
...Library - Magazine Articles By Albert P. Gibes My Library - Magazine Articles By Albert...

...Library - Magazine Articles By Albert P. Gibes 07/05/2014 Pekin...

Magazine Articles By Category: Layouts
... 22 Author: Albert P. Gibes Scale: HO Pennsylvania, Allegheny & Western...

NMRA Bulletin 2002-08 Articles
... 22 Author: Albert P. Gibes Category: Layouts Scale: HO...

Magazine Articles for HO Scale
... 22 Author: Albert P. Gibes Category: Layouts Peninsula Club's New...

gibson
Magazine Articles By Author
...Doak, Jr. - 1 articles George Gibson - 1 articles George Hall...

Magazine Articles By George Gibson
My Library - Magazine Articles By George Gibson My Library - Magazine Articles By George...

...My Library - Magazine Articles By George Gibson 07/05/2014 LED...

Magazine Articles By Category: Layout Lighting
...Page: 51 Author: George Gibson Description: Using new LED ribbon strips...

Railroad Model Craftsman 2012-01 Articles
...Page: 51 Author: George Gibson Category: Layout Lighting Description:...

gif
Research - PRR Steam Locomotives
...Steam Locomotive Class Description (with representative gif images) Roster of Every Steam Class...

gift
My Library - Photo Albums - Southern Forest Heritage Museum
...known as the Commissary. It houses the gift shop, the museum, a small cafeteria, restrooms,...

gil
Railroading Books - Great Model Railroads 1994
...layout article by Paul Dolkos. 44 Gil Freitag's Stony Creek & Western: an HO-scale...

...an HO-scale Classic Jim Kelly's article about Gil's fantastic layout. 56 Prototype Free-lancing on...

Magazine Articles By Tony Koester
...Seattle, WA. Of particular interest is the Gil Freitag model of Carson City stamp mill...

Magazine Articles By Category: Model Railroads and People
...Seattle, WA. Of particular interest is the Gil Freitag model of Carson City stamp mill...

Railroad Model Craftsman 1972-11 Articles
...Seattle, WA. Of particular interest is the Gil Freitag model of Carson City stamp mill...

Railroading Videos - Great Model Railroads Vol 13
...is the work of master structure builder, Gil Freitag. Gil has won many, many NMRA...

...work of master structure builder, Gil Freitag. Gil has won many, many NMRA National Contests...

Furniture Factory - Lumber Shed
...a similar structure on Master Model Railroader Gil Freitag's layout here in Houston. My plan...

gilbert
General Rolling Stock - Dragline Buckets Load
...two packages of these dragline buckets from Gilbert Lacroix, owner of GLX Scale Models, Inc....

...All Sizes! Gilbert warned that there is some flash to...

Magazine Articles By Author
...articles Gerry Leone - 12 articles Gilbert Moreno - 1 articles Glenn Miller...

Magazine Articles By Gilbert Moreno
My Library - Magazine Articles By Gilbert Moreno My Library - Magazine Articles By...

...Moreno My Library - Magazine Articles By Gilbert Moreno 07/05/2014...

Magazine Articles By Category: Layouts - N - Small
...1991-01 Page: 102 Author: Gilbert Moreno Scale: N Description: A...

Model Railroader 1991-01 Articles
...RR Page: 102 Author: Gilbert Moreno Category: Layouts - N...

Magazine Articles for N Scale
...1991-01 Page: 102 Author: Gilbert Moreno Category: Layouts - N...

gilden
Magazine Articles By Gary Hoover
...Gray's O-scale, John Kalin's Sn3, and Herb Gilden's HO-scale layouts. Rushing Water Magazine:...

Magazine Articles By Category: Model Railroad Shows
...Gray's O-scale, John Kalin's Sn3, and Herb Gilden's HO-scale layouts. Report on the 2010 Toronto...

Railroad Model Craftsman 2010-04 Articles
...Gray's O-scale, John Kalin's Sn3, and Herb Gilden's HO-scale layouts. Loading Coal Page: 68...

gilead
Magazine Articles By Michael Rogers
... 07/05/2014 Mount Gilead, a Town on the Move Magazine:...

Magazine Articles By Category: Layout Design
...that isn't possible in real life? Mount Gilead, a Town on the Move Magazine:...

Model Railroader 1987-11 Articles
...features nice scenery and expansive-looking backdrops. Mount Gilead, a Town on the Move Page:...

Magazine Articles for HO Scale
...Includes a lower-level revision track plan. Mount Gilead, a Town on the Move Magazine:...

gill
Magazine Articles By Author
...Bill Fraley - 7 articles Bill Gill - 5 articles Bill Gruber...

...Gary Wright - 1 articles Gaylord Gill - 1 articles Gene Clements...

Magazine Articles By Bill Gill
My Library - Magazine Articles By Bill Gill My Library - Magazine Articles By Bill...

...My Library - Magazine Articles By Bill Gill 07/05/2014 Acres...

Magazine Articles By Gaylord Gill
My Library - Magazine Articles By Gaylord Gill My Library - Magazine Articles By Gaylord...

...My Library - Magazine Articles By Gaylord Gill 07/05/2014 Meet...

Magazine Articles By Malcolm Furlow
...figure-8), control panel designed, and wiring. Fred Gill's Diamond Valley Line Magazine: Model...

Magazine Articles By Category: Layouts - HO - Medium
...features nice scenery and expansive-looking backdrops. Fred Gill's Diamond Valley Line Magazine: Model...

Magazine Articles By Category: Model Railroads and People
...Page: 13 Author: Gaylord Gill Description: A behind-the-scene look at Brooks...

Magazine Articles By Category: Scenery - Trees, Shrubs, Bushes
...Page: 81 Author: Bill Gill Description: Using a thin piece of...

Magazine Articles By Category: Structures
...Page: 45 Author: Bill Gill Description: Using computer graphics software, the...

...Page: 56 Author: Bill Gill Description: The author describes how he...

Magazine Articles By Category: Structures - Towns/Cities
...Page: 56 Author: Bill Gill Scale: HO Description: The author...

Magazine Articles By Category: Tools
...Page: 77 Author: Bill Gill Description: Think outside the box to...

Model Railroader 1983-07 Articles
...used the Hornsby Zero 1 system. Fred Gill's Diamond Valley Line Page: 66 Author:...

NASG Dispatch 2010-02 Articles
...Page: 13 Author: Gaylord Gill Category: Model Railroads and People...

Railroad Model Craftsman 2007-01 Articles
...Page: 56 Author: Bill Gill Category: Structures - Towns/Cities Scale:...

Railroad Model Craftsman 2008-11 Articles
...Page: 81 Author: Bill Gill Category: Scenery - Trees, Shrubs,...

Railroad Model Craftsman 2010-05 Articles
...Page: 77 Author: Bill Gill Category: Tools Description: Think...

Railroad Model Craftsman 2010-10 Articles
...Page: 45 Author: Bill Gill Category: Structures Description: Using...

Railroad Model Craftsman 2011-09 Articles
...Page: 56 Author: Bill Gill Category: Structures Description: The...

Magazine Articles for HO Scale
...Page: 56 Author: Bill Gill Category: Structures - Towns/Cities Description:...

Magazine Articles for HOn3 Scale
...features nice scenery and expansive-looking backdrops. Fred Gill's Diamond Valley Line Magazine: Model...

gilliland
Magazine Articles By Author
...Gerald Brothers - 1 articles Gerald Gilliland - 1 articles Gerald McGee...

...Gerry Evans - 3 articles Gerry Gilliland - 1 articles Gerry Leone...

Magazine Articles By Gerald Gilliland
My Library - Magazine Articles By Gerald Gilliland My Library - Magazine Articles By Gerald...

...My Library - Magazine Articles By Gerald Gilliland 07/05/2014 Jefmar's...

Magazine Articles By Gerry Gilliland
My Library - Magazine Articles By Gerry Gilliland My Library - Magazine Articles By Gerry...

...My Library - Magazine Articles By Gerry Gilliland 07/05/2014 Action...

Magazine Articles By Category: Locomotives - Diesel
...Page: 172 Author: Gerry Gilliland Scale: HO Description: This article...

Magazine Articles By Category: Structures - Industrial
...Page: 122 Author: Gerald Gilliland Scale: HO Description: The author...

Model Railroader 1991-01 Articles
...Page: 172 Author: Gerry Gilliland Category: Locomotives - Diesel Scale:...

Model Railroader 1991-03 Articles
...Page: 122 Author: Gerald Gilliland Category: Structures - Industrial Scale:...

Magazine Articles for HO Scale
...Page: 172 Author: Gerry Gilliland Category: Locomotives - Diesel Description:...

...Page: 122 Author: Gerald Gilliland Category: Structures - Industrial Description:...

gilpin
Magazine Articles By Albert E. Turner, Jr.
...Jr. 07/05/2014 Gilpin & Blackhawk Magazine: Railroad Model...

Magazine Articles By Joseph Crea, Darel Leedy, Keith Pashina
... 07/05/2014 Three Ways to Gilpin Magazine: Railroad Model Craftsman 2003-09...

...prototype information and photos about Colorado's two-foot Gilpin tramway. One layout is in 1/2" scale,...

Magazine Articles By Mark Baldwin
... 07/05/2014 The Virtual Gilpin Magazine: Railroad Model Craftsman 2005-08...

...has some prototype photos of the real Gilpin Tramway. The Virtual Gilpin Part II Magazine:...

...of the real Gilpin Tramway. The Virtual Gilpin Part II Magazine: Railroad Model...

...world. Includes a side bar on the Gilpin Tram wreck of 1897.

Magazine Articles By Category: Layouts
...of people who create G-scale portable modules. Gilpin & Blackhawk Magazine: Railroad Model...

...and the CTC control system. The Virtual Gilpin Magazine: Railroad Model Craftsman 2005-08...

...has some prototype photos of the real Gilpin Tramway. The Virtual Gilpin Part II Magazine:...

...of the real Gilpin Tramway. The Virtual Gilpin Part II Magazine: Railroad Model...

...world. Includes a side bar on the Gilpin Tram wreck of 1897. The Weber Valley...

...weathering is very realistic. Three Ways to Gilpin Magazine: Railroad Model Craftsman 2003-09...

...prototype information and photos about Colorado's two-foot Gilpin tramway. One layout is in 1/2" scale,...

Railroad Model Craftsman 1977-08 Articles
...of the sidewinder breed of steam locomotives. Gilpin & Blackhawk Page: 38 Author:...

Railroad Model Craftsman 2003-09 Articles
...one Railway Express terminal.. Three Ways to Gilpin Page: 86 Author: Joseph...

...prototype information and photos about Colorado's two-foot Gilpin tramway. One layout is in 1/2" scale,...

Railroad Model Craftsman 2005-08 Articles
... 07/05/2014 The Virtual Gilpin Page: 50 Author: Mark...

...has some prototype photos of the real Gilpin Tramway. Replacement Grain Hatches Page: 58...

Railroad Model Craftsman 2005-09 Articles
...and learn some new techniques. The Virtual Gilpin Part II Page: 60 Author:...

...world. Includes a side bar on the Gilpin Tram wreck of 1897. Kitbashing a Santa...

Magazine Articles for HO Scale
...to model a pier in his layout. Gilpin & Blackhawk Magazine: Railroad Model...

gilt
Magazine Articles By Gerry Leone
...construction diagrams and photos. Scratchbuilding the Farmer's Gilt Edge Creamery Magazine: Railroad Model...

Magazine Articles By Category: Structures - Industrial
...photos, and scale drawings. Scratchbuilding the Farmer's Gilt Edge Creamery Magazine: Railroad Model...

Railroad Model Craftsman 2003-05 Articles
...set in Northern California. Scratchbuilding the Farmer's Gilt Edge Creamery Page: 58 Author:...

Magazine Articles for HO Scale
...freight cars as well. Scratchbuilding the Farmer's Gilt Edge Creamery Magazine: Railroad Model...

gin
Magazine Articles By Cyril Durrenberger
...into a prototypically-correct model. Modeling a Cotton Gin Magazine: Model Railroader 1982-06 Page:...

...buildings that make up a complete cotton gin, overhead drawing of the layout of the...

Magazine Articles By Category: Structures - Industrial
...Gauley Valley Feeds photo. Modeling a Cotton Gin Magazine: Model Railroader 1982-06 Page:...

...buildings that make up a complete cotton gin, overhead drawing of the layout of the...

Model Railroader 1982-06 Articles
...of the control panel. Modeling a Cotton Gin Page: 70 Author: Cyril...

...buildings that make up a complete cotton gin, overhead drawing of the layout of the...

Magazine Articles for HO Scale
...model of this engine. Modeling a Cotton Gin Magazine: Model Railroader 1982-06 Page:...

...buildings that make up a complete cotton gin, overhead drawing of the layout of the...

girder
Equipment - PRR RS-1 Road Switcher - Construction: Chassis
...battery box, the fuel tank, and the girder. This photo shows the three parts that...

...so when you assemble them to the girder, they must be assembled in mirror image,...

...make sure the back side of the girder is truly flat and straight before gluing...

...mounting bar on the back of the girder is at a 90-degree angle to the...

...90-degree angle to the back of the girder, because that will be glued to the...

...underside of the chassis later and the girder needs to sit perpendicular to the chassis....

...sit to determine where to install the fuel-tank-battery-box-girder sub-assembly. The girder's 90-degree mounting bracket comes...

...where to install the fuel-tank-battery-box-girder sub-assembly. The girder's 90-degree mounting bracket comes with a dimple...

Crystal Creek Module - Progress Report - 2005-02 Report
...seven will be covered with fake plate girder bridges. These represent ballasted bridges, so I...

...I built these on the Plate Girder Bridge page . For the one remaining...

The PRR Chartiers Branch - Progress Report - 2009-02 Report
...space in the sub-roadbed where the plate girder bridge will be installed. I then...

The PRR Chartiers Branch - Progress Report - 2012-03 Report
... 03/26/2012 I built a plate girder bridge to span the space between...

Railroading Books - Bridge and Trestle Handbook
...cantilever, continuous, arch, or suspension, beam, plate girder, or truss, and types of trusses. 4...

...to model them. 9 38 Plate-Girder Bridges This chapters dives into the details...

...into the details of how a plate girder bridge is constructed and how we can...

...can model them. It covers the plate girder, the deck plate-girder bridge type, the through...

...It covers the plate girder, the deck plate-girder bridge type, the through plate-girder bridge, how...

...the deck plate-girder bridge type, the through plate-girder bridge, how to deal with bridges on...

Railroading Books - Model Railroad Bridges & Trestles
...in the U.S., determining load capabilities, beam, girder, and truss bridges, trestles, viaducts, and culverts,...

... 8 Beam and Through Plate Girder Bridges This article written by Harold Russell...

...beam systems for through bridges, through plate girder bridges, knee and lateral bracing on girder...

...girder bridges, knee and lateral bracing on girder bridges, double-track bridges, skewed and curved railroad...

...returns in this chapter discussing deck plate girder bridges, deck truss bridges, bridges on curves,...

...to add drama. 9 54 Girder Bridge and Approaches Jack Work discusses how...

...Jack Work discusses how to build a girder bridge and approaches that rest on trestle...

...project by describing how to build the girder span. 10 58 Modeling a...

...Kalbfleisch describes how he built his two-truss, two-girder span bridge. 16 84 Compact...

...built a Scherzer rolling lift span of girder. 17 92 Modeling the Gloucester...

...Creek Bridge. 20 116 Short Girder-type Overpass This chapter discusses how the real...

Railroading Books - The Cyclopedia of Industrial Modeling
...Mill Tractor 24 87 Simple Girder and Bridge Piers 25 88...

Magazine Articles By Al Westerfield
...This installment covers building a riveted plate girder bridge. Prototype and model photos are included,...

Magazine Articles By Bob Fink
... A Basic program for calculating plate girder bridge depth ratios. Computers in Model Railroading...

Magazine Articles By Gordon Odegard
...set-up for photographing the layout. Modified L Girder Magazine: Model Railroader 1978-01 Page:...

... Describes Gordon's changes to the standard L-girder layout benchwork created by Linn Westcott. MR...

Magazine Articles By Harvey J. Simon
...Description: This installment covers laying the girder rail and flextrack for trolley. Includes many...

Magazine Articles By John Gerdes
...photos of how to build a deck girder bridge. Maintenance Road Magazine: N-Scale...

Magazine Articles By Ken Patterson
... 07/05/2014 Building a Modern Plate Girder Bridge Magazine: Railroad Model Craftsman...

Magazine Articles By Malcolm Furlow
...drawings show how to build a deck girder bridge under curved track), construction of the...

Magazine Articles By Tom Persoon
... 07/05/2014 A Bridge Girder Load for the Davies Steel Gondola Magazine:...

... HO Description: Using Atlas bridge girder kit parts to build a load. Shows...

Magazine Articles By Category: Electronics
... A Basic program for calculating plate girder bridge depth ratios. Computers in Model Railroading...

Magazine Articles By Category: Freight Car Loads
... 07/05/2014 A Bridge Girder Load for the Davies Steel Gondola Magazine:...

... HO Description: Using Atlas bridge girder kit parts to build a load. Shows...

Magazine Articles By Category: Layout Construction
...drawings show how to build a deck girder bridge under curved track), construction of the...

...Description: This installment covers laying the girder rail and flextrack for trolley. Includes many...

...(and the prototype) is operated. Modified L Girder Magazine: Model Railroader 1978-01 Page:...

... Describes Gordon's changes to the standard L-girder layout benchwork created by Linn Westcott. My...

Magazine Articles By Category: Structures - Bridges
...to create concrete piers and erect a deck-girder bridge on top of them has parts...

...N Description: The author scratchbuilds a through-girder bridge. The article has step-by-step photos, prototype...

...photo, and diagrams. Building a Modern Plate Girder Bridge Magazine: Railroad Model Craftsman...

...photos of how to build a deck girder bridge. Kitbashing the Walthers N Scale Truss...

...This installment covers building a riveted plate girder bridge. Prototype and model photos are included,...

Model Railroader 1978-01 Articles
...some photos of the exhibit. Modified L Girder Page: 141 Author: Gordon...

... Describes Gordon's changes to the standard L-girder layout benchwork created by Linn Westcott.

Model Railroader 1988-02 Articles
...drawings show how to build a deck girder bridge under curved track), construction of the...

Model Railroader 1990-06 Articles
... A Basic program for calculating plate girder bridge depth ratios. Getting Started: Tools of...

Model Railroader 1999-11 Articles
...Description: This installment covers laying the girder rail and flextrack for trolley. Includes many...

N-Scale 2003-05/06 Articles
...photos of how to build a deck girder bridge. Puget Sound Tie Replacement Train Part...

Railroad Model Craftsman 1979-03 Articles
...This installment covers building a riveted plate girder bridge. Prototype and model photos are included,...

Railroad Model Craftsman 2010-08 Articles
... 07/05/2014 Building a Modern Plate Girder Bridge Page: 38 Author:...

Scale Rails 2003-10 Articles
... 07/05/2014 A Bridge Girder Load for the Davies Steel Gondola Page:...

... HO Description: Using Atlas bridge girder kit parts to build a load. Shows...

Magazine Articles for HO Scale
...structure in Black Hawk, Colorado. A Bridge Girder Load for the Davies Steel Gondola Magazine:...

...Car Loads Description: Using Atlas bridge girder kit parts to build a load. Shows...

...and model photos. Building a Modern Plate Girder Bridge Magazine: Railroad Model Craftsman...

...drawings show how to build a deck girder bridge under curved track), construction of the...

...Description: This installment covers laying the girder rail and flextrack for trolley. Includes many...

...This installment covers building a riveted plate girder bridge. Prototype and model photos are included,...

Magazine Articles for N Scale
...to create concrete piers and erect a deck-girder bridge on top of them has parts...

...Bridges Description: The author scratchbuilds a through-girder bridge. The article has step-by-step photos, prototype...

...photos of how to build a deck girder bridge. Improving Bachmann's Amfleet Cars Magazine:...

Sitemap by Page Titles
... March 18, 2014 Deck Plate Girder Bridge March 02, 2013 -...

...February 02, 2009 - Deck Plate Girder Bridge April 07, 2009 -...

...07, 2009 - Removable Deck Plate Girder Bridge April 04, 2012 Electronics...

...4-8-8-4 October 02, 2013 Plate Girder Bridge September 11, 2005 Product...

Sitemap by Last-modified Date
...March 02, 2013 - Deck Plate Girder Bridge - O'Brien Steel Construction Co....

...April 04, 2012 - Deck Plate Girder Bridge - Removable Deck Plate Girder Bridge...

...Plate Girder Bridge - Removable Deck Plate Girder Bridge March 26, 2012 - The...

...April 07, 2009 - Deck Plate Girder Bridge - Deck Plate Girder Bridge April...

...Deck Plate Girder Bridge - Deck Plate Girder Bridge April 05, 2009 - S-scale...

...February 02, 2009 - Deck Plate Girder Bridge - Abutments January 20, 2009 -...

...Flanges September 11, 2005 - Plate Girder Bridge August 30, 2005 - Crystal...

Deck Plate Girder Bridge
Peter's Model Railroading - Deck Plate Girder Bridge Deck Plate Girder Bridge Abutments...

...- Deck Plate Girder Bridge Deck Plate Girder Bridge Abutments 02/02/2009 Preparing...

...Preparing and installing cast abutments. Deck Plate Girder Bridge 04/07/2009 Building two...

...versions of the bridge. Removable Deck Plate Girder Bridge 04/04/2012 Building a...

Deck Plate Girder Bridge - Abutments
Peter's Model Railroading - Deck Plate Girder Bridge - Abutments Deck Plate Girder Bridge...

...Plate Girder Bridge - Abutments Deck Plate Girder Bridge - Abutments...

...Line layout I needed two steel plate girder deck bridges. Most of these types of...

...of the stone for a single-track plate girder bridge abutment (measurements are in inches). Again,...

Deck Plate Girder Bridge - Deck Plate Girder Bridge
Peter's Model Railroading - Deck Plate Girder Bridge - Deck Plate Girder Bridge Deck...

...Deck Plate Girder Bridge - Deck Plate Girder Bridge Deck Plate Girder Bridge - Deck...

...- Deck Plate Girder Bridge Deck Plate Girder Bridge - Deck Plate Girder Bridge...

...Deck Plate Girder Bridge - Deck Plate Girder Bridge 04/07/2009...

...once the ties go on. The front girder received most of the attention, because, as...

...used .040" thick styrene sheet for the girder plates (Evergreen part #9040), two packages of...

Deck Plate Girder Bridge - Removable Deck Plate Girder Bridge
Peter's Model Railroading - Deck Plate Girder Bridge - Removable Deck Plate Girder Bridge...

...Plate Girder Bridge - Removable Deck Plate Girder Bridge Deck Plate Girder Bridge - Removable...

...Removable Deck Plate Girder Bridge Deck Plate Girder Bridge - Removable Deck Plate Girder Bridge...

...Plate Girder Bridge - Removable Deck Plate Girder Bridge 04/04/2012...

...side of the bridge. These represent the girder support angles. This close-up photo shows the...

Structures
... scratch-built small factory. (S-scale) Deck Plate Girder Bridge 04/04/2012 Cast abutments,...

...Kit built with operating motor. (N-scale) Plate Girder Bridge 09/11/2005 scratch-built (fake)...

Plate Girder Bridge
Peter's Model Railroading - Plate Girder Bridge Plate Girder Bridge...

...Model Railroading - Plate Girder Bridge Plate Girder Bridge 09/11/2005...

...to be simple and shallow. The plate girder bridge seemed to be the right type...

...I made them. They are fake plate girder bridges because I simply attached the sides...

...Mallery to find out more about plate girder bridges. It has design diagrams and a...

...right template for the curves some plate girder bridges have. I used that to trace...

girder-type
Railroading Books - Model Railroad Bridges & Trestles
...Creek Bridge. 20 116 Short Girder-type Overpass This chapter discusses how the real...

girders
Magazine Articles By Charles J. Devine
...metal, gears, steel plates, storage tanks, plate girders, lumber, structural steel, boxes, and the "flat...

Magazine Articles By Category: Freight Car Loads
...metal, gears, steel plates, storage tanks, plate girders, lumber, structural steel, boxes, and the "flat...

N Scale Railroading 2003-05/06 Articles
...metal, gears, steel plates, storage tanks, plate girders, lumber, structural steel, boxes, and the "flat...

Magazine Articles for N Scale
...metal, gears, steel plates, storage tanks, plate girders, lumber, structural steel, boxes, and the "flat...

Bascule Bridge
...exploded view of the three types of girders used on this bridge. The article contains...

Deck Plate Girder Bridge - Deck Plate Girder Bridge
...S-scale layout. Their primary components are the girders, so I'll start with that first. The...

...basic styrene pieces. I built the plate girders from 0.030" thick styrene. I carefully cut...

...in the photo. Here are the two girders in their approximate location. I misjudged their...

...be able to make out under the girders. The remainder of this project uses only...

...building the frame work between the two girders. Because of the fact that this bridge...

...temporary strips on the bottom of the girders while they rested in their approximate positions....

...to measure the height of the plate girders and transfer that dimension to the .040"...

...top and bottom edges of the plate girders. The next photo shows the setup I...

...aligned with the edges of the plate girders. Here the top one is being glued...

...these were installed, I placed the plate girders on the abutments, held them down with...

...this. I installed them between the plate girders, and, after sufficient drying time, I carefully...

girl
Product Photos - Railmaster
...eBay. It is part #110, a "trendy" girl with two Poodles. This is from the...

...Zealand Railmaster. These are pewter metal. The girl is 5'9" tall and the dogs are...

girls
Railroading Books - Great Model Railroads 2004
...Up HO-scale. 40 My Life Before Girls HO-scale. 52 Four-track 4x8 N-scale. 58...

gishlick
Magazine Articles By Author
...Henry Ellett - 1 articles Herb Gishlick - 2 articles Herb King...

Magazine Articles By Herb Gishlick
My Library - Magazine Articles By Herb Gishlick My Library - Magazine Articles By Herb...

...My Library - Magazine Articles By Herb Gishlick 07/05/2014 Modeling...

Magazine Articles By Category: Layouts
...Page: 21 Author: Herb Gishlick Scale: HO Description: This freelance...

Magazine Articles By Category: Layouts - HO - Large
...Page: 72 Author: Herb Gishlick Scale: HO Description: In this...

Model Railroader 2006-08 Articles
...Page: 72 Author: Herb Gishlick Category: Layouts - HO -...

Scale Rails 2006-02 Articles
...Page: 21 Author: Herb Gishlick Category: Layouts Scale: HO...

Magazine Articles for HO Scale
...Page: 72 Author: Herb Gishlick Category: Layouts - HO -...

...Page: 21 Author: Herb Gishlick Category: Layouts Description: This...

give
Animation - Experimental Doors
...From a previous attempt I learned to give myself a little bit of space between...

DCC - S-CAB
...easy to select another engine and then give it a command. The throttle remembers the...

...lash-ups are not directly supported, unless you give each decoder the same address (and get...

DCC - Tsunami Decoder Programming
...is longer than your longest engine, and give it a couple of extra inches on...

Hand-laying Track - 1. Preparing and Installing Ties
...only for dust collection but also to give my hand that extra notification when it...

Hand-building Turnouts - Code 40 N-scale Turnout
...these jigs, the video tutorial online may give you enough ideas on how to build...

Hand-building Turnouts - Code 83 S-scale Turnout
...the throwbar with Floquil "Rail Brown" to give them that aged look. I paint any...

Painting - Paint Caddy
...out of solid Oak. The mitered corners give it a clean, professional look. Each Paint...

N-scale Equipment - Kato 2-8-2 - DCC Conversion
...that comes with the locomotive. It doesn't give any information about how to take this...

N-scale Equipment - Kato E8 - Disassembly
...which side doesn't want to budge should give you an idea which toothpick is the...

Scenery - Abutments Casts
...to remove with a sharp blade. To give you an idea of how amazingly accurate...

Scenery - Conifer Trees
...in a minute. First, we need to give those main branches (the fiber strands) some...

Scenery - Foreground Trees
...reaching into the layout. The tree will give and move back, without breaking. The model...

Scenery - Generic Background Trees
...shape and trim the armature branches to give the tree its overall shape. Once the...

...trim some of the branches down to give the tree its overall fullness. The trimmed...

...glued back into the main trunk to give the tree some additional, smaller branches. I...

...and form another small armature, just to give the tree more "body". If you look...

Scenery - Scenery Base
...as insert small rocks and debris to give the illusion that they are embedded in...

Scenery - Scenic Barrier
...would do. The top gets trimmed to give the illusion of mountain top or hill...

...scenic barrier a nice green color will give the illusion of wooded hills. Installation is...

Scenery - Stranded Wire Trees
...of Woodland Scenic fine ground foam to give this tree a light, airy feel. When...

Trackwork - Laying Flextrack
...will generally slide in pretty easily. To give them this head start, I came up...

Trackwork - Roadbed
...that time it is dry (I usually give it about 30 minutes). It does indeed...

...some time testing your actual set-up and give it time to cure to see if...

Woodworking - Foldable Workbench
...front edge of the top board to give the front of the workbench a sturdier...

Equipment - PRR FA-2/FB-2 Cab Units - S-CAB
...sells these for $1.95, so that should give you some idea of the quality of...

Equipment - PRR FM Flat Car - Construction: Stake Pockets
...and divide that distance by 7 to give me the equal distance between the middle...

Equipment - PRR FM Flat Car - Construction: Exterior Details
...and, using another pair of pliers, I give the upper section a 90-degree twist. It...

Equipment - PRR H21a Hopper - Construction: Frame
...lead shot into the center sill to give the car some weight. Lead shot can...

...bit slightly bigger than the wire to give myself some wiggling room. After inserting the...

Equipment - PRR H21a Hopper - Construction: Wheels and Couplers
...At this point, I couldn't wait to give the car a test run on the...

Equipment - PRR H21a Hopper - Construction: Bay Doors
...up correctly. Maybe the prototype drawings will give me a clue (once I receive those)....

Equipment - B&O M53 Box Car - Construction: Painting
...break off. The rubber ones provide some give. With that decided, I now needed a...

Equipment - PRR N5c Cabin Car - Construction: Underbody
...information for that anyway), but just to give the impression that there is a bunch...

Equipment - PRR RS-1 Road Switcher - Construction: Completion
...and carefully cut out the styrene to give me a matching opening. Note that since...

Equipment - PRR RS-1 Road Switcher - S-CAB
...bottom view of the modified frame. To give myself a fresh start, I decided to...

Equipment - PRR RS-1 Road Switcher - Construction: Impressions
...useless for kit construction, but it does give some color to the plain box. Inside...

Equipment - PRR X37 Box Car - Construction
...parts have holes and other indents to give you a hint as to what goes...

...running ability, the detail will have to give. The photo below is of the car...

Equipment - PRR X37 Box Car - Construction: Painting
...I used a light gray powder to give the raised roof panels a sun-faded look...

Crystal Creek Module - Progress Report - 2005-02 Report
...the next photo. Next, I decided to give the module some color by covering the...

Crystal Creek Module - Progress Report - 2005-08 Report
...ends at a nice 45-degree angle to give a finished look to the module. Next...

P & C Railroad Version 2 - Introduction
...decent-size trains running. I also wanted to give the illusion of a double-track main line,...

P & C Railroad Version 4 - Progress Report - 2004-01 Report
...this wall. I included this photo to give you an idea of how much vertical...

The PRR Chartiers Branch - Progress Report - 2009-12 Report
...they don't seem to be inclined to give us that much desired feature. So, I...

The PRR Chartiers Branch - Progress Report - 2010-08 Report
...convincing (the residue eventually disappeared, though). To give the creek a lived-in look, I decided...

The PRR Chartiers Branch - Progress Report - 2010-09 Report
...stipples at the top of the mountain give the illusion that the mountain curves over...

...those need to be very small to give the illusion of distance. The next photo...

The PRR Chartiers Branch - Progress Report - 2011-02 Report
...were hewn with a rough rasp to give them the bark texture. I then stained...

The PRR Chartiers Branch - Progress Report - 2012-08 Report
...The next day I came back and give it this ugly ground color (oh, well,......

The PRR Chartiers Branch - Progress Report - 2012-11 Report
...it and sprinkled N-scale PRR ballast to give the illusion of a packed-gravel lot. I...

The PRR Chartiers Branch - Progress Report - 2014-02 Report
...Worked great! I used several colors to give the road a more worn look. The...

Magazine Articles By Bob Walker
...Using various tools to distress wood to give structures that aged and weather-beaten look. Doors...

Magazine Articles By Dave Jacobs
... Scenery Description: You can give your layout extra dimension by taking scenery...

Magazine Articles By Jeff Madden
... Various rough sketches are provided to give ideas on general track designs one could...

Magazine Articles By Lee Vande Visse
...a drop shadow on stenciled signs to give buildings a vintage look. Weathering Steel Mill...

Magazine Articles By Michael Tylick
...styrene, and other assorted materials to quickly give the illusion the interiors of stores and...

Magazine Articles By Rich Weyand
...the layout owner built a closet to give the illusion of a great distance travelled...

Magazine Articles By Russell M. Griffin
...details how he built the walls to give them strength, while still maintaining the board-by-board...

Magazine Articles By Category: Layout Construction
...the layout owner built a closet to give the illusion of a great distance travelled...

Magazine Articles By Category: Layout Design
... Various rough sketches are provided to give ideas on general track designs one could...

Magazine Articles By Category: Scenery
... Dave Jacobs Description: You can give your layout extra dimension by taking scenery...

Magazine Articles By Category: Scratchbuilding
...Using various tools to distress wood to give structures that aged and weather-beaten look. Doors...

Magazine Articles By Category: Structures
...a drop shadow on stenciled signs to give buildings a vintage look. Plans from Pictures...

Magazine Articles By Category: Structures - Engine Servicing
...details how he built the walls to give them strength, while still maintaining the board-by-board...

Magazine Articles By Category: Structures - Homes
...styrene, and other assorted materials to quickly give the illusion the interiors of stores and...

Model Railroader 1997-07 Articles
...a drop shadow on stenciled signs to give buildings a vintage look. The EasyDCC Command...

Model Railroader 2006-08 Articles
...styrene, and other assorted materials to quickly give the illusion the interiors of stores and...

...the layout owner built a closet to give the illusion of a great distance travelled...

NASG Dispatch 2005-06 Articles
... Various rough sketches are provided to give ideas on general track designs one could...

Railroad Model Craftsman 1980-07 Articles
...details how he built the walls to give them strength, while still maintaining the board-by-board...

Railroad Model Craftsman 2011-03 Articles
...Using various tools to distress wood to give structures that aged and weather-beaten look. Kitbashing...

Scale Rails 2005-05 Articles
... Scenery Description: You can give your layout extra dimension by taking scenery...

Magazine Articles for HO Scale
...details how he built the walls to give them strength, while still maintaining the board-by-board...

Magazine Articles for N Scale
...the layout owner built a closet to give the illusion of a great distance travelled...

Magazine Articles for O Scale
...styrene, and other assorted materials to quickly give the illusion the interiors of stores and...

Magazine Articles for S Scale
... Various rough sketches are provided to give ideas on general track designs one could...

My Library - Photo Albums - PRR N5c Cabin Car
...my shots in...) Does the grab iron give us a clue as to its painted...

My Library - Photo Albums - Southern Forest Heritage Museum
...approval for a $100,000 grant which will give them the ability to restore this building...

Railroading Videos - Great Model Railroads Vol 39
...see enough of the earlier towns to give you a feel for them, but the...

About pmrr.org
...try that diet. I was going to give it one month and see where I...

...form of eating, I had to gradually "give up" things that I had become accustomed...

About S-scale
...including small switcher engines. While O-scale would give you even more space, due to their...

Canonsburg Milling
...side later on. The idea is the give the impression that the structure's walls are...

...of styrene across the middle section to give it some more support. I then glued...

...hardly noticeable. Together, those two applications just give the walls a very subtle, weathered look....

Deck Plate Girder Bridge - Removable Deck Plate Girder Bridge
...seal the wood. The flat black will give the illusion that the bridge is hollow...

Furniture Factory - Diorama
...the vehicles. I wanted to try to give the barren center section of the diorama...

O'Brien Steel Construction Co. - Detailing
...bit easier to handle, as well as give it some weight (so that it isn't...

Plate Girder Bridge
...hold them to apply glue and to give them time to dry. I did all...

Structures - Post Office
...and I added an internal light to give the building some life. The last photo...

Raiser Sharp Barber Shop
...building was painted with Aged Concrete to give it a more older, unmaintained look. I...

Smitty's Rod-n-Reel
...and yellow colors (all Floquil paints), to give the building an aged, almost moldy look...

given
Chartiers Branch - Canonsburg Passenger Station
...Carmichael in September 2010, and he has given me permission to use his photos on...

Equipment - PRR FM Flat Car - Construction: Painting
..."used", although it is hard to see given the dark confines of the wheels under...

Equipment - PRR H21a Hopper - Construction: Frame
...with the set, and their approximate locations given the magazine article mentioned above, I glued...

Equipment - PRR H21a Hopper - Construction: Completion
...prototype photo and tried to follow it given what was in the decal set. After...

The PRR Chartiers Branch - Progress Report - 2009-12 Report
...took me the rest of the time (given all the Christmas activities) to finalize the...

The PRR Chartiers Branch - Progress Report - 2013-04 Report
...the best I can do with the given space. The future plan is to make...

The PRR Chartiers Branch - Progress Report - 2014-06 Report
...much for me to do right now. Given what amount of time I have to...

The PRR Chartiers Branch - Progress Report - 2008-10 Report
...MDF blocks to represent 40-foot freight cars given the dimensions of an S-scale boxcar. Using...

Railroading Books - Steam Locomotives Cyclopedia Volume 1
...Types and Names Discusses the common names given to certain locomotive wheel configurations. 27...

Railroading Books - Track Planning for Realistic Operation
...it yields the most satisfying result possible, given what you want and what you can...

Magazine Articles By Jim Providenza
...project. The WP covered hopper roster is given, as well as a parts list. Includes...

Magazine Articles By John Ostler
...make to fit a layout in our given space. Keeping HOn3 Springs Intact Magazine:...

Magazine Articles By Tim Anderson
...and paints the unit. Full details are given on how to work with the extremely...

Magazine Articles By Category: Freight Cars - Hoppers
...project. The WP covered hopper roster is given, as well as a parts list. Includes...

Magazine Articles By Category: Model Railroad Philosophy
...make to fit a layout in our given space. My Two Cents Worth Magazine:...

Magazine Articles By Category: Scenery - Lights
...and paints the unit. Full details are given on how to work with the extremely...

N-Scale 2005-11/12 Articles
...and paints the unit. Full details are given on how to work with the extremely...

Railroad Model Craftsman 2002-12 Articles
...make to fit a layout in our given space. Santa Cruz Portland Cement Part II...

Railroad Model Craftsman 2006-12 Articles
...project. The WP covered hopper roster is given, as well as a parts list. Includes...

Magazine Articles for HO Scale
...project. The WP covered hopper roster is given, as well as a parts list. Includes...

Magazine Articles for N Scale
...and paints the unit. Full details are given on how to work with the extremely...

My Library - Photo Albums - PRR X26c Box Car
...the other one, however, this car was given a legitimate road number (even though its...

About pmrr.org
...back then. In my teens I was given an N-scale Fleischmann train set. My bedroom...

Canonsburg Milling
...a bit difficult to adequately photograph this given my layout lighting restrictions. The roof "ballast"...

Canonsburg Passenger Station - Planning
...brick-plus-one-edge-of-mortar being 9-1/8" wide, and 3-1/4" tall. Given that, and the prototype photos provided by...

...e-mailed them to me. He subsequently has given me permission to use his photos on...

Trestle Extension
...measured the required height of the abutment given the structure's location on my layout. It...

givens
Future Layout
...What is this section all about? Givens 11/29/2012 Things that are...

Future Layout - Givens
Peter's Model Railroading - Future Layout - Givens Future Layout - Givens There are some...

...Future Layout - Givens Future Layout - Givens There are some things I am fairly...

Sitemap by Page Titles
... November 29, 2012 - Givens November 29, 2012 -...

Sitemap by Last-modified Date
...Future Layout - Future Layout - Givens - Future Layout - Introduction November...

gives
Hand-laying Track - 2. Preparing and Applying Ballast
...darker ballast onto the light ballast. It gives the whole thing less sharp of a...

Hand-laying Track - 3. Aging the Ties
...right away and wipe it off. That gives a nice effect also. Don't wait too...

Hand-laying Track - 5. Laying Rail
...the feeder wire I am using. This gives me a little bit of wiggle room...

...like that. I have found that that gives me the straightest rail. Due to the...

Hand-building Turnouts - Code 83 S-scale Turnout
...rail mimicking the divergent point rail. That gives me an idea of how much material...

Chartiers Branch - Introduction
...built himself a trading post. This map gives you kind of an idea of the...

N-scale Equipment - Kato 2-8-2 - DCC Conversion
...the left side of the locomotive. It gives you an idea of how to route...

Scenery - Conifer Trees
...cover all of the top branches. It gives the tree a more three-dimensional appearance; as...

Scenery - Foreground Trees
...amounts on the main trunk, because that gives the tree its massive look. One of...

Scenery - Generic Background Trees
...the branches that they cling to. This gives the illusion of skinnier branches. I then...

...second coating of the rope pieces. This gives the tree even more body and some...

Scenery - Telegraph/Telephone Poles
...he scratchbuilt the poles. More importantly, he gives you all the key information about dimensions,...

Tortoise Installation Ideas - Sideways Installation
...linkage rod attached to the Tortoise. This gives it the freedom to move around while...

Custom Track Solutions - Helix
...of one level of the helix. It gives the overall dimensions of the sub-roadbed (luan...

Equipment - PRR H21a Hopper - Construction: Exterior
...of the top chords installed. It sure gives the car a nice finished look at...

Equipment - PRR N5c Cabin Car - Construction: Completion
...big advantage of ScaleCoat is that it gives you a glossy surface, so you can...

Equipment - PRR N5c Cabin Car - Construction: Interior Lights
...doesn't completely cover the parts, but that gives the lamps a more weathered/worn look, as...

Equipment - PRR NW2 Switcher - Sergent Couplers
...a strip of 2x6 of styrene. This gives it that lip at the top that...

Equipment - PRR X37 Box Car - Construction
...lead shot and lots of superglue! This gives the car some low-center-of-gravity weight. It's not...

...have been a better alternative since that gives you some working time to get them...

Bear Creek & Eastern - Progress Report - 2007-06 Report
...the panel snapped into place. It immediately gives it a finished look. Note also that...

Crystal Creek Module - Progress Report - 2005-02 Report
...of ground foam by Woodland Scenics. It gives it a more completed look even though...

P & C Railroad Version 3 - Progress Report - 2002-12 Report
...the final (scratchbuild) tunnel portals, but it gives you a bit of an idea of...

P & C Railroad Version 4 - Progress Report - 2003-04 Report
...to protect the surface. I think this gives the room a very nice, warm feeling....

P & C Railroad Version 4 - Progress Report - 2003-07 Report
...valance meets the wall as well. It gives the room a very professional appearance. Here's...

The PRR Chartiers Branch - Progress Report - 2010-09 Report
...sienna is visible through the trees. It gives the mountain a layered effect. The smaller...

The PRR Chartiers Branch - Progress Report - 2011-03 Report
...into the view of the camera). It gives the impression of a "finished" layout, although...

The PRR Chartiers Branch - Progress Report - 2012-11 Report
...didn't come out looking right. The author gives you an estimate on how long each...

Railroading Books - Great Model Railroads 1995
...the action takes place. Mostly hidden track gives the illusion of trains going off to...

Magazine Articles By Art Curren
...such, but it deserves attention. This article gives lots of tips and techniques about detailing,...

Magazine Articles By Bob Walker
... Painting & Weathering Description: Bob gives us his tips and tricks for layout...

Magazine Articles By David Dewey
...Locomotives - Other Description: The author gives a top-ten reasons why you're having trouble...

Magazine Articles By Jack Burgess
...Scale: HO Description: The author gives the history and describes how he built...

Magazine Articles By Roy Hoffman
...Scale: S Description: The author gives some tips on what he did to...

Magazine Articles By Wayne Lawson
...Scale: N Description: The article gives a heads-up of the various clubs involved...

Magazine Articles By Category: Locomotives - Other
... David Dewey Description: The author gives a top-ten reasons why you're having trouble...

Magazine Articles By Category: Modules
...Scale: N Description: The article gives a heads-up of the various clubs involved...

Magazine Articles By Category: Painting & Weathering
... Bob Walker Description: Bob gives us his tips and tricks for layout...

Magazine Articles By Category: Structures
...such, but it deserves attention. This article gives lots of tips and techniques about detailing,...

Magazine Articles By Category: Structures - Homes
...Scale: HO Description: The author gives the history and describes how he built...

Magazine Articles By Category: Structures - Industrial
...Scale: S Description: The author gives some tips on what he did to...

Model Railroader 1994-12 Articles
...such, but it deserves attention. This article gives lots of tips and techniques about detailing,...

N-Scale 2005-07/08 Articles
...Scale: N Description: The article gives a heads-up of the various clubs involved...

NASG Dispatch 2004-12 Articles
...Locomotives - Other Description: The author gives a top-ten reasons why you're having trouble...

NASG Dispatch 2009-02 Articles
...Scale: S Description: The author gives some tips on what he did to...

Railroad Model Craftsman 2009-01 Articles
...Scale: HO Description: The author gives the history and describes how he built...

Railroad Model Craftsman 2014-05 Articles
... Painting & Weathering Description: Bob gives us his tips and tricks for layout...

Magazine Articles for HO Scale
...Structures - Homes Description: The author gives the history and describes how he built...

...such, but it deserves attention. This article gives lots of tips and techniques about detailing,...

Magazine Articles for N Scale
... Modules Description: The article gives a heads-up of the various clubs involved...

Magazine Articles for S Scale
...Structures - Industrial Description: The author gives some tips on what he did to...

Canonsburg Passenger Station - Bay Window Construction
...several feet away from the model, it gives the same illusion of the prototype's profile....

Furniture Factory - Lumber Shed
...I "painted" the entire roof. The Dullcoat gives the paint something to stick to. The...

giving
DCC - S-CAB
...they have only converted engines that were giving them trouble before, such as slow-moving switchers...

Scenery - Foreground Trees
...sticks to the hair, which winds up giving it the airy feeling that I had...

Tools - Circle Cutting Jig
...a hole through the hardboard, and thereby giving me the exact location from where to...

Equipment - PRR FM Flat Car - Construction: Stake Pockets
...the other strip in like manner, again giving it lots of drying time. I set...

Bear Creek & Eastern - Progress Report - 2007-01 Report
... I've also been giving the foreground some thought. I built this...

Bear Creek & Eastern - Progress Report - 2008-01 Report
...section. Also, the center section's track was giving me problems. So, one day I got...

Railroading Books - Scenery Tips and Techniques
...the desert. 7 82 Buildings Giving depth to printed background structures. Modeling with...

Magazine Articles By Paul Scoles
...he does scenery work. He has been giving clinics at shows for 30 years. In...

Magazine Articles By Category: Scenery
...he does scenery work. He has been giving clinics at shows for 30 years. In...

Railroad Model Craftsman 2009-11 Articles
...he does scenery work. He has been giving clinics at shows for 30 years. In...

gl
Equipment - PRR GLd Hopper - Prototype Information
... 11/30/2012 The class GL, subclass "d", is kind of an odd...

Railroading Books - Pennsylvania Railroad Steel Open Hopper Cars
...Title / Description 1 14 GL Hoppers Covers the GL, GLc, GLca, GLcb,...

... 14 GL Hoppers Covers the GL, GLc, GLca, GLcb, and GLh class and...

Magazine Articles By Jim Hunter
...- Hoppers Description: History of the GL, GLa, GLb, GLc, and GLca hoppers, and...

Magazine Articles By Category: Freight Cars - Hoppers
...Jim Hunter Description: History of the GL, GLa, GLb, GLc, and GLca hoppers, and...

The Keystone Modeler 73 Spring 2010 Articles
...- Hoppers Description: History of the GL, GLa, GLb, GLc, and GLca hoppers, and...

gla
Chartiers Branch - General Information
...coal cars, such as H21a hoppers and GLa gondolas (not only for coal, but also...

Equipment - PRR GLa Hopper
Peter's Model Railroading - Equipment - PRR GLa Hopper PRR GLa Hopper Prototype Information...

...- Equipment - PRR GLa Hopper PRR GLa Hopper Prototype Information 03/26/2014...

Equipment - PRR GLa Hopper - Prototype Information
Peter's Model Railroading - Equipment - PRR GLa Hopper - Prototype Information PRR GLa Hopper...

...PRR GLa Hopper - Prototype Information PRR GLa Hopper - Prototype Information...

...Railfan.net The GLa class of twin-bay hoppers were built from...

Equipment - PRR GLa Hopper - References
Peter's Model Railroading - Equipment - PRR GLa Hopper - References PRR GLa Hopper -...

...- PRR GLa Hopper - References PRR GLa Hopper - References...

...Modeler - 73 Spring 2010 "PRR GLA and GLCA Hopper Cars Part 1", pg...

...Keystone Modeler - 76 Spring 2011 "PRR GLA and GLCA Hopper Cars Part 2", pg...

Equipment - PRR GLa Hopper - Model Information
Peter's Model Railroading - Equipment - PRR GLa Hopper - Model Information PRR GLa Hopper...

...PRR GLa Hopper - Model Information PRR GLa Hopper - Model Information...

...Due to the cheer quantity of the GLa hoppers owned by the PRR, they need...

...three of these cars. Note that the GLa is basically a smaller version of the...

...I hope that the construction of these GLa hoppers will prepare me for building a...

Equipment - PRR GLa Hopper - Construction: Frame
Peter's Model Railroading - Equipment - PRR GLa Hopper - Construction: Frame PRR GLa Hopper...

...PRR GLa Hopper - Construction: Frame PRR GLa Hopper - Construction: Frame...

Equipment
...Gondola July 14, 2010 PRR GLa Hopper March 30, 2014 PRR...

Railroading Books - Pennsylvania Railroad Steel Open Hopper Cars
...cars were built. 2 24 GLa Hoppers Covers the GLa and GLg subclasses....

... 24 GLa Hoppers Covers the GLa and GLg subclasses. More than 30,000 of...

...GLd subclass. 16 144 One-car GLa Conversion This covers the GLf subclass car....

... Footnote Classes Covers the GM, GV, GLa Odd, and Hcl classes and subclasses.

Magazine Articles By Jim Hunter
... 07/05/2014 PRR GLA and GLCA Hopper Cars Part 1 Magazine:...

...Hoppers Description: History of the GL, GLa, GLb, GLc, and GLca hoppers, and includes...

Magazine Articles By Category: Freight Cars - Hoppers
...H34 and H40 covered hopper classes. PRR GLA and GLCA Hopper Cars Part 1 Magazine:...

...Hunter Description: History of the GL, GLa, GLb, GLc, and GLca hoppers, and includes...

The Keystone Modeler 73 Spring 2010 Articles
...parts, construction highlights, and DCC wiring. PRR GLA and GLCA Hopper Cars Part 1 Page:...

...Hoppers Description: History of the GL, GLa, GLb, GLc, and GLca hoppers, and includes...

Sitemap by Page Titles
...References July 12, 2010 PRR GLa Hopper March 30, 2014 -...

Sitemap by Last-modified Date
...pmrr.org March 30, 2014 - PRR GLa Hopper - PRR GLa Hopper -...

... PRR GLa Hopper - PRR GLa Hopper - Construction: Frame March 26, 2014...

...Frame March 26, 2014 - PRR GLa Hopper - Prototype Information - PRR...

...Hopper - Prototype Information - PRR GLa Hopper - References March 25, 2014 -...

...References March 25, 2014 - PRR GLa Hopper - Model Information March 24, 2014...

glaab
Magazine Articles By Author
...John Gerdes - 8 articles John Glaab - 3 articles John Grams...

Magazine Articles By John Glaab
My Library - Magazine Articles By John Glaab My Library - Magazine Articles By John...

...My Library - Magazine Articles By John Glaab 07/05/2014 A...

Magazine Articles By Category: Model Railroad Retailers
...Page: 86 Author: John Glaab Description: The annual toy fair has...

Magazine Articles By Category: Model Railroad Shows
...Page: 68 Author: John Glaab Description: The author reports on what...

Magazine Articles By Category: Structures
...Page: 73 Author: John Glaab Scale: HO Description: The author...

Railroad Model Craftsman 2002-12 Articles
...Page: 73 Author: John Glaab Category: Structures Scale: HO...

Railroad Model Craftsman 2003-05 Articles
...Page: 86 Author: John Glaab Category: Model Railroad Retailers Description:...

Railroad Model Craftsman 2010-05 Articles
...Page: 68 Author: John Glaab Category: Model Railroad Shows Description:...

Magazine Articles for HO Scale
...Page: 73 Author: John Glaab Category: Structures Description: The...

glacier
Magazine Articles By Mike Pearsall
...Pearsall 07/05/2014 Glacier Park Mike Magazine: Model Railroader...

Magazine Articles By Category: Locomotives - Steam
...see at this web site: http://www.angelfire.com/film/prrpics/B6.html Glacier Park Mike Magazine: Model Railroader...

Model Railroader 1984-12 Articles
...a prototype photo of the CP #45. Glacier Park Mike Page: 162 Author:...

glad
LED Lighting
..."natural white" ones (4000K) and I am glad I did, because I like their color....

Hand-laying Track - 6. Track Details
...on my N-scale layout and I was glad to find that Tomar makes them in...

The Hobby - Changing Modeling Scales
...transition has been smooth. I am very glad I made the decision to switch. I...

...building the new layout, and I am glad I can read the road numbers on...

Equipment - PRR FM Flat Car - Construction: Exterior Details
...by holding them at an angle (the glad hand and hose usually lean at an...

...in some places; in retrospect, I am glad I didn't install them, because the poling...

Equipment - PRR H21a Hopper - Construction: Frame
...plan on inserting air brake valves (with glad hands) into the hole in the end...

Equipment - B&O M53 Box Car - Construction: Adding Details
...a lot of tedious work, and I'm glad it is done. I wound up not...

Equipment - PRR RS-1 Road Switcher - Construction: Conclusion
...engine, I am very happy. I am glad I scratch-built the parts of the kit...

gladden
Chartiers Branch - Track
...(left to right); elev. 890ft Gladden, PA 4.3 355'3" station;...

gladhands
Equipment - PRR FM Flat Car - Construction: Painting
...Grimy Black, and then I painted the gladhands using Poly Scale Stainless Steel.

gladstone
Magazine Articles By Doug Geiger
... Model construction, and prototype photos. The Gladstone & North Houghton Magazine: Model...

Magazine Articles By Jeff Johnston
...rods, and universal shafts Visiting Fred Carlson's Gladstone & North Houghton Magazine: Railroad...

Magazine Articles By Category: Layouts - HO - Large
...The layout measures 27' x 12'. The Gladstone & North Houghton Magazine: Model...

...layout accompany the article. Visiting Fred Carlson's Gladstone & North Houghton Magazine: Railroad...

Model Railroading 2000-11/12 Articles
...parts lists for superdetailing the models. The Gladstone & North Houghton Page: 38 Author:...

Railroad Model Craftsman 1996-02 Articles
...to build this model. Visiting Fred Carlson's Gladstone & North Houghton Page: 60 Author:...

Magazine Articles for HO Scale
...The layout measures 27' x 12'. The Gladstone & North Houghton Magazine: Model...

...photos accompanying the article. Visiting Fred Carlson's Gladstone & North Houghton Magazine: Railroad...

glance
Storage - Strip Storage
...However, I can now see, at a glance, what I have in my inventory, and...

Equipment - PRR X29 Box Car - Kit Construction
...placed these weights on it. A side-profile glance helped me to verify that the walkway...

Railroading Books - Great Model Railroads 1992
... 78 The Hobby at a Glance Author: Jim Kelly. This article covers the...

Magazine Articles By Ron LaFever
... 07/05/2014 Scale Miles-per-hour At a Glance Magazine: Railroad Model Craftsman 2003-09...

Magazine Articles By Category: Model Railroad Terminology
...about model railroading. Scale Miles-per-hour At a Glance Magazine: Railroad Model Craftsman 2003-09...

Railroad Model Craftsman 2003-09 Articles
...are also included. Scale Miles-per-hour At a Glance Page: 81 Author: Ron...

glaring
About pmrr.org
...topic I cover and you see a glaring error, please let me know, so that...

glass
S-scale Vehicles - 1950 Oldsmobile 88
...headlights of the model have clear plastic "glass", so it is a simple matter of...

...matter of gluing an LED behind the glass. Of course, "simple" is understating it, because...

Hand-laying Track - 2. Preparing and Applying Ballast
...the mixture out on a piece of glass and let it dry overnight. I do...

...actually make the ballast stick to the glass as well, but it can be easily...

...can be easily scraped off and the glass can be washed with hot water and...

...I try to remove it from the glass. I break up the ballast while working...

...the ballast while working it on the glass surface. If there are parts that are...

Hand-building Turnouts - Code 40 N-scale Turnout
...do my work on a piece of glass to get a super-smooth surface. I don't...

Chartiers Branch - General Information
...along the line, which included steel plants, glass plants, brick works, lumber mills, chemical companies,...

Chartiers Branch - Track
... 272'3" General Electric Co.; Bridgeville Glass Works; has P.C.&Y. Railway connection...

...22.2 1832' Duncan & Miller Glass Company 22.2 1832'...

... 22.8 1881'6" Mississippi Glass Co. 23.0 1898'6"...

... 23.3 1922'3" Hazel-Atlas Glass Co. No. 1 Plant 23.5...

... 23.6 1947' Hazel-Atlas Glass Co. No. 2 Plant...

Chartiers Branch - Washington
...Source The glass industry alone employed 40,000 people in the...

General Rolling Stock - Coal Load
...did the work on a piece of glass, so that I could recover all the...

N-scale Equipment - Kato E8 - Disassembly
...between the outer body shell and the glass insert. This can be seen in the...

...With a little bit of effort the glass insert can be snapped back into its...

Equipment - PRR FM Flat Car - Construction: Stake Pockets
...such that the metal base and the glass surface I work on are at a...

Equipment - PRR FM Flat Car - Construction: Decking
...the masking tape to the sheet of glass I use as my construction surface, and...

Equipment - PRR GLa Hopper - Construction: Frame
...am building them on a piece of glass, hence the layout being reflected in the...

...angle, and the flat surface of the glass ensures that they are both on the...

Equipment - PRR N5c Cabin Car - Construction: Completion
...a strip of masking tape on my glass work surface, and then ripped it up...

...is done, is to install the window glass. I am using some very thin clear...

...shows the completed model, with all the glass and the air hoses installed.

Equipment - PRR RS-1 Road Switcher - Construction: Completion
...protective material on both sides of the "glass". I cut it into a square piece...

...long Saturday night fitting, cutting, and installing glass into the cab. This is a tedious...

...sides of the styrene. This protects the "glass" from damage from handling. I only removed...

...them) had nice insets for installing the glass. For the crew, I found these two...

...and then glued them directly to the glass in the window, in the approximate position....

Equipment - PRR RS-1 Road Switcher - Construction: Body
...my work on a piece of 1/4"-thick glass to make sure everything is flat. This...

...fit. I did my construction on the glass piece so that the bottoms of the...

...three parts, right side up, on the glass plate and placed a couple of spots...

...set. I am doing this on the glass plate, because the tops of the pilots...

Equipment - PRR RS-1 Road Switcher - Construction: Adding Details
...the stanchion sideways on a piece of glass and used Testors' plastic cement to glue...

...the very bottom of the stanchion. The glass makes sure that the two parts are...

...parts are easy to remove from the glass surface. The shape of the handrail was...

Equipment - PRR X29 Box Car - Kit Construction
...flat surface. I use a piece of glass for that. And here they are, ready...

P & C Railroad Version 4 - Progress Report - 2003-04 Report
...turned the door upside-down so that the glass part is on the bottom and the...

...the bottom wouldn't last too long. The glass keeps them out of the room, yet...

The PRR Chartiers Branch - Progress Report - 2010-08 Report
...in the camera's flash, a piece of "glass" from an N-scale structure was used to...

...used to represent a piece of broken glass that somehow wound up near the bridge's...

...pieces were glued right next to the glass. The cutter created a realistic broken effect....

The PRR Chartiers Branch - Progress Report - 2013-04 Report
...method, I'll just use the sheet of glass I use for modeling purposes. However, the...

The PRR Chartiers Branch - Progress Report - 2014-02 Report
...the Canonsburg passenger station. I installed window glass, and started working on installing the window's...

...always intended to be glued to the glass. However, as I worked on the building...

Railroading Books - Great Model Railroads 1994
...Shippensburg. 92 Gently Through the Looking Glass Lee Vande Visse writes about stage lighting...

Railroading Books - Model Railroad Planning 2001
...7 48 Serving West Virginia's Glass Industry The author describes how he came...

...set in Morgantown, W. Va, modeling its glass industry. Includes a track plan and prototype...

Magazine Articles By Cody Grivno
...roof weathering, and how to simulate broken glass. Also included is a sidebar on how...

Magazine Articles By Thomas D. Dressler
...are several prototype photos. Realistic Model Window "Glass" Magazine: Model Railroader 1978-01 Page:...

... Using Micro Scale's Kristal-Klear to mimic glass in engines and structures. Russians and Yellow...

Magazine Articles By Trevor Marshall
...salt for the effect. The Advantages of Glass Magazine: Railroad Model Craftsman 2009-01...

...The article describes how to use microscope glass to model real glass in structures and...

...to use microscope glass to model real glass in structures and equipment. The Belknap Monument...

Magazine Articles By Category: Scratchbuilding
...back-of-the-layout type of structures. Realistic Model Window "Glass" Magazine: Model Railroader 1978-01 Page:...

... Using Micro Scale's Kristal-Klear to mimic glass in engines and structures. Scale Drawings Magazine:...

...guesstimate your next project. The Advantages of Glass Magazine: Railroad Model Craftsman 2009-01...

...The article describes how to use microscope glass to model real glass in structures and...

...to use microscope glass to model real glass in structures and equipment. Things to Do...

Magazine Articles By Category: Structures - Depots/Stations/Yards
...roof weathering, and how to simulate broken glass. Also included is a sidebar on how...

Model Railroader 1978-01 Articles
...Includes only model photos. Realistic Model Window "Glass" Page: 106 Author: Thomas...

... Using Micro Scale's Kristal-Klear to mimic glass in engines and structures. Milwaukee Road's Water...

Model Railroader 2010-04 Articles
...roof weathering, and how to simulate broken glass. Also included is a sidebar on how...

Railroad Model Craftsman 2009-01 Articles
...were made over time. The Advantages of Glass Page: 84 Author: Trevor...

...The article describes how to use microscope glass to model real glass in structures and...

...to use microscope glass to model real glass in structures and equipment. Kitbashing a Newsstand...

About pmrr.org
...e.g. "site:www.pmrr.org nw2", and press the magnifier glass icon/button. It will only show you pages...

...an office building. The layout was behind glass, and you would duck under the various...

...of books and magazines. They have smoked glass in the doors. I think I used...

...such as chocolate, chips, and drinking a glass of wine every night. People often tell...

Background Building #1
...put all three pieces down on my glass work surface and used double-sided tape to...

Canonsburg Milling
...I put them on a piece of glass and then put some weights on them,...

...sure they made good contact with the glass. I then mixed and poured Plaster of...

...Steel". Not shown, I have installed the "glass" of the windows and doors of the...

Canonsburg Passenger Station - Planning
...sheets that are in the windows were glass originally, of course. A photo taken in...

...area above the door used to be glass. The entire space taken up by the...

...to be two wooden doors, which had glass in the upper half of the door....

Furniture Factory - Main Factory Building
...remaining shininess. For the window and door glass I decided to use Clover House's 0.010-inch...

Furniture Factory - Lumber Shed
...set-up. I build on a piece of glass. It guarantees that I have a flat,...

...which to work. Under this piece of glass I placed a photo of the structure...

...the structure that I am "copying". The glass keeps the photo in good condition, yet...

O'Brien Steel Construction Co. - Construction
...did the assembly on a piece of glass to make sure the parts remained level...

...break the whole thing lose from the glass (glue oozes out a bit). This is...

...window panes is probably for attaching the "glass". However, when I did a dry-run for...

O'Brien Steel Construction Co. - Detailing
...to the structure. Next up are the "glass" inserts. The kit was short two window's...

Plate Girder Bridge
...all this work on a sheet of glass, and I used weights to hold the...

Raiser Sharp Barber Shop
...set up on a smooth piece of glass. I then used a piece of blue...

Structures - Residence
...window and door openings. Next, Ria installed glass (clear styrene) supplemented by Krystal Clear to...

...supplemented by Krystal Clear to simulate real glass. After the window frames were fitted and...

Smitty's Rod-n-Reel
...bars, and then installed clear styrene for glass. Next up is the front porch. I...

Scratch-built Turntable - Bridge Detailing
...back of the walls to represent the glass (shown in this photo). After installing a...

Structures - White Water Brewery
...installed clear plastic to act as window glass. The curtains/blinds were made from pieces of...

glass-jar
Magazine Articles By Montford Switzer
...build an outside-braced model of this well-known glass-jar logo boxcar. Includes many prototype photos, boxcar...

Magazine Articles By Category: Freight Cars - Boxcars
...build an outside-braced model of this well-known glass-jar logo boxcar. Includes many prototype photos, boxcar...

Railroad Model Craftsman 2010-08 Articles
...build an outside-braced model of this well-known glass-jar logo boxcar. Includes many prototype photos, boxcar...

Magazine Articles for HO Scale
...build an outside-braced model of this well-known glass-jar logo boxcar. Includes many prototype photos, boxcar...

glasses
N-scale Equipment - Arnold S2 - Motor Conversion
...grip, two small screwdrivers, and optional magnifying glasses. The vise grip is needed to hold...

Bascule Bridge
...was definitely work that required the magnifying glasses and a steady hand. Here they are...

glaze
Canonsburg Steel & Iron Works
...styrene behind the window panes using Crystal Glaze, and cut a piece of black paper...

Furniture Factory - Main Factory Building
...it in place with Krylon's "Crystal Clear Glaze". As you can see in the photo,...

...plastic. If some of the Crystal Clear Glaze oozes into a window frame, it dries...

Scratch-built Turntable - Bridge Detailing
...coated the windows with Krylon Crystal Clear Glaze. If you use it sparingly, the results...

glazing
Magazine Articles By Douglas Nelson
...irons, trainphone antennas, Z-scale couplers, better window glazing, and weathering them.

Magazine Articles By Category: Cabooses
...irons, trainphone antennas, Z-scale couplers, better window glazing, and weathering them. The Marker Lamps at...

N Scale Railroading 2003-11/12 Articles
...irons, trainphone antennas, Z-scale couplers, better window glazing, and weathering them.

Magazine Articles for N Scale
...irons, trainphone antennas, Z-scale couplers, better window glazing, and weathering them. Small Oil Facility Magazine:...

Canonsburg Passenger Station - Bay Window Construction
...be visible later on. I used Bondo "Glazing & Spot Putty" to do that. By...

glb
Railroading Books - Pennsylvania Railroad Steel Open Hopper Cars
... 133 Alternative Design Describes the GLb subclass. 15 140 USRA Hoppers...

Magazine Articles By Jim Hunter
...Description: History of the GL, GLa, GLb, GLc, and GLca hoppers, and includes many...

Magazine Articles By Category: Freight Cars - Hoppers
...Description: History of the GL, GLa, GLb, GLc, and GLca hoppers, and includes many...

The Keystone Modeler 73 Spring 2010 Articles
...Description: History of the GL, GLa, GLb, GLc, and GLca hoppers, and includes many...

glc
Railroading Books - Pennsylvania Railroad Steel Open Hopper Cars
...14 GL Hoppers Covers the GL, GLc, GLca, GLcb, and GLh class and subclasses....

Magazine Articles By Jim Hunter
... History of the GL, GLa, GLb, GLc, and GLca hoppers, and includes many prototype...

Magazine Articles By Category: Freight Cars - Hoppers
... History of the GL, GLa, GLb, GLc, and GLca hoppers, and includes many prototype...

The Keystone Modeler 73 Spring 2010 Articles
... History of the GL, GLa, GLb, GLc, and GLca hoppers, and includes many prototype...

glca
Equipment - PRR GLa Hopper - References
...73 Spring 2010 "PRR GLA and GLCA Hopper Cars Part 1", pg 17, covers...

...- 76 Spring 2011 "PRR GLA and GLCA Hopper Cars Part 2", pg 13 (note...

...Autumn 2012 issue only covers modeling the GLca). Railmodel Journal February 2002...

Railroading Books - Pennsylvania Railroad Steel Open Hopper Cars
... GL Hoppers Covers the GL, GLc, GLca, GLcb, and GLh class and subclasses. This...

Magazine Articles By Jim Hunter
... 07/05/2014 PRR GLA and GLCA Hopper Cars Part 1 Magazine:...

...of the GL, GLa, GLb, GLc, and GLca hoppers, and includes many prototype photos.

Magazine Articles By Category: Freight Cars - Hoppers
...H40 covered hopper classes. PRR GLA and GLCA Hopper Cars Part 1 Magazine:...

...of the GL, GLa, GLb, GLc, and GLca hoppers, and includes many prototype photos. Re-detailing...

The Keystone Modeler 73 Spring 2010 Articles
...highlights, and DCC wiring. PRR GLA and GLCA Hopper Cars Part 1 Page: 17...

...of the GL, GLa, GLb, GLc, and GLca hoppers, and includes many prototype photos. Modeling...

glcb
Railroading Books - Pennsylvania Railroad Steel Open Hopper Cars
...GL Hoppers Covers the GL, GLc, GLca, GLcb, and GLh class and subclasses. This chapter...

gld
Equipment - PRR GLd Hopper
Peter's Model Railroading - Equipment - PRR GLd Hopper PRR GLd Hopper Prototype Information...

...- Equipment - PRR GLd Hopper PRR GLd Hopper Prototype Information 11/30/2012...

Equipment - PRR GLd Hopper - Prototype Information
Peter's Model Railroading - Equipment - PRR GLd Hopper - Prototype Information PRR GLd Hopper...

...PRR GLd Hopper - Prototype Information PRR GLd Hopper - Prototype Information...

Equipment - PRR GLd Hopper - Model Information
Peter's Model Railroading - Equipment - PRR GLd Hopper - Model Information PRR GLd Hopper...

...PRR GLd Hopper - Model Information PRR GLd Hopper - Model Information...

Equipment - PRR GLd Hopper - Coupler Conversion
Peter's Model Railroading - Equipment - PRR GLd Hopper - Coupler Conversion PRR GLd Hopper...

...PRR GLd Hopper - Coupler Conversion PRR GLd Hopper - Coupler Conversion...

Equipment - PRR GLd Hopper - Photo Gallery
Peter's Model Railroading - Equipment - PRR GLd Hopper - Photo Gallery PRR GLd Hopper...

...PRR GLd Hopper - Photo Gallery PRR GLd Hopper - Photo Gallery...

Equipment - PRR GLd Hopper - References
Peter's Model Railroading - Equipment - PRR GLd Hopper - References PRR GLd Hopper -...

...- PRR GLd Hopper - References PRR GLd Hopper - References...

...Hopper Cars , page 140+. GLd class described. Side profile...

Equipment
...Hopper March 30, 2014 PRR GLd Hopper November 30, 2012 PRR...

Railroading Books - Pennsylvania Railroad Steel Open Hopper Cars
... 140 USRA Hoppers Covers the GLd subclass. 16 144 One-car GLa...

Sitemap by Page Titles
...References March 26, 2014 PRR GLd Hopper March 24, 2014 -...

Sitemap by Last-modified Date
...Information March 24, 2014 - PRR GLd Hopper - PRR X26 Box Car...

...Shed November 30, 2012 - PRR GLd Hopper - Prototype Information November 29, 2012...

...Report September 02, 2010 - PRR GLd Hopper - Photo Gallery August 26, 2010...

...Report April 28, 2010 - PRR GLd Hopper - Coupler Conversion - PRR...

...Hopper - Coupler Conversion - PRR GLd Hopper - Model Information - PRR...

...Car December 23, 2008 - PRR GLd Hopper - References November 28, 2008 -...

gle
Magazine Articles By John Teichmoeller
...article covers the following PRR covered hoppers: GLe, H21d, H30, H30a, H32, and H33. PRR...

...and photos of O-scale models of the GLe, H30, H32, and H33 classes. PRR Covered...

Magazine Articles By Category: Freight Cars - Hoppers
...article covers the following PRR covered hoppers: GLe, H21d, H30, H30a, H32, and H33. PRR...

...and photos of O-scale models of the GLe, H30, H32, and H33 classes. PRR Covered...

The Keystone Modeler 06 January 2004 Articles
...article covers the following PRR covered hoppers: GLe, H21d, H30, H30a, H32, and H33. You...

The Keystone Modeler 07 February 2004 Articles
...and photos of O-scale models of the GLe, H30, H32, and H33 classes. BLI Class...

gleaned
Trackwork - Roadbed
...At first I used a flat-head screwdriver (gleaned this technique from the Reid brothers as...

Railroading Books - Steam Locomotive Coaling Stations and Diesel Locomotive Fueling Facilities
...coaling and fueling facilities. Material is also gleaned from Fairbanks-Morse catalogs and ads of Ogle...

Structures - Outhouse
...the way, is not originally mine; I gleaned it from a friend here in town,...

glen
Magazine Articles By Albert E. Turner, Jr.
...A 33.5 by 13.5 foot layout by Glen Brazelton features high trestle bridges, large mountains,...

Magazine Articles By Category: Layouts
...A 33.5 by 13.5 foot layout by Glen Brazelton features high trestle bridges, large mountains,...

Railroad Model Craftsman 1977-08 Articles
...A 33.5 by 13.5 foot layout by Glen Brazelton features high trestle bridges, large mountains,...

Magazine Articles for HO Scale
...A 33.5 by 13.5 foot layout by Glen Brazelton features high trestle bridges, large mountains,...

glenn
Chartiers Branch - Track
...storage 1.0 83'6" Glenn passenger station (no siding) 1.0...

Magazine Articles By Author
...articles Gilbert Moreno - 1 articles Glenn Miller - 1 articles Gordon Andrews...

Magazine Articles By Glenn Miller
My Library - Magazine Articles By Glenn Miller My Library - Magazine Articles By...

...Miller My Library - Magazine Articles By Glenn Miller 07/05/2014...

Magazine Articles By Category: Museums
...2010-12 Page: 16 Author: Glenn Miller Scale: multi Description: The...

NASG Dispatch 2010-12 Articles
...Museum Page: 16 Author: Glenn Miller Category: Museums Scale:...

glf
Railroading Books - Pennsylvania Railroad Steel Open Hopper Cars
... One-car GLa Conversion This covers the GLf subclass car. 17 146 Five-bay...

glg
Railroading Books - Pennsylvania Railroad Steel Open Hopper Cars
... GLa Hoppers Covers the GLa and GLg subclasses. More than 30,000 of these cars...

glh
Railroading Books - Pennsylvania Railroad Steel Open Hopper Cars
...Covers the GL, GLc, GLca, GLcb, and GLh class and subclasses. This chapter has a...

glider
Tools - Panel Cutting Sled
...2-foot long oak was used as the glider that runs in the miter gauge slot...

...wide oak. This is to become the glider under the jig. With the oak glider...

...glider under the jig. With the oak glider cut and the fence securely glued to...

...bottom of the jig, I glued the glider strip to the bottom of the jig....

...the photo). I then further secured the glider strip with a couple of screws (again,...

gliebe
Magazine Articles By Author
...Philip Bonzon - 1 articles Philip Gliebe - 1 articles Philip H. Mott...

Magazine Articles By Philip Gliebe
My Library - Magazine Articles By Philip Gliebe My Library - Magazine Articles By Philip...

...My Library - Magazine Articles By Philip Gliebe 07/05/2014 Kitbashing...

Magazine Articles By Category: Locomotives - Diesel
...Page: 66 Author: Philip Gliebe Scale: HOn30 Description: Using an...

Railroad Model Craftsman 2011-03 Articles
...Page: 66 Author: Philip Gliebe Category: Locomotives - Diesel Scale:...

Magazine Articles for HOn30 Scale
...Page: 66 Author: Philip Gliebe Category: Locomotives - Diesel Description:...

glimpse
O'Brien Steel Construction Co. - Construction
...the various components together to get a glimpse of what the final structure will look...

glimpses
Railroading Books - Creating Micro Layouts
...the Backstage Layouts 5 25 Glimpses - Modeling Pieces of the Real World...

glitches
Magazine Articles By Jack Burgess
...Scale: HO Description: Despite some glitches, careful planning paid off in a highly...

Magazine Articles By Category: Layouts
...Scale: HO Description: Despite some glitches, careful planning paid off in a highly...

Model Railroader 2000-01 Articles
...Scale: HO Description: Despite some glitches, careful planning paid off in a highly...

Magazine Articles for HO Scale
... Layouts Description: Despite some glitches, careful planning paid off in a highly...

glitters
General Rolling Stock - Coal Load
...finer run from coal mines. The material glitters a bit, which adds to the effect,...

glob
Hand-building Turnouts - Code 40 N-scale Turnout
...point rail, or it leaves a large glob on the other side of the point...

O'Brien Steel Construction Co. - Detailing
...I didn't want to risk a big glob of glue on the walls. Note that...

globbed
Hand-laying Track - 2. Preparing and Applying Ballast
...If there are parts that are really globbed together, I throw those away. What I...

globs
Equipment - B&O M53 Box Car - Construction: Underbody
...surface. This got rid of any glue globs and made all the boards the same...

glockner
Magazine Articles By Author
...W. Davis - 1 articles Wolfgang Glockner - 1 articles

Magazine Articles By Wolfgang Glockner
My Library - Magazine Articles By Wolfgang Glockner My Library - Magazine Articles By Wolfgang...

...My Library - Magazine Articles By Wolfgang Glockner 07/05/2014 On...

Magazine Articles By Category: Modules
...Page: 20 Author: Wolfgang Glockner Scale: N Description: A 6'...

N-Scale 2003-01/02 Articles
...Page: 20 Author: Wolfgang Glockner Category: Modules Scale: N...

Magazine Articles for N Scale
...Page: 20 Author: Wolfgang Glockner Category: Modules Description: A...

glory
Chartiers Branch - Canonsburg Passenger Station
...print) that shows the station in its glory days. This photo was taken by Gary...

Railroading Books - Great Model Railroads 1992
...plan are included. 8 64 Glory Days of the Mississippi Author: Jim Kelly....

Magazine Articles By Mallory Hope Ferrell
... Photos of the Empire City Railway. Glory Days on the Rio Grande Southern Magazine:...

Magazine Articles By Category: Layouts - O
...Includes model photos, a rough track plan. Glory Days on the Rio Grande Southern Magazine:...

Railroad Model Craftsman 2010-05 Articles
...Articles 07/05/2014 Glory Days on the Rio Grande Southern Page:...

Magazine Articles for On3 Scale
...author describes how he did the conversion. Glory Days on the Rio Grande Southern Magazine:...

gloss
General Rolling Stock - Containers
...After the paint dried, I sprayed Testors' gloss cote to make it easier for the...

General Rolling Stock - Steel Beam Load
...shiny metal, so I spray-painted them with gloss metal spray-paint (in a can). This went...

Equipment - PRR H21a Hopper - Construction: Completion
...set. After spraying the car with Testor's Gloss Cote and letting that dry for a...

Equipment - B&O M53 Box Car - Construction: Painting
...details and hand-painted them, I spray-painted Testors "Gloss cote" to protect the paint finish and...

Equipment - PRR RS-1 Road Switcher - Construction: Painting
...model with the paint coat applied. No gloss or dull coat have been applied yet....

...to the model before I apply the gloss coat (which is in preparation for applying...

P & C Railroad Version 3 - Progress Report - 2001-08 Report
...river, so I applied a layer of gloss medium to the river bed. Before I...

...This was the first time I used gloss medium. What you see in the photo...

P & C Railroad Version 3 - Progress Report - 2001-09 Report
...what the river looks like when the gloss medium has dried. It turned out pretty...

P & C Railroad Version 3 - Progress Report - 2002-01 Report
...used a foam brush to apply Liquitex Gloss Medium. The next day the brush strokes...

...back up it leaves sharp peaks of gloss medium material, but as it dries it...

...some light blue paint in with the gloss medium. The next day I looked at...

...and was shocked to find that the gloss medium had dried much like it appears...

...a chemical behavioral change that made the gloss medium do this. What to do? I...

...surface again and re-apply the layers of gloss medium. This is what I did. The...

...edge areas, and put three layers of gloss medium on the surface. This time I...

...did not mix any paint with the gloss medium. It turned out great! You can...

The PRR Chartiers Branch - Progress Report - 2010-08 Report
...for a creek. I used "Mod Podge", Gloss, to create some subtle waves. The material...

The PRR Chartiers Branch - Progress Report - 2013-05 Report
...to add some waves. I used Liquitex Gloss Medium on a pair of rivers on...

The PRR Chartiers Branch - Progress Report - 2013-06 Report
... 06/19/2013 Last month I applied the gloss gel on the creek. This shot shows...

...Envirotex layer and then carefully worked the gloss gel around him. What spare time I...

The PRR Chartiers Branch - Progress Report - 2013-12 Report
...decided to add a third layer of gloss medium to Chartiers creek. I think I...

Railroading Books - How to Build Realistic Model Railroad Scenery
...flat bottoms. Building 3-D stream bases. Using gloss varnish, acrylic gloss medium, polyester resin, and...

...3-D stream bases. Using gloss varnish, acrylic gloss medium, polyester resin, and epoxies. Waves and...

Railroading Books - Scenery Tips and Techniques
...to model water. Modeling water with acrylic gloss medium. Sponge modeling. Modeling rapids, rushing water,...

Magazine Articles By Roger Holmes & John Evans
...N-scale harbor) using facial tissue paper and gloss medium liquid. It is an interesting technique...

Magazine Articles By Category: Scenery - Waterside
...N-scale harbor) using facial tissue paper and gloss medium liquid. It is an interesting technique...

Railroad Model Craftsman 2005-08 Articles
...N-scale harbor) using facial tissue paper and gloss medium liquid. It is an interesting technique...

glossary
Railroading Books - Railroading Along the Waterfront
...Inland Waterways 80 Modeling 116 Glossary 118 Product Index 120 Bibliography

Railroading Books - The Encyclopedia of Trains & Locomotives
...American Railroad Mergers 7 212 Glossary of Railroad Terminology 8 216...

...of Railroad Terminology 8 216 Glossary of Railroad Slang

Railroading Books - The Railroad What It Is, What It Does
...283 Engineering and Equipment 287 Glossary 311 Suggested Readings 317 Index

Railroading Books - Track Planning for Realistic Operation
... Examples of Operation-oriented Pikes 143 Glossary 144 Index

Magazine Articles By Andy Sperandeo
...Category: Layout Wiring Description: Glossary of terms. Simple diagrams and text explaining...

Magazine Articles By Don Fiehmann
...of this series. The article contains a glossary of DCC terminology, and a listing of...

Magazine Articles By Category: DCC
...of this series. The article contains a glossary of DCC terminology, and a listing of...

Magazine Articles By Category: Layout Wiring
...Author: Andy Sperandeo Description: Glossary of terms. Simple diagrams and text explaining...

Model Railroader 1995-06 Articles
...Category: Layout Wiring Description: Glossary of terms. Simple diagrams and text explaining...

Railroad Model Craftsman 2003-02 Articles
...of this series. The article contains a glossary of DCC terminology, and a listing of...

glosscote
Tools - Paints
...dull, and requires the application of Testors' Glosscote to prepare the surface for decal application....

Equipment - B&O M53 Box Car - Construction: Painting
...I sprayed a second coat of Testors' Glosscote over the model to protect the decals....

Equipment - PRR RS-1 Road Switcher - Construction: Painting
...and the whole body sprayed with Testors Glosscote. The model is now ready for the...

...decals, I also sprayed it with the Glosscote to make sure the two parts looked...

...did not spray the underbody parts with Glosscote. I let the Glosscote cure well over...

...underbody parts with Glosscote. I let the Glosscote cure well over two days (mostly a...

Equipment - PRR X37 Box Car - Construction: Painting
...few days, I sprayed it with Testors Glosscote. I let that dry overnight and then...

glossy
Scenery - Streets
...black paint I had and it is glossy. I may over-spray the whole area with...

...the whole area with Dullcote, although the glossy cracks look like they are wet from...

Tools - Paints
...to it right away (it leaves a glossy surface). Floquil's paint is dull, and requires...

...the paint is dry it is very glossy, which would be good for applying decals...

Equipment - B&O M53 Box Car - Construction: Painting
...paint. Also, the paint dried flat not glossy. I airbrushed the inside of the car...

...body has been sprayed to have a glossy surface, the decals are next. The kit's...

Equipment - PRR N5c Cabin Car - Construction: Completion
...ScaleCoat is that it gives you a glossy surface, so you can start applying decals...

gloucester
Railroading Books - Model Railroad Bridges & Trestles
...girder. 17 92 Modeling the Gloucester Draw This chapter is both a prototype...

glove
Scenery - Generic Background Trees
...other hand. By the way, use a glove on the hand that holds the tree,...

gloves
Painting - Airbrush Setup
...left is a box of disposable latex gloves. I put one pair on while cleaning...

Scenery - Abutments Casts
...made sure to wear an apron and gloves. After I mixed the two parts, I...

Equipment - B&O M53 Box Car - Construction: Painting
...on to the next step. Wearing disposable gloves I worked the underframe into the body....

glow
Equipment - PRR FM Flat Car - Construction: Decals
...takes PayPal), or you can contact Jerry Glow (who can produce them as ordered in...

Equipment - PRR H21a Hopper - Construction: Completion
...inventory). Another decal possibility is Jerry Glow's decals, which can be special-ordered in...

glowing
Equipment - PRR FM Flat Car - Model Information
...Also, the reviews of the kit weren't glowing. I had previously scratch-built the PRR H21a...

Magazine Articles By Lee Vande Visse
...Cars Description: Unique hot-metal cars. Simulating glowing metal in the cars using miniature fluorescent...

Magazine Articles By Category: Freight Cars
...Visse Description: Unique hot-metal cars. Simulating glowing metal in the cars using miniature fluorescent...

Model Railroader 2002-12 Articles
...Cars Description: Unique hot-metal cars. Simulating glowing metal in the cars using miniature fluorescent...

My Library - Photo Albums - Southern Forest Heritage Museum
...on a bolt head that is still glowing. This (over-exposed) photo shows the blower that...

glue
Animation - Experimental Doors
...to me one day. I could simply glue the door to a fairly stiff metal...

...stand. I used some H-columns and Testors glue to connect the parts. Here is the...

...the final model I will most likely glue a piece of styrene to the actuator...

S-scale Vehicles - 1937 Duesenberg Cord
...kit was easy to assemble, with no glue required. It took about 15 minutes. This...

S-scale Vehicles - 1950 Oldsmobile 88
...it is doable. I started using canopy glue, but that turned into a disaster. The...

...but that turned into a disaster. The glue won't hold to the metal body. I...

Electronics Projects - Helix Elevator Lights
...glued in place (I used yellow carpenters glue). Another after-installation photo. Although the circuit boards...

...the helix structure. I decided to simply glue them to the vertical posts of the...

...(I had a new tube handy!). The glue is very tacky and sets in a...

...to the helix structure using the same glue as mentioned above. The inset photo shows...

Hand-building Crossings - Building a Crossing
...of superglue to the joint. After the glue set, I used a knife to shape...

Hand-laying Track
... 03/17/2009 How I cut and glue ties. 2. Preparing and Applying Ballast...

Hand-laying Track - 1. Preparing and Installing Ties
...mark it off with a pencil. I glue the ties down to the painted sub-roadbed...

...in this case) with Elmers yellow carpenter's glue. I simply spread a thin layer of...

...simply spread a thin layer of yellow glue over the area onto which the ties...

...and then press the ties into the glue. Be sure not to have too much...

...Be sure not to have too much glue, because the glue will prevent stain from...

...to have too much glue, because the glue will prevent stain from penetrating the ties...

...the ties later on. Also, spread the glue over as large of a section as...

...in a few minutes, or else the glue may be dry by the time you...

...get to that section. After all the glue has dried, I use the thin edge...

...I have to be careful about excess glue. Once the glue hits the wood it...

...be careful about excess glue. Once the glue hits the wood it seals it from...

...stain, so any exposed wood covered with glue will never be stained. Next, I cut...

Hand-laying Track - 2. Preparing and Applying Ballast
...If the track has a slope, I glue the ballast to the slope area first....

...slope, I use full-strength matte medium (white glue would work as well). I cover a...

...the area that I am about to glue. You can also use rubbing alcohol, but...

...the water is just to allow the glue to be more readily absorbed into the...

...I use a small, re-used Elmers white glue bottle for applying the glue. It allows...

...Elmers white glue bottle for applying the glue. It allows me to place one drop...

...drop in just the right spot. The glue is actually a mixture of 50% matte...

...bottle. The ballast is covered with this glue mixture one drop at a time. I...

...time. I try to avoid placing the glue on the ties, because it can leave...

Hand-laying Track - 6. Track Details
...I use a pair of tweezers and glue them in place with superglue or...

...place with superglue or Aleene's Tacky Glue. This photo shows one such set of...

Hand-laying Track - 7. My Checklist
...ceiling tiles between each other. Glue the ceiling tiles to the MDF using...

...ceiling tiles to the MDF using wood glue. Dries in 30 minutes. Fill...

...Spackling. Sand filler. Glue Masonite splice plates under the MDF where...

...NWSL Chopper; sand if necessary. Glue ties to ceiling tiles using wood glue....

...Glue ties to ceiling tiles using wood glue. Allow at least one hour...

...Soak the area with "wet water", and glue down with watered-down Matte Medium....

Hand-building Turnouts - Code 40 N-scale Turnout
...turnout parts on the workbench, and then glue them in place on the layout. My...

...stock rails (typically the straight one) and glue it into place on the ties on...

...space and position the frog assembly, and glue it in place. Make sure not to...

...it in place. Make sure not to glue the point rails all the way down...

...of wood with 5-minute epoxy (the same glue I use for gluing all rail to...

...the ties). Much to my amazement, the glue held and the points worked great, even...

...wrong side of the frog), and place glue under them. I then place the guard...

Hand-building Turnouts - Code 55 N-scale Turnout
...Regular and scale ruler (metal) White Glue Toothpicks Tweezers Some kind...

...flat and tight as possible. When white glue is applied, the paper tends to curl...

...but they can never be lengthened! Next, glue the PC ties to the paper template...

...the paper template with full strength white glue (a few drops spread under the PC...

...I let mine dry overnight. Do not glue the throwbar to the paper! I use...

...paper. This makes contact with the white glue, which looses its hold on the PC...

...the rails using 5-minute epoxy. I don't glue any ties in the area where the...

Hand-building Turnouts - Code 83 S-scale Turnout
...this tiny part. I wait for the glue to dry, and some time before I...

...in the correct position. I use super glue to hold them in place, so they...

Hand-building Turnouts - My Turnout Construction Checklist
...frog wires are. Cut and glue styrene filler pieces. After glue...

...glue styrene filler pieces. After glue is dry, trim filler pieces....

Painting - Paint Caddy
...moment you knock over the paint or glue bottle. These bottles we use are so...

...board is glued to it. After the glue has dried, I use a disc sander...

...They are extremely handy for holding the glue bottle or the one paint bottle you...

General Rolling Stock - Coupler Gauge
...The tighter the fit, the better the glue will work. The fact that the plywood...

General Rolling Stock - Load of Crates
...to size and glued with yellow carpenter's glue. Crates come in all different sizes, shapes,...

...the next photo. One little drop of glue was used to hold these in a...

General Rolling Stock - Painting Wheels
...is to go and then spread the glue between the pencil marks using the popsicle...

...some weights on the rail until the glue set. Once the glue was dry, the...

...rail until the glue set. Once the glue was dry, the jig is ready for...

General Rolling Stock - Power Generator Load
...were glued to each other using white glue. I then used superglue to glue the...

...white glue. I then used superglue to glue the cardboard to the bottom of the...

General Rolling Stock - Vertical Engine Load
...to the paper/cardboard platform using yellow wood glue, very sparingly. I made sure that they...

...to permanently fix the flywheels. After the glue dried, I cut off the rest of...

...engine to the platform using Aleene's tacky glue. The kit comes with some string to...

N-scale Equipment - Bachmann Doodlebug - Coupler Conversion
...removed, it was a trivial task to glue up the MT coupler with Walthers Goo....

N-scale Equipment - Bowser Hoppers - Coal Load
...Medium evenly mixed with water for the glue. I sprayed household rubbing alcohol after I...

...rubbing alcohol after I placed drops of glue over the styrene sheet. This caused the...

...over the styrene sheet. This caused the glue to saturate the whole area. I kept...

...I kept adding layers of coal and glue, forming a raised ridge down the center...

N-scale Equipment - Kato 2-8-2 - Coupler Conversion
...the final result. I used Walthers' Goo glue to bond the coupler to the tender...

...with the coupler installed. I had to glue a thin piece of styrene (transparent) to...

N-scale Equipment - Kato Passenger Cars - Coupler Conversion
...checker tool in the photo. Because the glue only lasts for a few minutes before...

...car body's door. Prepare the 5-minute epoxy. Glue the shim pieces of styrene to the...

...to the passenger car's underframe. Use the glue sparingly. Make sure that it stays away...

...the outer body, just in case the glue oozes a bit. Wait a minute or...

...on you when you're installing the coupler). Glue the coupler in the center of the...

N-scale Equipment - Life-Like SW9 - Coupler Conversion
...of styrene. I used 5-minute epoxy to glue the couplers in place. There isn't a...

N-scale Equipment - Life-Like SW9 - Disassembly
...not trivial. Mine had a bit of glue in the back corner of the cab,...

...I knocked mine off. I'll have to glue it back when I am done. I...

...an angle. Both have a bit of glue under them, which prevents them from falling...

N-scale Equipment - Micro-Trains Box Car X26 - Adding Weight
...keep the shot in the box. Plastic glue was all that I needed to assemble...

...in place. At first I tried white glue, thinking that since it is liquid enough...

N-scale Equipment - Model Power 4-6-2 - Coupler Conversion
...it in that indent with Testor's plastic glue. I then painted it with Floquil's "Engine...

...step part also. I will have to glue it back in place later on. The...

N-scale Equipment - Rivarossi 2-8-8-2 - Coupler Conversion
...body so that I could apply the glue. The white under the coupler is the...

...a small brush wet with the Testors glue and let it get a better grip....

...with the brush and put on more glue. I took this photo while everything was...

...in the tender, the coupler fell off. Glue doesn't seem to work too well. I...

N-scale Equipment - Rivarossi 2-8-8-2 - DCC Conversion
...step was to use Walther's Goo to glue the two wires to the weights for...

S-scale Couplers - Sergent Couplers - Old Design
...upper half. I then used superglue to glue the body halves together. I carefully held...

...instantaneously. I made sure to keep the glue away from the coupler face and the...

S-scale Couplers - Sergent Couplers - New Design S
...how it falls in place. Before applying glue, verify that the coupler head can be...

...I caught it before I applied the glue. This shows the coupler head in its...

...to apply a tiny amount of the glue at those spots. I then let it...

...yet, until you are absolutely sure the glue has completely cured, or else the ball...

Scenery - Abutments Casts
...razor blade. I, then, used ordinary white glue to hold the box' parts together. As...

...the bottom of the box using white glue also. The vertical pieces are almost 1/2"...

Scenery - Conifer Trees
...I use the 3M Super 77 spray glue to glue these short strips to the...

...the 3M Super 77 spray glue to glue these short strips to the branches. I...

...spray the tree armature briefly with this glue. Kind of hard to make out in...

...smaller branches, I spray them with the glue one more time. This "Christmas tree" is...

...the dark green spray can. After the glue has had some time to dry, I...

Scenery - Foreground Trees
...of the tree with full-strength Elmer's white glue (Glue All). I generally apply the glue...

...the tree with full-strength Elmer's white glue (Glue All). I generally apply the glue on...

...glue (Glue All). I generally apply the glue on all branches where two or more...

...crannies. After several hours of letting the glue dry, this is what the tree looks...

...to the lid! Much like the white glue layer, the paste is applied with a...

...This time I used both 3M spray glue and hairspray (both had the same effect)...

...each other while they are sticky with glue. I was spraying my trees with Testors...

Scenery - Generic Background Trees
...sisal rope (Lowe's, hardware store) spray glue (Lowe's, hardware store) spray paint (for...

...armature in the desired position while the glue sets. I space the armatures around the...

...of superglue at the joint. After the glue cures, I apply another drop. The bare...

...a lot of the first drop of glue. Next, I shape and trim the armature...

...the tree its overall shape. Once the glue is dry, you can carefully bend the...

...to the dowel trunk) outside and spray glue over the armatures. I use 3M Super...

...armatures. I use 3M Super 77 spray glue. It costs $11 here in Houston, Texas...

...I have bought the cheaper Duro spray glue, but it just doesn't hold things (I...

...days the material starts falling off. 3M's glue is much better and worth the extra...

...I then spray the tree with the glue again and apply a second coating of...

...formation. I then spray the tree with glue one more time to make sure the...

...second set of pieces are secure. The glue leaves a white residue, which is why...

...armature using the same 3M Super 77 glue. It is a good idea to use...

...dip the trunk wire in some white glue, and plant the tree. When the glue...

...glue, and plant the tree. When the glue dries, the tree is in the base...

Scenery - Generic Foreground Trees
...and 1/2" (crafts, hardware store) spray glue (hardware store) acrylic paints (hobby, crafts...

...end of the branch with some white glue and insert the branch in the hole....

...towel to remove some of the excess glue, but not too much. The glue will...

...excess glue, but not too much. The glue will dry somewhat clear and it will...

...on the polyfiber trees using 3M's spray glue. It worked, but a couple of the...

Scenery - Scenery Base
...form you prefer. External Reference: glue gun To...

...and to the benchwork using a small glue gun. These can be had for less...

...you buy a bag or two of glue sticks that fit the glue gun you...

...two of glue sticks that fit the glue gun you buy or have. You will...

...new idea to me). I use the glue gun, which makes quick work of this...

...latex paint (earth-tone) - 3/4 parts white glue - enough water to keep the mixture...

Scenery - Scenic Barrier
...wood screw, and then used yellow carpenters glue to glue them to the barrier strip....

...and then used yellow carpenters glue to glue them to the barrier strip. Before, or...

Scenery - Streets
...of the scenery base. I used Aleene's glue to keep the wood attached to the...

...fill in the cracks with Aleene's tacky glue. At first I carefully used a toothpick...

...carefully used a toothpick to insert the glue, but later I just held the bottle...

...top of the crack and squeezed the glue into the crack until it started to...

...so it took a good amount of glue. The glue is white initially, but it...

...took a good amount of glue. The glue is white initially, but it dries clear....

...a satisfactory fill depth. I let the glue dry overnight. You could leave the road...

...passage over the tracks. I used Aleene's glue to glue the boards down to the...

...the tracks. I used Aleene's glue to glue the boards down to the ties. I...

Scenery - Telegraph/Telephone Poles
...and acrylic white paint for weathering. For glue I used yellow carpenter's glue and the...

...weathering. For glue I used yellow carpenter's glue and the ever-present superglue. For tools I...

...was square and even. There is no glue involved here; it is just a dry-fit....

...a toothpick and carefully applied yellow carpenter's glue into each of the remaining grooves in...

...Be sure not to apply too much glue, because that might ooze out and it...

...these dried (about 30 minutes for the glue I use), I applied glue to the...

...for the glue I use), I applied glue to the top groove and glued that...

...for the remaining four poles. Once the glue was dry, I cut the crossarms down...

...that you don't put pressure on the glue joint and get a nice straight cut....

...superglue has on the wood if the glue is applied to the wood before you...

...(the right of center), and applying the glue after stain has been applied (left of...

...locations). I used five-minute epoxy to actually glue the poles in the ground. A series...

...in their near-perfect vertical position while the glue set. In the real world the crossarms...

...they are perpendicular to the track. Any glue residue still visible after the poles are...

...glued to the "insulators" using Eileen's Tacky Glue (superglue doesn't work). The see a...

Storage - Equipment Storage
...the parts in place; no need for glue. This also makes it easy to replace...

Storage - Strip Storage
...work space and used 5-minute epoxy to glue the styrene squares to the bottoms of...

...labels are easy to read. After the glue had set, I used clear tape to...

...next! One side note: make sure the glue used for the bottom is thoroughly dry...

Tools - Clamp Wall Rack
...took about 3 hours to build (including glue drying time). I started off with a...

...of 2" wide Oak plywood, and then glue pairs together to form the blocks. Next,...

...spacer piece, and using the speed square, glue, and two screws for each, all the...

...and, while I was waiting for the glue to dry, I pondered how I was...

...clamps hanging from the rack. With the glue dry, I installed the top part of...

Tools - Fence Extension
...boards attached to each other with wood glue and screws. The hard part was to...

Tools - Lightbox
...screws. In retrospect, I wouldn't buy the glue either. See below as to why. I...

...together. I decided not to use the glue, because the parts are held together plenty...

Tools - Panel Cutting Sled
...took about two hours to build, including glue drying time. I went to the hardware...

...photo below, I am getting ready to glue the poplar to the plywood. Then with...

...is to produce square cuts. While the glue was drying I ripped a piece of...

...sense in continuing. Everything was absolutely perfect! Glue alone probably won't hold the fence in...

...strip to force it down while the glue dried. Again, making sure that the piece...

Tools - Router Table
...both dimensions. The next step was to glue the vinyl counter top to the MDF...

...I needed for the table top, and glue it with Contact Cement. I coated both...

Tools - Small Tools
...use styrene in your modeling, get this glue. Throw away the plastic glue that comes...

...get this glue. Throw away the plastic glue that comes in the tubes. There are...

...other products that are similar to this glue, but I've always been happy with Testors...

...or pieces of styrene together while the glue sets. I picked up this package of...

Tools - Work Bench LED Lighting
...be glued, and I applied Aleene's Tacky glue to the styrene. I removed the paper...

...metal weights on each strip until the glue was dry. The LED strip allows for...

...I later reinforced with a counter-sunk screw (glue alone proved to be too weak). At...

Tortoise Installation Ideas - Sideways Installation
...the block of wood down while the glue dried. The next step was to solder...

...first I was worried about how to glue this whole assembly to the benchwork while...

...with a lot of weights while the glue dried. The actuator rod has been loosened...

...and it did. I then used carpenter's glue and permanently installed it. Now I can...

...is to hold it down while its glue is drying.

Custom Track Solutions - Helix
...the luan sub-roadbed boards later. After the glue dried I drove in wood screws for...

...pull it off again and spread the glue on the AMI Roadbed. I place the...

...the track to hold it while the glue dries. By the way, I started using...

...I started using rubber cement for the glue, but while I was about halfway up...

...switched to using Liquid Nails for the glue. I had to go back to these...

...levels afterwards and carefully re-apply Liquid Nails glue. Not fun! I decided to attach track...

...the track firmly in place until the glue dries. Even though I have about 4...

...of the track. This allows the wood glue to dry that is used to connect...

...plywood that is being glued. While the glue was drying, I started the wiring process....

Custom Track Solutions - Pivot Table
...it is easier to turn. Once the glue was dry (about three hours later), I...

Trackwork - Ballasting Flextrack
...8 to 12 inches before applying the glue. This is because it takes about as...

...the whole area I am about to glue, and then focus the alcohol spray on...

...quickly. And finally it is time to glue. I use a small glue bottle that...

...time to glue. I use a small glue bottle that is filled with 50% white...

...bottle that is filled with 50% white glue, 50% water, and one drop of dishwashing...

...is wet enough from the alcohol, the glue should spread out and dissolve into the...

...and dissolve into the ballast. If the glue balls up or causes the ballast to...

...Simply spray more alcohol. I spread the glue down the middle of the track, and...

...A quick spray of alcohol disperses the glue even more and also eliminates air bubbles...

...and also eliminates air bubbles in the glue which may relocate some of the ballast...

...relocate some of the ballast as the glue dries. Whatever you do, do NOT...

...the result, you can always wet the glue with water later, when all of the...

...in some spots. Once you apply the glue, it is best to just walk away...

...the rails because they may have some glue residue on them. After that it is...

Trackwork - Laying Flextrack
...a while, I usually drop some white glue on them to hold them down to...

Trackwork - Painting Flextrack
...down. Note I that I do use glue, such as Liquid Nails, to initially attach...

Trackwork - Roadbed
...the Roadbed will move around on the glue. For the layout mentioned above, I laid...

...between two sheets of styrofoam so the glue, if it dries at all, takes "forever"...

...was that once I did manage to glue a couple of sheets together, they were...

...flat. Even though I took care to glue them on a flat surface, for some...

...a flat surface, for some reason the glue must have pulled them at an angle....

...again face the issue of how to glue this foam to the painted MDF sub-roadbed....

...Woodland Scenics recommends their own Foam Tack Glue. Generally I find their products too expensive,...

...Hobby Lobby and they didn't have the glue in stock. I spent some time doing...

...referred to Pliobond. The advantage of that glue was that it should work with foam...

...all. I also tried Elmers wood glue, because I read on some websites where...

...websites where people had used that to glue foam. After 30 minutes of drying time,...

...back to Lowe's to find some other glue. I had used PL Foam Board Adhesive...

...Foam Board Adhesive when I tried to glue the layout base's insulation styrofoam sheets, but...

...the sub-roadbed. I had tested the Loctite glue with a sample piece of foam and...

...onto the MDF using Elmers yellow carpenters glue. I took advantage of the tongue-and-groove system...

...of scrap MDF using Elmers yellow carpenters glue and another test piece using Liquid Nails...

...for Subfloors. Both provided an extremely secure glue joint. The Liquid Nails had a bit...

...so I chose to use the Elmers glue. Then I tested gluing a basswood tie...

...tile. I used both Elmers yellow carpenters glue and Matte Medium. Again, both created a...

Trackwork - Track Cleaning
... For removing paint and glue from the rail heads, a flat eraser...

Trackwork - Track Inspection Car
...the couplers' screws to install them. The glue works fine too, though. You can manipulate...

...the coupler screws are actually self-tapping. The glue didn't hold the coupler boxes for but...

...freight car. Five-minute epoxy was used to glue them down. I removed the trucks and...

Woodworking - Control Panels
...Masonite hardboard using 90-minute epoxy. Any other glue will soak through the paper and ruin...

...put some weights on it while the glue sets. Next, I very carefully cut the...

Woodworking - Foldable Workbench
...bottom of the top board using wood glue. These make sure the workbench stays flat....

...to hold something down. Waiting for the glue to dry takes some time. So the...

...hinge assembly can rotate freely. Once the glue dried, I installed the legs, making sure...

Woodworking - Layout Cabinets
...the pieces together using Elmers carpenter's wood glue. For the larger drawers, like this one,...

...wood screws. However, for the thinner drawers, glue is more than enough. I am still...

...front will rest on them as the glue sets. You will notice the paint cans...

...and goes quite smoothly. I then put glue on the back of the drawer front,...

...gluing the foam in the drawer are glue (WeldBond or Elmers white glue), a disposable...

...drawer are glue (WeldBond or Elmers white glue), a disposable foam brush, and a wet...

...is needed to clean up any stray glue and to keep the fingers clean. I...

...the drawer. I proceeded by putting some glue on the foam brush, and applied that...

...and applied that to the drawer. The glue grips the foam very well, so there...

Woodworking - Portable Modeling Table
...x 21" x 30" plywood top wood glue (Elmers' yellow) This is a fairly...

...first step in the assembly was to glue the bottom, 4-inch tall pieces of plywood...

...desired, we made the decision to simply glue the 2x4 legs to the inside of...

Equipment - PRR FA-2/FB-2 Cab Units - Model Information
...very easily. A little bit of "canopy" glue fixes that problem. Apparently one of...

Equipment - PRR FA-2/FB-2 Cab Units - DCC Conversion
...is glued to the shell using hot glue. If you need to replace the headlight...

...replace the headlight LED, use a hot glue gun to melt the original glue. To...

...hot glue gun to melt the original glue. To actually install the decoder, I removed...

Equipment - PRR FA-2/FB-2 Cab Units - S-CAB
...hold the pieces in place while the glue sets. During my first install I discovered...

...The battery was attached using Aleene's Tacky Glue. From the first install, where I had...

...install, where I had used the same glue, I found that it was relatively easy...

Equipment - PRR FM Flat Car - Coupler Conversion
...the coupler. Well, I was wrong. The glue really held them in place. This is...

...spring). I then used 5-minute epoxy to glue the coupler to the body. A quick...

Equipment - PRR FM Flat Car - Construction: Frame
...hold all of it together while the glue sets. I now have a truly square...

Equipment - PRR FM Flat Car - Construction: Wheels and Couplers
...car's sides. I am getting ready to glue it down. This makes the piece bend...

Equipment - PRR FM Flat Car - Construction: Stake Pockets
...edge of the base and apply Testors glue to the joint. I let this dry...

...I then flip the half-C-channel over and glue the other strip in like manner, again...

...to be the stake pocket body. To glue these onto the side frame, I lightly...

...was to put a dab of Testors glue right on the pencil mark, making sure...

...I placed the stake pocket on the glue, positioning it just below the rounded curve...

...you have some working time with the glue. Note that first positioning the stake pocket...

...pocket and then coming back with the glue didn't work, because it always shifts the...

...I then apply one drop of Testors glue to each flare. This connects the flare...

Equipment - PRR FM Flat Car - Construction: Exterior Details
...the car. I first used Testors plastic glue, and, after that glue dried, I put...

...used Testors plastic glue, and, after that glue dried, I put a drop of superglue...

...center of the car), and applying Testors glue. I used a weight and ruler to...

...from slowly falling over. I let the glue set for a good while. I then...

...you see, each part installed using Testors glue. When all of that was dry, I...

...the styrene body. This provides lots of glue points for the brake shaft, which should...

Equipment - PRR FM Flat Car - Construction: Decking
...on the car at a time. For glue I decided to use Aleene's Tacky Glue....

...glue I decided to use Aleene's Tacky Glue. It grabs right away, while still allowing...

...boards. I applied a thin layer of glue to three of the length-wise boards only....

...the outside ones to avoid seeing any glue oozing out. I then carefully transferred the...

...decided to leave it on until the glue dried. I was afraid of the masking...

...I was afraid of the masking tape glue leaving a residue on the boards. That...

...remove as much of the masking tape's glue as possible. And here is the car...

Equipment - PRR GLa Hopper - Construction: Frame
...where you want to be sure to glue two pieces of styrene together at a...

...perfectly. Only then do I apply the glue to bond them. The magnets of the...

...the strip of styrene and applied the glue. Fairly quickly after applying the glue, I...

...the glue. Fairly quickly after applying the glue, I moved the squares away from the...

...frame so as to avoid having the glue attach the styrene to the metal. Note...

Equipment - PRR H21a Hopper - Construction: Conclusion
...the load. Another solution could be to glue some more lead shot in the bottom...

Equipment - PRR H21a Hopper - Construction: Frame
...This photo shows the sill after the glue has set. The styrene sheet hasn't been...

...the above-mentioned magazine article have you only glue the end sills to the center sills,...

...install the end cross braces, and finally glue the side sills. I didn't think that...

...guaranteed square frame. So, I decided to glue the basic frame and then deal with...

...more challenging). The way I did my glue-up is I placed one end sill over...

...sure they were square, and then applied glue to the end sill-to-side sill joint only....

...the end sill-to-side sill joint only. Don't glue the center sill yet. I then did...

...the corner of the bolster). Once inserted, glue it in place. The side sills are...

...lip of the side sill. Once the glue dries, this makes for a very strong...

...top of this page), I had to glue the brake levers to the underside of...

Equipment - PRR H21a Hopper - Construction: Body
...same, as per the prototype! After the glue set, I cut and filed each of...

...here is to keep them straight and glue them in the center of the 1x6....

...the center of the 1x6. While the glue is drying on the first one, I...

...panels in position while I applied the glue. Now it is starting to look like...

...held the piece in place and applied glue. This was kind of a delicate operation,...

...four corners of the car. When the glue has set, I cut and filed the...

...looks. I wound up using Aleene's Tacky Glue to hold the bottom of the angle...

...the car, while I used normal Testors glue to glue the top of the strip....

...while I used normal Testors glue to glue the top of the strip. Accurately spacing...

Equipment - PRR H21a Hopper - Construction: Wheels and Couplers
...fabricate a new one from styrene, and glue it much closer to the bolster to...

Equipment - PRR H21a Hopper - Construction: Interior
...in the photo. I could then apply glue to the seem. I put the car...

...while I'm waiting on the other divider's glue to dry. After some more tweaking and...

...the center one in place while its glue was setting. Not much pressure is applied;...

Equipment - B&O M53 Box Car - Construction: Body
...to be there!?! I did manage to glue the pieces of the bottom of the...

Equipment - B&O M53 Box Car - Construction: Underbody
...to size. I used 5-minute epoxy to glue those that came loose. The centersill is...

...to hold the centersill down while the glue is drying. When installing the centersill, try...

...used 5-minute epoxy rather than superglue to glue these in place. I followed the kit's...

...epoxy I had to wait for the glue to dry and make sure that during...

...keep in the right position while the glue was being applied. I could not for...

...requires a small section of chain. To glue that chain I held it in a...

...flat surface. This got rid of any glue globs and made all the boards the...

Equipment - B&O M53 Box Car - Construction: Adding Details
...roof walk. I used 5-minute epoxy to glue it down to the roof of the...

...hold the roof walk down while the glue dried. Also barely visible in this photo...

...under the roof walk and provides the glue surface to the roof walk. I used...

...the roof walk. I used superglue to glue it in place, by placing the glue...

...glue it in place, by placing the glue on the lip and then using a...

...There are two different-sized tack boards to glue to the doors. The doors fit in...

...I will decide whether or not to glue them in place.

Equipment - B&O M53 Box Car - Construction: Painting
...the body later on. That way the glue will be bonding the resin parts rather...

Equipment - PRR N5c Cabin Car - Construction: Underbody
...fit one between each underframe detail and glue them into small holes. The wire was...

...new part so that it had more glue surface and built-up the whole assembly. The...

Equipment - PRR N5c Cabin Car - Construction: Wheels and Couplers
...glued. I also put a dab of glue where the brake wheel stand hits the...

...and hold it straight while applying the glue. There is a rectangular cover that surrounds...

...first two in one wall. After the glue cures, I used a pair of cutters...

Equipment - PRR N5c Cabin Car - Construction: Exterior
...in prototype photos so I decided to glue them in their spots. The tiny rectangular...

Equipment - PRR N5c Cabin Car - Construction: Interior
...wood using one drop of Eileen Tacky Glue. That makes them easy to remove once...

Equipment - PRR N5c Cabin Car - Construction: Completion
...model. This removes a bit of the glue from the tape, so it won't mar...

...them in place using Formula 560 "Canopy Glue". This photo shows two pieces being glued...

Equipment - PRR N5c Cabin Car - Construction: Interior Lights
...That being the case, I decided to glue the circuit board to the underside of...

...the marker lamp with Formula '560' canopy glue. It goes in white, but it dries...

...hole of the marker lamp (remember, the glue fills up the entire inner chamber of...

Equipment - PRR NW2 Switcher - Sergent Couplers
...box cover, which was attached with styrene glue. This keeps the coupler from falling out,...

...these to the steps assembly using styrene glue. I then cut some more 2x6 pieces...

...front coupler area. I also decided to glue the handrails in place using superglue. Those...

Equipment - PRR NW2 Switcher - ProtoMax Couplers
...thicknesses, an NWSL Chopper, and Testor's styrene glue, I made a shim that perfectly matched...

Equipment - PRR NW2 Switcher - S-CAB
...which is why you see the white glue residue. Once that was removed, there is...

...below) that can be lifted up (no glue used). This then allows the removal of...

...the hard way). I am going to glue the battery to the shelf, but the...

...have a solid surface onto which to glue the battery. This is actually my second...

...I did that one using 5-minute epoxy glue, which did not hold up well. For...

...this second installation I spread some hot glue (using a hot-glue gun, of course) on...

...I spread some hot glue (using a hot-glue gun, of course) on the styrene, and...

...quickly pressed the battery on to the glue. It sets in a few seconds, and...

...wanted to. I used 5-minute epoxy to glue the brass strips to the underside of...

Equipment - PRR RS-1 Road Switcher - Construction: Completion
...allowed me to apply "Formula 560 Canopy Glue" (bought at a local R/C hobby shop)...

...the lens made contact. I applied the glue using a toothpick. Within an hour the...

...using a toothpick. Within an hour the glue dried and it became completely transparent (no...

...to hold the wire down while the glue set. The next photo shows the end...

...the LED's casing, the wires, and the glue with the same color as the interior...

...cover right before gluing. I used canopy glue to minimize the residue left behind. Most...

...seal the edges. I also used the glue to make sure all the tiny holes...

...inside of the hood. I also put glue around the wires. This completes the speaker...

...a bit of patience waiting for the glue to set (I had to try it...

Equipment - PRR RS-1 Road Switcher - S-CAB
...square tubes, and used five-minute epoxy to glue them to the frame. Then it was...

...exposing the push button. There isn't much glue surface on the switch itself, so I...

...with styrene, to provide me with more glue surface. I then used five-minute epoxy to...

...shelf. When dry, I was able to glue the whole assembly, using five-minute epoxy, to...

Equipment - PRR RS-1 Road Switcher - Construction: Body
...brave! Note that I always apply the glue with a tooth pick. The short hood...

...the radiator, so I believe I will glue it in place soon. The grill is...

...that make up the body together (no glue!). This made sure the two hoods fit...

...flipped the parts over and applied super glue to the inside joints. I placed the...

...to hold the parts together until the glue had set. I did the same thing...

...the two halves together using 5-minute epoxy glue. The next photo shows the parts that...

...that they were flat. I then apply glue to the side of the steps and...

...steps to provide clamping pressure while the glue set. The back plate of the pilots...

...the part to the steps while the glue set. I am doing this on the...

...This is the set-up I used to glue the pilots to the underside of the...

...to the lip that was used to glue the two halves of the running boards...

...underside of the running board while the glue set. This also makes the running boards...

...the alignment of the pilot, because the glue may make it move. Be sure to...

...Be sure to wipe off any excess glue that oozes out. These are the two...

...needs to be flipped around, because the glue joint of the short and long running...

Equipment - PRR RS-1 Road Switcher - Construction: Body Assembly
...to fit. I used 5-minute epoxy to glue the part in place. This close-up photo...

Equipment - PRR RS-1 Road Switcher - Construction: Chassis
...they will be corrected later. After the glue had plenty of time to set, I...

...and become a nice rectangle. After the glue had dried, I slipped them over the...

...fit perfectly, and I was able to glue them into place. The instructions tell you...

...sub-assemblies to hold them down while the glue set. The front edge of the fuel...

Equipment - PRR RS-1 Road Switcher - Construction: Adding Details
...the NWSL Chopper. I glued, using styrene glue, those pieces to a section of 0.010"...

...not all come out usable. After the glue dried, I filed them down to where...

...is easy to pour in too much glue, which is why a good number of...

...front edge of the cab roof), and glue it into place. The back of the...

...is how I found out that the glue-up solution mentioned above was quite strong, but...

...engine. After that I removed any remaining glue residue and decided to sleep on the...

...glass and used Testors' plastic cement to glue the angle to the very bottom of...

...I press the part down into the glue and then use a small T-square to...

...third handrail stanchion. I used 5-minute epoxy glue to install them (lay the engine on...

...keep the part in place while the glue sets). On the short hood end the...

...back of the shades has a flat glue surface, so it is easy to get...

...correct angle. I used 5-minute epoxy to glue them in position and then used a...

...to hold them in position while the glue set. You will want to install cab...

Equipment - PRR X29 Box Car - Kit Construction
...paint brush to put one drop of glue on the top of the corner. After...

...dry, I came back and added more glue on the inside of the corner. I...

...process. I put a small drop of glue in the roof's holes where the mounting...

...careful application of a tiny amount of glue at each of the roof support brackets....

...the floor board. The instructions mention to glue the "intermediate cross bearers" to the underframe....

...it would have been better to first glue them to the body and then...

...orientation. Because I am now going to glue the underframe to the body, the metal...

...in place, and then used the Testors glue to glue it to the body. Next,...

...and then used the Testors glue to glue it to the body. Next, I mixed...

...pressed on to the blocks with the glue. After 5 minutes, the weight was in...

...I had forgotten to bend down and glue the two strips that attach the roof...

...one of the four broke, however the glue "re-attached" the piece again. Here's a photo...

...with the Grandt Line kit and carefully glue it with superglue to the two brake...

Equipment - PRR X37 Box Car - Construction
...weights on it, to make sure the glue cured with a straight roofwalk (it did!)....

...using superglue. I tried using Testors plastic glue, but it didn't work for this kit's...

...on and fit perfectly. I decided to glue mine closed because I didn't want to...

...with a couple of erasers while the glue set. My kit didn't come with the...

...then quickly and carefully placed before the glue sets. Using 5-minute epoxy might have been...

...I carefully applied a thin bead of glue to the inside edges of the body...

...so be careful about using too much glue. After installing the roof, I put some...

...roof to hold it down while the glue set. The next photo shows the car...

Bear Creek & Eastern - Progress Report - 2006-02 Report
...about one foot to provide lots of glue surface. I used every clamp I could...

...wax paper under the spline to prevent glue from damaging the bookcases and workbench. Well,...

...to smooth out the roadbed after the glue had dried was very difficult and labor-intensive....

...All was held together with yellow Carpenter's glue. The first one is always the most...

...glued to the sub-roadbed using diluted white glue. Within a week all of the main...

Bear Creek & Eastern - Progress Report - 2006-06 Report
...web and held in place with hot-melt glue. This web was covered with newspaper. I...

...covered with newspaper. I used some hot-melt glue to hold the newspaper in position. I...

Bear Creek & Eastern - Progress Report - 2007-02 Report
...hold the panels in place while the glue set. However, as can be seen in...

...is a great clamping tool! After the glue set, I removed the tape and clamps....

Bear Creek & Eastern - Progress Report - 2007-09 Report
...here. This shows the track after the glue dried. However, as soon as the glue...

...glue dried. However, as soon as the glue was dry (I used 5-minute epoxy to...

Bear Creek & Eastern - Progress Report - 2008-02 Report
...of the existing ties. I could then glue the vertical boards in their correct location...

...cut and placed on the cabinets. Small glue blocks held them upright. These were just...

...cookie-cutter roadbed of the center section using glue. Here the glue is drying. On the...

...the center section using glue. Here the glue is drying. On the other side, where...

Bear Creek & Eastern - Progress Report - 2008-03 Report
...the pressure on the cork while the glue is curing, because directly clamping it would...

Crystal Creek Module - Progress Report - 2005-01 Report
...bookcases. The box was assembled using wood glue only. No screws. Later on I will...

Crystal Creek Module - Progress Report - 2005-02 Report
...bridge to the module using 5-minute epoxy glue. I used Sculptamold to form the sub-roadbed...

...sections at a time) with diluted white glue (50% glue, 50% water), applied with a...

...a time) with diluted white glue (50% glue, 50% water), applied with a cheap foam...

...with a cheap foam brush. Before the glue dried, I sprinkled brown and various shades...

Crystal Creek Module - Progress Report - 2005-06 Report
...track in gauge and down while the glue sets. Rail feeder wire is always soldered...

P & C Railroad Version 2 - Progress Report - 2000-10 Report
...to hold it in place while the glue sets. ( to next month's report... )

P & C Railroad Version 3 - Progress Report - 2001-12 Report
...are glued into place with yellow carpenter's glue applied with a tooth pick. They are...

P & C Railroad Version 3 - Progress Report - 2002-01 Report
...track is almost perfectly straight. Once the glue dried the flextrack is no longer flexible!...

P & C Railroad Version 3 - Progress Report - 2002-02 Report
...strength, of course, because there wasn't much glue surface. However, that did provide me with...

...the bridge spans. These did provide enough glue surface to provide plenty of support. From...

P & C Railroad Version 3 - Progress Report - 2001-05 Report
...scrape. The foam has a strip of glue which I exposed so that they remained...

P & C Railroad Version 3 - Progress Report - 2001-06 Report
...installed. This photo was taken when the glue was still drying. The river bottom board...

P & C Railroad Version 3 - Progress Report - 2001-07 Report
...edges of the river so that the glue being sprayed on the land wouldn't hurt...

P & C Railroad Version 4 - Progress Report - 2003-09 Report
...inches deep. Construction method is simple wood glue and screws. The fronts will be hidden...

P & C Railroad Version 4 - Progress Report - 2003-04 Report
...top panel. Everything was assembled using wood glue only. Here the first lighting cabinet is...

...first lighting cabinet is waiting for the glue to dry. And this is what it...

P & C Railroad Version 4 - Progress Report - 2003-07 Report
...the area that will be used to glue these sheets up to the overhead lighting...

P & C Railroad Version 4 - Progress Report - 2003-08 Report
...to the furring strips with yellow carpenters glue. A brad nailer held the panels in...

...held the panels in place while the glue dried while minimizing the amount of damage...

The PRR Chartiers Branch - Progress Report - 2008-11 Report
...location at the correct angle. Using wood glue, I glued each of the blocks in...

...the blocks in place. I decided to glue the blocks down so that they can...

...decide on a different track plan. The glue holds the blocks in place very well,...

...swift blow with a hammer and the glue or block will break away. Before permanently...

The PRR Chartiers Branch - Progress Report - 2008-12 Report
...replace the MDF sub-roadbed, because the Pliobond glue used to attach the roadbed foam kept...

The PRR Chartiers Branch - Progress Report - 2010-03 Report
...as a support piece against which to glue the cardboard strips, so that the backdrop...

The PRR Chartiers Branch - Progress Report - 2010-04 Report
...place. These were glued together with wood glue first. Next, I glued them in place,...

...strip to make it shorter or to glue another strip in to make it longer....

...layout for the hills. I used hot glue to glue the cardboard strips in place....

...the hills. I used hot glue to glue the cardboard strips in place. It takes...

...takes only a few seconds for each glue spot to dry and it goes remarkably...

The PRR Chartiers Branch - Progress Report - 2010-05 Report
...the whole area was dowsed in white glue thinned down with water (50/50) to try...

The PRR Chartiers Branch - Progress Report - 2010-08 Report
...down with a 50/50 mixture of white glue and water. The next day all the...

...The material goes on white like white glue, but after about 30 minutes it starts...

The PRR Chartiers Branch - Progress Report - 2010-10 Report
...in order. I then used Elmer's wood glue to glue each of them down to...

...I then used Elmer's wood glue to glue each of them down to the tops...

...had to use superglue, because the wood glue wouldn't hold them long enough and I...

...for the next board. I used wood glue to glue them in place. Next, I...

...next board. I used wood glue to glue them in place. Next, I took a...

The PRR Chartiers Branch - Progress Report - 2011-01 Report
...handful of N-scale people left over, I'd glue them in the scene right in front...

...used a good quantity of yellow carpenter's glue to glue them to the layout's scenery...

...good quantity of yellow carpenter's glue to glue them to the layout's scenery base. I...

...scenery base. I then added some more glue to represent the roots near the base....

The PRR Chartiers Branch - Progress Report - 2011-03 Report
...to do some scenery work, I may glue down some bushes, and maybe some trees....

The PRR Chartiers Branch - Progress Report - 2011-05 Report
...it down with Aleene's Fast Grab Tacky Glue. The Tortoise is directly glued to the...

...glued to the benchwork base. Five-minute epoxy glue could have been used as well, but...

The PRR Chartiers Branch - Progress Report - 2011-08 Report
...just loose. I have found Aleene's Tacky Glue as the only one to work reliably,...

...cured. I apply a dab of the glue to the knot on the back of...

...not too much. When the first knot's glue is dry, I place the wire over...

...pole. I then apply a drop of glue (using a toothpick) to each of the...

...carefully pull the line up to the glue. By the way, the wire goes in...

...between the two stacked insulators. When that glue has set, I trim the wire to...

The PRR Chartiers Branch - Progress Report - 2011-10 Report
...light pressure on the parts while the glue set. I did a similar thing for...

...is attached to that pulley, you can glue it to the main assembly. After the...

...it to the main assembly. After the glue set, I routed the chain by guiding...

...the crane to it using Eileen Tacky glue (the crane is top-heavy, so you have...

...top-heavy, so you have to have a glue that "grabs" the base right away). The...

The PRR Chartiers Branch - Progress Report - 2011-11 Report
...spray some water followed by thinned white glue to firmly glue everything down. I also...

...followed by thinned white glue to firmly glue everything down. I also started putting down...

...proceeding with the creek. I let the glue dry overnight. The next day I mixed...

...the hard-to-reach areas I didn't get enough glue down and so some of the vermiculite...

The PRR Chartiers Branch - Progress Report - 2011-12 Report
...made. I started off using Aleene's Tacky Glue, but got frustrated in that it takes...

...up with the idea of using a glue gun. I was afraid the hot glue...

...glue gun. I was afraid the hot glue would melt the foam, but it doesn't....

...me two nights because of the Aleene's glue's drying time. I wanted the lower roof...

...thought about buying paper brick sheets to glue to the buildings, but the amount of...

The PRR Chartiers Branch - Progress Report - 2012-11 Report
...that one while I was waiting on glue or paint to dry on this one....

...overnight, I applied a layer of white glue over it and sprinkled N-scale PRR ballast...

...the base of the platform with white glue and applied some additional bushes to better...

The PRR Chartiers Branch - Progress Report - 2013-01 Report
...I'll attempt to replace those with some glue and cover any visible seams with some...

The PRR Chartiers Branch - Progress Report - 2013-03 Report
...work very enjoyable and relaxing. Once the glue dries, I find it also rewarding to...

The PRR Chartiers Branch - Progress Report - 2013-04 Report
...plywood top of the module using wood glue. After that dried, I was able to...

...two pieces of MDF to which I glue some 150-grid sandpaper on the bottom. The...

...in a small puddle of melted hot glue. You only have to hold them for...

...them for a little while until the glue is set. I put the drop of...

...set. I put the drop of hot glue on wax paper, but that proved a...

...use for modeling purposes. However, the hot glue bottom allowed me to then use Aleene's...

...allowed me to then use Aleene's Tacky Glue to glue the bush to the scenery...

...to then use Aleene's Tacky Glue to glue the bush to the scenery base. The...

...bush to the scenery base. The hot glue blob will be visible, but that is...

...days. Superglue! I used thick superglue to glue the rails down to the ties. Much...

The PRR Chartiers Branch - Progress Report - 2013-05 Report
...battery-powered, S-CAB DCC . While waiting for glue to dry, paint to dry, and soldering...

The PRR Chartiers Branch - Progress Report - 2013-09 Report
...left side of the sheet, I will glue some blocks of plastic to the layout...

...the way. I used five-minute epoxy to glue the legs down onto the base of...

...that was dry, I used Aleen's Tacky Glue to glue the structure's flooring to the...

...dry, I used Aleen's Tacky Glue to glue the structure's flooring to the styrene base....

The PRR Chartiers Branch - Progress Report - 2013-11 Report
...being glued in place. I used white glue, which takes a while to cure, so...

...the ties, of course. After letting the glue dry overnight, I was happy with the...

...ties. Ties installed! I used Aleene's Tacky Glue so that I didn't have to wait...

...have to wait so long for the glue to dry. I had forgotten to take...

The PRR Chartiers Branch - Progress Report - 2013-12 Report
...are glued down (I used Aleene's Tacky glue). Then I started working on the main...

...is worth, so I decided to just glue the sheet styrene flat on the module...

...them in place. I used Aleene's Tacky glue to attach them to the tops of...

...glued the castings in place using hot glue. I also had a handful of pieces...

...used a brush to apply watered-down white glue over the ground goop surface, and then...

...Woodland Scenics' ground foam blend over the glue. This is just to have something "green"...

...did not notice the leftover strand of hot-glue draped over the rocks until after I...

The PRR Chartiers Branch - Progress Report - 2014-01 Report
...lots of superglue (the gel kind) to glue them all down. It all went well,...

...bit of a challenge. I kept the glue on the inside of the sidewalk, so...

...the ends, and then use Aleene's Tacky glue to form a ridge at the end....

...so the plaster could ooze out. The glue helped me build a nice dam. This...

...edges of the foamboard, using Aleene's Tacky glue. The next day, when I took this...

...cover the new ground surface with white glue, and then sprinkle some Woodland Scenics fine...

...layout, I carefully put some Aleene's Tacky Glue all around the bottom of the building,...

...I had made earlier. I let the glue set overnight. I could then take the...

...sure the trees stayed upright while the glue dried. To plant them, I poke a...

...bottom of the tree with Elmer's white glue, and then just plant the tree. Once...

...then just plant the tree. Once the glue is dry, the trees are in there...

The PRR Chartiers Branch - Progress Report - 2014-02 Report
...decided to just cover it with white glue and then sprinkle some more ballast. That...

...then carefully covered it with diluted white glue, trying not to disturb the coal load....

...the whole street area with diluted white glue, and then sprinkled the extremely fine paving...

...just liberally sprinkled it all over the glue. The next day, I vacuumed up all...

The PRR Chartiers Branch - Progress Report - 2014-06 Report
...them to the layout using Aleene's Tack Glue, so when it is time to work...

...section of the scenery base, and then glue a block of wood in place. I...

The PRR Chartiers Branch - Progress Report - 2008-09 Report
...Masonite boards so that there is more glue surface to which to glue the other...

...is more glue surface to which to glue the other smaller board. Next I glued...

...than my light bar! I decided to glue them to the light bar, so I...

...set of 3/4-inch plywood boards with epoxy glue and let them dry overnight. The clips...

...the lightbulb. The next step was to glue some more 1/4-inch strips for additional glue...

...glue some more 1/4-inch strips for additional glue surfaces. I also glued two small Masonite...

...to provide the clamping force while the glue sets. The vertical strips of plywood wrapped...

...panel against it. I needed some more glue surface along the edge of the front...

The PRR Chartiers Branch - Progress Report - 2008-10 Report
...discovered that they take days for the glue to dry, they are not entirely flat,...

Magazine Articles By Bob Walker
...tips on holding things together while the glue dries. Back to Simple Magazine:...

Magazine Articles By Carl Tuveson
...with spray paint, dipped them in white glue mixed with water, and sprinkled ground foam...

Magazine Articles By Dan Lewis
...how he hand-lays code 40 rail using glue. The Solano: Modeling a Railroad Car Ferry...

Magazine Articles By E.L. Moore
...and is accompanied by scale drawings. Stuckum Glue Works Magazine: Model Railroader 1977-10...

Magazine Articles By Jim Hediger
...to breathe new life into models. Handy glue applicator. Weathering a PRR GG1. Finding a...

Magazine Articles By Joseph Kreiss
...how to photocopy commercial containers and then glue them to foam core to simulate a...

Magazine Articles By Lou Sassi
...Celluclay, Vermiculite, flat latex paint, and white glue). The photo essay continues with ground cover,...

Magazine Articles By Mike Langford
...foamcore, poster board, and pushpins with some glue is all you need to build a...

Magazine Articles By Mike Rose
... Tools Description: Molecular bonder glue. Detailing an Apalachicola Northern, ex-East Camden &...

Magazine Articles By Pete Moffett
...narrow gauge track scale. Includes how to glue down track using Walthers Goo. Steel City...

Magazine Articles By Roger Holmes
...Cut a model airplane in half and glue it to the backboard. Got Milk Cars?...

Magazine Articles By Category: Airplanes
...Cut a model airplane in half and glue it to the backboard.

Magazine Articles By Category: Layouts - N - Medium
...how he hand-lays code 40 rail using glue. Michael Kuehn's Railroad Magazine: Model...

Magazine Articles By Category: MRR Tips & Tricks
...to breathe new life into models. Handy glue applicator. Weathering a PRR GG1. Finding a...

Magazine Articles By Category: Photography & Videography
...foamcore, poster board, and pushpins with some glue is all you need to build a...

Magazine Articles By Category: Scenery
...Celluclay, Vermiculite, flat latex paint, and white glue). The photo essay continues with ground cover,...

Magazine Articles By Category: Scenery - Trees, Shrubs, Bushes
...with spray paint, dipped them in white glue mixed with water, and sprinkled ground foam...

Magazine Articles By Category: Structures - Industrial
...how to photocopy commercial containers and then glue them to foam core to simulate a...

...Includes model photos and scale drawings. Stuckum Glue Works Magazine: Model Railroader 1977-10...

Magazine Articles By Category: Structures - Track-side Details
...narrow gauge track scale. Includes how to glue down track using Walthers Goo. More Structures...

Magazine Articles By Category: Tools
...tips on holding things together while the glue dries. Badger Airbrush Spray Booth Magazine:...

... Mike Rose Description: Molecular bonder glue. Deluxe Cutting Board Magazine: Model...

Model Railroader 1977-10 Articles
...shop, and car department with lunchroom. Stuckum Glue Works Page: 76 Author:...

Model Railroader 2005-11 Articles
...Celluclay, Vermiculite, flat latex paint, and white glue). The photo essay continues with ground cover,...

Model Railroader 2006-09 Articles
...to breathe new life into models. Handy glue applicator. Weathering a PRR GG1. Finding a...

Model Railroader 2010-04 Articles
...how to photocopy commercial containers and then glue them to foam core to simulate a...

N-Scale 1999-09/10 Articles
...foamcore, poster board, and pushpins with some glue is all you need to build a...

N-Scale 2002-07/08 Articles
...how he hand-lays code 40 rail using glue. Kirby Vincent's Module Layout Page: 66...

N-Scale 2002-11/12 Articles
... Tools Description: Molecular bonder glue. Preparing Structures for Interior Lighting Page:...

NASG Dispatch 2004-02 Articles
...with spray paint, dipped them in white glue mixed with water, and sprinkled ground foam...

NMRA Bulletin 2002-06 Articles
...narrow gauge track scale. Includes how to glue down track using Walthers Goo. Building 30'...

Railroad Model Craftsman 2002-10 Articles
...Cut a model airplane in half and glue it to the backboard.

Railroad Model Craftsman 2011-06 Articles
...tips on holding things together while the glue dries. Toronto's 2011 RPM Meet Page:...

Magazine Articles for HO Scale
...Celluclay, Vermiculite, flat latex paint, and white glue). The photo essay continues with ground cover,...

...narrow gauge track scale. Includes how to glue down track using Walthers Goo. Modeling Two...

Magazine Articles for N Scale
...Cut a model airplane in half and glue it to the backboard. Comme-n-tary: A Mountain...

...how he hand-lays code 40 rail using glue. Kato EMD SD80MAC and SD90/43MAC Magazine:...

Background Building #1
...I came back and used Aleene's Tacky Glue as a caulk to make sure no...

...came out well anyway. I painted the glue with which I filled the gap between...

...which were glued with Formula 560 canopy glue, just in case any of it was...

...above photo). All that remains is to glue in some black paper in the interior...

...slight pressure on the paper while the glue (Aleene's Tacky Glue) was drying.

...the paper while the glue (Aleene's Tacky Glue) was drying.

Bascule Bridge
...the pencil line. I used regular wood glue and my favorite glue dispenser - the...

...used regular wood glue and my favorite glue dispenser - the toothpick. I glued two...

...am using Testors Plastic Cement for the glue. The H-columns then rest against the strip...

...the width of the bridge track ties. Glue may be sufficient to hold the model...

...possible to fine-tune the braces. After the glue dried they were in there nice and...

...eventual position, I placed a drop of glue in their intersection to hold them together....

...their intersection to hold them together. This glue joint is not strong enough (neither in...

...left to do on this structure is glue the track and wooden walkway in between...

...plan on doing that with slow-setting epoxy glue because of the dissimilar materials, hence the...

Structures - Benches
...into the cast metal sides and no glue was necessary. The stand-in model we "hired"...

Canonsburg Steel & Iron Works
...below). The next thing I did was glue the two pieces of styrene together to...

...to hold them in place while the glue dried. I did the same thing with...

...them to the painted foundation using super glue. Next came the walls. I used Evergreen's...

...and to the vertical angles. While the glue dried I marked and cut the openings...

Canonsburg Milling
...the wall so that I had enough glue surface to attach the window frames. You...

...the piece in place while I applied glue to the various joints. The next skinny...

...simple. Just make sure to keep the glue away from the jig, otherwise they become...

...done. At first I was going to glue two strips of brick on the corners....

...backs of those using Formula '560' canopy glue. The photo below shows where I am...

...photo below shows where I am applying glue (very watered-down white glue) to the roof...

...I am applying glue (very watered-down white glue) to the roof tops. When I completed...

...container in the back. I let the glue dry overnight, and then turned the building...

...fit. A tiny bit of Aleene's Tacky glue along the back of the staircase was...

Canonsburg Passenger Station - Right Wall Construction
...I decided to cut a mosaic and glue the individual pieces to a sheet of...

Canonsburg Passenger Station - Bay Window Construction
...to form those. After thoroughly drying the glue, I went back with the back of...

...the shape I wanted. I could then glue the three brick wall pieces together and...

Deck Plate Girder Bridge - Deck Plate Girder Bridge
...offset from each other, I decided to glue some temporary strips on the bottom of...

...the two strips of styrene and then glue them in the center. The truth of...

Deck Plate Girder Bridge - Removable Deck Plate Girder Bridge
...the longer ties, and used superglue to glue them into the holes. I tried to...

Furniture Factory - Main Factory Building
...part in place to allow me to glue it in place with Krylon's "Crystal Clear...

...but dries clear. It acts as a glue. The danger with using Testors Plastic Cement...

...jig, and some careful manipulation while the glue was drying, making these sub-assemblies went surprisingly...

...installed the platform support posts with white glue. The next photo is a close-up of...

Furniture Factory - Lumber Shed
...with 2" by 12" boards. I didn't glue to them perfectly matched, but offset every...

...The metal rusted a bit into the glue. However, it left a nice weathered effect....

...the four interior walls upright while the glue sets. One of the weights was used...

...side walls are properly secured. I will glue one board against the 8x8 posts, one...

...board flat and in place while the glue sets (on the one side is a...

Furniture Factory - Diorama
...placed squares against the fence while the glue was drying to ensure that the fence...

...My experience has taught me that the glue mixture will tend to go into small...

...of paper around the structures to prevent glue from going on them as well. The...

Lumber Storage Shed
...were perpendicular to each other as the glue was drying. I then cut and glued...

...roof angles that I wanted. Once the glue was set, the boards stayed together nicely....

...careful not to have any excess wood glue accidentally connect the pieces to the wall)....

...those installed (I used five-minute epoxy to glue those to the structure). I then carefully...

...a thin layer of Aleene's original tacky glue to the styrene, and then carefully pressed...

...styrene. After that was done and the glue had dried, I sprayed Testors Dullcote over...

O'Brien Steel Construction Co. - Construction
...easy to interconnect. I used Elmers white glue to assemble the kit. Due to the...

...need to be held straight while the glue sets. The next photo shows the lose...

...those two wall pieces up while the glue set required some creative use of weights...

...the whole thing lose from the glass (glue oozes out a bit). This is not...

...sure the subfloor stays flat while the glue dries. This was my set-up for gluing...

...to hold it in place while the glue set. Make sure to push the small...

...of challenge to hold together while the glue set, so, as you can see in...

...tricky to install. There are only four glue points. Patience is required here. I just...

...that are left open are for the glue surfaces needed to attach the door's offsets....

...in the window opening, glued with white glue. The back of the pane is about...

...it, I re-enforced the joints with white glue. The outside wall (right hand side) was...

...wall to stay in place while the glue set. I used weights to put counter-force...

...from the roof's edge. Weights and a glue bottle were used as the opposing force...

...It worked, though. When the larger roof's glue was dry, I glued the top, canopy...

...back and filled the seam with white glue all the way around, which is shown...

...be able to make out the white glue). I added the extra trim pieces on...

O'Brien Steel Construction Co. - Detailing
...in my supplies drawer. I used Canopy glue to apply them (the glue is drying...

...used Canopy glue to apply them (the glue is drying in this next photo). The...

...into the structure. Then, using yellow carpenter's glue and some creative clamping, I glued the...

...the structure and used 5-minute epoxy to glue the lamp fixture to the structure. The...

...the interior using Aleene's Fast Grab Tacky Glue, because superglue just didn't work. I also...

...fit inside the structure. I then sprayed glue on the board and carefully glued the...

...with the underside of the roof. The glue I used was Aleene's Fast Grab Tacky...

...I used was Aleene's Fast Grab Tacky Glue. It held the gutters in place with...

...want to risk a big glob of glue on the walls. Note that you can...

...(I covered the plywood with full-strength white glue first before sprinkling on the scenery material)....

Oil Pump Jack
...them, so as to not get any glue on joints that are supposed be movable....

..."under ground". I used 5-minute epoxy to glue the model to the diorama base. On...

Structures - Outhouse
...it is hard to hold while the glue is setting, I waited with pressing the...

...pressing the LED in place until the glue was just starting to set. You only...

...bottom of the structure (using 5-minute epoxy glue), and then soldered the magnet wires to...

Plate Girder Bridge
...the strips in one hand, while applying glue with the other hand. I prefer Testor's...

...the corners and hold them to apply glue and to give them time to dry....

Raiser Sharp Barber Shop
...sand these wall sections, too. To actually glue the walls together, I placed them into...

...Later on I went back and put glue into the entire inside corner. I glued...

...the whole building is square. I put glue on the inside corners again, and then...

...then used Zip Kicker to have the glue cure right away, since the rear wall...

...building. I covered the roof with white glue, and then sprinkled on Arizona Rock &...

...glued to the building using Aleene's Tacky Glue. I decided to make an interior wall...

Structures - Residence
...provided for the walls (using Eileen's Tacky Glue) and cut the walls to shape, including...

Smitty's Rod-n-Reel
...other, making sure to not have any glue drip down onto the floor (the floor...

...held to the styrene base with the glue with which I painted that base. This...

Trestle Bridge Diorama
...applying board after board waiting for the glue to dry. The photo below shows a...

...made out of something to which wood glue doesn't stick. A jig made out of...

...to the vertical posts using yellow carpenter's glue (a very thin amount applied with a...

...hold the whole thing together while the glue dried. The support boards are the ones...

Trestle Extension
...left the parts alone to allow the glue to dry. Once the glue dried, it...

...allow the glue to dry. Once the glue dried, it was a simple matter of...

...was careful not to use too much glue to avoid having it ooze out between...

...weights to hold them down while the glue set, as seen in the photo below....

...inside edge of the module using wood glue. The metal weights hold it in place...

...weights hold it in place while the glue sets. The next step was to assemble...

...cut the parts, and then started to glue the stringers and caps together. Like with...

...cap/stringer assembly to the abutment using wood glue, and a couple of lightweight plastic clothespins....

...weight holding the board down while the glue is drying. When the glue was dry,...

...while the glue is drying. When the glue was dry, I glued another board on...

Structures - N-scale Turntable - Bridge
...light, it also protects the wood from glue. The original Diamond Scale documentation came with...

...bridge, which I had covered with white glue. After about 30 minutes I removed the...

...to the bridge. I used 5-minute epoxy glue, applied to the bottom of the rail...

...weights holds the rail down while the glue dries. This is what the bridge looks...

...what the bridge looks like after the glue has dried. The next step is to...

Scratch-built Turntable - Base
...& sealant. This is a nice general-purpose glue that dries clear, but shiny. When I...

...already sanded away some of the excess glue that squeezed out. Five-minute epoxy would work...

...and spread a thin layer of the glue on the pit floor. The rail was...

...place by some metal weights while the glue dries. I left a gap between the...

...made sure it turned smoothly while the glue was drying. It is finally time to...

...straight to the bridge shaft. After the glue dried I installed the motor assembly via...

Scratch-built Turntable - Bridge Construction
...light, it also protects the wood from glue. The original Diamond Scale documentation came with...

...bridge, which I had covered with white glue. After about 30 minutes I removed the...

...to the bridge. I used 5-minute epoxy glue, applied to the bottom of the rail...

...weights holds the rail down while the glue dries. This is what the bridge looks...

...what the bridge looks like after the glue has dried. The next step is to...

Scratch-built Turntable - Bridge Detailing
...used both Testors Plastic Cement and Super Glue to glue these strips to the painted...

...Testors Plastic Cement and Super Glue to glue these strips to the painted MDF sides...

...backdrop. Next, I used 5-minute epoxy to glue the four walls together. From a small...

...could fit around him. Then I could glue the control cab over him. His right...

...glued to the wooden base with super glue. I had originally glued the door to...

...I decided to snap it out and glue it in the open position. That way...

glue-up
Equipment - PRR H21a Hopper - Construction: Frame
...more challenging). The way I did my glue-up is I placed one end sill over...

Equipment - PRR RS-1 Road Switcher - Construction: Adding Details
...is how I found out that the glue-up solution mentioned above was quite strong, but...

The PRR Chartiers Branch - Progress Report - 2008-07 Report
...shown below. I generally don't do any glue-up work on my table saw, but these...

glued
Animation - Experimental Doors
...Three pieces of left-over MDF board were glued together to make the stand. A strip...

...stand. A strip of flex track was glued to the top. The objective is to...

...In the photo the doors are already glued to the rods using 5-minute epoxy. The...

...small square pieces of styrene will be glued to the top of the rods to...

...vertically. This photo shows the two stops glued to the top of the rods. I...

...drill bit. In retrospect I should have glued those stops closer to the frame board....

...of the two pieces of styrene I glued to the bottoms of the rods. I...

...the two pieces of styrene that were glued to the bottom of the door rods....

...between that piece and the two pieces glued to the bottom of the door rods....

S-scale Vehicles - 1950 Oldsmobile 88
...from being seen. I have not yet glued the wire to the body, which will...

Electronics Projects - Helix Elevator Lights
...located. The basswood is going to be glued to the sides of the luan board...

...The photo shows the LED strip being glued in place (I used yellow carpenters glue)....

...vertical posts of the helix. They are glued with Liquid Nails for Foam (I had...

...It actually made installation easier, because I glued the cable to the helix structure using...

Electronics Projects - LEDs
...Here's the cab roof before assembly. I glued the SMD LED to the roof after...

...LEDs on structures. This one shows one glued inside the lamp fixture of the an...

Electronics Projects - Sound Module
...well... Using Liquid Nails for Projects, I glued the rounded cap tube to the back...

...assembly. There is a two-inch straight tube glued on top of the speaker itself. This...

LED Lighting
...made of wood. Using five-minute epoxy, I glued the strip to the board, after removing...

Hand-building Crossings - Building a Crossing
...to length. This photo shows the ties glued in place. I ballast before I start...

Hand-laying Track - 1. Preparing and Installing Ties
...of left-over MDF boards. Some sandpaper was glued to the bottom of the tool. By...

...prefer to stain them after I have glued the ties, because it makes the job...

Hand-laying Track - 2. Preparing and Applying Ballast
...enough water, the walnut shell pieces become glued together and can be difficult to separate....

...to remove any ballast that didn't get glued down. The matte medium takes about an...

Hand-laying Track - 6. Track Details
...normal viewing angles. Joint bars would be glued every 39 feet or so of track....

Hand-building Turnouts - Code 40 N-scale Turnout
...also fed by its own wire and glued in place. I had been very...

...width as the other wooden ties and glued the point rails to that piece of...

Hand-building Turnouts - Code 55 N-scale Turnout
...used above. All the wooden ties are glued to the bottom of the rails using...

Painting - Airbrush Setup
...to a block of wood that I glued to the underside of the plywood, so...

Painting - Paint Caddy
...boards. After that the 1/4" board is glued to it. After the glue has dried,...

General Rolling Stock - Coal Load
...load out if a matching magnet is glued to the underside of the load. I...

General Rolling Stock - Coupler Gauge
...some extra, flat surface space. Next, I glued the two strips of styrene to the...

...two one-inch strips of 0.040 styrene and glued them to the base using superglue. The...

...adhere to a minimum flange height. I glued the styrene pieces the same distance apart...

...next photo shows one of those pieces glued down, centered in between the two strips...

General Rolling Stock - Load of Crates
...scale 1x5 boards, cut to size and glued with yellow carpenter's glue. Crates come in...

...all different sizes, shapes, and configurations. I glued a set of boards along the top...

General Rolling Stock - Painting Wheels
...is nothing but a piece of rail glued to a piece of wood. The parts...

General Rolling Stock - Power Generator Load
...I was happy with the parts, I glued the radiator to the bottom piece. There...

...wood tie-downs and the cardboard bottom were glued to each other using white glue. I...

...them in place. The loads are not glued to the car. I don't know if...

General Rolling Stock - Steel Beam Load
...of the beams. The load is not glued to the gondola so that it can...

General Rolling Stock - Vertical Engine Load
...up nicely. The carrier frame parts were glued to the paper/cardboard platform using yellow wood...

...frames' holes in my scrapbox, which I glued in place with superglue, and then painted...

N-scale Equipment - Arnold S2 - Pilot Conversion
...itself. The pilots have been installed and glued to the metal walkway using 5-minute epoxy....

N-scale Equipment - Bowser Hoppers - Coal Load
...of styrene installed in the car. I glued it in place with Testors Plastic Cement,...

N-scale Equipment - Con-Cor 4-8-4 - DCC Conversion
...I noticed that there is a weight glued to the underside of the top of...

...the body. It looks like it is glued in place with some rubber cement like...

N-scale Equipment - Kato E8 - Coupler Conversion
...on hand at the time) and super glued them to the metal frame. Then it...

...coupler and its screw. Previously I had glued the coupler to a styrene shim, but...

N-scale Equipment - Life-Like SW9 - Coupler Conversion
...Micro-Trains N-scale couplers installed. The couplers were glued in place. With some gentle prodding using...

N-scale Equipment - Life-Like SW9 - Improving Pickup
...center of the shell these strips were glued using superglue. The brass strips were cut...

...make contact with the trucks' wipers. The glued sections have another lip bent down so...

N-scale Equipment - Micro-Trains Box Car X26 - Adding Weight
...so a styrene piece needed to be glued over it to keep the shot in...

...Of course, the shot has to be glued in place. At first I tried white...

N-scale Equipment - Model Power 4-6-2 - Coupler Conversion
...and fitted a piece of styrene and glued it in that indent with Testor's plastic...

N-scale Equipment - Model Power 4-6-2 - DCC Conversion
...the joints with liquid electrical tape, and glued the decoder to the tender frame with...

N-scale Equipment - Rivarossi 2-8-8-2 - DCC Conversion
...strips of 0.040" thick styrene that I glued together and placed in between the two...

S-scale Couplers - Sergent Couplers - New Design S
...cured, or else the ball could become glued internally. Installation The Sergent couplers do...

Scenery - Abutments Casts
...the long side panels. The master was glued to the bottom of the box using...

Scenery - Foreground Trees
...The ones with the paper can be glued together (as I'll describe below), which makes...

Scenery - Generic Background Trees
...off pieces of floral wire are then glued back into the main trunk to give...

...foam (and also various colors) that are glued to the armature using the same 3M...

Scenery - Scenery Base
...strips are woven together. The strips are glued to each other and to the benchwork...

...newspaper in strips of arbitrary sizes and glued them in place. I don't worry about...

...This photo shows a layer of newspaper glued in place on my last N-scale layout....

Scenery - Streets
...recent rain. Next, I cut, shaped, and glued scale 9"x6" boards that provide the car...

Scenery - Telegraph/Telephone Poles
...poles (again, the top one is not glued yet). Be sure not to apply too...

...applied glue to the top groove and glued that piece of strip wood in place,...

...black nylon wiring . The wire is glued to the "insulators" using Eileen's Tacky Glue...

Storage - Strip Storage
...the styrene strips (or else they get glued to the bottom of the tube!). I...

...the strips to the right length and glued them on to the drawer bottom. No...

...needed for this solution. The boards are glued 3/4" on-center. Leftover pieces of the boards...

...on-center. Leftover pieces of the boards are glued together to form another slot. Very little...

Tools - Panel Cutting Sled
...oak glider cut and the fence securely glued to the plywood, it was time to...

...to the bottom of the jig, I glued the glider strip to the bottom of...

Tools - Panel Support
...leftover L-girders (a thin strip of wood glued at a 90-degree angle to a wider...

Tools - Router Table
...This is basically two sheets of MDF glued together, and then covered with a sheet...

...shows the two sheets of MDF being glued together. The top measures a generous 35-1/2"...

...with two coats before they were actually glued together. The total thickness of the table...

...It started off as just four boards glued together. Next, I laminated some Oak wood...

...wood strips into 1 square boards and glued to those flush with the top edge...

...a false floor. This is shown being glued here. I made the side panels by...

Tools - Work Bench LED Lighting
...marked where the strips were to be glued, and I applied Aleene's Tacky glue to...

...adhesive backing, and applied it to the glued surface. I then put some metal weights...

...of pieces of left-over balsa wood. I glued two 12-inch wood dowels to them, which...

...the top of the wooden dowels and glued a piece of brass tubing into it...

...the styrene, and the whole thing was glued with lots of 5-minute epoxy. Here's a...

Tortoise Installation Ideas - Sideways Installation
...over-exposed, but it shows the assembly being glued to the layout base. Since this is...

...the location. I drilled a hole and glued a piece of music wire in the...

...the Tortoise. The piece of music wire glued into the wooden block needs to be...

Custom Track Solutions - Helix
...laying track. Here a half-circle is being glued to a 12-inch straight section with a...

...is a close-up of the track being glued with Liquid Nails. I used a caulk...

...up the sub-roadbed plywood that is being glued. While the glue was drying, I started...

Custom Track Solutions - Pivot Table
...area. This photo shows the flextrack being glued to the piece of Masonite board. The...

...pivot table. The two parts are being glued together using Liquid Nails for Foamboard. Before...

...wires through it. The metal tube was glued in place using superglue. In the next...

Trackwork - Roadbed
...cut a piece of foam off and glued it (per the instructions) to a left-over...

...method. I will now use ceiling tiles glued to the MDF sub-roadbed. My message...

...the MDF sub-roadbed onto my layout, I glued the ceiling tiles onto the MDF using...

...in this photo. For experimentation, I glued a piece of scrap ceiling tile to...

...several full-size, painted, but un-trimmed ceiling tiles glued to the foam tops of the modules....

Trackwork - Track Inspection Car
...I then assembled the Kadee couplers and glued them to the plexiglass car using 5-minute...

Woodworking - Control Panels
...print-out to dry for a while, I glued it to a sheet of 1/8" Masonite...

...19 inches), so the control panel was glued to a larger sheet of Masonite hardboard...

Woodworking - Foldable Workbench
...to the bottom of the workbench. I glued a scrap piece of solid wood to...

Woodworking - Layout Cabinets
...the back of the drawer panel, and glued two strips of Oak hardwood as drawer...

...out of strips of plywood. These were glued and reinforced with screws from the outside....

...the cabinet prevents the front from being glued to the rest of the cabinet. The...

...Masonite hardboard with some 3/4" plywood sides glued to its top. The Masonite board slides...

...of my drawers have 1/4" plywood dividers glued in them so that I can separate...

Woodworking - Work Table
...the table saw also. The trim was glued to the plywood, and then reinforced with...

Equipment - PRR FA-2/FB-2 Cab Units - DCC Conversion
...some force to remove. The LED is glued to the shell using hot glue. If...

Equipment - PRR FA-2/FB-2 Cab Units - S-CAB
...it needs to be moveable. I then glued the battery support shelf to the two...

...to hold the board upright. I then glued it onto the frame using five-minute epoxy....

...of flat styrene across them. I then glued it to the frame using five-minute epoxy....

Equipment - PRR FM Flat Car - Coupler Conversion
...lead shot balls that are very firmly glued in place, I decided to just make...

Equipment - PRR FM Flat Car - Construction: Frame
...were 9'3" wide). The end pieces are glued in between the two long side pieces....

...starting with a 12"x4" styrene strip. I glued them centered, and at such a spacing...

...On the inside of the ends, I glued a piece of 8" channel strip styrene...

...of the car. Next, I cut and glued some strips on top of those 8"...

...aren't in the correct spot. I first glued some 4"x8" strips under the length-running strips...

...parts later on). With those dry, I glued a 12" wide channel strip in between...

...therefore used several tubes of superglue and glued a bunch of lead shot in the...

Equipment - PRR FM Flat Car - Construction: Wheels and Couplers
...to build up the bolster area. I glued a 20"x24" piece of 0.040" styrene on...

...you can see that I have already glued the center section of that part and...

...you see in the background. Next, I glued the "flaps" of the bolster down. After...

...put a mounting screw into, I just glued the coupler box onto the car. If...

Equipment - PRR FM Flat Car - Construction: Stake Pockets
...scale 1x4 strips. The 1x4 strips are glued on top of the 1x6 on their...

Equipment - PRR FM Flat Car - Construction: Exterior Details
...1"x10" pieces of styrene that I carefully glued, two separate pieces for each corner. I...

...off using the NWLS Chopper II, and glued it to the car. I first used...

Equipment - PRR FM Flat Car - Construction: Decking
...against the two boards that were already glued in place by the brake wheel, and...

Equipment - PRR GLa Hopper - Construction: Frame
...used a 2"x10" strip, to which I glued two strips of 1"x3" styrene (as shown...

...and filed the pieces to length and glued them to the underside of the plate...

...the end sill with pencil, and then glued them accordingly. The important thing to note...

...that is 8 inches tall, which I glued to the bottom of the center sill....

...that before I did this, I had glued a block of styrene in between the...

...some 10-inch wide, 1-inch thick styrene and glued those to the tops of the 20-inch...

...away from the end sill. Next, I glued the strips to the underside of the...

Equipment - PRR H21a Hopper - Construction: Frame
...I should have done that before I glued two 2"x4" strips of styrene to the...

...long (and 16" wide). These were then glued in the gaps, precisely centered and flush...

...are perpendicular to the sill. Next I glued 2"x2" strips to the underside of the...

...strips are 2"x8" and two 2"x4" pieces, glued together to form a channel that is...

...sill. After careful measuring and marking, I glued the center spacers on top of the...

...the center. The square tubes were then glued up against the center spacer. In the...

...a 12" strip cut to 8'10" length, glued on top of the assembly. Note that...

...the rear panels are finished, they are glued to the third side (opposite the front...

...10" wide and 43" long. They are glued to the fourth side, against the lip...

...switched to the other side sill and glued each of its end sill joints. Finally,...

...joints. Finally, while holding everything square, I glued the end sills to the center sill....

...#264). Because of the fact that I glued the assembly together, they are a bit...

...second piece cut and ready to be glued in. You have to work at it...

...sills and letting it dry, I then glued the sill to the center sill, making...

...while I still had full access, I glued in lead shot into the center sill...

...given the magazine article mentioned above, I glued them down to the top of the...

...of the piping. The brake parts were glued to small pieces of Evergreen "channel" strips....

...so "close enough" is good enough. I glued a piece of wire between them, one...

Equipment - PRR H21a Hopper - Construction: Body
...distinctive braces. I used 1x6 strips and glued them to the appropriate locations, making sure...

...of the braces to length. Next, I glued 1x3 strips on top of the 1x6...

...up out of 2x4 strips. I first glued a strip on the end of the...

...side sill of the frame. Finally, I glued a full-length piece of 2x4 to the...

...filler piece. That last piece was just glued when I took the photo. I used...

...used for attaching grab irons. I then glued a 1"x4" strip on top of the...

...corner posts. A 1"x4" strip was then glued to the back of that strip and...

...Two strips of 4" square angles were glued under the sloped sheets. Two issues here:...

...when I build the next model. I glued two sets of 4" square angle brackets...

Equipment - PRR H21a Hopper - Construction: Wheels and Couplers
...coupler, cut it to length, and then glued the brass spring mechanism and the brass...

...This was placed over the tube and glued to the inside wall of the center...

Equipment - PRR H21a Hopper - Construction: Bay Doors
...the long piece of the door was glued in place by eye-balling it to line...

Equipment - PRR H21a Hopper - Construction: Interior
...interior will be hidden later on. I glued the dividers in place with 5-minute epoxy....

...(Evergreen Scale Models part #291). I first glued two of these angles back-to-back, and then...

...did another set like that. Then I glued the two sets back-to-back to form the...

Equipment - PRR H21a Hopper - Construction: Exterior
...one of the end pieces shaped and glued in place in the photo below. It...

...and 18" tall. I then cut and glued the top cover on top of the...

Equipment - B&O M53 Box Car - Construction: Body
...just inserted to fit; it is not glued yet, because details need to be added...

Equipment - B&O M53 Box Car - Construction: Underbody
...pieces of material that are to be glued into the slots in the centersill. The...

...The next photo shows all these pieces glued in place and filed to match the...

...was perfectly straight when the centersill was glued in place. The next photo shows a...

...nearest the part. The first one is glued in place in the next photo. I...

...cast on them. These need to be glued across the centersill on the cross-bearer. There...

...The ends of the part will be glued later. Since I used 5-minute epoxy I...

...was able to remove them. I then glued the L-shaped parts you see here and...

...installation of the brake levers, and the glued the grab irons over them. They were...

...decided to just let it go and glued the wires directly to the brake levers....

...then superglued those to the underframe, and glued the reservoir in place after that had...

...0.020" styrene upon which the part is glued. I then glued the wire between the...

...which the part is glued. I then glued the wire between the valve and the...

...placed the boards on top of the glued surface. I then placed some metal weights...

Equipment - B&O M53 Box Car - Construction: Adding Details
...don't need it later on! Next, I glued the two parts shown in the photo...

...the photo above into their location. I glued the center location of the wire first,...

...the wire to the right length and glued the ends in place. Same shot from...

...(I think it was scale 2x10) and glued them to a piece of clear styrene...

...next photo is the strip of rivets glued horizontally across the car's ends. Both ends...

...the chain straight and manageable. After I glued the chain in place, I also cut...

...chain in place, I also cut and glued in place a piece of wire to...

...pieces of styrene that are to be glued to the top of the ladders and...

Equipment - B&O M53 Box Car - Construction: Painting
...This photo also shows the slack adjuster glued into place. Careful studying of the photos...

...a piece of brass wire that was glued between the two parts. I also decided...

...bottom of the center sill. Nothing is glued down. The coupler goes in next. I...

Equipment - B&O M53 Box Car - Construction: Conclusion
...open and one door closed. Both were glued in with superglue at each of the...

Equipment - PRR N5c Cabin Car - Construction: Underbody
...was placed according to their photo. I glued a short piece of 0.015" brass wire...

...line to the (unnamed) part. Next, I glued (all using superglue) the other two parts...

Equipment - PRR N5c Cabin Car - Construction: Wheels and Couplers
...being bent out of shape. Next, I glued the brass wall to the end of...

...rest of the wall part can be glued. I also put a dab of glue...

...the idea. Because the grab bars were glued through the holes in the brass end...

...so that the styrene pieces could be glued flush to the back of the brass...

Equipment - PRR N5c Cabin Car - Construction: Interior
...painting these small parts by hand, I glued them to a left over piece of...

...body, and the various cushions and bunks glued in place. Although not mentioned in the...

Equipment - PRR N5c Cabin Car - Construction: Completion
...to fit the window openings and then glued them in place using Formula 560 "Canopy...

...Glue". This photo shows two pieces being glued to the side of the roof. External...

Equipment - PRR NW2 Switcher - Sergent Couplers
...plastic filler strip that I had already glued to the body (from when I installed...

...around the coupler. These pieces were also glued to the frame using five-minute epoxy for...

...having to resort to custom filing. I glued these to the steps assembly using styrene...

...of swing space. It does. Next, I glued a 2x6 strip to the bottom of...

Equipment - PRR NW2 Switcher - S-CAB
...stick out above the styrene, so I glued a second piece of styrene on top...

...cab has been removed. The weight is glued to the body and not removable without...

...from the brass strips that I had glued under the shell's exhaust stacks (as shown...

Equipment - PRR RS-1 Road Switcher - Construction: Completion
...the back of the LED. Next, I glued the LED and its wires to the...

...edge of his seat. Both figures were glued down using 5-minute epoxy. With the interior...

..."dangling" parts from the wipers and then glued them directly to the glass in the...

...Their height matches the wall section I glued, shown above. My focus now was on...

...web site also). I then very carefully glued the speaker to the styrene using 5-minute...

...two stands and the vertical wall, and glued the speaker face to them. I then...

Equipment - PRR RS-1 Road Switcher - S-CAB
...I cut a strip of that and glued it to the bottom of the frame....

...of the body. I then cut and glued two pieces of styrene (all 0.040" thick),...

...0.040" thick), one for each side, and glued it to the shelf. When dry, I...

Equipment - PRR RS-1 Road Switcher - Construction: Body
...would have taken the photo again. I glued two wall sections together. The side walls...

...the pieces are even. The walls were glued together with superglue. I then glued the...

...were glued together with superglue. I then glued the other end wall to the assembly,...

...the lift rings only need to be glued in there, and having the hole drilled...

...shows the part installed, but not yet glued down. The thing to remember about assembling...

...boards. The lip on one part is glued to the bottom of the next part....

...they were of equal length. I then glued the short running board to the long...

...two halves of the running boards are glued together, they must be 0.040" skinnier than...

...be the exact correct width. It then glued the two halves together using 5-minute epoxy...

...plate of the pilots can then be glued to the other side of the steps....

...the same plane, because that will be glued to the underside of the running boards...

Equipment - PRR RS-1 Road Switcher - Construction: Interior
...figures are just posing; they are not glued in their seats yet. I need to...

...a 1/8" drill bit. The parts were glued in place with superglue. By the way,...

...install the brake wheel later on. I glued the two interior halves into the cab...

...cab wall section on each side. I glued the styrene floor on top of that....

Equipment - PRR RS-1 Road Switcher - Construction: Body Assembly
...photo shows the cab signal equipment box glued to the body using 5-minute epoxy. The...

Equipment - PRR RS-1 Road Switcher - Construction: Chassis
...this close-up detail. Using 5-minute epoxy, I glued each stretcher to a sideframe, in the...

...had plenty of time to set, I glued two of these sub-assemblies together to make...

...of the girder, because that will be glued to the underside of the chassis later...

Equipment - PRR RS-1 Road Switcher - Construction: Adding Details
...part in the back, after I had glued the kit part first (to get them...

...hole using a #57 drill bit, and glued it in place with superglue. Next, I...

...tubing off using the NWSL Chopper. I glued, using styrene glue, those pieces to a...

...Railroad Museum showing its poling pockets. I glued the smoke stack with 5-minute epoxy in...

...small piece of brass wire that was glued on afterwards. To determine the right location...

...the reason for the piece of stripwood glued near the edge of the plywood). I...

...angles about 4 scale inches long and glued them against the stanchions and the sides...

...the handrails while the stanchions were already glued to the engine. This photo shows the...

...on the back (where they will be glued to the side of the walkway), yet...

...too thick to make the handrail be glued to the inside of the cab wall....

...a 1/2" piece of foam that I glued to a piece of Masonite board so...

...to be made for that one. I glued the handrail wires using superglue first, as...

...placed on the cab; it won't get glued down until the very end of the...

Equipment - PRR X29 Box Car - Kit Construction
...a close-up photo of the walkway being glued to the roof. The key here is...

...let it all dry. When dry, I glued the lateral (shorter) walkway sections to the...

...to add some weight, I would have glued some lead shot in between the center...

...However, that was not needed, so I glued the underframe to the floor board. Be...

...these rectangular blocks were it, and then glued them in place, with their open face...

...the next day I remembered my wooden block-with-sandpaper-glued-to-it that I use for evening-out ties after...

...a tiny piece of strip styrene and glued it in between. In the photo I...

...on, I realized that I should have glued the ladders up against the body. That...

Equipment - PRR X37 Box Car - Construction
...go onto the underframe, and so I glued the underframe to the car body. I...

...Later on when all the parts were glued in place, I was able to line...

...one hole for it. So, I first glued the brake reservoir part to the body...

...the body in with superglue. Then I glued the main brake rigging in. The bottom...

...The brake wheel housing needs to be glued in place before the platform is installed....

...my models for local train shows, I glued mine down. I used 5-minute epoxy. I...

Equipment - PRR X37 Box Car - Construction: Painting
...all back in place (the styrene was glued to the coupler draft box with superglue...

Bear Creek & Eastern - Progress Report - 2006-02 Report
...roadbed consists of staggered strips of material glued together to form a permanently set sub-roadbed....

...one is always the most difficult. I glued the two pieces of the wood together,...

...together, and after they had dried, I glued the leg to the bottom of the...

...were Kappler Mill & Lumber standard ties glued to the sub-roadbed using diluted white glue....

Bear Creek & Eastern - Progress Report - 2006-03 Report
...layout's backdrop and front fascia panels were glued. In this next photo the center section's...

...article on this web site. I glued the turntable to the roadbed, so they...

Bear Creek & Eastern - Progress Report - 2006-07 Report
...them). I then broke them up and glued them in place with a Liquid Nails...

...adhesive. This next photo shows some castings glued to the base. Next, I stained and...

Bear Creek & Eastern - Progress Report - 2006-08 Report
...board. This method uses blocks of wood glued in between to connect the two strips...

...finished sub-roadbed. Some Midwest cork roadbed was glued directly to the spline. And to the...

...the spline. And to the cork I glued the ties. This overall photo shows where...

Bear Creek & Eastern - Progress Report - 2007-02 Report
...dress the layout up a bit. I glued some Masonite board along the two visible...

Bear Creek & Eastern - Progress Report - 2007-06 Report
...OK, back to the scenery shell. I glued newspaper over the cardboard webbing, and I...

Bear Creek & Eastern - Progress Report - 2008-01 Report
...version of the L-girder benchwork method. I glued some 3/4" plywood strips to the backdrop...

...scenic curves on the top, and also glued 3/4" strips of plywood to its back....

Bear Creek & Eastern - Progress Report - 2008-02 Report
...the plywood, installed a supporting block, and glued the Masonite spline in place. This guarantees...

...then cut some small plywood blocks and glued them to the outside Masonite strip, and...

...them to the outside Masonite strip, and glued the center strip to them. This, too,...

Bear Creek & Eastern - Progress Report - 2008-03 Report
...The ties for the curved turnout are glued in place now too. ( to next...

Crystal Creek Module - Progress Report - 2005-01 Report
...In this photo the cork is being glued to the module's top, and various books...

...one bridge area I cut out, I glued some brass tubes that I cut to...

Crystal Creek Module - Progress Report - 2005-02 Report
...Concrete paint. After that was dry, I glued the bridge to the module using 5-minute...

Crystal Creek Module - Progress Report - 2005-06 Report
...The first piece of rail has been glued to the ties (I used 5-minute epoxy...

...piece of rail before the rail is glued to the layout. ( to next month's...

Crystal Creek Module - Progress Report - 2005-08 Report
...to standard wall-warts. The blocks are now glued to the under side of the module....

P & C Railroad Version 2 - Progress Report - 2000-11 Report
...portal I cast last month has been glued in place, and additional plaster has been...

P & C Railroad Version 2 - Progress Report - 2000-04 Report
...progress. I put down the track (all glued down), and then started this layer-cake top...

P & C Railroad Version 2 - Progress Report - 2000-08 Report
...layers of foam insulation board that were glued together, and the whole thing is removable,...

...to hide the seam. The bushes are glued to the layer that holds the track....

...have cast a few of them and glued them to the front edge of Bears...

P & C Railroad Version 2 - Progress Report - 2000-09 Report
...the mountain. All the foam has been glued down, painted, and has scenery applied. Again,...

P & C Railroad Version 3 - Progress Report - 2001-10 Report
...large river. After the cardboard strips were glued in place, I then applied the plaster...

P & C Railroad Version 3 - Progress Report - 2001-11 Report
...harbor scene. It looked good, so I glued and painted three wall sections together. The...

P & C Railroad Version 3 - Progress Report - 2001-12 Report
...to content with. The Masonite board was glued to the plywood. I have scratchbuilt a...

...some sections of wood dowels, and then glued them onto the water surface. And now...

...These need to be cut, sanded, and glued into place along the water/land border. To...

...be all worth it. The dowels are glued into place with yellow carpenter's glue applied...

P & C Railroad Version 3 - Progress Report - 2002-01 Report
...After cutting the track to size I glued the guard rail to the ties using...

P & C Railroad Version 3 - Progress Report - 2002-02 Report
...be accommodated. First the bridge spans were glued to the abutments using Testors plastic cement....

P & C Railroad Version 3 - Progress Report - 2002-03 Report
... 03/09/2002 03/09/2002 I glued some background photos I had bought to...

P & C Railroad Version 3 - Progress Report - 2002-08 Report
...concept. Before doing the track work, I glued down a large sheet of cork. It...

P & C Railroad Version 3 - Progress Report - 2003-01 Report
...main yard tracks have been installed (i.e. glued to the cork). There is a total...

P & C Railroad Version 3 - Progress Report - 2000-12 Report
...strong. The L-girder is then screwed (not glued) to the short vertical 2x2 boards. Our...

P & C Railroad Version 3 - Progress Report - 2001-03 Report
...area. Two sections of plywood sub-roadbed were glued together with a simple splice, as is...

P & C Railroad Version 3 - Progress Report - 2001-06 Report
...piece of 1/8" Masonite board and then glued it to the vertical boards I had...

...still drying. The river bottom board was glued to the vertical supports so that there...

P & C Railroad Version 3 - Progress Report - 2001-07 Report
...bought, I created some rock castings and glued them to the mountain area covering the...

My Layouts - First Layout
...from time to time. Nothing was ever glued to the bookcase. The double-mainline terminated at...

The PRR Chartiers Branch - Layout Design
...out of 3.5" (8.9cm) strips of plywood glued and screwed together. There will be three...

...15/16th of an inch strips of plywood glued, on their edge, to Masonite backdrop panels...

The PRR Chartiers Branch - Progress Report - 2008-11 Report
...the correct angle. Using wood glue, I glued each of the blocks in their location,...

...them, pushed them onto the wires, and glued them down to the module's base. These...

The PRR Chartiers Branch - Progress Report - 2008-12 Report
...my Foam Roadbed article, I glued the foam down and then wound up...

...is made out of 1/2-inch ceiling tile glued to the MDF sub-roadbed (see my...

...ceiling tiles. These were then cut and glued to the MDF after it was installed....

...section of roadbed has been installed. I glued the ties down, and then applied the...

The PRR Chartiers Branch - Progress Report - 2009-02 Report
...bridge abutments . They are not yet glued down in the next photo. I painted...

...are to go. Next, I cut and glued the wooden ties for this section of...

The PRR Chartiers Branch - Progress Report - 2009-12 Report
...out using a fret saw. Next, I glued pieces of 1/2-inch MDF (and one 3/4-inch...

...while plugged in. The shelf will be glued to the back of the panel. I...

...back of the panel. I cut and glued the angle brackets to the top of...

...of failure. Here the board is being glued to the shelf. The LEDs are near...

The PRR Chartiers Branch - Progress Report - 2010-01 Report
...layout. This photo shows the board being glued in place on the right-hand side of...

The PRR Chartiers Branch - Progress Report - 2010-03 Report
...strips of cardboard. Those need to be glued to something. The way I designed my...

The PRR Chartiers Branch - Progress Report - 2010-04 Report
...the profile board in place. These were glued together with wood glue first. Next, I...

...together with wood glue first. Next, I glued them in place, gluing both the benchwork...

...strips of cardboard were first bent and glued to the profile board in the back....

...it just fits under the sub-roadbed, and glued it in place. After I did a...

The PRR Chartiers Branch - Progress Report - 2010-08 Report
...the recently-added 3-inch track extension bridge I glued a dead branch stuck on the trestle's...

...dropped them in place. All parts were glued down with a drop of superglue. Reflecting...

...pieces in the corner. The pieces were glued right next to the glass. The cutter...

...other angle. Close-up photo of the pebbles glued to the center of the creek. I...

...is close enough. I then cut and glued several small squares of styrene together on...

...I mixed up some 5-minute epoxy and glued the four-and-a-half foot tall post to the...

The PRR Chartiers Branch - Progress Report - 2010-10 Report
...a walkway across the creek. When I glued the ties down on the bridge, I...

The PRR Chartiers Branch - Progress Report - 2011-01 Report
...for my layout. Here's a longer one glued to the very front edge of the...

...the background, i.e. some forced perspective. I glued a couple of shorter ones behind the...

The PRR Chartiers Branch - Progress Report - 2011-05 Report
...of the fence. After that dried, I glued the whole thing to the poles I...

...the scenery and permanently installed the fence (glued to the side of the roadbed). This...

...marked its outline with a pencil, and glued it down with Aleene's Fast Grab Tacky...

...Grab Tacky Glue. The Tortoise is directly glued to the benchwork base. Five-minute epoxy glue...

The PRR Chartiers Branch - Progress Report - 2011-09 Report
..."L-girder" out of two strips of plywood glued together. The L-girder was attached to the...

The PRR Chartiers Branch - Progress Report - 2011-10 Report
...as desired. After clearing the flash, I glued the wench platform to the main assembly....

...made out of two 1/2-inch wooden blocks, glued together, that were then covered with left-over...

...structure kit. After weathering the wood, I glued the crane to it using Eileen Tacky...

...crane in its position. I have not glued it to the layout so that I...

The PRR Chartiers Branch - Progress Report - 2011-11 Report
...the creek. Most of that was also glued down in a similar manner, so it...

...this effect, make sure that everything is glued down and also consider vacuuming the area...

...the ones in the foreground are not glued to the layout, so I can pull...

The PRR Chartiers Branch - Progress Report - 2012-03 Report
...the bridge up. A small block is glued on the side to prevent the bridge...

The PRR Chartiers Branch - Progress Report - 2012-11 Report
...Model Tech Studios. Neither of these are glued down to the platform, so that I...

The PRR Chartiers Branch - Progress Report - 2013-01 Report
...this photo the flat "ground" is being glued in place (some heavy hand tools provide...

The PRR Chartiers Branch - Progress Report - 2013-04 Report
...form to the intended track plan. I glued the ceiling tile down to the plywood...

...of the layout. After the ties were glued in place, I used the handy tool...

...some home-made ballast left over, so I glued it along the slopes and in between...

...make these as barebones as necessary. I glued 8 ties to the board, as you...

...of solid wood, which, in turn, was glued to the cassette in front of the...

The PRR Chartiers Branch - Progress Report - 2013-09 Report
...parts from my scrap box and strategically glued those to the bottom of the styrene...

..."up ramps" from styrene. These were then glued to the tops of the ties on...

...moved it closer toward the front. I glued one section to the building, and used...

The PRR Chartiers Branch - Progress Report - 2013-11 Report
...This photo shows the first piece being glued in place. I used white glue, which...

...skinnier than the first one. I then glued two more layers of cork to represent...

The PRR Chartiers Branch - Progress Report - 2013-12 Report
...the next photo those two sheets are glued down (I used Aleene's Tacky glue). Then...

...could stagger the joints when I actually glued them in place. I used Aleene's Tacky...

...I cut some strips of cardboard and glued them to the module. They are not...

...them to the module. They are not glued to the walls. When you make the...

...the front edge of the module, and glued the castings in place using hot glue....

The PRR Chartiers Branch - Progress Report - 2014-01 Report
...layout. I liked the look, so I glued it to the side panel of my...

...so I cut strips of that and glued them to the edges of the foamboard,...

...I could hide the wiring. I simply glued the SMD LEDs directly to the exterior...

...lead magnet wire of each LED, and glued the resistors to the inside of the...

The PRR Chartiers Branch - Progress Report - 2014-02 Report
...which I had always intended to be glued to the glass. However, as I worked...

The PRR Chartiers Branch - Progress Report - 2014-06 Report
...the layout in the photo below. I glued two blocks of wood to raise the...

...the building up a bit. I then glued the building to those blocks. The structure...

...to those blocks. The structure is not glued to the backdrop, because that is supposed...

...nor the mechanisms are connected. I lightly glued them to the layout using Aleene's Tack...

...the wires through the hole, and then glued the crossing gate to the block of...

The PRR Chartiers Branch - Progress Report - 2008-07 Report
...handy for this type of work. I glued the spacer boards to the front board,...

...the spacer boards to the front board, glued the rear board to them, and then...

The PRR Chartiers Branch - Progress Report - 2008-09 Report
...inches long for this particular module. I glued 1/4-inch strips of Oak to one of...

...glue the other smaller board. Next I glued two pieces of 3/4-inch plywood as part...

...it is a very tough plastic. I glued the clips to another set of 3/4-inch...

...the light bar. The next day I glued the plywood boards to the light bar...

...strips for additional glue surfaces. I also glued two small Masonite cover plates at the...

...And finally, the front fascia panel was glued to the light bar. The next photo...

...bar. The module's backdrop panel will be glued to these vertical strips of plywood. To...

...be done there. The sheet is being glued to the vertical supports. I used a...

...top of the light bar, so I glued a piece of plywood to the top....

The PRR Chartiers Branch - Progress Report - 2008-10 Report
...on using two layers of insulation foam glued to a sheet of Masonite hardboard to...

Magazine Articles By Bob Walker
...he photographs and prints walls to be glued to structures. This is great for back-of-the-layout...

Magazine Articles By V.S. Roseman
...buildings. In this part the photos are glued to various low-relief structures so that they...

Magazine Articles By Category: Scratchbuilding
...he photographs and prints walls to be glued to structures. This is great for back-of-the-layout...

Magazine Articles By Category: Structures - Industrial
...buildings. In this part the photos are glued to various low-relief structures so that they...

N-Scale 2006-05/06 Articles
...buildings. In this part the photos are glued to various low-relief structures so that they...

Railroad Model Craftsman 2008-02 Articles
...he photographs and prints walls to be glued to structures. This is great for back-of-the-layout...

Background Building #1
...wall was not flat anymore, so I glued some more square styrene strips to force...

...windows are just two-pane ones, so I glued a strip of the same 1"x4" material...

...the center of the windows. I also glued some scale 2"x6" styrene strips on the...

...put pressure on the styrene sheet being glued to the building. I used 5-minute epoxy...

...going after the overall effect here. I glued individual pieces down in the first row,...

...the rest of the building. After I glued the foundation to the building (using superglue),...

...clear plastic for the windows, which were glued with Formula 560 canopy glue, just in...

...barrels were painted and weathered, and then glued to an L-shaped piece of styrene, and...

Bascule Bridge
...a piece of flat 3/4" plywood and glued four pieces of strip wood along it....

...favorite glue dispenser - the toothpick. I glued two 12-inch pieces of 2.5' x 2.5'...

...frame. After installing all the I-beams, I glued the other H-column span to the ends...

...across the whole structure. These beams are glued to the top side of the gusset...

...bottom and the two track support structures glued on top. The track supports have been...

...bridge span (277 feet). The boards were glued to 12" x 12" strip boards underneath...

...them prototypical - just functional. I then glued the board walk supports. They are 2.5...

...walk on the frame; it is not glued down yet. Now that the bottom frame...

...of the bridge have been cut and glued into place. This is just a temporary...

...trimmed each of the four corners, and glued it on top of the intersection. It...

...channel beam with two strips of styrene glued to the edges of the flat side...

...it! Whenever plastics still need to be glued onto a structure, I will not pre-paint...

Canonsburg Steel & Iron Works
...Cement. After some filing and trimming, I glued the foundation to the base. The plan...

...you have to improvise. I cut and glued two pieces to the long edges of...

...painted them with Floquil's "Rail Brown" and glued them to the base using 5-minute epoxy....

...was all I had in stock. I glued them to the painted foundation using super...

...60-grid sandpaper. This should simulate wood. I glued the back wall to the foundation and...

...through. Before closing up the structure, I glued clear styrene behind the window panes using...

...obviously empty interior of the structure. I glued some 3/16th inch metal siding from Evergreen....

...with Polly Scale's Aluminum (one coat), and glued fascia panels to the front edge of...

...using Polyscale's "DRGW Building Brown". I also glued some clear styrene behind the windows at...

Canonsburg Milling
...this photo is the concrete foundation. I glued scale two-foot tall styrene strips around the...

...that the structure's walls are thick. I glued a strip above the roof line on...

...layout. I cut some small walls and glued them to the inside edge of the...

...weights. I then cut the openings and glued the doors into the brick sheet. The...

...give it some more support. I then glued a strip of scale 4" wide styrene...

...roof of the first section. Next I glued sheets of 0.030" styrene to act as...

...complete the basic structure, I cut and glued a strip of brick along the inside...

...inside of the exposed wall (these are glued to the 4" strips mentioned above). And...

Canonsburg Passenger Station - Right Wall Construction
...the 4" side vertical). Under that I glued successively smaller strips, namely 1"x4", 1"x3", and...

Canonsburg Passenger Station - Bay Window Construction
...decorative openings on either side. I then glued the wall to the styrene backing, as...

...stuck out at the joints. I then glued the wall section to the main wall....

...a section of various pieces of styrene glued together "offline". I then cut three sections,...

..."offline". I then cut three sections, and glued them to the top of the styrene...

Canonsburg Passenger Station - Left Wall Construction
...away from the styrene backing and then glued it to the bay window area. This...

Deck Plate Girder Bridge - Deck Plate Girder Bridge
...0.030" thick styrene. I carefully cut and glued scale 7-inch strips of 0.015" styrene, and...

...scale 7-inch strips of 0.015" styrene, and glued them to the tops and bottoms of...

...simulated the L-shaped brackets with thin strips glued to the inside corners. The profile is...

...location so the bridge's pedestals were initially glued in the wrong location (too wide). I...

...wrong location (too wide). I cut and glued new ones in place, which you might...

...mine from two strips of styrene, meticulously glued together. And now we are ready to...

...down with some metal weights while the glued set for the two strips. The cross...

...plates on the bottom were cut and glued next. I then glued some L-brackets to...

...were cut and glued next. I then glued some L-brackets to the top of the...

...to the same length. These angles were glued to the top and bottom edges of...

...girders. Here the top one is being glued in place. The vertical angles were cut...

...held them down with some weights and glued two temporary strips on the tops to...

Deck Plate Girder Bridge - Removable Deck Plate Girder Bridge
...board would stay straight over time, I glued two 1/4"-thick pieces of plywood, one on...

...of which the bridge will rest. I glued one block to one side of the...

...the support. The other block will be glued in place once the bridge is finished....

...once the bridge is finished. Next, I glued sections of 0.010" styrene to the bottom...

...of wood. When that was dry, I glued some scale 4" styrene angles to the...

Furniture Factory - Main Factory Building
..."Aged Concrete" color. Next, this assembly was glued to the bottom of the structure, shown...

...appear aged. The LEDs have been installed (glued with 5-minute epoxy), and a toothpick has...

...temporary power, and the second floor/roof assembly glued into place in the structure. Before I...

...of the area under the platform. I glued some tall weed grasses and some foam...

...You might have also noted that I glued open doors in place. These were made...

...trimmed them to size, painted them, and glued them in position. External Reference:...

Furniture Factory - Lumber Shed
...weights to make sure the walls are glued in the correct location. If you look...

...for quick references. Both side walls are glued into place. (total pieces of wood: 278)...

...Three 8x8 columns of different lengths are glued together via four 2x6 boards. The weights...

...One more horizontal 2x6 needs to be glued in the upper portion of the wall,...

...to which the boards need to be glued fairly, horizontal. After gluing them up, I...

...8x8 poles of the interior racks I glued some 4x8's to the rear wall. I...

...here, and some pieces of wood were glued in-place on the racks. No cheating here!...

...on the racks. No cheating here! I glued full-length boards of various shapes and sizes...

...the ones in the photo above are glued into place. There are 195 pieces of...

...to show the walkway already installed. I glued those boards together on the workbench. After...

...the workbench. After they dried, I carefully glued the walkway to the structure. Next, I...

...the walkway to the structure. Next, I glued the walkway support boards (3x7's) under the...

...down quickly and firmly. The panels were glued to the roof structure using 5-minute epoxy....

Furniture Factory - Diorama
...a more appropriate base color. I then glued the lumber storage shed to the diorama...

...just cut two 7-1/2' of fencing material, glued in at an angle, to cover the...

...photo below shows the grasses and bushes glued in place. I purposely left the center...

...sprayed them with Testors Dullcoat, and then glued them on the diorama with 5-minute epoxy....

...building, and a third crate will be glued to the truck's bed later. I couldn't...

Lumber Storage Shed
...glue was drying. I then cut and glued two additional 12"x12" beams in between the...

...walls are 16.5 feet deep/wide. I then glued a 3"x6" along the bottom and two...

...the boards stayed together nicely. I then glued the vertical boards on the outside edges....

...various studs and cross braces. I first glued the vertical studs at 2-foot centers, as...

...small pieces of cross braces that I glued in between the studs. These were all...

...16.5 feet tall. Again, using angles, I glued the back wall perpendicular to the first...

...as best as I could. Next, I glued strips of 5x6 boards in between each...

...the vertical boards of the handrail were glued to the front face of the platform....

O'Brien Steel Construction Co. - Construction
...small roof support pieces need to be glued into the slots on those two smaller...

...and the front fascia board having been glued to the short side of the L-shaped...

...the layout. They have not yet been glued together. The next step is the construction...

...The photo also shows the first tread glued in place. For the other staircase I...

...just a lot of them. I also glued the end panels to the rafters. The...

...kit's design. None of the sections are glued to each other, because I want to...

...out. I think they are to be glued to the back of the window opening....

...insert the panes in the window opening, glued with white glue. The back of the...

...the larger roof's glue was dry, I glued the top, canopy part to it. Here's...

...usually in the dark shadow anyway. I glued the two freight doors in place next....

...instructions. The one on the right was glued mostly open. This adds a bit more...

...some interior modeling. That door was just glued to the back of the interior framing...

...back of the interior framing that was glued to the structure first. You can see...

O'Brien Steel Construction Co. - Detailing
...carpenter's glue and some creative clamping, I glued the plywood to the structure. This makes...

...the base for the flooring. After I glued the strip wood pieces on top of...

...installed (highlighted by the orange circles). I glued those to the interior using Aleene's Fast...

...stripped two pieces of electrical wire and glued them to the inside of the structure...

...sprayed glue on the board and carefully glued the prints to the board. There are...

...then hand-painted the various colors. I then glued the detail parts into the structure. The...

...0.060" styrene channel (Evergreen part #261). I glued tiny strips of styrene to the ends...

...painted them using Polyscale "Flat Aluminum". I glued them such that one edge of the...

...the right side of the structure. I glued it to the outside corner of the...

...and a scratch-built wooden crate. I also glued the building down to a piece of...

Oil Pump Jack
...they offer is usable in N-scale. I glued a small piece of this chain to...

Structures - Outhouse
...the front of the structure. I then glued the LED to the inside roof using...

...in the next photo, I cut and glued two strips of brass to the bottom...

...the strips. For a test set-up, I glued two strips of brass to a piece...

Plate Girder Bridge
...side panels of the bridge, so I glued these square tubes to the inside of...

...I cut those diagonally, by eye. I glued them in place by eye. I placed...

...To simulate these bolt flanges, I simply glued some 0.010" strip styrene to the outside...

Raiser Sharp Barber Shop
...It is two pieces of MDF board glued together with a piece of sandpaper glued...

...glued together with a piece of sandpaper glued to the bottom. This makes for a...

...glue into the entire inside corner. I glued the other side wall to the front...

...By the way, the sign has been glued to the building using Aleene's Tacky Glue....

...the wall in place. I then applied glued to all the joints to make sure...

Structures - Residence
...After the window frames were fitted and glued into the wall sections, she cut some...

Smitty's Rod-n-Reel
...go for the board-n-batten look, so I glued all the battens to the wall sections....

...mine out of scale half-inch brass wire, glued in place with superglue. The next photo...

...that the front porch board could be glued in place at the correct location, while...

...After soldering magnet wire to them, I glued one to the rafter in the building,...

...a piece of styrene tubing, and then glued it (after painting it) to the interior...

...small sign (using simple white paper) and glued that to a piece of 0.010" styrene,...

...comes with two small doves, so I glued those to the top of the sign...

Team Track Platform
...available and wouldn't need too often. I glued some 5x6 boards to those legs. These...

...carefully cut at the appropriate angles and glued to the main structure. I then went...

Trestle Bridge Diorama
...the diorama was fairly simple, so I glued the boards forming the basic "benchwork". Next,...

...the horizontal boards were to go. I glued them to the vertical posts using yellow...

...the end of the bridge have planks glued to them. These are supposed to act...

...sets of stained boards from accidentally being glued to each other, while still allowing all...

...be straight in this jig. Next, I glued bridge ties to the boards. Special long...

...cars. After the platform was finished, I glued the bents to the bottom of the...

...bridge's construction). Code 40 rail sections were glued to the top of the ties using...

...the nearly completed diorama I took. I glued up some code 40 rail sections on...

Trestle Extension
...photo shows the first bulkhead plank being glued to the two poles. What made this...

...against the edge of the module. I glued it to the inside edge of the...

...photo shows the first two stringers being glued to a cap. The cap near the...

...background you can see the two caps glued to the four stringers. I am building...

...an exact fit for the installation. I glued the cap/stringer assembly to the abutment using...

...placed them on a jig's lines, and glued a scale 4"x10" board diagonally across them....

...drying. When the glue was dry, I glued another board on the other side on...

...the two 12-degree outside legs. I then glued them under the pole caps. Next, I...

Structures - N-scale Turntable - Bridge
...the rail and getting ready to be glued down to the bridge. I cleared a...

Scratch-built Turntable - Diamond Scale N-135 Kit
...panels. The drive motor detail is just glued to the underside of the bridge ends....

Scratch-built Turntable - Base
...matching piece of 1/8" Masonite board and glued it to the bottom of the entire...

...easily painted and weathered later on. I glued the styrene to the MDF pit walls...

...be used later. Using 5-minute epoxy I glued the brass sleeve in the center hole....

...second support point for the shaft. I glued the two 1.5"x3" pieces of MDF to...

...the board. Just like above, I then glued the bushing in the center hole with...

...to use at the time. I then glued this assembly to the bottom of the...

...other article) can now be installed. I glued a block of MDF in position such...

Scratch-built Turntable - Bridge Construction
...the rail and getting ready to be glued down to the bridge. I cleared a...

Scratch-built Turntable - Bridge Detailing
...the shape of the bridge's sides and glued them down. It was a simple scratch-building...

...spotlight. Then came the bridge's walkway. I glued some scale 3" by 10" boards cut...

...painted it a cream color. I then glued 0.010"-thick clear styrene to the back of...

...fit. By the way, both parts were glued to the wooden base with super glue....

...base with super glue. I had originally glued the door to the control cab closed...

...use. The horizontal handrail is now being glued in place. A metal weight was used...

...piece to the vertical posts. I just glued them one at a time. It went...

Structures - White Water Brewery
...colors and are relatively cheap. They were glued in place with Crystal Klear. To complete...

...I had in my scrap box. I glued them to the roofs with 5-minute epoxy...

glues
General Rolling Stock - Coupler Gauge
...with superglue. I thought about using other glues, such as rubber cement, but superglue works,...

S-scale Couplers - Sergent Couplers - Old Design
...the back. Capillary action takes over and glues them almost instantaneously. I made sure to...

Trackwork - Roadbed
...reasons. One, I tried a bunch of glues and none of them worked well. There...

Equipment - PRR RS-1 Road Switcher - Construction: Completion
...extremely bright! I tried all sorts of glues, but finally settled on using 5-minute epoxy....

P & C Railroad Version 3 - Progress Report - 2001-06 Report
...screw holes to deal with. Today's wood glues are so strong that this is a...

The PRR Chartiers Branch - Layout Design
...track (use foam or cork, and appropriate glues). One ON/OFF switch for entire layout....

Railroading Books - 303 Tips for Detailing Model Railroad Scenery and Structures
...Tips Workbench ideas, project trays, many tips, glues, and casting. 12 93 Where...

Railroading Books - Building Structures for Your Garden Railway
...Introduction 1 6 Plastic Cement, Glues, and Adhesives 2 13 Tools...

Magazine Articles By Bob Walker
... Tools Description: Bob covers several glues, but the majority of the article is...

...article quickly covers some of the standard glues modelers use, and some others not often...

...is also a short discussion on which glues to use with styrene. What You'll Need...

Magazine Articles By Jack Verducci
...light fixtures for inside the house. Structures: Glues, Adhesives, and Plastic Cements - Outdoor vs....

...Tools Description: This article describes which glues to use for which materials, especially as...

Magazine Articles By Wayne Wesolowski
...The never-ending quest for preserving paints and glues is discussed with the author providing the...

Magazine Articles By Category: Structures
...is also a short discussion on which glues to use with styrene.

Magazine Articles By Category: Tools
...Bob Walker Description: Bob covers several glues, but the majority of the article is...

...article quickly covers some of the standard glues modelers use, and some others not often...

...The never-ending quest for preserving paints and glues is discussed with the author providing the...

...and paint bottle carousel as examples. Structures: Glues, Adhesives, and Plastic Cements - Outdoor vs....

...Verducci Description: This article describes which glues to use for which materials, especially as...

Garden Railways 2009-04 Articles
...can be applied to any scale. Structures: Glues, Adhesives, and Plastic Cements - Outdoor vs....

...Tools Description: This article describes which glues to use for which materials, especially as...

Railroad Model Craftsman 2003-09 Articles
...is also a short discussion on which glues to use with styrene. Kitbashing a Railway...

Railroad Model Craftsman 2007-12 Articles
... Tools Description: Bob covers several glues, but the majority of the article is...

Railroad Model Craftsman 2010-05 Articles
...The never-ending quest for preserving paints and glues is discussed with the author providing the...

Railroad Model Craftsman 2011-06 Articles
...article quickly covers some of the standard glues modelers use, and some others not often...

O'Brien Steel Construction Co. - Construction
...include assembly tips, painting instructions, and which glues to use. Inside the large box is...

gluing
S-scale Vehicles - 1950 Oldsmobile 88
...so it is a simple matter of gluing an LED behind the glass. Of course,...

Hand-laying Track
...Ballast 12/22/2013 Creating and gluing ballast. 3. Aging the Ties...

Hand-laying Track - 1. Preparing and Installing Ties
...hands. However, because I stain after the gluing, I have to be careful about excess...

Hand-building Turnouts - Code 40 N-scale Turnout
...epoxy (the same glue I use for gluing all rail to the ties). Much to...

Hand-building Turnouts - Code 55 N-scale Turnout
...point rails are moving. The danger of gluing those rails down with this epoxy is...

Painting - Paint Drawer
...showing. At first I had thought about gluing the storage rack to the drawer bottom,...

N-scale Equipment - Kato Passenger Cars - Coupler Conversion
...the truck, creating a shim piece, and gluing the shim piece and coupler to the...

Scenery - Scenery Base
...I came up with the idea of gluing newspaper directly on top of the cardboard...

Scenery - Telegraph/Telephone Poles
...wood). After the stain dried, I finished gluing the florist wire brackets, which is what...

...center). You definitely want to stain before gluing. Next, I wanted to weather the poles....

Tools - Router Table
...here. I made the side panels by gluing 1 square Oak wood boards to the...

Tools - Small Tools
...help out in weighing parts down for gluing, as 90-degree corner jigs, laying track, etc....

...wall would be held in place while gluing. These are the two main parts. The...

Custom Track Solutions - Pivot Table
...takes me about a week (building track, gluing ties, installing the turnout, installing the Tortoise,...

...together using Liquid Nails for Foamboard. Before gluing the track to the board, I rounded...

Trackwork - Ballasting Flextrack
...because it takes about as much time gluing 12 inches of ballast as it does...

Trackwork - Roadbed
...use the Elmers glue. Then I tested gluing a basswood tie to the top of...

Woodworking - Layout Cabinets
...bottom. This photo shows my setup for gluing the four drawer sides together. I used...

...it in place. The tools needed for gluing the foam in the drawer are glue...

Woodworking - Portable Modeling Table
...the bottom half of the table. Before gluing the side pieces I chamfered their front,...

...that I marked on the sides. After gluing and clamping the three top pieces, the...

Woodworking - Work Table
...of the workbench in action! I am gluing up two of the panels for one...

Equipment - PRR FA-2/FB-2 Cab Units - Wobbly Units
...low. I built a small shim by gluing two 2"x3" scale strip styrene pieces together...

Equipment - PRR FA-2/FB-2 Cab Units - S-CAB
...that again with this install, by simply gluing three scrap pieces of styrene to form...

Equipment - PRR FM Flat Car - Construction: Frame
...is perpendicular to the long side. After gluing the other end piece, I had the...

...was then just a simple matter of gluing that separate piece on top of the...

Equipment - PRR FM Flat Car - Construction: Exterior Details
...tiny triangular pieces of 1x styrene and gluing them in place at an angle to...

...to length, doing some fine-tuning, and then gluing them in place. The brake shaft and...

Equipment - PRR GLa Hopper - Construction: Frame
...Next, it was a simple matter of gluing a 1"x4" strip vertically against the plate....

Equipment - PRR H21a Hopper - Construction: Frame
...notch, hence it is off-center here). After gluing the cross sill to the side sills...

...the car's "B" end (for "brake"). Before gluing the parts, I drilled out the holes...

...a matter of careful measuring, bending, and gluing of the piping. The brake parts were...

Equipment - PRR H21a Hopper - Construction: Body
...alike and have approximately the same slope. Gluing the sides to the outside of the...

Equipment - PRR H21a Hopper - Construction: Exterior
...a hole in the brake housing and gluing the brake wheel to it. I also...

Equipment - B&O M53 Box Car - Construction: Underbody
...followed the kit's instructions exactly for the gluing. Unfortunately it sits up too high, which...

...parts and moved along. When I started gluing the valve and other parts I realized...

...the valve for the future wire before gluing the valve in place. I completed the...

...strip wood for the flooring. I started gluing them down one by one using superglue,...

Equipment - PRR N5c Cabin Car - Construction: Wheels and Couplers
...just mimic this tiny detail by simply gluing some sections of brass wire directly to...

Equipment - PRR N5c Cabin Car - Construction: Completion
... 11/15/2010 After gluing the underframe to the body, I put...

Equipment - PRR NW2 Switcher - Sergent Couplers
...with. The curved top was simulated by gluing a scale 4" quarterround to a strip...

Equipment - PRR RS-1 Road Switcher - Construction: Completion
...I only removed the cover right before gluing. I used canopy glue to minimize the...

...fit the figure in the cab before gluing the seat down. I could only get...

...I could seal it all up by gluing the roof onto the model with 5-minute...

Equipment - PRR RS-1 Road Switcher - Construction: Body
...photo shows the set-up I used for gluing the steps to the front of the...

Equipment - PRR RS-1 Road Switcher - Construction: Chassis
...girder is truly flat and straight before gluing the two parts to it (I forgot...

Equipment - PRR RS-1 Road Switcher - Construction: Adding Details
...directly on top of the wood, before gluing it in place with superglue. The prototype...

Equipment - PRR X29 Box Car - Kit Construction
...of flash on this part too. Before gluing the underframe to the underside of the...

...between the center sill frame members before gluing it to the floor board. The lead...

Bear Creek & Eastern - Progress Report - 2006-08 Report
...to the spur's location, and I am gluing the sub-roadbed supports for the spur (see...

Bear Creek & Eastern - Progress Report - 2007-02 Report
...on it on my workbench. I completed gluing all the ties to the non-turnout areas....

Bear Creek & Eastern - Progress Report - 2008-01 Report
...drilled some holes into the boards before gluing them in place to hold the DCC...

Bear Creek & Eastern - Progress Report - 2008-03 Report
... 03/31/2008 03/31/2008 I am now gluing the 3/16" cork roadbed to the 1/4"...

Crystal Creek Module - Progress Report - 2005-05 Report
...white, and that is because I started gluing a paper template in place to help...

Crystal Creek Module - Progress Report - 2005-08 Report
...the module's "box" itself. Here I am gluing 1/8" Masonite hard board to the exterior...

P & C Railroad Version 3 - Progress Report - 2001-08 Report
...Happy with the track plan, I started gluing down the AMI roadbed. And then installing...

P & C Railroad Version 3 - Progress Report - 2001-09 Report
...on the photo. I had also started gluing some low bushes in various locations. The...

P & C Railroad Version 3 - Progress Report - 2002-12 Report
...view. In the photo below I am gluing pieces of 1/4" luaun board together. Next,...

P & C Railroad Version 3 - Progress Report - 2000-12 Report
...door. The L-griders are made out of gluing and screwing a 1"x2" and a 1"x4"...

P & C Railroad Version 3 - Progress Report - 2001-03 Report
...out the various pieces I cut and gluing them together. The sub-roadbed was held in...

The PRR Chartiers Branch - Progress Report - 2009-01 Report
...and I am in the process of gluing the ceiling tile to the new sub-roadbed....

The PRR Chartiers Branch - Progress Report - 2010-04 Report
...first. Next, I glued them in place, gluing both the benchwork contact surface and the...

The PRR Chartiers Branch - Progress Report - 2008-09 Report
...center). In the next photo I am gluing the first set of these to the...

...reliable. After this first module I started gluing the barrier strip to the back of...

Railroading Books - 303 Tips for Detailing Model Railroad Scenery and Structures
...Building bridges, creating cardboard mockups, fitting structures. Gluing, weathering, and installing buildings. Stone foundations....

Railroading Books - How to Build Realistic Model Railroad Scenery
...Step-by-step instructions on painting rock. Creating rubble. Gluing rubble and rock. Casting retaining walls 5...

...Various texture materials available on the market. Gluing texture. Ballasting track. Creating clutter. Using real...

Magazine Articles By Rene Gourley
...the NorthWest Short Line Duplicutter to simplify gluing repetitive parts that need to be properly...

Magazine Articles By Category: Tools
...the NorthWest Short Line Duplicutter to simplify gluing repetitive parts that need to be properly...

Railroad Model Craftsman 2007-10 Articles
...the NorthWest Short Line Duplicutter to simplify gluing repetitive parts that need to be properly...

Bascule Bridge
...is already in place on the layout. Gluing these three components together finally made the...

...been installed. Again, off to cutting and gluing more gusset plates. This time to make...

Canonsburg Steel & Iron Works
...part #4040. It fit almost perfectly. After gluing the door to the back of the...

Canonsburg Milling
...basic framework. In this photo I am gluing the first wall section to the frame...

...feet above the roof line. I am gluing a strip of 4" wide styrene to...

...inside wall. This is what I am gluing in place for the last section of...

...windows and doors of the structure, by gluing transparent plastic to the backs of those...

Canonsburg Passenger Station - Right Wall Construction
...as shown in the prototype photo, before gluing it in place.

Canonsburg Passenger Station - Bay Window Construction
...approximate this profile. I started off by gluing a base piece to the top of...

Canonsburg Passenger Station - Left Wall Construction
...a sliver of one row of bricks. Gluing took a bit of careful placement. This...

Furniture Factory - Main Factory Building
...in the photo on the right. After gluing this assembly to the bottom floor part,...

...the joists, I spent three days carefully gluing scale 2" x 6" boards onto the...

Furniture Factory - Lumber Shed
...need to be glued fairly, horizontal. After gluing them up, I placed a metal ruler...

...of boards already installed and I am gluing the bottom, first board of the middle...

...I have access to the areas for gluing. I used two ways of building the...

Furniture Factory - Diorama
...to show the wheels axles misaligned. Before gluing that one to the diorama, I put...

Lumber Storage Shed
...The next photo shows my set-up for gluing the left wall to the foundation. The...

O'Brien Steel Construction Co. - Construction
...glue dries. This was my set-up for gluing the front fascia board to the long...

...framing has removable paper to allow for gluing the frame to the door front. The...

Plate Girder Bridge
...hand. I prefer Testor's plastic cement for gluing styrene. Next, I needed to curve the...

Raiser Sharp Barber Shop
...In this photo is my set-up for gluing one of the side walls to the...

...the tension of the cable, so, while gluing the wall to the underside of the...

Smitty's Rod-n-Reel
...it was just a matter of carefully gluing it to the structure's floor sub-assembly (such...

Trestle Bridge Diorama
...two sets of support boards I am gluing up here. Various weights, clamps, and metal...

Trestle Extension
...dried, it was a simple matter of gluing the remaining planks to the poles. I...

Structures - N-scale Turntable - Bridge
...For the time being I am not gluing it into the bridge yet. This will...

...the soldered wire. Here's my set-up for gluing the rails down to the bridge. I...

Scratch-built Turntable - Bridge Construction
...For the time being I am not gluing it into the bridge yet. This will...

...the soldered wire. Here's my set-up for gluing the rails down to the bridge. I...

glx
General Rolling Stock - Dragline Buckets Load
... 08/27/2013 External Reference: GLX Scale Models, Inc....

...dragline buckets from Gilbert Lacroix, owner of GLX Scale Models, Inc. After reviewing the sizes...

gm
Research - PRR Diesel Locomotives
... Baldwin Locomotive Works "E" GM's Electro-Motive Division ("EMD") "F" Fairbanks-Morse...

Railroading Books - Pennsylvania Railroad Steel Open Hopper Cars
... 151 Footnote Classes Covers the GM, GV, GLa Odd, and Hcl classes and...

gmc
Magazine Articles By Matthew Snell
...locomotive service truck built from a Bolley's GMC Topkick tanker. Many close-up detail photos.

Magazine Articles By Category: Automobiles
...locomotive service truck built from a Bolley's GMC Topkick tanker. Many close-up detail photos. Scissors...

Railroad Model Craftsman 2007-04 Articles
...locomotive service truck built from a Bolley's GMC Topkick tanker. Many close-up detail photos. Visiting...

Magazine Articles for HO Scale
...locomotive service truck built from a Bolley's GMC Topkick tanker. Many close-up detail photos. Modeling...

gmlg
Magazine Articles By Rich Picariello
...superdetailing the models. Burlington Northern Santa Fe GMLG SD70MAC Magazine: Model Railroading 2003-04...

Magazine Articles By Category: Locomotives - Diesel
...superdetailing the models. Burlington Northern Santa Fe GMLG SD70MAC Magazine: Model Railroading 2003-04...

Model Railroading 2003-04 Articles
...S-1 diesel locomotives. Burlington Northern Santa Fe GMLG SD70MAC Page: 51 Author:...

gn
Railroading Books - Steam Locomotives Cyclopedia Volume 1
...Narrow Gauge 2-8-2 Class K28 81 GN 2-8-2 Class O8 82 ATSF 2-10-2...

... C&NW 4-4-2 Class D 121 GN 4-8-0 Class G1 124 SLSW 4-4-2...

... IC 4-6-2 (ex 2-6-2) 135 GN 4-6-2 Class H4 136 Harriman 4-6-2...

... CGA 4-8-4 Class K 235 GN 2-6-6-2 of 1906 236 C&O 2-6-6-2...

Magazine Articles By Edwin C Kirstatter
...one of wood on top of a GN flat car. More Loads for S Scale...

Magazine Articles By Gerry Doeksen
...unit acquired after the merger with the GN. Includes model and prototype photos, scale drawings,...

Magazine Articles By Mike Pearsall
...Painting a black Great Northern. Includes two GN prototype photos.

Magazine Articles By Russ Porter
...Hill, son of Louis Hill the famous GN magnate. The passenger car provided accommodations for...

Magazine Articles By Staffan Ehnbom
...Ehnbom 07/05/2014 GN Bethlehem Hopper Magazine: Railroad Model...

Magazine Articles By Thomas Jones
... 07/05/2014 Kitbashing a GN Boxcab Switcher Magazine: Railroad Model...

Magazine Articles By Category: Freight Car Loads
...one of wood on top of a GN flat car. Open Loads of Fun Magazine:...

Magazine Articles By Category: Freight Cars - Hoppers
...article about these narrow gauge hopper cars. GN Bethlehem Hopper Magazine: Railroad Model...

Magazine Articles By Category: Locomotives - Diesel
...unit acquired after the merger with the GN. Includes model and prototype photos, scale drawings,...

Magazine Articles By Category: Locomotives - Electric
...line. Photos and O-scale drawings. Kitbashing a GN Boxcab Switcher Magazine: Railroad Model...

Magazine Articles By Category: Locomotives - Steam
...Painting a black Great Northern. Includes two GN prototype photos. Heavy Pacific and Mikado Magazine:...

Magazine Articles By Category: Passenger Cars
...Hill, son of Louis Hill the famous GN magnate. The passenger car provided accommodations for...

Model Railroader 1984-12 Articles
...Painting a black Great Northern. Includes two GN prototype photos.

NASG Dispatch 2010-10 Articles
...one of wood on top of a GN flat car. North Carolina Portable Switching Layout...

Railroad Model Craftsman 1972-03 Articles
...Hill, son of Louis Hill the famous GN magnate. The passenger car provided accommodations for...

Railroad Model Craftsman 1973-09 Articles
...unit acquired after the merger with the GN. Includes model and prototype photos, scale drawings,...

Railroad Model Craftsman 1991-06 Articles
...the start of the project. Kitbashing a GN Boxcab Switcher Page: 55 Author:...

Railroad Model Craftsman 1996-02 Articles
...module that is strong, durable, and light. GN Bethlehem Hopper Page: 99 Author:...

Magazine Articles for N Scale
...unit acquired after the merger with the GN. Includes model and prototype photos, scale drawings,...

Magazine Articles for O Scale
...track plan and many photos. Kitbashing a GN Boxcab Switcher Magazine: Railroad Model...

Magazine Articles for S Scale
...one of wood on top of a GN flat car. More Loads for S Scale...

gn1-1/4
Railroading Books - Model Railroad Planning 2004
...Wye through an Outside Wall 98 Gn1-1/4 in 1 x 3 269 The...

gn15
Railroading Books - 52 Micro Layouts You Can Build
...Introduces the author 's One Squary Foot Gn15 layout, including the design diagram. 3...

...started work on his One Squary Foot Gn15 layout. 4 13 Bookshelf Lines...

Magazine Articles By Thomas A. Yorke
...Description: The model is built to Gn15 scale. These cars were used to pull...

Magazine Articles By Category: Locomotives - Steam
...Description: The model is built to Gn15 scale. These cars were used to pull...

Railroad Model Craftsman 2005-10 Articles
...Description: The model is built to Gn15 scale. These cars were used to pull...

Magazine Articles for G Scale
...Description: The model is built to Gn15 scale. These cars were used to pull...

gn3
Railroading Books - Great Model Railroads 1995
... 88 A Jewel of a Gn3 Layout Author: George Hall. Ron Ritchner's Meadowbrook...

Railroading Books - Great Model Railroads 1997
...Crossing in Z-scale 50 Bob Walter's Gn3 Silverton, Moosehead & Sierra 60 Ride...

Railroading Books - Model Railroad Planning 1998

go-by
Equipment - PRR X29 Box Car - Kit Construction
...not necessarily use my part-layout as a go-by. I found some screws that matched the...

Magazine Articles By Gerry Leone
...in-laws' real farm in Minnesota as a go-by for building this model. There are many...

Magazine Articles By Category: Structures - Homes
...in-laws' real farm in Minnesota as a go-by for building this model. There are many...

Railroad Model Craftsman 2008-02 Articles
...in-laws' real farm in Minnesota as a go-by for building this model. There are many...

Magazine Articles for HO Scale
...in-laws' real farm in Minnesota as a go-by for building this model. There are many...

goal
Scenery - Foreground Trees
...high-quality foreground trees. This has been a goal of mine since I started the hobby...

The PRR Chartiers Branch - Progress Report - 2012-07 Report
...buried in dirt, so that was my goal with this spur. I planted a dead...

goals
P & C Railroad Version 4 - Progress Report - 2003-04 Report
...believe I have accomplished one of the goals - to have a finished, appealing room...

Magazine Articles By Jack Burgess
...hold two pieces of rail. Refining Your Goals Magazine: Railroad Model Craftsman 2011-01...

Magazine Articles By Category: Layout Construction
...he built recessed fascia panels. Refining Your Goals Magazine: Railroad Model Craftsman 2011-01...

Railroad Model Craftsman 2011-01 Articles
...information for such a structure. Refining Your Goals Page: 71 Author: Jack...

Magazine Articles for HO Scale
...Peoria & Western GP38-2 diesels. Refining Your Goals Magazine: Railroad Model Craftsman 2011-01...

goat
Magazine Articles By David Lustig
...RTD Series 100-153 LRV's. Meet the Green Goat Magazine: Model Railroader 2006-01 Page:...

...- Diesel Description: RailPower Technologies' Green Goat is a 2,000-hp switcher engine that uses...

Magazine Articles By Category: Locomotives - Diesel
...model and prototype photos. Meet the Green Goat Magazine: Model Railroader 2006-01 Page:...

...David Lustig Description: RailPower Technologies' Green Goat is a 2,000-hp switcher engine that uses...

Model Railroader 2006-01 Articles
...in the modern era. Meet the Green Goat Page: 68 Author: David...

...- Diesel Description: RailPower Technologies' Green Goat is a 2,000-hp switcher engine that uses...

goehmann
Magazine Articles By Author
...F. Smith - 6 articles Bruce Goehmann - 2 articles Bruce Leckie...

Magazine Articles By Bruce Goehmann
My Library - Magazine Articles By Bruce Goehmann My Library - Magazine Articles By Bruce...

...My Library - Magazine Articles By Bruce Goehmann 07/05/2014 Adding...

Magazine Articles By Category: Modules
...Page: 82 Author: Bruce Goehmann Scale: HO Description: The author...

Magazine Articles By Category: Scenery - Trackside
...Page: 82 Author: Bruce Goehmann Scale: HO Description: Provides a...

Model Railroader 1985-10 Articles
...Page: 82 Author: Bruce Goehmann Category: Modules Scale: HO...

Model Railroader 1989-02 Articles
...Page: 82 Author: Bruce Goehmann Category: Scenery - Trackside Scale:...

Magazine Articles for HO Scale
...Page: 82 Author: Bruce Goehmann Category: Scenery - Trackside Description:...

...Page: 82 Author: Bruce Goehmann Category: Modules Description: The...

goeppingen
Magazine Articles By Dennis Burnside
...includes information about visiting the company in Goeppingen near Stuttgart, Germany.

Magazine Articles By Category: Model Railroad Manufacturers
...includes information about visiting the company in Goeppingen near Stuttgart, Germany. Richard "Dick" Truesdale And...

Model Railroader 1992-05 Articles
...includes information about visiting the company in Goeppingen near Stuttgart, Germany. Railroading with Marklin Page:...

goes
Hand-laying Track - 1. Preparing and Installing Ties
...sheet that cannot be safely ripped. That goes into the scratch-building supplies drawer. I cut...

Hand-building Turnouts - Code 83 S-scale Turnout
...solder in between the rails. Sometimes solder goes where I didn't intend for it to...

Painting - Airbrush Setup
...search (I had done several before; just goes to show how important the correct keywords...

Chartiers Branch - Track
...interchange tracks, siding with two tracks, last goes to PWVA 0.8 66'...

General Rolling Stock - Vertical Engine Load
...the thin wire for the pole that goes in between the frames. I found a...

N-scale Equipment - Atlas RS-1 - Disassembly
...the frames. The nut that the screw goes into can easily fall out of the...

N-scale Equipment - Life-Like SW9 - DCC Conversion
...length (2.54cm), and the gray wire, which goes under the motor, is a bit longer...

...motor. The one with the gray wire goes first and is installed in the bottom...

...make up the brush. The metal cylinder goes into the motor. Then carefully place the...

...other brush cap, the orange wire, which goes on top of the motor. The motor...

...short contact strip with the black wire goes into the left side between the plastic...

N-scale Equipment - Rivarossi 2-8-8-2 - DCC Conversion
...place. The arch of the clip actually goes over the inside edge of the metal...

Scenery - Conifer Trees
...trash can. Note that everywhere this spray goes will be sticky for quite some time....

Scenery - Scenery Base
...the scenery base I described above. It goes on really easily, and it stays workable...

Storage - Strip Storage
...all of my PVC tubes as time goes on.

Custom Track Solutions - Helix
...is where the distance says 0" and goes around clock-wise. We came up with these...

...do they interfere with the track that goes around them to the storage yard in...

Woodworking - Layout Cabinets
...the middle. That is the guide that goes in between the two solid Oak strips...

...becomes more of a mass-production process and goes quite smoothly. I then put glue on...

Equipment - PRR FA-2/FB-2 Cab Units - S-CAB
...a hole. That is where the screw goes in to attach the frame to the...

...said he used the same one that goes on the BPS board, which is a...

Equipment - PRR FM Flat Car - Construction: Frame
...Chopper II for that angled cut, which goes a lot faster and is more accurate)....

Equipment - PRR FM Flat Car - Construction: Decking
...place. The shaft of the brake wheel goes all the way through the car body....

Equipment - PRR H21a Hopper - Construction: Body
...cut a small 2x4 filler piece that goes against the side sill of the frame....

Equipment - B&O M53 Box Car - Construction: Underbody
...will do the same, except that it goes through the remaining three cross bearers. To...

...out how to attach the wire that goes between the brake levers. The part sprue...

Equipment - B&O M53 Box Car - Construction: Painting
...sill. Nothing is glued down. The coupler goes in next. I have to hold it,...

Equipment - PRR N5c Cabin Car - Construction: Exterior
...their spots. The tiny rectangular brass grill goes into the rectangular hole in the side...

Equipment - PRR N5c Cabin Car - Construction: Interior Lights
...lamp with Formula '560' canopy glue. It goes in white, but it dries clear. I...

Equipment - PRR NW2 Switcher - Motor Replacement
...motor should snap out. The new motor goes in easily. Adjust the U-joints so that...

Equipment - PRR NW2 Switcher - S-CAB
...those same buttons again and the light goes off. If you solder the brown wire...

Equipment - PRR RS-1 Road Switcher - Construction: Conclusion
...Houston. Building the body of the kit goes fairly quickly (considering the overall time table...

Equipment - PRR RS-1 Road Switcher - Electrical Short
...and tightened up the sideframe assembly. It goes together well and it provides the electrical...

Equipment - PRR RS-1 Road Switcher - Construction: Adding Details
...like the left side of the pipe goes through the walkway and into the fuel...

Equipment - PRR X29 Box Car - Kit Construction
...the door hanging rail at the top goes out as far to the right as...

Equipment - PRR X37 Box Car - Construction
...give you a hint as to what goes where. I also consulted some online resources...

...of 0.019" phosphor bronze wire. The line goes under the body at an angle, and...

...and two small ones. One large board goes on each door. There are no mounting...

...The bottom end of the mounting bracket goes on the top rib of the bottom...

...bottom five dreadnaughts, and the top bracket goes onto the second one from the bottom...

Bear Creek & Eastern - Layout Design
...curves into the center section, one line goes up in elevation, while the other goes...

...goes up in elevation, while the other goes down. On the left-hand side of the...

P & C Railroad Version 2 - Progress Report - 2000-09 Report
...makes the road look like it indeed goes into the mountain. All the foam has...

P & C Railroad Version 3 - Progress Report - 2001-04 Report
...flextrack has been installed. Because the mainline goes in front of the door, there had...

P & C Railroad Version 3 - Progress Report - 2001-06 Report
...I wanted to install a bridge that goes over some low-lying farm land. Since this...

P & C Railroad Version 4 - Layout Design
...in area B. From there the track goes around to various towns and cities. A...

The PRR Chartiers Branch - Progress Report - 2010-04 Report
...each glue spot to dry and it goes remarkably fast. Here's the finished section. I...

The PRR Chartiers Branch - Progress Report - 2010-08 Report
...to create some subtle waves. The material goes on white like white glue, but after...

The PRR Chartiers Branch - Progress Report - 2011-08 Report
...the glue. By the way, the wire goes in between the two stacked insulators. When...

Railroading Books - The Fabulous Franklin & South Manchester Railroad Vol 1
...next to each of the photos. He goes into detail describing how he built a...

Magazine Articles By Andy Romano
... O Description: This shelf layout goes around three walls of the author's two-car...

Magazine Articles By Boyce F. Martin
...track crosses a trestle bridge and immediately goes into a tunnel on the other side,...

Magazine Articles By Bruce F. Smith
...the prototype over its long history, and goes into great depth of the electronics in...

Magazine Articles By Dave Allen
...a 12' x 15' bedroom-size layout that goes around the walls, with a peninsula added,...

Magazine Articles By Henry Ellett
...scenery. Includes a road with bridges that goes under the track.

Magazine Articles By John Socha-Leialoha
...fool the viewer into thinking the train goes somewhere when in reality it goes into...

...train goes somewhere when in reality it goes into a hidden tunnel for staging.

Magazine Articles By Kevin Strong
...real-coal load form-fitted to the electronics that goes into the tender. The Numbers Game Magazine:...

Magazine Articles By Category: Layout Construction
...fool the viewer into thinking the train goes somewhere when in reality it goes into...

...train goes somewhere when in reality it goes into a hidden tunnel for staging. Fun...

Magazine Articles By Category: Layout Detailing
...track crosses a trestle bridge and immediately goes into a tunnel on the other side,...

Magazine Articles By Category: Layouts
...a 12' x 15' bedroom-size layout that goes around the walls, with a peninsula added,...

Magazine Articles By Category: Layouts - O
... O Description: This shelf layout goes around three walls of the author's two-car...

Magazine Articles By Category: Locomotives - Electric
...the prototype over its long history, and goes into great depth of the electronics in...

Magazine Articles By Category: Locomotives - Steam
...real-coal load form-fitted to the electronics that goes into the tender. D&RGW Standard-gauge Mikados Magazine:...

Magazine Articles By Category: Modules
...scenery. Includes a road with bridges that goes under the track. Ntrak Sets a World's...

Garden Railways 2008-08 Articles
...real-coal load form-fitted to the electronics that goes into the tender. Aquatics Have Wet Feet...

Model Railroader 1978-02 Articles
...track crosses a trestle bridge and immediately goes into a tunnel on the other side,...

Model Railroader 2005-04 Articles
...a 12' x 15' bedroom-size layout that goes around the walls, with a peninsula added,...

N-Scale 2003-07/08 Articles
...scenery. Includes a road with bridges that goes under the track. Fred Without Limits Page:...

N Scale Railroading 2005-09/10 Articles
...fool the viewer into thinking the train goes somewhere when in reality it goes into...

...train goes somewhere when in reality it goes into a hidden tunnel for staging.

O Scale Trains Magazine 33 July 2007 Articles
... O Description: This shelf layout goes around three walls of the author's two-car...

The Keystone Modeler 02 September 2003 Articles
...the prototype over its long history, and goes into great depth of the electronics in...

Magazine Articles for G Scale
...real-coal load form-fitted to the electronics that goes into the tender. Designing a Garden Railway...

Magazine Articles for HO Scale
...the prototype over its long history, and goes into great depth of the electronics in...

...track crosses a trestle bridge and immediately goes into a tunnel on the other side,...

...a 12' x 15' bedroom-size layout that goes around the walls, with a peninsula added,...

Magazine Articles for N Scale
...fool the viewer into thinking the train goes somewhere when in reality it goes into...

...train goes somewhere when in reality it goes into a hidden tunnel for staging. Forest...

...scenery. Includes a road with bridges that goes under the track. Ntrak Sets a World's...

Magazine Articles for O Scale
...- O Description: This shelf layout goes around three walls of the author's two-car...

My Library - Photo Albums - PRR FM Flat Car
...end sill was formed. The brake line goes through the framing members. A different kind...

My Library - Photo Albums - Southern Forest Heritage Museum
...currently "on". The belt on the left goes down to the machine in front of...

Railroading Videos - Great Model Railroads Vol 24
...buildings. At Big Falls trestle the scenery goes all the way to the floor! In...

Structures - Dog Houses
...instruction's diagram order. Also, the structure itself goes together well due to the tab-and-slot method...

Furniture Factory - Main Factory Building
...you can see in the photo, it goes on milky-white, but dries clear. It acts...

O'Brien Steel Construction Co. - Construction
...those two smaller walls. The wider one goes on the left and the skinnier one...

...building's walls are done. Now the focus goes to the delivery platform. This photo shows...

...wide on the left side, where it goes in between the two walls. A simple...

...consists of two parts. The skinnier part goes against the side-facing walls, and the wider...

...the side-facing walls, and the wider part goes against the front-facing walls, overlapping the edge...

Oil Pump Jack
...board. This is where the metal rod goes "under ground". I used 5-minute epoxy to...

Raiser Sharp Barber Shop
...in the same manner. The rear wall goes in between the side walls, and I...

gogebic
Railroading Books - Great Model Railroads 2013
...built his HO-scale Mineral Point & Northern Gogebic Division layout in 9 months. His layout...

going
DCC - S-CAB
...box revealed these parts (from upper left going clockwise): the USB cable used to recharge...

DCC - Tsunami Decoder Programming
...of track. Note that if you are going to use a separate, dedicated programming-only track,...

Electronics Projects - Flickering Lights
...have the LED produce a flicker without going off or being full-on. If you have...

Electronics Projects - Helix Elevator Lights
...are to be located. The basswood is going to be glued to the sides of...

Electronics Projects - LEDs
...side-effect of controlling the amount of current going through an LED is that the amount...

...use to run our LED. We are going to assume a simple circuit that turns...

...out or aging rapidly, we are only going to provide it with 10mA of current...

Electronics Projects - Tortoise Pushbutton Control
...my parts box. The circuit I am going to build requires some additional parts. You...